Military Engineer Services-MES has published Tender For Certain Repair Works To Wooden Furniture Including Painting For Md Accn Of Jcos/Or, Offrs And Otm Accn Under Ge(W) Jrc. Submission Date for this Tender is 16-10-2023. Painting Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 09-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-10-2023 |
Sl. No. | Item Description |
1 | TEAPOY ( Drg No. FD-382 & FD-278) M & L for carrying out repair/replacement of following parts of Teapoyas per drawing after dismantling the old unserviceable part complete all as specified:- |
2 | Leg using Teak wood (MP Teak) . |
3 | Long rail using Teak wood (MP Teak) . |
4 | Short rail using Teak wood (MP Teak) . |
5 | Top using 18/19mm thick pre-laminatedparticle board ISI Marked Make (Action tesa/Archid/Novapan) exterior gradeand 6mm thick Teak wood edging allaround. |
6 | Stiffener using Teak wood (MP Teak) . |
7 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
8 | PEG TABLE (Drg No. FD-384 & FD277) M & L for carrying out repair/replacement of following parts of Peg Table as per drawing after dismantling the old parts complete all as specified:- |
9 | Leg using Teak wood (MP Teak) . |
10 | Long rail using Teak wood (MP Teak) . |
11 | Short rail using Teak wood (MP Teak) . |
12 | Top using 18/19mm thick pre-laminatedparticle board ISI Marked Make (Action tesa/Archid/Novapan) exterior gradeand 6mm thick Teak wood edging allaround. |
13 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
14 | TABLE BED SIDE(Drg No. FD-276) M & L for carrying out repair/replacement of following parts of Table bed side as per drawing after dismantling the old parts complete all as specified:- |
15 | Leg using Teak wood (MP Teak) . |
16 | Front using 12 mm thickply wood with one side teak finish. Make (National/Duro/Green ply). |
17 | Back using 6 mm thick ply wood commercial Make (National/Duro/Green ply). |
18 | Bottom using 12 mm thick ply wood commercial Make (National/Duro/Green ply). |
19 | Shelve using 12 mm thick ply wood commercial Make (National/Duro/Green ply). |
20 | Top using 18/19mm thick pre-laminatedparticle board ISI Marked Make (Action tesa/Archid/Novapan) exterior gradeand 6mm thick Teak wood edging allaround. |
21 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
22 | TABLE 900 x 600 x 760 mm WITH DRAWER (Drg No FD-290 M & L for carrying out repair/replacement of following parts of Table 900 x 600 x 760 mm with drawer as per drawing after dismantling the old parts complete all as specified:- |
23 | Leg using Teak wood (MP Teak) . |
24 | Long rail using Teak wood (MP Teak) . |
25 | Short rail using Teak wood (MP Teak) . |
26 | Drawer using 6 mm thick ply wood commercial Make (National/Duro/Green ply). |
27 | Top using 18/19mm thick pre-laminatedparticle board ISI Marked Make (Action tesa/Archid/Novapan) exterior gradeand 6mm thick Teak wood edging allaround. |
28 | Stiffener using Teak wood (MP Teak) . |
29 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
30 | TABLE DINING FOR 6 PERS(Drg No FD -273) M & L for carrying out repair/replacement of following parts of Tabledining for 6 persas per drawing after dismantling the old parts complete all as specified:- |
31 | Top using 18/19mm thick pre-laminatedparticle board ISI Marked Make (Action tesa/Archid/Novapan) exterior gradeand 6mm thick Teak wood edging allaround. |
32 | Leg using Teak wood (MP Teak) . |
33 | Long rail using Teak wood (MP Teak) . |
34 | Short rail using Teak wood (MP Teak) . |
35 | Long Stiffener using Teak wood (MP Teak) . |
36 | Short Stiffener using Teak wood (MP Teak) . |
37 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
38 | TABLE WRITING(Drg No FD-275) M & L for carrying out repair/replacement of following parts of Table writing as per drawing after dismantling the old parts complete all as specified:- |
39 | Top using 18/19mm thick pre-laminatedparticle board ISI Marked Make (Action tesa/Archid/Novapan) exterior gradeand 6mm thick Teak wood edging allaround. |
40 | Leg using Teak wood (MP Teak) . |
41 | Long rail using Teak wood (MP Teak) . |
42 | Drawer using 6 mm thick ply wood commercial Make (National/Duro/Green ply). |
43 | Shutter using 18/19mm pre-laminatedparticle board exterior grade,fixed with 2 Nos Hinges medium weight 75 mm all as shown in Drg. |
44 | Stiffener using Teak wood (MP Teak) . |
45 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
46 | TABLE 900mmx600mmx760mm WITHOUT DRAWER (Drg No FD -284) M & L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified:- |
47 | Top using 18/19mm thick pre-laminatedparticle board ISI Marked Make (Action tesa/Archid/Novapan) exterior gradeand 6mm thick Teak wood edging allaround. |
48 | Leg using Teak wood (MP Teak) . |
49 | Long rail using Teak wood (MP Teak) . |
50 | Side rail using Teak wood (MP Teak) . |
51 | Stiffener using Teak wood (MP Teak) . |
52 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
53 | TABLE DRESSING GENTS WITH MIRROR (Drg N0. FD -230 M & L for carrying out repair/replacement of following parts of Table Dressing Gents With Mirror as per drawing after dismantling the old parts complete all as specified:- |
54 | Top and side complete using 18/19mm thick pre-laminatedparticle board ISI Marked Make (Action tesa/Archid/Novapan) exterior gradeand 6mm thick Teak wood edging allaround. |
55 | Bottom partition using 18/19mm thick block boardISI Marked Make (Action tesa/Archid/Novapan) commercial including4mm thick teak wood beading. |
56 | Drawer using 6 mm thick ply wood commercial Make (National/Duro/Green ply). |
57 | Mirror 5mm thick of make Atul/Saint-Govin with alluminum sliding channel |
58 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
59 | CHAIR DINNING LONG BACK (Drg No FD No. 357) M & L for carrying out repair/replacement of following parts of Chair dining long backas per drawing after dismantling the old parts complete all as specified |
60 | Triangular Teak stiffener 8 Nos. of size 60x60x25 mm at corners |
61 | Back using 6 mm thick ply wood commercial Make (National/Duro/Green ply). |
62 | Stiffener using Teak wood (MP Teak) . |
63 | Supply & fixing seat and back using 50mm thick synthetic foam of 32/40 density fixed over wooden frame covered with leatherite rexine of approved quality. |
64 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
65 | HAT STAND WITH MIRROR (DrgNo .FD-233) M & L for carrying out repair/replacement of following parts of Hat Stand with mirroras per drawing after dismantling the old parts complete all as specified |
66 | Mirror 5 mm thick of Make Atul/Saint-Govin |
67 | Hat standback using teak wood frame and 6mm thick commercial ply as per drg. |
68 | Copper oxidised steel peg |
69 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
70 | STOOL DRESSING CB (Drg No FD -282) M & L for carrying out repair/replacement of following parts of Stool dressing CBas per drawing after dismantling the old parts complete all as specified |
71 | Front Leg using Teak wood (MP Teak) . |
72 | Back Leg using Teak wood (MP Teak) . |
73 | Stiffener using Teak wood (MP Teak) . |
74 | Long rail using Teak wood (MP Teak) . |
75 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
76 | BIN SOLID LINEN LARGE/SMALL (Drg No FD-244) M & L for carrying out repair/replacement of following parts of Bin solid linen large /smallas per drawing after dismantling the old parts complete all as specified |
77 | Top using 6mm thick teak face plywood ISI Marked covered with Teak wood edging alround. |
78 | Bottom using 12mm thick commercial plywood ISI Marked. |
79 | Bottom rail using Teak wood (MP Teak) . |
80 | Stiffener using Teak wood (MP Teak) . |
81 | Leg using Teak wood (MP Teak) . |
82 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
83 | ALMIRAH MEDIUM WOODEN1/2H 1/2 S COMPRISING FOLLOWING REPAIRS/REPLACEMENT (Drg No FD-108) M & L for carrying out repair/replacement of following parts of Almirah Mediumwooden 1/2H/1/2 S comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified |
84 | Shutters made ofblock board commercial 18/19mm thick ISI Marked with continous hinge Make (Durga /National/Century) as per drg. |
85 | Back using 12mm thick commercial plywood ISI Marked. |
86 | Side using 9mm thick commercial plywood ISI Marked. |
87 | Block board commercial quality 18/19mm thick as in shelves, partition, top etc as per drg. |
88 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
89 | ALMIRAH M/UWOODENCOMPRISING FOLLOWING REPAIRS/REPLACEMENT (Drg No FD -93(M)) M & L for carrying out repair/replacement of following parts of Almirah M/U wooden comprising following repairs/replacement as per drawing after dismantling the old parts complete all as specified |
90 | Shutters made ofblock board commercial 18/19mm thick ISI Marked with continous hinge Make (Durga /National/Century) as per drg. |
91 | Back using 12mm thick commercial plywood ISI Marked. |
92 | Side using 9mm thick commercial plywood ISI Marked. |
93 | Block board commercial quality 18/19mm thick as in shelves, partition, top etc as per drg. |
94 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
95 | BED PLY WOOD TOP (Drg No FD-246) M & L for carrying out repair/replacement of following parts of Bed Ply Topas per drawing after dismantling the old parts complete all as specified |
96 | Long rail using Teak wood (MP Teak) . |
97 | Head board using Teak wood (MP Teak) |
98 | Foot board using Teak wood (MP Teak) |
99 | Top using 12mm thick commercial plywood ISI Marked. |
100 | Stiffener using Teak wood (MP Teak) . |
101 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
102 | TABLE OFFICE OFFICER"s WOODEN (Drg No DB-4114) M & L for carrying out repair/replacement of following parts of Table office officers wooden as per drawing after dismantling the old parts complete all as specified |
103 | Top 5"x3" made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including4mm thick Teak wood (MP Teak) beading all around. |
104 | Leg using Teak wood (MP Teak) . |
105 | Stiffener using Teak wood (MP Teak) . |
106 | Front rail using Teak wood (MP Teak) . |
107 | Side rail using Teak wood (MP Teak) . |
108 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
109 | TABLE OFFICE CLERKWOODEN(Drg No DB-4280) M & L for carrying out repair/replacement of following parts of Table office Clerk wooden as per drawing after dismantling the old parts complete all as specified |
110 | Top 54""x36" made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan fixed with mild steel screws as per size and shape including4mm thick Teak wood (MP Teak) beading all around. |
111 | Leg using Teak wood (MP Teak) . |
112 | Stiffener using Teak wood (MP Teak) . |
113 | Front rail using Teak wood (MP Teak) . |
114 | Side rail using Teak wood (MP Teak) |
115 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
116 | SIDE BOARD (Drg No FD-241) M & L for carrying out repair/replacement of following parts of Side Boardas per drawing after dismantling the old parts complete all as specified |
117 | Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including4mm thick Teak wood (MP Teak) beading all around. |
118 | Leg using Teak wood (MP Teak) . |
119 | Back made out of 6mm thick commercial ply wood |
120 | Side rail using Teak wood (MP Teak) . |
121 | Front rail using Teak wood (MP Teak) . |
122 | Door shutters made out of 18mm thick block board with 6 mm thick Teak wood (MP Teak) edging all around of doors |
123 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
124 | TABLE DRESSING LADIES WITH MIRROR (Drg No FD -251) M & L for carrying out repair/replacementfollowing parts to table dressing ladies with mirror, complete all as specified and shown on drgs after removing the old broken part. |
125 | Mirror5.5mm thick electro copper plated of polished plate size 365x1220mm. |
126 | Frame of mirror made out of Teak wood (MP Teak) of size 25 x 19mm. |
127 | Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/NovapanISI marked fixed with mild steel screws as per size and shape including4mm thick Teak wood (MP Teak) beading all around. |
128 | Drawers of table. |
129 | Sliding glass of table. |
130 | Channel made out of aluminum for fixture for sliding glass . |
131 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
132 | TABLE CENTRE/TABLE CENTRE TWO TIER (Drg No FD-274) M & L for carrying out repair/replacementfollowing parts to table centre, complete all as specified and shown on drgs after removing the old broken part. |
133 | Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/NovapanISI marked fixed with mild steel screws as per size and shape including4mm thick Teak wood (MP Teak) beading all around. |
134 | Leg using Teak wood (MP Teak) . |
135 | Long rail using Teak wood (MP Teak) . |
136 | Short rail using Teak wood (MP Teak) . |
137 | Stiffeners of 2 tier tableusing Teak wood (MP Teak) . |
138 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
139 | TABLE DINING FOR 8 PERSONS (Drg No FD-273) M & L for carrying out repair/replacementfollowing parts to table dining for 8 persons, complete all as specified and shown on drgs after removing the old broken part. |
140 | Top 1800x900mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Action tesa/Archid/NovapanISI marked fixed with mild steel screws as per size and shape including4mm thick Teak wood (MP Teak) beading all around. |
141 | Leg using Teak wood (MP Teak) . |
142 | Long rail using Teak wood (MP Teak) . |
143 | Short rail using Teak wood (MP Teak) . |
144 | Long Stiffeners using Teak wood (MP Teak) . |
145 | Short Stiffeners using Teak wood (MP Teak) . |
146 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
147 | TRESTLE STORE ROOM WOODEN (Drg No FD-66(M)) M & L for carrying out repair/replacement following parts to trestle store room wooden, complete all as specified and shown on drgs after removing the old broken part. |
148 | Legs of size 100 x 100mm at top and 75x75mm at bottom 400mm high made of second class hard wood (SAL). |
149 | Long rail of sizes 100x100x2440mmmade of second class hard wood (SAL). |
150 | Central rails /Stiffeners of size 65x100x1220mmmade of second class hard wood (SAL). |
151 | Applying two coats of synthetic enamel paint (black) after necessary preparation of surfaces . |
152 | SOFA SET THREE SEATER/SINGLE SEATERWITH DETACHABLE CUSHION (Drg No FD-281 & FD -373 M & L for carrying out repair/replacement of following parts of Sofa set three seater /single seater with detachable cushionas per drawing after dismantling the old parts complete all as specified |
153 | S & F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood (teak) duly plained and smoothed with sand paper. |
154 | All asper 23.01but Side rail of size 575mm x 100mm x 35mm. |
155 | All as per Srl Item no. 23.01 above but long rail of back of size 1590mm x 70mm x 35mm. |
156 | do but Side rail of size 575mm x 100mm x 35mm. |
157 | All as per Srl Item no. 23.01 above but long rail of back of size 1590mm x 70mm x 35mm. |
158 | Allas per item No 23.01 above but long rail of back of single seater sofa of size 575mmx70mmx35mm. |
159 | S & F in replacement of arms for Single / Three seater sofa of size 35mm x 70mm (cross section) of 1st class hard wood (MP Teak) complete all as specified and shown on drgs after removing the old broken arms. |
160 | All as per item No above but here-in-before but batten of size 50mm x 20mm. |
161 | M & L for applying two coat of french polish after preparation of surface complete to sofa 3 seater |
162 | M & L for applying two coat of french polish after preparation of surface complete to sofa single chair. |
163 | S & F sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM. |
164 | Chair writing/CBA (Drg No FD -280 & FD 250) M & L for carrying out repair/replacement following parts toChair writing/CBA complete all as specified and shown on drgs after removing the old broken part. |
165 | Front Leg using Teak wood (MP Teak) . |
166 | Rear Leg using Teak wood (MP Teak) . |
167 | Front rail using Teak wood (MP Teak) . |
168 | Side rail using Teak wood (MP Teak) . |
169 | Back rail using Teak wood (MP Teak) . |
170 | Arms using Teak wood (MP Teak) . |
171 | Stiffener using Teak wood (MP Teak) . |
172 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
173 | Chair Dinning (Drg No FD-279) S & F in replacement following parts toChair Dinning/CBB complete all as specified and shown on drgs after removing the old broken part. |
174 | Front Leg using Teak wood (MP Teak) . |
175 | Rear Leg using Teak wood (MP Teak) . |
176 | Front rail using Teak wood (MP Teak) . |
177 | Side rail using Teak wood (MP Teak) . |
178 | Back rail using Teak wood (MP Teak) . |
179 | Stiffener using Teak wood (MP Teak) . |
180 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces . |
181 | Chair Easy (Drg No FD-229) M & L for carrying out repair/replacement of following parts of Chair Easy as per drawing after dismantling the old parts complete all as specified |
182 | Front Leg using Teak wood (MP Teak) . |
183 | Rear Leg using Teak wood (MP Teak) . |
184 | Front rail using Teak wood (MP Teak) |
185 | Side rail using Teak wood (MP Teak) |
186 | Back rail using Teak wood (MP Teak) |
187 | Arms using Teak wood (MP Teak) |
188 | Stiffener using Teak wood (MP Teak) |
189 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces |
190 | Chair Wooden Bottom without arms (Drg No FD -225 & FD 285) S & F of following parts of Chair wooden bottom without arms after removing the old broken parts. |
191 | Front Leg using Teak wood (MP Teak) |
192 | Rear Leg using Teak wood (MP Teak) |
193 | Rail using Teak wood (MP Teak) |
194 | Stiffener using Teak wood (MP Teak) |
195 | Seat of plywood commercial 6mm thick IS marked Make : Kitply, Duroply and National |
196 | Applying two coats of French polish (ready made) to article after necessary preparation of surfaces |
197 | M&L for removing old broken cane and recanning with plastic cane (oval shape) 2mm wide and border with 3mm wide cane complete as per Godrej pattern using Make : SHAH/PREMIER brand cane to the following furniture articles:- |
198 | STOOL DRESSING CB (Drg No FD -282) |
199 | Bin soiled linen (Drg No FD-244) |
200 | Chair writing (Drg No FD -280 & FD 1107) |
201 | Chair dining (Drg No FD-279) |
202 | Chair easy (Drg Nos FD-229 & FD 1108) |
203 | S&F glass top of size 1.5 feet x 3 feet x 12 mm of black shade. Edges of glass should be duly rounded / polished / grinded |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail