Tender For Construction Of Kgbv Type-Ii At Mechuka, Shi Yomi, District Arunachal Pradesh Under Isse
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Oct 2023
0 days left
EMD
6.59 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shi Yomi → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Kgbv Type-Ii At Mechuka, Shi Yomi, District Arunachal Pradesh Under Isse
BOQ
| Sl. No. | Item Description |
| 1 | 1.SH:- Academic Building and Hostel Building Portion:- |
| 2 | SH:- Development of Site: Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by mechanical means including cutting and trimming of sideslopes and disposing of excavated earth with all lifts and lead upto 1000 metres) |
| 3 | Excavation in Hilly Area in Ordinary Rock by Mechanical Means not Requiring Blasting. (Excavation in hilly area in ordinary rock not requiring ballasting by mechanical means including cutting and trimming of slopes and disposal of cut material with all lift and lead upto 1000 metres ) |
| 4 | SH:- School Building: Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, whenrequired, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m. |
| 5 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 6 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 7 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering |
| 8 | Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5mm nominal size). |
| 9 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 10 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 11 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 12 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 13 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 14 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20( 1 cement: 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 15 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
| 16 | b)Column, pillars, posts and struts etc. |
| 17 | c) Lintels, beams, girders, bressumers and cantilevers etc. |
| 18 | d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 19 | e) Stairs (excluding landings) except spiral stair cases. |
| 20 | Reinforcement of RCC work including bending, binding and placing in position complete. b)Tar/ TMT steel |
| 21 | Brick workwith best available local brick in superstructure 1:4 ( 1 cement : 4 fine sand). |
| 22 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 23 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure. |
| 24 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 25 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 26 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws. a) 38mm thick best available local wood class - B I |
| 27 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal |
| 28 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill. |
| 29 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete a) 300 x 16 mm |
| 30 | Providing and fixing Al tower bolts (barrel type) with necessary screws etc complete. a) 250 x 10 mm |
| 31 | (b) 150 x 10 mm |
| 32 | Providing and fixing MS handles with necessary screws etc complete. (a) 100 mm |
| 33 | (b) 75 mm |
| 34 | Providing and fixing MS Hooks and Eyes. (a) 200 mm |
| 35 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 36 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. 1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade SC 15) |
| 37 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. (a) 75 mm thick |
| 38 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor. a) 18 mm thick |
| 39 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 40 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 41 | 15mm thick cement plaster 1 : 3 ( 1 cement : 3 fine sand ) |
| 42 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. |
| 43 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 44 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 45 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 46 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on stellwork complete. |
| 47 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 48 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvan a) Orissa Type |
| 49 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. (a) 100 mm dia |
| 50 | Providing and fixing sand cast iron heel rest sanitary bend. (a) 100 mm dia |
| 51 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominalsize) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight ofcover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 52 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). a) 15 mm nominal bore |
| 53 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). (a) 20 mm niminal bore |
| 54 | Providing and fixing brass bib cock of approved quality. a)15 mm nominal bore |
| 55 | Providing and fixing brass stop cock of approved quality. (a) 15 mm nominal bore |
| 56 | Providing and fixingPolythene water tabk( Sintex etc Brand) |
| 57 | Providing and fixing SS railing 0.75 m high with 50mm dia steel pipetop and bottom rails5 cm x 5 cm intermediate vertical bars placed at 22.5 cm centre to centre including painting two or more coats as directed. |
| 58 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand :6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 59 | Lime concrete terracing on roofs, average thickness 10 cm laid to fall with 25 mm gauge brick ballast and 50% mortar consisting of 1 lime putty and 2 surki finished with gur and belgiri treatment complete and covered with flat brick tiles grouted with cement mortar 1 : 3 (1 cement : 3 fine sand) over 12 mm layer cement mortar 1 : 3 (1 cement : 3 fine sand) and finished neat. |
| 60 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm |
| 61 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design/200 mm dia SW pipes |
| 62 | Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete/200 mm dia SW pipes |
| 63 | Add carrying Charges (as per Annexure-A) |
| 64 | ELECTRIFICAL WORKS POINT WIRING Point wiring in PVC conduit, with modular type switch. Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit,with modular switch, modular switch, suitable size G.I. box and earthing the point with 1.5 sq. mm.FR PVC insulated copper conductor single core cable etc. as required. Group A |
| 65 | Group B |
| 66 | Group C |
| 67 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulatedcopper conductor single core cable in surface/ recessed mediumclass PVC conduit along with 1 No 4 sq. mm FR PVC insulatedcopper conductor single core cable for loop earthing as required. |
| 68 | Wiring for circuit/ submain wiring along with earth wire with thefollowing sizes of FR PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (5A Plug). |
| 69 | 2 x 4 sq. mm + 1 x 4 sq. mm earth wire(for power point). |
| 70 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 71 | 25 mm |
| 72 | 32 mm |
| 73 | 50 mm |
| 74 | TV Cable in existing Conduit :- Supplying and drawing co-axial TV Cable RG - 6 grade,0.7 mm solid copper conductor PEinsulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.S/F modular type switch/socket :- Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 Amps Switch |
| 75 | 15/16 Amps Switch |
| 76 | 5/6 Amps Socket |
| 77 | 15/16 Amps socket outlet |
| 78 | Telephone socket outlet |
| 79 | Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required |
| 80 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existingjunction box/ wooden block including connection etc as required |
| 81 | Supplying and fixing brass batten/ angle holder includingconnection etc. as required. |
| 82 | Erection of wall bracket /ceiling fittings of all sizes and shapescontaining upto two GLS lamps per fitting, complete with allaccessories including connection etc. as required. |
| 83 | Supplying and fixing call bell/ buzzer suitable for single phase,230 volts, complete as required |
| 84 | Installation, testing and commissioning of pre-wired, fluorescentfitting/ compact fluorescent fitting of all types, with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc as required. |
| 85 | Installation, testing and commissioning of ceiling fan, includingwiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable,including providing and fixing phenolic laminated sheet cover onthe fan box etc. as required.5/6 amps switch |
| 86 | CHAPTER 2 – MCCB, MCB & DB’S Providing and fixing following capacity TP&N disconnector fuseswitch unit inside the existing panel board with ISI marked HRCfuses including drilling holes in cubicle panel, makingconnections, etc. as required. 32 Amp TP&N |
| 87 | 63 Amp TP&N |
| 88 | Providing and fixing following rating and breaking capacity MCCBin existing cubicle panel board including drilling holes in cubiclepanel, making connections, etc. as required. 100 Amp |
| 89 | 125 Amp |
| 90 | Providing and fixing following rating and breaking capacity MCCBin existing cubicle panel board including drilling holes in cubiclepanel, making connections, etc. as required. 4 way (4 + 12), Double door |
| 91 | 6 way (4 + 18), Double door |
| 92 | EARTHING Copper Plate Electrode :- Earthing with Copper plate 600 x 600 x 3 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc.(but withoutcharcoal or coke and salt) complete as required. |
| 93 | Providing and laying earth connection from earth electrode with4.00 mm dia copper wire in 15 mm dia G.I. pipe from earthelectrode including connection with copper thimble excavationand re-filling as required |
| 94 | Providing and fixing 25 mm X 5 mm copper strip on surface or inrecess for connections etc. as required. |
| 95 | Fittings: Supplying of 1200mm AC sweep ceiling Fan( Orient/Usha make) |
| 96 | Modular fan regulator ( anchor/Roma step make) |
| 97 | 20 Wats LED Bulbs ( bajaj/ Phylips make) |
| 98 | 15 Wats LED Bulbs ( bajaj/ Phylips make) |
| 99 | Fluorescent Tube set fitting/ ( bajaj/ Phylips make) |
| 100 | FurnitureProviding & supplying offurnishing itemsas per the standard specification and direction of Engineer-in-charge. WoodenBench 3.3\"x1.3\"x2\" size |
| 101 | WoodenDesk-3.3\"x1.3\"x2.6\" size |
| 102 | Wooden writing Table 3\"x2\"x2.6\" size |
| 103 | Woodenarmedchair |
| 104 | Water filter (20 Ltr) |
| 105 | Dustbin |
| 106 | SH:- Hostel Building Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, whenrequired, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m. |
| 107 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 108 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 109 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering |
| 110 | Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5mm nominal size). |
| 111 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 112 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 113 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 114 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 115 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 116 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with M20( 1 cement: 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 117 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
| 118 | b)Column, pillars, posts and struts etc. |
| 119 | c) Lintels, beams, girders, bressumers and cantilevers etc. |
| 120 | d) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 121 | e) Stairs (excluding landings) except spiral stair cases. |
| 122 | Reinforcement of RCC work including bending, binding and placing in position complete. b)Tar/ TMT steel |
| 123 | Brick workwith best available local brick in superstructure 1:4 ( 1 cement : 4 fine sand). |
| 124 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 125 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure. |
| 126 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 127 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 128 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.a) 38mm thick best available local wood class - B I |
| 129 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal |
| 130 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill. |
| 131 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete a) 300 x 16 mm |
| 132 | Providing and fixing Al tower bolts (barrel type) with necessary screws etc complete. a) 250 x 10 mm |
| 133 | (b) 150 x 10 mm |
| 134 | Providing and fixing MS handles with necessary screws etc complete. (a) 100 mm |
| 135 | (b) 75 mm |
| 136 | Providing and fixing MS Hooks and Eyes. (a) 200 mm |
| 137 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
| 138 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. 1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade SC 15) |
| 139 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. (a) 75 mm thick |
| 140 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor. a) 18 mm thick |
| 141 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 142 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 143 | 15mm thick cement plaster 1 : 3 ( 1 cement : 3 fine sand ) |
| 144 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. |
| 145 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 146 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 147 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 148 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on stellwork complete. |
| 149 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 150 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvan a) Orissa Type |
| 151 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. (a) 100 mm dia |
| 152 | Providing and fixing sand cast iron heel rest sanitary bend.(a) 100 mm dia |
| 153 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominalsize) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight ofcover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 154 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). a) 15 mm nominal bore |
| 155 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). (a) 20 mm niminal bore |
| 156 | Providing and fixing brass bib cock of approved quality. a)15 mm nominal bore |
| 157 | Providing and fixing brass stop cock of approved quality. (a) 15 mm nominal bore |
| 158 | Providing and fixingPolythene water tabk( Sintex etc Brand) |
| 159 | Providing and fixing SS railing 0.75 m high with 50mm dia steel pipetop and bottom rails5 cm x 5 cm intermediate vertical bars placed at 22.5 cm centre to centre including painting two or more coats as directed. |
| 160 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand :6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 161 | Lime concrete terracing on roofs, average thickness 10 cm laid to fall with 25 mm gauge brick ballast and 50% mortar consisting of 1 lime putty and 2 surki finished with gur and belgiri treatment complete and covered with flat brick tiles grouted with cement mortar 1 : 3 (1 cement : 3 fine sand) over 12 mm layer cement mortar 1 : 3 (1 cement : 3 fine sand) and finished neat. |
| 162 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm |
| 163 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design/200 mm dia SW pipes |
| 164 | Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete/200 mm dia SW pipes |
| 165 | Add carrying Charges (as per Annexure-A) |
| 166 | ELECTRIFICAL WORKS POINT WIRING Point wiring in PVC conduit, with modular type switch. Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit,with modular switch, modular switch, suitable size G.I. box and earthing the point with 1.5 sq. mm.FR PVC insulated copper conductor single core cable etc. as required. Group A |
| 167 | Group B |
| 168 | Group C |
| 169 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulatedcopper conductor single core cable in surface/ recessed mediumclass PVC conduit along with 1 No 4 sq. mm FR PVC insulatedcopper conductor single core cable for loop earthing as required. |
| 170 | Wiring for circuit/ submain wiring along with earth wire with thefollowing sizes of FR PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire (5A Plug). |
| 171 | 2 x 4 sq. mm + 1 x 4 sq. mm earth wire(for power point). |
| 172 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 173 | 25 mm |
| 174 | 32 mm |
| 175 | 50 mm |
| 176 | TV Cable in existing Conduit :- Supplying and drawing co-axial TV Cable RG - 6 grade,0.7 mm solid copper conductor PEinsulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required.S/F modular type switch/socket :-Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 Amps Switch |
| 177 | 15/16 Amps Switch |
| 178 | 5/6 Amps Socket |
| 179 | 15/16 Amps socket outlet |
| 180 | Telephone socket outlet |
| 181 | Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required |
| 182 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existingjunction box/ wooden block including connection etc as required |
| 183 | Supplying and fixing brass batten/ angle holder includingconnection etc. as required. |
| 184 | Erection of wall bracket /ceiling fittings of all sizes and shapescontaining upto two GLS lamps per fitting, complete with allaccessories including connection etc. as required. |
| 185 | Supplying and fixing call bell/ buzzer suitable for single phase,230 volts, complete as required |
| 186 | Installation, testing and commissioning of pre-wired, fluorescentfitting/ compact fluorescent fitting of all types, with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X 1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc as required. |
| 187 | Installation, testing and commissioning of ceiling fan, includingwiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable,including providing and fixing phenolic laminated sheet cover onthe fan box etc. as required.5/6 amps switch |
| 188 | CHAPTER 2 – MCCB, MCB & DB’S Providing and fixing following capacity TP&N disconnector fuseswitch unit inside the existing panel board with ISI marked HRCfuses including drilling holes in cubicle panel, makingconnections, etc. as required. 32 Amp TP&N |
| 189 | 63 Amp TP&N |
| 190 | Providing and fixing following rating and breaking capacity MCCBin existing cubicle panel board including drilling holes in cubiclepanel, making connections, etc. as required. 100 Amp |
| 191 | 125 Amp |
| 192 | Providing and fixing following rating and breaking capacity MCCBin existing cubicle panel board including drilling holes in cubiclepanel, making connections, etc. as required. 4 way (4 + 12), Double door |
| 193 | 6 way (4 + 18), Double door |
| 194 | EARTHING Copper Plate Electrode :- Earthing with Copper plate 600 x 600 x 3 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc.(but withoutcharcoal or coke and salt) complete as required. |
| 195 | Providing and laying earth connection from earth electrode with4.00 mm dia copper wire in 15 mm dia G.I. pipe from earthelectrode including connection with copper thimble excavationand re-filling as required |
| 196 | Providing and fixing 25 mm X 5 mm copper strip on surface or inrecess for connections etc. as required. |
| 197 | Fittings Supplying of 1200mm AC sweep ceiling Fan( Orient/Usha make) |
| 198 | Modular fan regulator ( anchor/Roma step make) |
| 199 | 20 Wats LED Bulbs ( bajaj/ Phylips make) |
| 200 | 15 Wats LED Bulbs ( bajaj/ Phylips make) |
| 201 | Fluorescent Tube set fitting/ ( bajaj/ Phylips make) |
| 202 | Providing & supplying offurnishing itemsas per the standard specification and direction of Engineer-in-charge.WoodenCoat 6\"x3\" sizex2\" |
| 203 | Dining table 6\" x4\"x 2.5\" size |
| 204 | Dining Chair |
| 205 | Wooden table 8\"x5x3\" size |
| 206 | Wooden stool 1,x1x,3\" |
| 207 | Steel Book shelf -44x1.5\"x6\" size |
| 208 | Wooden writing Table 3\"x2\"x2.6\" size |
| 209 | Woodenarmedchair |
| 210 | SH:- septic tank Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning to |
| 211 | Providing and laying cement concrete 1 : 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : Foundations and plinth |
| 212 | Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :1:2:4 |
| 213 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand). |
| 214 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth an |
| 215 | Reinforcement of RCC work including bending, binding and placing in position complete. b) Cold twisted bars. |
| 216 | Centring and shuttering including strutting, propping etc and removal of form work for : a)walls |
| 217 | b)S/floor |
| 218 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 219 | Neat cement punning. |
| 220 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.100mm Dia pipe |
| 221 | Providing and fixing sand cast iron heel rest sanitary bend.100mm |
| 222 | Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.150 mm dia SW pipes b) 150 mm dia SW pipes |
| 223 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.b) 150 mm dia SW pipes |
| 224 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.. |
| 225 | Add Carriage of Materials of materials ( as perAnnexure-A) |
| 226 | SH:- Boundary wall Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m. |
| 227 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 228 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin : M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 229 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 230 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. |
| 231 | Centring and shuttering including strutting, propping etc and removal of form work for : b) Column, pillars, posts and struts etc. |
| 232 | c) Lintels, beams, girders, bressumers and cantilevers etc. |
| 233 | Reinforcement of RCC work including bending, binding and placing in position complete. b) Cold twisted bars. |
| 234 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand). |
| 235 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand). |
| 236 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 237 | Providing and fixing MS angle Iron post 50 x50x6mm size in cementconcrete colomn 1:2:4 with two way of 35 cm on top and 45 cm under coloumn and 30 cm open with 8mm dia holes at c/c 125 mm forfixing od barbed wire with GI stapples including1/4 ofof red oxide primer as per direction of enginner in charge |
| 238 | 12 mm thick cement plaster (1:4 1: cement ,4: fine sand) |
| 239 | 15 mm thick cement plaster (1:4 1: cement ,4: fine sand) |
| 240 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 241 | Providing and fixing GI barbed wire with GIstapplesin MS angle iron fencing cost |
| 242 | Providing and fixing MS gate with locking and wheel system includingpriming coat and painting i/c all fittings |
| 243 | Add carrying Charge |
| 244 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
AI Tender Summary
Tender Timeline
Sep 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender