Educational and Research Institute Boards / Undertakings / PSU Closing in 0 days TDR #39868224

Tender For Establishment Of Bsl-3 Laboratory On Turnkey Basis.

Issued by Boards / Undertakings / PSU · Jaipur, Rajasthan
Tender Value
2.50 Crore
Estimated cost
Bid Submission
27 Oct 2023
0 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Establishment Of Bsl-3 Laboratory On Turnkey Basis. , Double Decker Double Skin Air Handling Unit: Bottom Unit: Double Skin Type With Thermal Break Profile Puf Insulated Air Handling Unit ( Ahu ) Made Out Of 0.6 Mm Gi Pre-Painted Outside And 0.6 Mm Gi Plain Sheet Inside Of Ahu Consisting Of Weather Louver, 10Micron+5Micron Combination Filter Section Followed By Hrw, 8 / 10 Rd Coil And Hot Water Coil, Supply Air Fan Section With Fan And Motor, Upper Unit: Hrw, Fan And Motor. Aluminum Volume Control Dampers For Supply, Return, Exhaust Air Damper, Marine Lamp For Fan Section With Limit Switch With Access Doors For Fan, Coil, Filter Sections; Coil Section With Ss 304 Drain Pan Duly Insulated. , Supply Fan: 4500-6000 Cfm@160 Mm Sp ( As Per Designer Calculations ) With 2 Supply Fans And Motors As Per Specifications , Air Handling Unit: Double Skin Type With Thermal Break Profile Puf Insulated Air Handling Unit ( Ahu ) Made Out Of0.6 Mm Gi Pre-Painted Outside And 0.6 Mm Gi Plain Sheet Inside Of Ahu Consisting Of Mixing Chamber, 10Micron+5Micron Combination Filter Section Followed By 6Rd Coil And Heaters, Supply Air Fan Section With Fan And Motor, Hepa ( H-13 ) Filter; Aluminium Volume Control Dampers For Supply, Return, Bleed And Fresh Air Damper, Marine Lamp For Fan Section With Limit Switch With Access Doors For Fan, Coil, Filter Sections; Coil Section With Ss 304 Drain Pan Duly Insulated. , Ahu-02 : 2800-3500 Cfm @ 110 Mm Wc Static Pressure, 5.0 Tr As Per Designer Calculations , Ventilation Unit And Exhaust Unit For Waste Water Inactivation Area With Hepa Filtered Air Exhaust With A Bag In Bag Out System Of Below Specifications To Maintain 12-45Acph And Negative Differential Air Pressure Of -70Pa ( Room Dimension To Obtain From Client, Approx.: 12 Feet X 15 Feet ) , Air Cooled Chiller With Desuperheater, Chw Outlet / Inlet At +5 / 12Degc, Hot Water At 45Degc, Makeup Water / Expansion Tank, Pumps With Suitable Pump Head, Ms Piping With Complete Insulation, Control Valves, Manifold For Chw, Hw With Y Strainer, Butterfly Valves, Balancing Valves, Temperature, Pressure Gauges, Auto Airvent, Drain Valves, Pumps On Vfd. Chiller Capacity: 40-50 Tr With Multiple Compressors As Per Designer Calculations. Ari Certified , Exhaust Fan System , Capacity: 5700-7000 Cfm With 2 Fans And 2 Motors With Suitable Static Pressure To Achieve Required Negative Pressure In The Bsl3 Area As Per Designer Calculations , Bag In Bag Out System-Ss 304 Heavy Gauge 1.2Mm To 2Mm Thickness Of Various Parts, Gasket Systems, Bag Arrangements, Locking System, Leak Testing At 1000Pascals , Capacity: 5700-7000Cfm With H13 Filters, Inspection Door For Each Filter, Locking And Compression Arrangement For Each Filter, Sight Glass, Vhp Port, Gas Tight Isolation Dampers At Inlet, Outlet Etc. , Ducting- Gi Unwelded Duct With Ms Angle Support Isma 40, Isma 25-3Mm Thk, Is 655, 277 Standards, Smacna Testing , 24 Swg , 22 Swg , Welded Duct Tig Welding-Crca Powder Coated Inside And Outside, +1000Pa Pressure Hold Tested When Assembled With 5Mm Thickx40mm Duct Flanges, ( 5Mm Plate Welded, Not Isma ) , 5Mm Neoprene Gaskets , 3 Mm Thick Angle Frame, Isma 25, Isma 40 For Unwelded Ducts , Insulation: Insulation Material With Nitrile Foam / Cross Linked Polyethylene Material Outer And Adhesive Will Be Used , 19 Mm Thick For Supply Duct , 13 Mm Thick For Return Duct , 6Mm Thick For Joints , Insulation For Welded Ducting , Supply & Return Air Grills , Supply Air Diffusers, Swirl Type Fixed With Welded Grille Modules-450X450mm-46Nos & 305X305-2 Nos , Volume Control Dampers Suitable For Airflow Control-Aluminum Extruded , Fire Damper , Isolation / Gas Tight Dampers With Heavy Gauge, Complete Welded, Tested No Leak At 1000Pascals , Dia-200Mm-4 Nos; Dia-300Mm-12Nos , Magnahelic Gauges-11 Nos Withrange 0-60Pa, -100Pa To 100Pa For Centralized Monitoring Wrt To Atmosphere, In Ss 304 Box Alog With Hydrophobic Filters, Pu Tubing, Labelling , Ceiling Panel: Supplies Of Modular Solid Clean, Thick Ceiling Panel Made Up Of 0.8 Mm Thick, Powder Coated Filled With Puf Quality 40 Kgm3 Density, Connecting Profiles For Reinforcement Along The Periphery All Accessories Etc 50Mm Thickness , Wall Panel: Supplies Of Modular Clean Wall Panel Made Up Of 0.8 Mm Thick Both Side Powder Coated Filled With Puf Quality 40 Kgm3 Density, With Connecting Profiles For Reinforcement Along The Periphery All Accessories Etc , 50Mm Thick&100Mm Thick Panels , View Glass Double Glazed, Bsl3 Area Shall Be Completely Airtight , Return Risers Of Suitable Thickness, Quantity As Per Designer Calculations , Wall-Wall, Wall-Ceiling Joinery System With All Fasteners, Connecting Systems, Sealants , Modular Clean Room Door Material: Ppgi, Skin Thickness 0.8Mm, Infill: Puf With Flush Double-Glazing Glass, Hardware Like Door Closure, D Handles, Ball Bearing Butt Hinges And Provision For Concealed Automatic Door Bottom Seal , Size: ( Single Door ) 1000 X 2100 Mm-Metallic Doors , Size: ( Single Door ) 900 X 2100 Mm-Metallic Doors , Gas Tight Doors With Ss 304 To Comply 1000Pascal Pressure Testing ( With No Inflatable Gasket ) From Both Side Openable Handles, Lock Tightness With Gasket, Mechanical Seal Type Doors With A Vision Panel Of 200Mm Dia, Heavy Gauge Construction , Size ( Single Door ) : 900 X 2100 Mm , Size: ( Double Door ) 1200 X 2100 Mm , Epoxy Flooring , Door Interlocking System-2 Door System With Em Lock, No Touch, Emergency Exit With 2 Doors Having Access Control System At Entry, Exit , Static Pass Box - Ss 304 ( 600 X 600 Mm ) With Uv Light, Hour Meter , Gas Tight Pass Box With Gas Tight Doors, Mechanical Seal Type, Tested No Leak At 1000Pascal-600X600x600 With Provision To Connect With Vhp Gas , Dunk Tank Ss 304-Overall 1125Mm Depth X 600Mm Width X Ht: 2100 With View Glass Gas Tight With A Chamber, Bin, Holder, Gas Tight Doors , Bio Safety Cabinet: Class Ii Type A2 Size: 4’ X 2’ X 2’ ( W X D X H ) Moc: Ss 304Nsf49 / En12469 Standards , Double Door Decontamination& Sterilization Autoclave Hphv Automatic Sliding, Ss 304, Size: 600X600x1200mm With All Decontamination& Sterilization Cycles With Bioseal Suitable For Bsl3 Special Operations With Loading Trolleys , Fire Detection & Alarm System: Fine Detection And Alarm System Will Be Provided For The Entire Bsl-3 Laboratory Facility To Detect Any Eventual Case Of Fire In The Building , Fire Extinguishers – 2 Kg Dry Powder Type- , Emergency Shower And Eye Wash In Ss 304 , Trolley Ss 304, Size 2’X1’6” , Epabx System ( Intercom Facility ) : Telephone Instrument With Speaker Facility ( 3 Telephone ) , Cctv Surveillance System With Dvr And Storage Capacity With Monitors And Cctv Cameras ( 8 Nos ) , Lan Wiring And Connectivity With Sockets To Be Provided At Strategic Locations Inbsl3 Facility , Electrical Control Panels, Control Systems With All Accessories, Wires, Cables, Safety Systems As Per Is Codes For The Purpose Of Energizing The Bsl3 Laboratory Facility All The Electrical Fittings And Fixtures In The Laboratory’S Areas Shall Be Suitable For Clean Room Application And Shall Be Sealed Including Ahus ( Vfd Controlled ) , Biosafety Cabinet, Instruments, Equipments, Lighting, Compartmentalized Type, Ups Circuits, Raw Power Circuit, Dg Power Circuits , Lights And Electrical Switch / Sockets Ip55 Sockets, Ip65 Plug Top Industrial Sockets Of Suitable Enough Numbers , Ss 304 Furniture , Ss Cross Over Bench ( S Type ) , Moc: Ss304, 16 / 18 / 19 Swg, Finish: Matt, 1100Mmx300mmx550mm , Paddle Dustbin, M.O.C.: Ss 304 Qlty* 18 Swg, Finish: Matt Finish, Dia 200X450mmht , Work Table All Side Open, M.O.C.: Ss 304 Qlty* 16 / 18 Swg Finish: Matt Finish, Size: 1200X600x750mm Ht , Garment Storage Cabinet: A Garment Storage Cabinet That Can Be Locked Shall Be Provided In The Change Rooms For Each Lab Worker. The Garment Storage Cabinets Shall Be In Ss304 ( Two Way ) , Ss304 Grade Shoe Racks , Ss 304 Stools, M.O.C.: Ss 304 Qlty* 18 Swg Finish: Matt Finish Height Adjustable Arrangement , Ss Square Sink With 03 Side Splash Back M.O.C.: Ss 304 Qlty* 16 / 18 Swg Finish: Matt Finish, Size: 450X450x850+150Mmht Sink- 350*350*250Mmht , Wet Shower With Complete Tig Welding, Shower System, Storage Of Items, Hot Water System, Fixed With Gas Tight Doors-2 Nos, Drainable Floor Grating, Complete Enclosure; Dimension: 1200X1200mmx2100mm Ht, Leak Testing For 1000Pascal, Led Light, Hanger, Integration With The Modular Panels. , Elbow Operated Tap& Ss 304 Sink Unit , Effluent Decontamination System ( Eds ) Along With Effluent Collection Tank:Decontamination Process Tank: 250Ltrs X 2 And All Required Parts Etc With Automatic Level Indicators, Inbuilt Electrical Heating, Control Systems, Pumping With Standbys , Coat Hangers , Hand Dryer , All Liquid Drain Coming Out From The Bsl3 Laboratory Will Be Connected To A Common Drain Line With Back Flow Prevention, Ss 304 Schedule 40 Pipe , Commissioning, Documentation-Dq, Iq, Oq, Pq, Containment Leak Test At 250Pa, Welded Duct, Wet Shower, Gas Tight Doors, Dp Cascade, Directional Airflow , 3Rd Party Certification Of Commissioned Bsl3 Facility In Line With Dbt-Rcgm Guidelines, Iso 17025 Valid For 3 Yrs ( Need To Perform After 3Years One More Time ) , Operation And Maintenance Of Bsl3 Lab-Comprehensive-5 Years Including 1St Year Warranty, 1 Operator Is To Be Provided For Operation And Maintenance.

BOQ

Name of Work:Establishment of BSL-3 Laboratory on Turnkey Basis.
Sl. No. Item Description
1Double decker double skin Air handling Unit: Bottom Unit: Double Skin type with Thermal Break Profile PUF insulated Air handling Unit (AHU) made out of 0.6 mm GI pre-painted outside and 0.6 mm GI plain sheet inside of AHU consisting of Weather louver, 10micron+5micron combination filter section followed by HRW, 8/10 Rd coil and hot water coil, Supply air Fan section with Fan and motor, Upper Unit: HRW, Fan and Motor. Aluminum volume control dampers for Supply, return, Exhaust air damper, marine lamp for fan section with limit switch with access doors for fan, coil, filter sections; coil section with SS 304 drain pan duly insulated.
2Supply fan: 4500-6000 CFM@160 mm SP (as per designer calculations) with 2 supply fans and motors as per specifications
3Air handling Unit: Double Skin type with Thermal Break Profile PUF insulated Air handling Unit (AHU) made out of0.6 mm GI pre-painted outside and 0.6 mm GI plain sheet inside of AHU consisting of mixing chamber, 10micron+5micron combination filter section followed by 6Rd coil and Heaters, Supply air Fan section with Fan and motor, HEPA (H-13) filter; Aluminium volume control dampers for Supply, return, Bleed and Fresh air damper, marine lamp for fan section with limit switch with access doors for fan, coil, filter sections; coil section with SS 304 drain pan duly insulated.
4AHU-02 : 2800-3500 cfm @ 110 mm WC Static Pressure, 5.0 TR as per designer calculations
5Ventilation unit and Exhaust unit for waste water Inactivation area with HEPA filtered air exhaust with a Bag in Bag out system of below specifications to maintain 12-45ACPH and negative differential air pressure of -70Pa (room dimension to obtain from client, approx.: 12 feet x 15 feet)
6Air Cooled Chiller with Desuperheater, CHW outlet/inlet at +5/12degC, Hot water at 45degC, Makeup water/Expansion tank, Pumps with suitable pump head, MS Piping with complete insulation, control valves, manifold for CHW, HW with Y strainer, butterfly valves, balancing valves, temperature, pressure gauges, auto airvent, drain valves, Pumps on VFD. Chiller capacity: 40-50 TR with multiple compressors as per designer calculations. ARI certified
7Exhaust Fan system
8Capacity: 5700-7000 CFM with 2 fans and 2 motors with suitable static pressure to achieve required negative pressure in the BSL3 area as per designer calculations
9Bag in Bag out system-SS 304 Heavy gauge 1.2mm to 2mm thickness of various parts, gasket systems, bag arrangements, locking system, leak testing at 1000Pascals
10Capacity: 5700-7000CFM with H13 filters, inspection door for each filter, locking and compression arrangement for each filter, sight glass, VHP port, gas tight isolation dampers at inlet, outlet etc.
11Ducting- GI UNWELDED Duct with MS angle support ISMA 40, ISMA 25-3mm thk, IS 655, 277 standards, SMACNA testing
1224 SWG
1322 SWG
14Welded Duct TIG welding-CRCA powder coated inside and outside, +1000Pa pressure hold tested when assembled with 5mm thickx40mm duct flanges, (5mm plate welded, not ISMA), 5mm neoprene gaskets
153 mm thick Angle frame, ISMA 25, ISMA 40 for unwelded ducts
16Insulation: Insulation material with Nitrile foam/cross linked Polyethylene material outer and adhesive will be used
1719 mm thick for supply duct
1813 mm thick for Return duct
196mm Thick for joints
20Insulation for Welded ducting
21Supply & Return air grills
22Supply air diffusers, swirl type fixed with welded grille modules-450x450mm-46nos & 305x305-2 nos
23Volume control Dampers suitable for airflow control-Aluminum extruded
24Fire Damper
25Isolation/Gas tight dampers with heavy gauge, complete welded, tested no leak at 1000Pascals
26Dia-200mm-4 nos; Dia-300mm-12nos
27Magnahelic Gauges-11 nos withrange 0-60Pa, -100Pa to 100Pa for centralized monitoring wrt to atmosphere, in SS 304 box alog with hydrophobic filters, PU tubing, labelling
28CEILING PANEL: Supplies of modular solid clean, thick ceiling panel made up of 0.8 mm thick, powder coated Filled with PUF quality 40 kgm3 density, connecting profiles for reinforcement along the periphery all accessories etc 50mm thickness
29WALL PANEL: Supplies of modular clean wall panel made up of 0.8 mm thick both side Powder coated Filled with PUF quality 40 kgm3 density, with connecting profiles for reinforcement along the periphery all accessories etc
3050mm thick&100mm thick panels
31View Glass double glazed, BSL3 area shall be completely airtight
32Return risers of suitable thickness, quantity as per designer calculations
33Wall-wall, wall-ceiling joinery system with all fasteners, connecting systems, sealants
34Modular Clean Room Door Material: PPGI, Skin Thickness 0.8mm, Infill: PUF with flush double-glazing glass, hardware like door closure, D handles, ball bearing butt hinges and provision for concealed automatic door bottom seal
35Size: (Single Door) 1000 x 2100 mm-Metallic doors
36Size: (Single Door) 900 x 2100 mm-Metallic doors
37GAS Tight doors with SS 304 to comply 1000Pascal pressure testing (with no inflatable gasket) from both side openable handles, lock tightness with gasket, mechanical seal type doors with a vision panel of 200mm dia, heavy gauge construction
38Size (Single Door): 900 x 2100 mm
39Size: (Double Door) 1200 x 2100 mm
40Epoxy Flooring
41Door Interlocking System-2 door system with EM lock, no touch, emergency exit with 2 doors having access control system at entry, exit
42Static Pass Box - SS 304 (600 x 600 mm) with UV light, hour meter
43Gas tight Pass box with gas tight doors, mechanical seal type, tested no leak at 1000Pascal-600x600x600 with provision to connect with VHP gas
44Dunk Tank SS 304-overall 1125mm depth x 600mm width x ht: 2100 with view glass gas tight with a chamber, bin, holder, gas tight doors
45Bio Safety Cabinet: Class II Type A2 Size: 4’ x 2’ x 2’ (W x D x H) MOC: SS 304NSF49/EN12469 standards
46Double door Decontamination& Sterilization Autoclave HPHV Automatic sliding, SS 304, Size: 600x600x1200mm with all decontamination& sterilization cycles with bioseal suitable for BSL3 special operations with loading trolleys
47Fire Detection & Alarm System: Fine Detection and Alarm System will be provided for the entire BSL-3 Laboratory Facility to detect any eventual case of fire in the building
48Fire Extinguishers – 2 Kg dry powder type-
49Emergency shower and Eye Wash in SS 304
50Trolley SS 304, size 2’x1’6”
51EPABX System (Intercom facility): Telephone instrument with speaker facility (3 Telephone)
52CCTV Surveillance System with DVR and storage capacity with monitors and CCTV cameras (8 Nos)
53LAN wiring and connectivity with sockets to be provided at strategic locations inBSL3 facility
54Electrical Control panels, control systems with all accessories, wires, cables, safety systems as per IS codes for the purpose of energizing the BSL3 Laboratory facility All the electrical fittings and fixtures in the laboratory’s areas shall be suitable for clean room application and shall be sealed including AHUs (VFD controlled), Biosafety Cabinet, Instruments, Equipment\"s, Lighting, compartmentalized type, UPS circuits, raw power circuit, DG power circuits
55Lights and Electrical Switch/ Sockets IP55 sockets, IP65 plug top industrial sockets of suitable enough numbers
56SS 304 Furniture
57SS Cross Over Bench (S type), MOC: SS304,16/18/19 swg, Finish: Matt, 1100mmX300mmX550mm
58Paddle Dustbin, M.O.C.: SS 304 qlty* 18 swg, Finish: Matt Finish, Dia 200x450mmht
59Work Table All Side Open, M.O.C.: SS 304 qlty* 16/18 swg Finish: Matt Finish,Size: 1200x600x750mm ht
60Garment Storage Cabinet: A garment storage cabinet that can be locked shall be provided in the Change rooms for each lab worker. The garment storage cabinets shall be in SS304 (Two way)
61SS304 Grade Shoe racks
62SS 304 Stools, M.O.C.: SS 304 qlty* 18 swg Finish: Matt Finish height adjustable arrangement
63SS Square Sink With 03 side splash back M.O.C.: SS 304 qlty* 16/18 swg Finish: Matt Finish, Size: 450x450x850+150mmht Sink- 350*350*250mmht
64Wet Shower with complete TIG welding, shower system, storage of items, hot water system, fixed with Gas tight doors-2 nos, drainable floor grating,complete enclosure; Dimension: 1200x1200mmx2100mm ht, leak testing for 1000Pascal, LED light, hanger, integration with the modular panels.
65Elbow operated tap& SS 304 Sink unit
66Effluent Decontamination System (EDS) along with Effluent Collection Tank:Decontamination Process Tank: 250Ltrs x 2 and all required parts etc with automatic level indicators, inbuilt electrical heating, control systems, pumping with standbys
67Coat Hangers
68HAND DRYER
69All liquid drain coming out from the BSL3 laboratory will be connected to a common drain line with back flow prevention, SS 304 schedule 40 pipe
70Commissioning, Documentation-DQ, IQ, OQ, PQ, Containment Leak test at 250Pa, Welded duct, Wet shower, gas tight doors, DP cascade, directional airflow
713rd Party Certification of Commissioned BSL3 Facility in line with DBT-RCGM guidelines, ISO 17025 valid for 3 yrs (need to perform after 3years one more time)
72Operation and Maintenance of BSL3 Lab-Comprehensive-5 Years including 1st year warranty, 1 operator is to be provided for operation and maintenance.

AI Tender Summary

OUR REF NO 39868224
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 2.50 Crore
LAST DATE 27-10-2023
Authority
Authority Name Rajasthan University Of Veterinary And Animal Sciences
Work Description Establishment Of Bsl-3 Laboratory On Turnkey Basis. , Double Decker Double Skin Air Handling Unit: Bottom Unit: Double Skin Type With Thermal Break Profile Puf Insulated Air Handling Unit ( Ahu ) Made Out Of 0.6 Mm Gi Pre-Painted Outside And 0.6 Mm Gi Plain Sheet Inside Of Ahu Consisting Of Weather Louver, 10Micron+5Micron Combination Filter Section Followed By Hrw, 8 / 10 Rd Coil And Hot Water Coil, Supply Air Fan Section With Fan And Motor, Upper Unit: Hrw, Fan And Motor. Aluminum Volume Control Dampers For Supply, Return, Exhaust Air Damper, Marine Lamp For Fan Section With Limit Switch With Access Doors For Fan, Coil, Filter Sections; Coil Section With Ss 304 Drain Pan Duly Insulated. , Supply Fan: 4500-6000 Cfm@160 Mm Sp ( As Per Designer Calculations ) With 2 Supply Fans And Motors As Per Specifications , Air Handling Unit: Double Skin Type With Thermal Break Profile Puf Insulated Air Handling Unit ( Ahu ) Made Out Of0.6 Mm Gi Pre-Painted Outside And 0.6 Mm Gi Plain Sheet Inside Of Ahu Consisting Of Mixing Chamber, 10Micron+5Micron Combination Filter Section Followed By 6Rd Coil And Heaters, Supply Air Fan Section With Fan And Motor, Hepa ( H-13 ) Filter; Aluminium Volume Control Dampers For Supply, Return, Bleed And Fresh Air Damper, Marine Lamp For Fan Section With Limit Switch With Access Doors For Fan, Coil, Filter Sections; Coil Section With Ss 304 Drain Pan Duly Insulated. , Ahu-02 : 2800-3500 Cfm @ 110 Mm Wc Static Pressure, 5.0 Tr As Per Designer Calculations , Ventilation Unit And Exhaust Unit For Waste Water Inactivation Area With Hepa Filtered Air Exhaust With A Bag In Bag Out System Of Below Specifications To Maintain 12-45Acph And Negative Differential Air Pressure Of -70Pa ( Room Dimension To Obtain From Client, Approx.: 12 Feet X 15 Feet ) , Air Cooled Chiller With Desuperheater, Chw Outlet / Inlet At +5 / 12Degc, Hot Water At 45Degc, Makeup Water / Expansion Tank, Pumps With Suitable Pump Head, Ms Piping With Complete Insulation, Control Valves, Manifold For Chw, Hw With Y Strainer, Butterfly Valves, Balancing Valves, Temperature, Pressure Gauges, Auto Airvent, Drain Valves, Pumps On Vfd. Chiller Capacity: 40-50 Tr With Multiple Compressors As Per Designer Calculations. Ari Certified , Exhaust Fan System , Capacity: 5700-7000 Cfm With 2 Fans And 2 Motors With Suitable Static Pressure To Achieve Required Negative Pressure In The Bsl3 Area As Per Designer Calculations , Bag In Bag Out System-Ss 304 Heavy Gauge 1.2Mm To 2Mm Thickness Of Various Parts, Gasket Systems, Bag Arrangements, Locking System, Leak Testing At 1000Pascals , Capacity: 5700-7000Cfm With H13 Filters, Inspection Door For Each Filter, Locking And Compression Arrangement For Each Filter, Sight Glass, Vhp Port, Gas Tight Isolation Dampers At Inlet, Outlet Etc. , Ducting- Gi Unwelded Duct With Ms Angle Support Isma 40, Isma 25-3Mm Thk, Is 655, 277 Standards, Smacna Testing , 24 Swg , 22 Swg , Welded Duct Tig Welding-Crca Powder Coated Inside And Outside, +1000Pa Pressure Hold Tested When Assembled With 5Mm Thickx40mm Duct Flanges, ( 5Mm Plate Welded, Not Isma ) , 5Mm Neoprene Gaskets , 3 Mm Thick Angle Frame, Isma 25, Isma 40 For Unwelded Ducts , Insulation: Insulation Material With Nitrile Foam / Cross Linked Polyethylene Material Outer And Adhesive Will Be Used , 19 Mm Thick For Supply Duct , 13 Mm Thick For Return Duct , 6Mm Thick For Joints , Insulation For Welded Ducting , Supply & Return Air Grills , Supply Air Diffusers, Swirl Type Fixed With Welded Grille Modules-450X450mm-46Nos & 305X305-2 Nos , Volume Control Dampers Suitable For Airflow Control-Aluminum Extruded , Fire Damper , Isolation / Gas Tight Dampers With Heavy Gauge, Complete Welded, Tested No Leak At 1000Pascals , Dia-200Mm-4 Nos; Dia-300Mm-12Nos , Magnahelic Gauges-11 Nos Withrange 0-60Pa, -100Pa To 100Pa For Centralized Monitoring Wrt To Atmosphere, In Ss 304 Box Alog With Hydrophobic Filters, Pu Tubing, Labelling , Ceiling Panel: Supplies Of Modular Solid Clean, Thick Ceiling Panel Made Up Of 0.8 Mm Thick, Powder Coated Filled With Puf Quality 40 Kgm3 Density, Connecting Profiles For Reinforcement Along The Periphery All Accessories Etc 50Mm Thickness , Wall Panel: Supplies Of Modular Clean Wall Panel Made Up Of 0.8 Mm Thick Both Side Powder Coated Filled With Puf Quality 40 Kgm3 Density, With Connecting Profiles For Reinforcement Along The Periphery All Accessories Etc , 50Mm Thick&100Mm Thick Panels , View Glass Double Glazed, Bsl3 Area Shall Be Completely Airtight , Return Risers Of Suitable Thickness, Quantity As Per Designer Calculations , Wall-Wall, Wall-Ceiling Joinery System With All Fasteners, Connecting Systems, Sealants , Modular Clean Room Door Material: Ppgi, Skin Thickness 0.8Mm, Infill: Puf With Flush Double-Glazing Glass, Hardware Like Door Closure, D Handles, Ball Bearing Butt Hinges And Provision For Concealed Automatic Door Bottom Seal , Size: ( Single Door ) 1000 X 2100 Mm-Metallic Doors , Size: ( Single Door ) 900 X 2100 Mm-Metallic Doors , Gas Tight Doors With Ss 304 To Comply 1000Pascal Pressure Testing ( With No Inflatable Gasket ) From Both Side Openable Handles, Lock Tightness With Gasket, Mechanical Seal Type Doors With A Vision Panel Of 200Mm Dia, Heavy Gauge Construction , Size ( Single Door ) : 900 X 2100 Mm , Size: ( Double Door ) 1200 X 2100 Mm , Epoxy Flooring , Door Interlocking System-2 Door System With Em Lock, No Touch, Emergency Exit With 2 Doors Having Access Control System At Entry, Exit , Static Pass Box - Ss 304 ( 600 X 600 Mm ) With Uv Light, Hour Meter , Gas Tight Pass Box With Gas Tight Doors, Mechanical Seal Type, Tested No Leak At 1000Pascal-600X600x600 With Provision To Connect With Vhp Gas , Dunk Tank Ss 304-Overall 1125Mm Depth X 600Mm Width X Ht: 2100 With View Glass Gas Tight With A Chamber, Bin, Holder, Gas Tight Doors , Bio Safety Cabinet: Class Ii Type A2 Size: 4’ X 2’ X 2’ ( W X D X H ) Moc: Ss 304Nsf49 / En12469 Standards , Double Door Decontamination& Sterilization Autoclave Hphv Automatic Sliding, Ss 304, Size: 600X600x1200mm With All Decontamination& Sterilization Cycles With Bioseal Suitable For Bsl3 Special Operations With Loading Trolleys , Fire Detection & Alarm System: Fine Detection And Alarm System Will Be Provided For The Entire Bsl-3 Laboratory Facility To Detect Any Eventual Case Of Fire In The Building , Fire Extinguishers – 2 Kg Dry Powder Type- , Emergency Shower And Eye Wash In Ss 304 , Trolley Ss 304, Size 2’X1’6” , Epabx System ( Intercom Facility ) : Telephone Instrument With Speaker Facility ( 3 Telephone ) , Cctv Surveillance System With Dvr And Storage Capacity With Monitors And Cctv Cameras ( 8 Nos ) , Lan Wiring And Connectivity With Sockets To Be Provided At Strategic Locations Inbsl3 Facility , Electrical Control Panels, Control Systems With All Accessories, Wires, Cables, Safety Systems As Per Is Codes For The Purpose Of Energizing The Bsl3 Laboratory Facility All The Electrical Fittings And Fixtures In The Laboratory’S Areas Shall Be Suitable For Clean Room Application And Shall Be Sealed Including Ahus ( Vfd Controlled ) , Biosafety Cabinet, Instruments, Equipments, Lighting, Compartmentalized Type, Ups Circuits, Raw Power Circuit, Dg Power Circuits , Lights And Electrical Switch / Sockets Ip55 Sockets, Ip65 Plug Top Industrial Sockets Of Suitable Enough Numbers , Ss 304 Furniture , Ss Cross Over Bench ( S Type ) , Moc: Ss304, 16 / 18 / 19 Swg, Finish: Matt, 1100Mmx300mmx550mm , Paddle Dustbin, M.O.C.: Ss 304 Qlty* 18 Swg, Finish: Matt Finish, Dia 200X450mmht , Work Table All Side Open, M.O.C.: Ss 304 Qlty* 16 / 18 Swg Finish: Matt Finish, Size: 1200X600x750mm Ht , Garment Storage Cabinet: A Garment Storage Cabinet That Can Be Locked Shall Be Provided In The Change Rooms For Each Lab Worker. The Garment Storage Cabinets Shall Be In Ss304 ( Two Way ) , Ss304 Grade Shoe Racks , Ss 304 Stools, M.O.C.: Ss 304 Qlty* 18 Swg Finish: Matt Finish Height Adjustable Arrangement , Ss Square Sink With 03 Side Splash Back M.O.C.: Ss 304 Qlty* 16 / 18 Swg Finish: Matt Finish, Size: 450X450x850+150Mmht Sink- 350*350*250Mmht , Wet Shower With Complete Tig Welding, Shower System, Storage Of Items, Hot Water System, Fixed With Gas Tight Doors-2 Nos, Drainable Floor Grating, Complete Enclosure; Dimension: 1200X1200mmx2100mm Ht, Leak Testing For 1000Pascal, Led Light, Hanger, Integration With The Modular Panels. , Elbow Operated Tap& Ss 304 Sink Unit , Effluent Decontamination System ( Eds ) Along With Effluent Collection Tank:Decontamination Process Tank: 250Ltrs X 2 And All Required Parts Etc With Automatic Level Indicators, Inbuilt Electrical Heating, Control Systems, Pumping With Standbys , Coat Hangers , Hand Dryer , All Liquid Drain Coming Out From The Bsl3 Laboratory Will Be Connected To A Common Drain Line With Back Flow Prevention, Ss 304 Schedule 40 Pipe , Commissioning, Documentation-Dq, Iq, Oq, Pq, Containment Leak Test At 250Pa, Welded Duct, Wet Shower, Gas Tight Doors, Dp Cascade, Directional Airflow , 3Rd Party Certification Of Commissioned Bsl3 Facility In Line With Dbt-Rcgm Guidelines, Iso 17025 Valid For 3 Yrs ( Need To Perform After 3Years One More Time ) , Operation And Maintenance Of Bsl3 Lab-Comprehensive-5 Years Including 1St Year Warranty, 1 Operator Is To Be Provided For Operation And Maintenance.
Basic Detail
Tender No F/()PGIVER/CDSRZ/2023-24/180
Bidding Type Tender
Location
City Jaipur
State Rajasthan
Key Dates
Publish Date 26 Sep 2023
Submission Date 27 Oct 2023
Open Date 30 Oct 2023
Finance
Tender Value 2.50 Crore
Tender Fee 2000
EMD 5 Lakhs
Exemption Not Available
Document List
d8882209-d496-44fd-80b4-37a424b948d2.html
BOQ_661733.xls
BSL3.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 26, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 27, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 30, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

d8882209-d496-44fd-80b4-37a424b948d2.html

xls

BOQ_661733.xls

pdf

BSL3.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders