Military Engineer Services-MES has published Tender For Special Repair To Flooring Joinery And Rewiring To Bldg No T-49 At Sasoma And Bldg No T-65 At Base Camp Under Ge Partapur. Submission Date for this Tender is 18-10-2023. Electrification Work Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets. |
| 3 | Dismantling timber framed in fillets, rails, posts rafters, purlines, etc under 40 Sq cm in section. |
| 4 | Dismantling of plain of corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering. |
| 5 | Takingdown chowkats or frames with shutters (without taking offf shutters from the frames) not exc. 1.5 sqm each. (Steel/Wooden) |
| 6 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.(Steel/Wooden) |
| 7 | M&L 9 mm thick prelaminated partical board, interior grade ,prelaminated one side withdecorative choice lamination and other side balancing white lamination ,fixed with nails as in wall panelling, complete all as specified and directed by Engr-in-charge.. |
| 8 | M&L 9 mm thick prelaminated partical board, interior grade ,prelaminated one side withdecorative choice lamination and other side balancing white lamination ,fixed with nails as in ceiling works, complete all as specified and directed by Engr-in-charge.. |
| 9 | M&L second class softwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm. |
| 10 | M&L second class softwood plain fillets, rectangular in section,clean swan, secured with nails exc 3 and n.exc 6 Sqcm complete all as specified and directed by Engr-in-charge. |
| 11 | M&L 25mm thick plain cment concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate) as in floor directed by EIC. |
| 12 | M&L fornon skid coloured ceramic tiles7 to 8 mm thick (Square / rectuangular) area of each tiles not exc 0.11 sqmas in flooretc set and jointed in neat cement slurry and pointed with colour cementto match the tiles laying over and including 15mm thick screed bed in cm 1:4 etc all as specified and as directed by EIC. |
| 13 | M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 14 | M&L for providing precast cement concrete Type C1, 1:3:6 (20mm stone aggregate) solid building blocks or slabs 10 cm thick (with plain or interlocking joints as directed) setting in CM 1:6 complete, in walls. |
| 15 | S&F Galvanised MS sheeting of 0.63mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hooks two framed work with PVC and steel washers as in roof & wall with Zinc coating of 275. |
| 16 | S&F plain, galvanised MS sheeting of 0.63mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 |
| 17 | S&F steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete all without glazing bars devetailed or welded. |
| 18 | S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints. |
| 19 | S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats |
| 20 | S & F butt hinges 100mm mild steel cold rolled, medium weight. |
| 21 | Supply & fixin repairs MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed. |
| 22 | Supply & fix in repairs MS barrel tower bolt 150mm long stove enamelled black, complete all as specified. |
| 23 | S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed, complete all as specified and directed. |
| 24 | S&Ffor sheet 5.0mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane. |
| 25 | M&L for painting to new wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc complete |
| 26 | M&L for preparation of newly steel surface of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide. |
| 27 | M&L for preparation of old painted surface of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint. |
| 28 | S & F Curtain rail Harrison rails, mild steel, chromiumplated with fixing brackets, stops,rollers etc and fixed, complete all as specified and directed. |
| 29 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 30 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and fixed, complete all as specified and directed. |
| 31 | S & F Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and fixed, complete all as specified and directed. |
| 32 | S & F Hat pegs soat hooks Aluminium solid body,175 mm to 250 mm and fixed, complete all as specified and directed. |
| 33 | Supply & fix in repairs extruded aluminium alloy handles, fabricated type, anodised 125 mm size, complete all as specified and directed. |
| 34 | M&L 100mm thick plain cment concrete 1:4:8 type B-2 using 40mm graded crushed stone aggregate) as in floor. |
| 35 | M&L for 20mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4complete all as specified and directed. |
| 36 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment. |
| 37 | Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 75 mm thickas in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair ontop without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight). |
| 38 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:4 including with using watre proofing compound. |
| 39 | RCC design mix M-30 in beams/lintels supported on walls, beams and column in floors, roofs, landings, balconies, canopies, complete |
| 40 | M&L for TMT bars mild steel bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D. |
| 41 | Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed. |
| 42 | Taking down of MCB DB/TPN 8way/12way including mcb sp and spn and making good of wall complete all as specified and directed. |
| 43 | M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws. |
| 44 | (a) One light point controlled by one 5 Amps one way switch |
| 45 | (b) One 3 pin socket outlet 5 Amps on independent board |
| 46 | (c) One 3 pin socket outlet 5 Amps on same board |
| 47 | M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run)with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws. |
| 48 | S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge. |
| 49 | S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage. |
| 50 | S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge. |
| 51 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge. |
| 52 | Supply and fixingRechargeable LEDBulb 9 W ,220 V, white color all as specified and as directed. |
| 53 | S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. HAVELLS Cat art no -LHEXBLP7PN1W022 or equivalent in wipro/CG/Phillips. |
| 54 | S&F Ceiling rose surface backelite ISI marked with 3 terminalincluding connecting and testing complete all as specified and directed. |
| 55 | S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unusedway suitable for 12 way complete all as specified and directed. |
| 56 | Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. |
| 57 | Supply and fixing MCB SPN240V, 10KA "C" curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 58 | Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. |
| 59 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 60 | Supply and fix exhaust fan 250 mm sweep plastic type (make-Havells venti air DX or equivalent) all as directed and specified. |
| 61 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed. |
| 62 | M & L for GIPipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all asdirected. |
| 63 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. |
| 64 | Taking upthe existing cables from trenches of any size all as specified and directed. |
| 65 | Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 10 sqmm 2 core complete all as specified and directed. |
| 66 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cable, fixing of stay etc 10 Sqm on plan and n exc 1.5 in depth and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge. |
| 67 | Returing, filling in incl spreading, levelling watering and well ramming in layers n.exc 25cm width, Complete all as specified and directed by Engineer-in-Charge. |
| 68 | Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point Completed all as specified and diercted by Engineer-in-Charge. |
| 69 | Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed by Engineer-in-Charge. |
| 70 | M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm Complete all as specified and directed. |
| 71 | Supply and laying GI pipe medium grade 40 mmfixed on walls/ poles/laid in trenches as cable protection all as directed and specified. |
| 72 | Deduct Schedule of Credit of Rs (-) 93,273.00 (Minus) as listed in Schedule "A" Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
