Military Engineer Services-MES has published Tender For Additional / Alternator To Building No T-4 At Asri Dehradun.. Submission Date for this Tender is 16-10-2023. Mobile Generator Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed. |
| 2 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | M& L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6 ) complete all as specified anddirected. |
| 4 | All as per item No. 03 above, but except brick. |
| 5 | M&L brick work with sub class "B"brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wallincluding demolition of existing brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 6 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 7 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed. |
| 8 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and directed. |
| 9 | M&L for preparation of old decorated surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 10 | M&L for preparation of wall and applying interior grade wall care putty 1 to 1.50 thick to make the surface smooth complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified |
| 12 | M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed. |
| 13 | M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint over a coat of primer complete all as specified and directed. |
| 14 | Taking down wooden chowkhats or frames with shutters n. exc 1.5 sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 15 | All as per item No 14.00 here in above but exc. 1.5 Sqm andnot exceeding 4 Sqm each complete. |
| 16 | S&F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: Hollow portion of frame shall be filled in cement concrete1:2:4 type B0 (using 12.5 mm stone aggregate and the cost of same shall be included in the quoted rates of this item.) |
| 17 | Taking down shutter of any description, exc. 1.5 Sqm but n. exc. 4 Sqm each and removing from site complete all as specified. |
| 18 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified. |
| 19 | S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed. |
| 20 | S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity. |
| 21 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 22 | S & Ffactory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 23 | S & F factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc. complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 24 | S&F powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old window/ventilator and making good of wall surface to match with existing surface complete all as specified and directed : - Frame : 44.5 x 44.5 mm x 1.80 mm thick, Middle rail :44.5 x 44.5 mmx 1.80 mm thick, Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading, Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading. |
| 25 | S&F powder coated aluminium grill with frame fixed to by means stainless steel screws complete all as specified and directed. |
| 26 | S&Fstainlesssteel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 27 | S&F 4 mm thicksheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 28 | S & F stainless steel barrel tower bolts 200 mm long one piece and fixed complete all as specified and directed. |
| 29 | S & F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame , complete all as specified and directed. |
| 30 | S & F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame , complete all as specified and directed. |
| 31 | S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of stainless steel sheet, and stainless steel fixing boltsand fixed complete all as specified and directed. |
| 32 | M & L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed. |
| 33 | Taking down/ dismantling asbestos (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 34 | Dismantling of framed or unframed timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 36 | Refixing (in the same or different location) mild steel work obtained from dismantling of existing mild steel work from item no 35 above including necessary cutting, welding, notching, drilling, etc complete all as specified and directed. |
| 37 | S & F mild steel work in struts, poles and similar work including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 quality-A complete all as specified and directed. |
| 38 | S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe–410-O or Fe–310-O complete all as specified and directed. |
| 39 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and as directed. |
| 40 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws and profile should match with galvalume sheet complete all as specified and directed. |
| 41 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in valley gutters, etc fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and directed. |
| 42 | M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 43 | M & L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified and directed. |
| 44 | M & L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed. |
| 45 | M & L for applying two coats of Synthetic paint on new or previously untreated wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. |
| 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 47 | M&L for 25 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate) as in floor finished complete all as specified and directed. |
| 48 | M&L for nonskid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mmthick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 49 | M&L for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 50 | M&L for double charged vitrified ceramic tiles 10 mm thick (square/ rectangular) polished of any shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:6 set complete all as specified and directed. |
| 51 | As per item No 50 above but as in skirting including 15 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 52 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 53 | M&L for Machine cut kota stone as in skirting 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 54 | M&L heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 and dismantling of existing floor tiling including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and directed. |
| 55 | M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 56 | M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick inground floor and paving below or above ground level complete all as specified and directed. |
| 57 | M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified. |
| 58 | M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified and directed. |
| 59 | M&L for grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed |
| 60 | S&F in repair stainless grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and directed. |
| 61 | Supply and fix in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper panel and partly paneled with 12mm thick both side laminated particle board in lower panel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm,Shutter vertical style :- 85x44.45x1.56mm. |
| 62 | S & F in repairs powder coated Aluminium partition (fixed) made out of aluminium powder coated section 83 x 44.45 x 2.00 mm including 5 mm thick glass/ ACP Sheet complete with rubber packing/ aluminum beading etc including dismantling of existing structure complete all as specified and directed |
| 63 | S & F in repairs aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one noswire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows,and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm, Shutter inner lock size 37.50x15x1.60 mm, Shutter side (Handle) size 37.50x15x1.36mm, Chowkhat bottom size : 50.30x26x1.20mm, Chowkhat top & sides size:50.30x26x1.00mm |
| 64 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 65 | S&F Aluminium (Die Cast body) Door closer hydraulically regulated designation No1 universal type suitable for door shutters up to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed. |
| 66 | S&F in repair Brass Mortice lock, four levers vertical type, size 100 mm size complete all as specified and directed. |
| 67 | S & F rotational moulded polyethylene water storage tanks Capacity of tank 1000 liters triple layer, white colour (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. |
| 68 | S&F in repair full stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cementand waste pipe etc complete all as specified and directed. |
| 69 | Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified and directed. |
| 70 | Taking up or down steel tubing and connection incl removal from site bore of pipe 20 mm complete all as specified and directed. |
| 71 | S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed. |
| 72 | S&F 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed. |
| 73 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n exceeding 10 cm girth complete all as specified and directed. |
| 74 | Supply & fix in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 75 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern) (cascade) single piece, white including dual type flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed. |
| 76 | S & F in repair 10 litre capacity PVC low level cistern ‘white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed. |
| 77 | S & F in repair 75 mm bore UPVC (SWR) pipe pressure 4kgf/sqcm single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed. |
| 78 | S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed. |
| 79 | S & F in repair 75 mm bore UPVC (SWR) bend with oval access door,"T" socket reducer etc complete all as specified and directed. |
| 80 | S & F in repair 110 mm bore UPVC (SWR) bend with oval access door, "T" socket reducer etc complete all as specified and directed. |
| 81 | S & F in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed. |
| 82 | Supply and fixed pillar taps, swan neck type, 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe & fixed. |
| 83 | S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 84 | S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 85 | S&F in repair looking mirror of size 600x450 mm mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed. |
| 86 | S & F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed. |
| 87 | M & L in repair 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed. |
| 88 | S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed. |
| 89 | S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete all as specified and directed. |
| 90 | S & F in repair 20 mm dia bore gun metal gate valve complete all as specified and directed. |
| 91 | S&F in repairs hollow profile PVC Wall Lining not exc 5mm thick of wood grains PVC sheet inclusive of solvent cement and fixing to walls on PVC frame as per specifications and drawing incl cover & support fillets complete all as specified and directed. |
| 92 | M & L broken stone Hard core of gauge not exc 63 mm, deposited, spread, and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified directed. |
| 93 | M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 94 | M&L for sand filling under floors or in foundations including spreading and consolidation complete all as specified directed. |
| 95 | M & L for pre-polished coloured (Red/ Yellow) machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed. |
| 96 | Providing & fixing false ceiling ofDesigner tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross "T" of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c toform a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mmand laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main "T", bottom exposed width of 15mm of all "T"" sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights complete all as specified and directed. |
| 97 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed. |
| 98 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimeter in soft/loose soil complete all as specified and directed. |
| 99 | Removing excavated surplus soil/material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. |
| 100 | M&L for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed. |
| 101 | M&L for PCC (1:3:6) type C-2, using 40 mm graded stone aggregates as in concrete bed for 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed. |
| 102 | M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surfaceand RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed. Note: Reinforcement shall be Measured and Paid for separately under relevant Item(s). |
| 103 | M&L TMT bars 06 to 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 104 | M & L for cuttingintoexistingmanholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete |
| 105 | M&L for construction soakage wells complete of size 1.8m internal dia and 3.0m effective deepth complete all as specified and directed. |
| 106 | M & L for anti termite treatment providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along external wall where along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 107 | M & L anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2(1 cement: 2 coarse sand) to match the existing floors complete. |
| 108 | M & L anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replunging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing walls/ floors complete all as specified and directed. |
| 109 | S & F stainless steel kitchen sink without draining board made of stainless steel 1mm thick, coupling plug, washers and waste pipes including beddingin cement mortar on todwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mmX 330 mm X160 mm complete all as specified and directed. |
| 110 | Dismantling of block board as in kitchen cabinets, cupboards, and similar items and making good disturbed surfaces to match with the existing complete all as specified and directed |
| 111 | S&F 18 mm thick PVC sheet of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets having density not less than 560 Kg/Cum complete as per specifications complete all as specified and directed. |
| 112 | S&F 18 mm thick PVC sheet of one side plain and one side prelaminated colour to make kitchen cabinet partition Shutter/ drawer Front, cupboard shutters density not less than 560 Kg/Cum complete as per specifications and as directed by the Engineer-in-charge. |
| 113 | S&F continuous piano hinges 30 mm width of flap of stainless steel complete all as specified and directed. |
| 114 | S&F 100 mm MS powder coated Hasp and staples safety type, stove annealed black including bolt to hinges plate and fixed with screwed complete all as specified and directed. |
| 115 | S&F 150 mm mild steel powder coated barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 116 | S&F 125 mm mild steel powder coated handles cast type anodised complete all as specified and directed. |
| 117 | Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board, fitting and fixture such as switches, ceiling roses, holders, regulators sockets, light fittings etc removing materials from site and making good disturbed with the existingsurfaces complete all as directed. |
| 118 | M&L for Point wiring with1100 Volts, grade 1.5 Sqmm. (nominal area) ,PVC insulated but unsheathed multistranded copper conductor single core FRLS cable drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty)20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel modular suction boxof thickness 1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire up to common earth and connected to earth dolly including cutting chases for conduits and sinking"s for boxes and making good to walls, floors etc completeall as specified and directed of following. |
| 119 | (a)One light point /fan controlled by one way switch. |
| 120 | (b)One bell point, controlled by bell push switch. |
| 121 | (c)One three pin 5 Amp socket on same board with other switches |
| 122 | (d)One three pin 5 Amp socket on independent board |
| 123 | Allas per ItemNo 118 mentionedhere-in- before but one three pin 15 Amps switch socket out let on the independentboardwith 2.5 sq mmPVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete. |
| 124 | S&F in repairs switch modular 6 Amps 230 Volts one way switch. |
| 125 | S & F in repairs Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt50 Hz 2 module complete all as specified and directed. |
| 126 | S&F in repairs Socket 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified and directed. |
| 127 | S&F in repairs Socket6A/16 Amps-2/3 pin AC 230 Volts combined 2 modular typecomplete all as specified anddirected. |
| 128 | S&F in repairs Switchmodular type AC 230 volts 16 Amps one way complete all as specified and directed. |
| 129 | S & F in repairs Modular white cover plate with frame 2 module complete all as specified and directed. |
| 130 | S & F in repairs Modular white cover plate with frame 3 module complete all as specified and directed. |
| 131 | S & F Modular white cover plate with frame 4 module and metal flush box 4 module complete all as specified and directed. |
| 132 | S & F Modular white cover plate with frame 6 module complete all as specified and directed. |
| 133 | S & F Modular white cover plate with frame 8/12 module complete all as specified and directed. |
| 134 | S & F calling bell ding dong type AC 230 Volt single pole complete all as specified and directed. |
| 135 | Supply and fix in repairs for ceiling rose, Three terminal ISI marked surface Bakelite suitable for batten fitting complete all as specified and directed. |
| 136 | S & Fix in repairs for Lamp holder polycarbonate insulated body, with back plate suitable for batten fitting. |
| 137 | S&F wall mounted LED tube light fitting 1x10 watts, 2 feet extruded aluminiumpolycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. |
| 138 | S&F wall mounted LED tube light fitting 18/20 watts extruded aluminiumpolycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. |
| 139 | S&F in replacement of energy saving, surface mounted, LED 10 watt Bulk head luminaire with decorative ovaldiffuser comprising of high brightness LEDs complete all as specified and directed. |
| 140 | Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete pre-wired including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr including grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old unserviceable fitting complete all as specified and directed. |
| 141 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36-watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 142 | S&F ceiling fan complete 230 V,1200 mm sweep single Phase 230 V / 240V 50 Hz of , connecting up ceiling rose to connector block of fan including fabricating and fixing ofFan hooks from ceiling truss/angle iron, required length of down rods (As per site requirement) and necessarynuts and bolts complete all as specified and directed. |
| 143 | S&F Exhaust fan exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. |
| 144 | Supply and fixing in replacement for Distribution board TPN 4 Way double door, for mounting MCBs/isolator, etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make. |
| 145 | Supply and fixing in replacement for Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L Nofabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester-based powder paint sprayed and baked at high temperature, painted in seven tank process.The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make |
| 146 | S & Fix in repairs MCB TPN 240 Volt 10 KA63 Amp "C" series conforming to IS complete all as specified & directed. |
| 147 | S & Fix in repairs MCB single pole 240-volt, 10 KA, 5-32 Amp, "C" series confirming to IS complete all as specified and directed. |
| 148 | S & Fix in repairs MCB SPN 240 Volt 10 KA32 Amp "C" series conforming to IS complete all as specified and directed. |
| 149 | M&L for sub main wiring in repairs with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium dutyPVC concealed conduit/flexible conduit where required and conduit accessories and fittings. Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 6 Sq mm as earth wire up to common earth and connected to earth dolly complete incl taking out old unserviceable submain complete all as specified and directed. |
| 150 | Material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized wire 4 mm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR part 1 including testing on completion all as specified and directed. including demolition to existing one complete all as specified and directed. |
| 151 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 16 Sqmm 4 Core complete all as specified and directed. |
| 152 | Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete all as specified and directed. Note :- Only punned down sand thickness 18CM shall be measured and paid |
| 153 | Supplying and laying old size bricks, laid flat ie length of brick shall be laid across the cable, common burnt clay building bricks sub class `B" designation 75 complete all as specified and directed and testing on completion complete all as specified and directed. |
| 154 | S&F tube "Light" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
