Military Engineer Services-MES has published Tender For Special Repairs And Additional /Alternator O Bldg No T-57 In Zone O At Mil Stn Agartala. Submission Date for this Tender is 24-10-2023. Mobile Generator Tenders in agartala Tripura. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Oct-2023 | CORRIGENDUM NO.1 | Other | 17-10-2023 |
| 2 | 17-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-10-2023 |
| Sl. No. | Item Description |
| 1 | Schedule"A" Part-I: B&R works |
| 2 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 3 | S&F ofcoloured Non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floor or skirting etc set and jointed in neat cement slurry over 15mm thick screed bed for laying floor finishes in CM (1:6) complete all as specified and as directed |
| 4 | S&F of Powder coated (minimum 50 micron thick)aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 4.0mm thick plain/tinted glass with stainless steel mosquito proof gauge 0.36 mm nominal dia of wire and average width of aperture 1.40 mm making good disturbed surface of wall complete all as specified and as directed. (Note: Window opening size to be measured.) |
| 5 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 6 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate |
| 7 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in |
| 8 | M&L for Hardcore of Broken bricks gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified |
| 9 | M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified |
| 10 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor and joints are filled with white & grey cement in equal proportion laid over 15mm thik screed bed in CM 1:6 complete all as specified |
| 11 | M&L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc.of Cross section exc 25 Sqcm and n exc 50 Sqcm complete all as specified |
| 12 | M&L RCC type B1 (1:1.5:3) Nominal Mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 13 | M&L forrough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as surface complete all as specified. |
| 14 | M&L TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified. |
| 15 | Cutting holes into or through brick walls built in cement mortar or cement lime mortar & stone walls built in lime mortar and making good in CM(1:3) or PCC(1:2:4) type B-1 as required Superficial area not exc 150 Sq CM complete all as specified . |
| 16 | S&F of Powder coated aluminium shutters for doors ( minimum thickness of powder coating 50 micron) with aluminium frame including helical door closer providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded builtup standard tubular sections/ appropriate Z sections and others sections of approved make confirming to IS :733 and IS: 1285, fixing with dash bottom and sides with required dia and size, including necessary filling up the gaps at juction, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherevere required including cleat angle, Aluminium snap beading for glazing/ panneling, CP brass/ Stainless steel screws all complete as per architectural drawings and direction of Engr-in-charge. |
| 17 | S&F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified |
| 18 | S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 19 | M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed. |
| 20 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 21 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 22 | S&F of 150 mm longanodised barrel tower bolt of extruded section and as directed. |
| 23 | Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.etc. |
| 24 | M & L 10mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:6 to be finished as spcified by engr-in-charge. |
| 25 | M&L for external rendering 15 mm thick in CM 1:4 mixed with WPC@0.20Ltr/ bag by weight of cement on brick work or concrete surfaces of wall finished even and smooth complete all as specified . Note-WPC shall be measured and paid seperately. |
| 26 | Supply only Liquid water proofing compound |
| 27 | M& L for 2mm thick Wall care putty on wall Surface incl preparation of new surface compete all as specified and as directed |
| 28 | M & L two coat ofOil bound distemper over a coat of pimer complete all as specified and as directed |
| 29 | M&L for preparation of old painted surface applying one coats of oil bound distemper white or tinted on old wall surface complete all as specified |
| 30 | M& L for two coat of cement base paint on new plastered surface over a coat of primer including preparation of surface complete all as specified and as directed |
| 31 | M & Lfor one coat of cement base paint on old painted surface including preparation of surface complete all as speified. |
| 32 | M & L foFinishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) incl preparation of old surface complete all as speified. |
| 33 | M & Lfor one coat of white washon old ceiling surface including preparation of surface complete all as speified. |
| 34 | M&L mild steel work such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165 complete all as specified and as directed. |
| 35 | Applying one coat of synthetic enamel paint on wooden surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint including preparation of old painted surface. |
| 36 | Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface. |
| 37 | Demolition of cement concrete(un Reinforced) of any description in any position not otherwise specifically provided for etc. complete all as specified and directed. |
| 38 | M & L 75mm thick PCC 1:3:6 type B-2 ( 40mm graded aggregate) thick as in Path & plinth protection& finishing the surface even & fair whtiout using extra cement complete all as specified and directed. |
| 39 | Schedule"A" Part-I: E&M works |
| 40 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside for schedule of credit to contactor including making good of the disturbed surfaces, all as specified and directed. |
| 41 | Material and labour for point wiring (surface type) with PVC insulated, 1100 volts FRLS grade, unsheathed, single core, multistranded copper conductors 1.5 sq mm (nominal area) for phase, neutral and continuous earth wire drawn through and including PVC Casing -N- capping (medium duty) double lock type of 20mm size with fittings & accessories, pressed steel sunken terminal box(Consealed in wall) made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with0.8 mm thick bakelite sheetfor fixing switches, regulator etc and earth continuity conductor shall be connected to common earth and earth dolly for one light / fan point controlled by one 1 way switch complete all as specified & directed. Note : Cost of cutting of wall, if any, for housing of pressed steel sunken terminal box and also making good the disturbed surfaces are deemed to be included in the unit rate. |
| 42 | All as per item No 39 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches. |
| 43 | All as per item No 39 above but for one 3/5 pin 6 Amps socket outlet on the independent board. |
| 44 | Material and labour for point wiring (surface type) with PVC insulated, 1100 volts FRLS grade, unsheathed, single core, multistranded copper conductors 2.5 sqmm (nominal area) for phase & neutral and 1.5 Sqmm (nominal area) continuous earth wire drawn through and including PVC Casing -N- capping double lock type of 20mm size with fittings & accessories, pressed steel sunken terminal box (Consealed in wall) made out of 1.6mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3mm thick bakelite sheetfor fixing switches, sockets, regulator etc and earth continuity conductor shall be connected to common earth and earth dolly for 3/5 pin 16 Amps socket outlet complete all as specified & directed. |
| 45 | Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,5 and 15 Amps, flush type ISI marked complete all as specified and as directed. |
| 46 | Materials & labour for switch piano flush button 5/6 Amps single pole, 1 way 240 V ISI marked complete all as specified and as directed. |
| 47 | Material and labour for switch socket combination 5 Pin, 6 Amps flush type ISI markedcomplete all as specified and as directed |
| 48 | Materials and labour for socket out let 5 Pin, 6 Amps flush typecomplete all as specified and as directed. |
| 49 | Materials and labour for ceiling rose surface bakelite,PVC/poly 65 x 50mm, three terminals complete all as specified and as directed. |
| 50 | Materials and labour for electronic fan regulator (step rotary type), AC 240 voltcomplete all as specified and as directed. |
| 51 | Supply & fixing MCB DB (Double door) SPN (concealed in wall) , 12 way sheet steel with bus bar, din rail, neutral link and earth bar with fitting & fixtures including taking down old one all as specified and directed. |
| 52 | Supply andfix MCB single pole 6 to 32 amps, 240 volts, 10 KA, "B" series with all incoming / outgoing connections with proper size of lugs complete inculdingtaking down the old unserviceable one all as specified as directed. |
| 53 | Supply andfix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections with proper size of lugs complete inculdingtaking down the old unserviceable one all as specified as directed |
| 54 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed. |
| 55 | Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100mm C/C both way and two Nos lifting handle made of 12mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete all as specified in electrical plate No 3 of SSR Part-I including taking down old earthing. |
| 56 | Material and labour for sub main wiring with two single core ,1100 V grade ,PVC insulated cable with Copper conducter unsheathed cable of size 4.0 sqmm drawn through & including PVC Casing -N- capping with 4.0 sqmm PVC insulated copper wire single core for continuous earthing after taking out old unservicable submain wiring complete all as directed. Note : Two run of 4.0 sqmm &one run of 4.0 sqmm of cable shall be measured as single run. |
| 57 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Including taking down old unserceable light fittingcomplete all as specified and as directed. |
| 58 | Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, including taking down the old unserviceable fitting complete all as specified and directed |
| 59 | S & F in repair for sheet metal enclosure single pole and neutral with two pin and earth plug complete with one single pole MCB 20 Amps 240 voltincluding taking down old one all as specified as directed. |
| 60 | Taking down ceiling fans/ of any size and kept in store complete all as specified and directed. |
| 61 | Hanging/refixing ceiling fans of any sizecomplete all as specified and directed. |
| 62 | NOTES :- 1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2.Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule "A" notes for details. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
