|
| 1 | Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 2 | Taking down chowkats or frame but exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified andas directed. |
| 4 | Taking down shutters of any description exc 2.0 Sqm each complete all as specified andas directed. |
| 5 | M&L for taking down shutters of any description easing, adjusting, cutting and also refixing builders hardware as required including renewal of unserviceable scres etc exc 1.50 sqm but not exc 4 sqm all as specified and as directed. |
| 6 | S & Ffactory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed. |
| 7 | S&F factory made 28mm thick solid PVC flush door shutter made from co-exturded 3 layer rigid PVC foam sheet (single extruded) water proofing and termite proof and fire retardant having density 600 Kg/cum (minimum) oute layer 0.8 mm to 1 mm thick of rigid PVC with density 1400 kg/cum complete all as specified and directed. |
| 8 | S & F 30 mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawinggiven on MES schedule Part – II (2010) complete all as specified and directed. |
| 9 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 10 | S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkhats complete all as specified and directed. |
| 11 | S&F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed. |
| 12 | S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. |
| 13 | S&F 30 mm thickflush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side and covered on both side with decorative face veneer with liping/frame to match complete all as specified and directed. |
| 14 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 15 | M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed. |
| 16 | S & F 150 mm long Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed. |
| 17 | S&F 100 mm butt hinge, medium weight, cold rolled mild steelcomplete all as specified and directed. |
| 18 | S&F 150 mm Aluminium handles cast type, anodisedand fixed complete all as specified and directed. |
| 19 | S&F in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 20 | S & F Hasp & Staple safety type stove enamelled black size 100 mmincludingbolt to hinge plate and fixed with screwed all as specified or as directed. |
| 21 | S&F 300 mm long mild steel sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 22 | S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 40 mm complete all as specified and directed. |
| 23 | S&F 100 mm Aluminium handles cast type, anodisedand fixed complete all as specified and directed. |
| 24 | Dismentling boarding of any description, fixed in any position with nails as in club board self and partition ceiling complete. |
| 25 | M & L 18/19 mm thick Particle board, medium density, flat pressed, three layer type with BWR typeadhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work with teak wood beading at the edges complete all as specified and as directed. |
| 26 | S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 27 | S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 28 | S & F Steel ventilator with top hung shutters includinghinges, steel peg stay, complete all as specified and directed. |
| 29 | S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed. |
| 30 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads area not exc 0.5 Sqm each complete all as specified and directed. |
| 31 | S&F 3 mm thickfrostedon one side sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m. in each panesall as specified and directed . |
| 32 | S & F Sheet glass 4.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. |
| 33 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or stainless steel wire staples complete all as specified and directed. |
| 34 | S&F in repairs 20 mm dia harrison rail, mild steel, chromium plated with & includig suitable fixing CP brackets, stops, rollers etc. complete all as specified and directed. |
| 35 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 36 | M&L for brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete built in cement mortar all as specified and directed. |
| 37 | M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 38 | M & L for 15 mm thick rendering in cement mortar 1:6 onfair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 39 | M & L for 15 mm thick rendering in cement mortar 1:6 onfair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement and taking down plaster complete all as specified and directed. |
| 40 | M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry or on one side of lathing surfaces and finished the surface even and smooth without using extra cement and including taking down plaster complete all as specified and directed. Note:- WPC shall be measured and paid separately. |
| 41 | M&L for rendering 5 mm thick rendering in CM 1:3 on ceilingfinished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L for prepration of new plastered surfaces ofwall applying two coats of oil emulsion distemper over a coat of cement primer over a thin layer of wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed. |
| 43 | M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of cement primercomplete all as specified and directed. |
| 44 | M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemperovera coat of primer to obtain smooth finish complete all as specified and directed. |
| 45 | M & L complete removal of existing treatment of old plastered or previously untreated ceilings surfaces and applying two coats oil bound distemperovera coat of cement primercomplete all as specified and directed.complete all as specified and directed. |
| 46 | M&L complete removal of existing treatment of old plastered or previously untreated walls surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 47 | M&L preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applyingone coats of synthetic enamel paint complete all as specified and directed. |
| 48 | M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 49 | M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 50 | M&L preparation ofold decorated steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying one coats of synthetic enamel paintcomplete all as specified and directed. |
| 51 | S&F 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. |
| 52 | S&F 20 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc.) and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. |
| 53 | Taking down 15 mm bore steel tubing pipe and connections, complete all as specified and directed. |
| 54 | Taking down 20 mm bore steel tubing pipe and connections, complete all as specified and directed. |
| 55 | Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting n.exc. 10 cm in girth complete all as specified and directed. |
| 56 | S&F in repairs rotational moulded polyethylene water storage tanks of 2000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. |
| 57 | S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. |
| 58 | S&F in repairs ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight210 gms) complete all as specified and directed. |
| 59 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 60 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over andincluding screed bed 15 mm thick in CM 1:6 acomplete all as specified and directed. |
| 61 | All as per Sl item No. 60 above but in skirting etc. laid over andincluding screed bed 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 62 | M&L coloured glazed ceramic tiles 350x250x7 / 450 x 350 x 7 mm thickas in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 including roughening of surface complete all as specified and directed. |
| 63 | M&L 10 mm thick premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tilesn. exc.0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:6 finish even and rough complete all as specified and directed. |
| 64 | All as per Sl item No. 63.00 above but in skirting etc. laid over andincluding screed bed 10 mm thick in CM 1:4 complete all as specified and directed. |
| 65 | Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed. |
| 66 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT(total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screwscomplete all as specified and directed. |
| 67 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT(total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screwscomplete all as specified and directed. |
| 68 | S&F in replacement 4 mm thick pre-painted E-fibre board Designer/Decorativefixed or laid/ inserted to with and including Anodised aluminium snap grid frame size 605x605 mm work for false ceiling Hangers with 6 mm dia. G.I. (length as required) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including necessary dimantling of existing unserviceable ceiling boards of any thickness including cover fillets complete all as specified and directed. |
| 69 | S&F in replacement 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling of grid size 605 x 605 mm including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedand complete all as specified anddirected. |
| 70 | S&F in repairs vitreous china squatting pan, \"Orissa pattern\"white, size 580 x 440 mm with integral foot rest,\"P\" or \"S\" trap and including connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. |
| 71 | S&F in repairs vitreous china european water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closedpattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed. |
| 72 | S&F vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, including dismantling the existing basin complete all as specified and directed. |
| 73 | S&F in repair PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 74 | Demolition of cement concrete (unreinforced) inground floorsand pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 75 | M&L cement concrete chequered tiles 300x 300 x 25 mm thick as in floors, set and jointed over and including 15 mm thickscreed bed in CM 1:4 and pointed in grey cement and pigments to match the colour of tile including dismantling complete all as specified and directed. |
| 76 | M&L 60 mm thick machine pressed precast concrete interlockingcoloured paver block of any shape and size confirming to IS 15658-2006, M-35 grade, set with grey cement and pigment, laid over and including 20 mm thick screed bed in CM 1:6 and including demolition complete all as specified and directed. |
| 77 | M&L 50 mm thick, PCC 1:2:4, type B-1(using 20 mm graded crushed stone aggregate) as infloor, sub base, etc. finished even and smooth without using extra cement complete all as specified and directed. |
| 78 | M&L 75 mm thick, PCC 1:3:6, type C-2(using 40 mm graded crushed stone aggregate) as infloors, sub base, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement complete all as specified and directed. |
| 79 | S & F in repairs 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 80 | S&F pillar tap 15 mm bore,fancy type, cast copper alloy, with capstan head, chromium plated, screweddown high pressure, with or without lettered “hot\" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 81 | S&FPVC connections 15 mm size with PTMT nuts, of length 450 mm & suitable for hot water supply complete all as specified and directed. |
| 82 | S&F in repairs angle stop cock / angle cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type,concealed type, chromium plated long thread with flange including CP nipple and socket complete all as specified and directed. |
| 83 | S&F in repairs health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook and connection with angular stop cock complete all as specified and directed. |
| 84 | M&L for roof treatment in order of precedence as given below complete all as specified and as directed:-(i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm.(ii) 15 mm thick screed bed in CM 1:4 on surface.(iii) Cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 Ltr / Sqm.(Contd...) |
| 85 | (iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing.(v) Applying one coat of water proofing paint with aluminium finish over APP as per manufacturer\"s instruction.Note :- (a) Bituminous primer shall be \"ShaliTex Primer\" manufactured by M/s STP Ltd or equivalent in M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited(b) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) A minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction.(d) APP based polymeric membrane shall be manufactured by M/s STP Ltd or Berger Paints or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited(e) Water proofing paint shall be by M/s STP Ltd or Berger Paints or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited |
| 86 | Taking down unserviceable rolling shutter 125qm complete all as specified and directed. |
| 87 | S&F steel rolling shutters without ball bearing, with thickness of laths 1.00 mm push and pull or mannual type including top cover, anchoring rod, hasp and staple with one shop coat of red oxide or zinc chrome primer and fixed in position in existing opening complete all as specified & directed. |
| 88 | S&F in repairs Ball bearing of suitable sizes complete for rollong shutter complete all as specified and directed. |
| 89 | S&F in repairs Safety lever locks mild steel with 4 levers including locking plate for rolling shutter complete all as directed. |
| 90 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 91 | S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed. |
| 92 | M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheet and brick wall, thickness of concrete bed exc. 5 cm and not exc. 10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork height upto 7m complete all as specified and directed. |
| 93 | M&Lpowder coated Aluminium anodised door, window, Cup board and ventilator shutter and frame any type (Sliding or openable ) with frameand other similar work, fabricated aluminium mesh etc. aluminium heavy section favricated incl all necessary roller wheels, cleats, handle, locking arrangement and arrangement to fix wire mesh with aluminium channel beading and stainless steel screw incl cost of rubber gasket ,beading roller wheel etc. ,complete all as specified and directed.Note: (a) The weight of rubber gasket beading, roller wheels, etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measure.(b) Wire mesh shall be measured and paid separately.(c) Aluminium hinges shall be included in the unit rate |
| 94 | S&F 4.8mm thickglass including tinted/dark film exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed. |
| 95 | Supply and fixin repairs mortise locks suitable for aluminium door of 100 mm size 4 lever brass body vertical type as per existing or sample complete all as specified and directed. |
| 96 | S&F in repairsDoor closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body complete all as specified and directed by Engr-in-Charge. |
| 97 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of 1000 to 2000 ltrs capacity PVC water storage tank without dismantling the tank incl writting the item \"Tank Cleaning on ____\" indication the date, month & year of cleaning on external wall of tanks walls with synthetic enamel paint all as specified and directed by Engr -in-charge. |
| 98 | S&F factory made u PVC white colour three track three panels sliding window with fly proof S.S wire mesh (two nos. Glazed & one no. Wire mesh panels) upto 1.50m height made of (big series) frame 116x45mm & sash 46 x 62mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazed bead of appropriate dimension. comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 0.2mmthick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (any colour powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finshed wall and necessary stainless steel screws etc. profile to frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rodof required size and of approved quality, complete all as specified and directed. by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 99 | M&L Anti termite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 100 | M&L Anti termite Treatment of soil under existing floor using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
