Tender For Face-Lifting By Way Of Painting And Other Civil Works In Engineering Block At Skims
Tender Value
8.26 Lakhs
Estimated cost
Bid Submission
03 Oct 2023
0 days left
EMD
16520
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
soura → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Face-Lifting By Way Of Painting And Other Civil Works In Engineering Block At Skims
BOQ
| Sl. No. | Item Description |
| 1 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm. |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix |
| 4 | Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 5 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriage. |
| 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 8 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand |
| 9 | Providing wood work in frames of doors and windows and other frames , wrought framed and fixed in position.( 2nd class kail wood) |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick |
| 11 | Providing and laying600x600mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 14 | Providing and fixing of PVCpipe (Type “B”) in proper gradient. |
| 15 | 100mm Dia |
| 16 | 75mm Dia |
| 17 | 100mm Dia Plain Bend |
| 18 | 100mm Dia Plain Bend |
| 19 | 100mm Dia Plain Tee |
| 20 | 100mm Dia Door Bend |
| 21 | Reducer 100mm to 75mm |
| 22 | 75mm Dia Plain Bend |
| 23 | 75mm Dia Floor Trap |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc |
| 25 | 25mm nominal outer dia pipes. |
| 26 | 32mm nominal outer dia pipes. |
| 27 | Providing and fixing of CP Angle Valve of approved make (Jaquar, Cera, Resp) including all accessories complete. |
| 28 | Providing and fixing of Long Body Bib Cock of approved make (Jaquar, Cera, Resp) including all accessories complete. |
| 29 | Providing and fixing of Health Fuacet with chain of approved make (Jaquar, Cera, Resp) including all accessories complete. |
| 30 | Providing and fixing of CP Connection 600mm-450mm long of approved make including all accessories complete. |
| 31 | Providing and fixing of CP Grating of approved make (Jaquar, Cera, Resp) including all accessories complete. |
| 32 | Providing and fixing of CP Nipples 50mm long of approved makeincluding all accessories complete. |
| 33 | Providing and fixing of CP Cups of approved make (Jaquar, Cera, Resp) including all accessories complete. |
| 34 | Providing and fixing of the 300mm Exhaust Fan (Crompton Make) as per approved specifications, complete. |
| 35 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 36 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 37 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 39 | Add GST Applying factor 0.2127 multiplying factor 1.2127 and dividing factor 1.2127 to basic amount of the items |
AI Tender Summary
Tender Timeline
Sep 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender