|
| 1 | Stone Aggregate(single size): 40 mm nominal size |
| 2 | Stone Aggregate(single size):20 mm nominal size |
| 3 | Coarse sand (zone III) |
| 4 | Portland Cement |
| 5 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 6 | Vibrator (Needle type 40 mm) |
| 7 | wall form panel 1250x500 mm |
| 8 | Corner angle 45x45x5 mm 1.50 m long |
| 9 | 100 mm channel shoulder 2.5 m long |
| 10 | Double clip (bridge clip) |
| 11 | Single clip |
| 12 | M.S. Tube 40 mm dia |
| 13 | Twisted steel/deformed bars |
| 14 | Stone Aggregate(single size): 10 mm nominal size |
| 15 | laterate stone of size 40x20x15cm |
| 16 | Solid blocks of size 40x20x15cm |
| 17 | Fine sand (zone IV) |
| 18 | Plasticizer / super plasticizer |
| 19 | Production cost of concrete by batch mix plant |
| 20 | Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. |
| 21 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
| 22 | Wall form panel 1250x450xmm |
| 23 | Corner angle 45x45x5 mm 2.50 long |
| 24 | Column clamp 450x1070 mm |
| 25 | Prop 2 m (2-3.5m) |
| 26 | Multi surface paint |
| 27 | Special primer (C.W) |
| 28 | 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
| 29 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 30 | Anjili wood scantls |
| 31 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 32 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 33 | Bright finished or black enameled mild steel screws 40 mm |
| 34 | Bright finished or black enameled mild steel screws 20 mm |
| 35 | Anjili wood planks |
| 36 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 37 | Vitreous china flat back wash basin 550x400 mm |
| 38 | 15 mm C.P.brass tap |
| 39 | C.P. brass waste 32 mm |
| 40 | C.I. bracket for wash basin and sinks |
| 41 | Vitreous China orrisa type w.c. pan size 580 mm |
| 42 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 43 | 100 mm S.C.I. trap with vent heel |
| 44 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 45 | PVC pipe 50 mm outer dia.6kgf/cm2 |
| 46 | PVC pipe 20 mm outer dia 10 kfg/cm2 |
| 47 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 48 | PVC pipe 110 mm outer dia 6kgf/cm2 |
| 49 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 50 | Vitrified floor tile 50x50 cm |
| 51 | Stone for masonry work |
| 52 | G.I pipes 50 mm dia |
| 53 | Mild steel tubes hot finished welded type |
| 54 | Red oxide Zinc chromate primer |
| 55 | Welding by electric plant |
| 56 | GI trafford profile sheet 0.35mm thick |
| 57 | Bitumen washer |
| 58 | Stainless steel screws 50 mm |
| 59 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 60 | Wire nails |
| 61 | Solid blocks of size 30x20x15cm |
| 62 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 63 | Synthetic enamel paint in black or chocolate shade |
