Military Engineer Services-MES has published Tender For Spl Repair To Bathrooms Of Or Line Bldg No P-78/33 And P-78/133 Of Certain Units At Shikargarh And Provn Of Water Supply Line At Upper Camp In Army Area Jodhpur Under Ge (Army) No 2 Jodhpur. Submission Date for this Tender is 23-10-2023. Water Pipe Line Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-10-2023 |
| 2 | 17-Oct-2023 | OTHER | Other | 23-10-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc overall thicknessand removing the dust debris etc to outside MOD land from site and disposing the same complete all as specified and as directed. |
| 2 | M&L for plain cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregates as over roof for making good depression/ undulation to make the existing roof surfaces as filling in depression of roof slab/ floor padding etc complete all as specified and as directed. |
| 3 | M&L for carrying out water proofing treatment for roofs in the following stages:- (i) Rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer"s instructions over concrete surfaces finished even and smooth with out using extra cement. Note : (WPC shell be measured and paid separately under respective item of schedule). (ii)First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surafces (iii)Secondlayer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcementandhaving weight 3 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed. (iv) Finally applying two protective coats of bituminous aluminium based reflective paint to safeguard against UV, including preparing of surfaces of roof (second coat apply after 24 hrs or as per manufacturing instructions). |
| 4 | Supply only integral water proofing liquid ISI marked |
| 5 | M&L for plain cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregates as in roof kerbs rounded or chamfered on edges etc complete all as specified and as directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness belowor above ground level including floor finishes and removing debris from the site all as specified and as directed. |
| 7 | Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide. |
| 8 | M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 9 | M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM (1:4) as in backing coat of tiles complete all as specified and as directed. |
| 10 | M&L for 16-18mm thick granite (black colour) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed. |
| 11 | M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with greycement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed. |
| 12 | M&L for mirror polished machine cut Kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed. |
| 13 | M&L for plain cement concrete 1:3:6 type C-1,using 20mm graded stone aggregates as in coping to parapet walls including necessary formwork complete all as specified and as directed. |
| 14 | M&L for Jodhpur stone slabs, machine cut (dressed face) 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted (vertical or horrizontal) and set, jointed and grouted cement mortar 1:3 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade ofstone slab making with cutting of groove as required etc; complete all as specified and as directed. |
| 15 | Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including including forming & filling expensionjoints 35 mm deep x 8 mm wide filled with sealing compound grade A complete all as specified. |
| 16 | Demolition of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work,serviceable stone aside for reuse and removing unserviceable material to outside MOD land from site complete all as specified and as directed. |
| 17 | M&L for squared rubble walling jodhpur type, brought upto course,well bonded bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed. |
| 18 | All as per item ser No 17 above item but, except stone complete all as specified and as directed. |
| 19 | Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses all as specified and as directed. |
| 20 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed |
| 21 | M&L for rendering 15 mm thick in CM (1:6) over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed. |
| 22 | M&L for 15 mm thick rendering on stone masonary wall surfaces in CM (1:4)finished fair and even all as specified and as directed. |
| 23 | M&L for 10 mm thick rendering in CM (1:3) on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 24 | M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer"s instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed. |
| 25 | M&L cement concrete type E-2 (1:5:10) (40mm graded crushed stone aggregate) as in sunken portion complete all as specified and directed. |
| 26 | S&F 40mm bore steel water tubing medium grade galvanised insertedat the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specified and directed. |
| 27 | M & L precast cement concrete louvres and jallies, 40 mm thick including all moulding complete Type B0 1:2:4 (12.5mm graded aggregate) Set in cement mortar (1:4) complete all as specified and directed. |
| 28 | Dismantling cast iron work of any description and in any position complete all as specified. |
| 29 | S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc complete all as specified and directed. |
| 30 | S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc complete all as specified and directed. |
| 31 | S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc complete all as specified and directed. |
| 32 | S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc complete all as specified and directed. |
| 33 | S&F 100mm bore pipe cast iron "P" or "S" trap, complete all as specified and directed. |
| 34 | S&F 75mm bore pipe cast iron "P" or "S" trap, complete all as specified and directed. |
| 35 | S&F 100mm bore pipe cast iron cowls, complete all as specified and directed. |
| 36 | S&F 75mm bore pipe cast iron cowls, complete all as specified. |
| 37 | Fixing only in repair 75mm bore pipe cast iron or any type cowls complete all as specified and directed. |
| 38 | M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, "Y" junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc complete all as specified and directed. |
| 39 | M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified and directed. |
| 40 | M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified. |
| 41 | S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified. |
| 42 | S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc complete all as specified and directed. |
| 43 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm butnot exc 4.00 sqm each and removing from site or to store complete all as specified and directed. |
| 44 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) notexc 1.5 sqm each and removing from site or to store complete all as specified and directed. |
| 45 | M & L for Pressed steel framed made out of 1.25mm thick MS sheet, of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, including cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats bedblocks of hold fasts etc including necessary form work complete all as specified and directed. |
| 46 | S&F of factory made 35 mm thick Plain framed, panelled shutters (two panel) with 2nd class hard wood rail and stylewith lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified. |
| 47 | M&L for fabrication ofaluminium powder coated ventilators (with louvered) fabricated with anodized aluminium rectangular section in frame & with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing etc all as per sample kept in GE office & fixed in position complete all as directed.(Note : Glass pane in louvers & stainless steel wire cloth shall be measured & paid separately) |
| 48 | S&F for tinted glass of selected quality, 5mm thick , and glazing with aluminium beading & rubber gasketin aluminium frame all as specified and as directed. |
| 49 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & as directed. |
| 50 | S&F Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawings. |
| 51 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 52 | S & F 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges all as specified and directed. |
| 53 | S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws complete all as specified. |
| 54 | S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified. |
| 55 | S&F 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified. |
| 56 | Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified. |
| 57 | S&F framed work as in doors chowkats of MS angle iron/Channel/I- Section or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed, frame for water storage tanks,complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to Fe 410-W(Gde-E-250) quality complete all as specified and directed |
| 58 | M&L forpowder coated aluminum grill of design No DG-104, 7.5mm thick sections of decogrill or of equivalent approved makewith 1 mm thick "F" sections of suitable size complete all as specified and as directed. |
| 59 | Taking down of size15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed. |
| 60 | All as per ser item no 59 above but for size 20 mm bore. |
| 61 | All as per ser item no 59 above but for size 25 mm bore. |
| 62 | Supply, fixing, Jointing and testing 15 mm bore galvanised mild steel water tubing "medium grade" with and including all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. Note: Cost of cutting/leaving/forming chases, holes etc through walls, floor, plinth protection, roof etc as required and making good the surface to match as per existing shall deemed to be included in quoted rate. |
| 63 | All as per ser item no 62 above but for size 20 mm bore. |
| 64 | All as per ser item no 62 above but for size 25 mm bore. |
| 65 | All as per ser item no 62 above but for size 50 mm bore. |
| 66 | Fixing only 15mm bore steel water tubing any grade with all new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed. |
| 67 | All as per ser item no 66 above but for size 20 mm bore. |
| 68 | All as per ser item no 66 above but for size 25 mm bore. |
| 69 | S&F for vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe)complete with provision of lime concrete bedding including taking down existing unserviceable WC of any discription and in any position & fixingnew WC and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed. |
| 70 | Vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube (Make of Jet "Praayag" Cat Part No 5211 or Equivalent)incl making connection to inlet flush pipe, & to "P" or "S" draintrap, incl supply of long special "P" or "S" trapfixed in repair complete and making good the disturbed portion etc complete all as specified and directed. |
| 71 | S&F for PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified. |
| 72 | S&F forVitreous china under/over counter wash basin, white colour, oval shape, size 560x470mm including CP waste fittings PVC waste pipe of 32mm size/ bore, Pillar tap, brass, 15mm dia, with capston heads, chromium plated,fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank andfixed over granite on RCC plateform including necessery cutting accourding wash basin shape/ size etc and making good disturbed surfaces to match with the existing complete all as specified and directed.Make: CERA Cat No. S2030104. |
| 73 | S&F in repair for Vitreous china urinal, half stall type, white,completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections complete all as specified and directed. |
| 74 | Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified. |
| 75 | Disconnecting existing PVC tank exc 500 Ltrs and not exc1000 Ltrs setting aside (or lowering if required) for repairs. Cleaning, etc and hoisting if required reconnecting refixing in position complete all as specified and directed. |
| 76 | S&F for 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripal- layer in white colur hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down existing unserviceable all as specified in SSR Part-I complete all as specified and directed. |
| 77 | S&F in repair 600x450mm looking mirror 5 mm thick of selected quality mounted on 6mm thick commercial plywood and fixed to wall with plug and screws etc. all as specified. |
| 78 | S&F in repair 15mm bore chromium plated Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 79 | S&F in repair 15mm bore stop valve/ angle stop cock chromium plated,fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified and directed. |
| 80 | S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 81 | S&F in repair Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc complete all as specified and directed. |
| 82 | S&F in repair CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified and directed. |
| 83 | S&F in repair CP greating doom 100mm dia complete all as specified and directed. |
| 84 | Supply and fixing 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight for 25mm ball valves-455gms) fixed incl taking down and removal of old unserviceable float valves complete all as specified and as directed. |
| 85 | Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 86 | Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cmand applying two coats of synthetic enamel paint complete all as specified and directed. |
| 87 | Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and two coats of Distemper oil Emulsion on new plastered surfaces complete all as specified and directed. |
| 88 | Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and two coats of cement base paint on new plastered surfaces complete all as specified and directed. |
| 89 | Preparation of newplastered surfaces of walls etc. & applying three coats of limewhite wash complete all as specified and directed. |
| 90 | Preparation of newplastered surfaces of ceiling etc. & applying three coats of limewhite wash complete all as specified and directed. |
| 91 | Preparing oldplastered surfaces brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl washing , rubbing down and stopping of distempered or painted surfaces and M&L for applying onecoat of distemper oil emulsion on old plastered/ unplastered surfaces of walls complete all as specified and directed. |
| 92 | Preparing oldsurfacesincl brooming surfaces, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil or greasy spots incl washing rubbing down and stopping of distempered and painted surfaces and M&L forapplying one coat of cement base paint on old plastered/ unplastered surfaces of walls complete all as specified and directed by Engr-in-Charge. |
| 93 | Preparation of old decorated plastered/ unplastered surfaces of walls etc. & applying one coat of white wash complete all as specified and directed. |
| 94 | Preparation of old decorated plastered/ unplastered surfaces of ceilingetc. & applying one coat of white wash on ceiling complete all as specified and directed. |
| 95 | Taking down carefully aluminum/copper point wiring (light/fan/ socket/ power) complete including fittings such as switch, socket, ceiling roses light fittings etc andand making good disturbed surface of wall complete all as specified and directed. |
| 96 | M&L for point wiring One light/ Exhaust fan point controlled by one way, one switch complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers with and including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing switches / sockets etc and making good surface etc complete all as specified and directed. Note : 1. The cost of Metal flush boxes and accessories like inner/outer cover plates etc is deemed to be included in quoted rate. 2.The cost of cutting chases on wall and making good surface on wall are deemed to be included in the quoted rate |
| 97 | All as per item ser No 97 above but one socket outlet 5 Amps on same board with other switch |
| 98 | All as per item ser No 97 above but one socket outlet 5 Amps on independent board |
| 99 | All as per item No 97 here in before but with single core multistranded cable of size 2.5 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 2.5 Sq mm complete all as specified and directed. |
| 100 | Supply and fixing switch piano flush type 5 Amps single pole one way, 240 volts ISI Marked. |
| 101 | Supply and fixing socket outlet 2 in 1 multi pin 5 Amps flush type universal 240 volts ISI Marked. |
| 102 | Supply and fixing switch piano 15/16 Ampsone way, 240 volts ISI Marked. |
| 103 | Supply and fixing socket outlet2 in 1, 3 pin, 5 and 15 Amps socket outlet, 240 volts ISI Marked. |
| 104 | Supply and fixing Ceiling rose on PVC FRLS board size 65 X 50 mmthree terminal ISI marked. |
| 105 | Supply and fixing LED street light fitting 45 watt (High power SMD LED"s) 230 V AC outdoor type with high pressure die cast aluminium housing powder coated in Silver grey and toughened glass and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant incl thermal magagement in multiple optics (Luminaire efficacy of > 110 lm/W ) complete with IP 65/66 LED protection with all accessories and make necessary electric connection, GI bracket of suitable size, nuts and bolts incl black colour complete all as specified and directed. |
| 106 | Supply and fixing Lamp Holder, PVC FRLS/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 107 | Supply and fixing LED lights fitting 10 watt (natural white), 220 VAC with high quality polycarbonate and translucent serrated milky white diffuser to get glare free, smooth light distribution, extruded aluminum housing enhances safety and luminaire is pre-wired with high efficiency electronic driver and LED lamp including up with three core flexible copper conductor cable suitable sze complete with all accessories and necessary connection complete all as specified and directed. |
| 108 | Supply and fixing LED lights fitting 20 watt (natural white), 220 VAC with high quality polycarbonate and translucent serrated milky white diffuser to get glare free, smooth light distribution, extruded aluminum housing enhances safety and luminaire is pre-wired with high efficiency electronic driver and LED lamp including up with three core flexible copper conductor cable suitable sze complete with all accessories and necessary connection complete all as specified and directed. |
| 109 | Supply & fix exhaust fans steel body front guard protection for bird, Powder-coated for long life, AC single phase 230/ 240 V of size 300 mm sweep with louver, air delivery 1290 cmh including opening round hole onbrick/stone/ PCC block wall for exhaust fan mounting, plaster finishing, colour as matching with existing surface & colour and grout bolts/fastner etc. at any hight of bldgs complete all as specified and directed. |
| 110 | M&L for concealed sub main wiring with 2 run of 10 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 25 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Tworun of 10 Sq.mm. and one run of 6 Sq.mm (earth wire) cableincuding one run of conduit pipe will be measured as one length |
| 111 | S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way (Concealed flush to wall), 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed. |
| 112 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection pieces for hot cold water etc . complete all as specified and directed. |
| 113 | Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissionin complete all as specified and directed. |
| 114 | Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissionin complete all as specified and directed. |
| 115 | M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work complete all as specified and directed. |
| 116 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2.0 core complete all as specified and directed. |
| 117 | Excavating in trenches in hard/dense soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed. |
| 118 | M&L for dry clean fine river sand as in sand cushioningto underground cable including punning down ofsand layer all as specified and directed. Note :- Punnedthickness shall only be measured and paid. |
| 119 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250x150mm x40 mm complete all as specified and directed. |
| 120 | M&L for galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore complete all as specified and directed. |
| 121 | M & L for Retuerning and filling of excvated loose soil in treches complete all as specified and directed. |
| 122 | M & L Removal of surplus loose soil from excavated place and deposting at safe side distance not more than 50 meter from excavated place complete all as specified and directed. |
| 123 | Supply and Fixing of sizes 80 mm bore for cast iron sluice valve PN-1.6 incl new rubber gasket, nuts and bolts brass spindle complete all as specified and directed. |
| 124 | All as per item ser No 124 above but for100 mm bore. |
| 125 | Supply and fixing of galvanised iron pipe of size 20mm bore medium grade (ISI marked) with and including medium grade (ISI Marked) fittings laid in trenches jointed and tested complete all as specified and directed |
| 126 | All as per ser item no 126 above but for50mm bore. |
| 127 | All as per ser item no 126 above but for 80mm bore. |
| 128 | All as per ser item no 126 above but for100mm bore. |
| 129 | Supply and fixgun metal gate valve of size 20 mm dia with iron wheel head screwed both ends for iron pipeand fixed complete all as specified and directed. |
| 130 | All as per items ser No 130 above but50 mm bore. |
| 131 | Construction of valve chamber sizes 900mm x 600mm x 1000mm with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate PCC block 20 cm thick wall massonary built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate inclframe made of angles iron of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed |
| 132 | All as per item ser No 132 above but for 450mm x 450mm x 600mm. |
| 133 | Material and labour for clamp made of MS flat of size 50x6 mm with nuts & bolts forconnection from existing 50-200 mm bore CI/GI pipe line by providing 15 to 50mm bore socket complete incl welding, nuts bolts, rubber sheet etc complete all as specified and directed. |
| 134 | Material and labour for laying of pipe of size up to 100 mm bore under road crossing by trenchless technology by aguring or mechnical means in any type of soil complete all as specified and directed. |
| 135 | M & L for road cutting and repairing the same with road patch material width upto 75 cm complete all as specified and directed. Note: Road repair work shall be completed the same day of work execution in all aspect, failing which a panelty of Rs 100 per meter for per hour delay will be imposed and deducted from RAR/Final Bill. |
| 136 | Supply and fixDI specialboth ends flanged and connection with new pipe line complete all as specified and directed. Note: Cost of flange work shall deemed to be included in quoted rate by the tenderer. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
