|
| 1 | 293 Stone Aggregate(single size): 40 mm nominal size |
| 2 | 295 Stone Aggregate(single size):20 mm nominal size |
| 3 | 297 Stone Aggregate(single size): 10 mm nominal size |
| 4 | 367 Portland Cement |
| 5 | 982 Coarse sand (zone III) |
| 6 | 983 Fine sand (zone IV) |
| 7 | 1004 Average rate of mild steel round bars for reinforcements |
| 8 | 1005 Twisted steel/deformed bars |
| 9 | 1007 Structural steel such as tees, angles, channels and R.S. joists |
| 10 | 1157 Stone for masonry work |
| 11 | 1208 Bitumen washer |
| 12 | 1219 Wire nails |
| 13 | 1235 Diesel oil |
| 14 | 1706 R.C.C. pipes NP2 class 600 mm dia |
| 15 | 1720 R.C.C. collars NP2 class 600 mm dia |
| 16 | 4202 Red oxide Zinc chromate primer |
| 17 | 7239 Epoxy paint |
| 18 | 7319 wall form panel 1250x500 mm |
| 19 | 7326 Corner angle 45x45x5 mm 1.50 m long |
| 20 | 7327-100 mm channel shoulder 2.5 m long |
| 21 | 7328 Double clip (bridge clip) |
| 22 | 7329 Single clip |
| 23 | 7330 M.S. Tube 40 mm dia |
| 24 | 7331 Wall form panel 1250x450xmm |
| 25 | 7332 Corner angle 45x45x5 mm 2.50 long |
| 26 | 7333 Column clamp 450x1070 mm |
| 27 | 7334 Prop 2 m (2-3.5m) |
| 28 | 8210 Stainless steel screws 50 mm |
| 29 | 2-Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 30 | 12-Vibrator (Needle type 40 mm) |
| 31 | MR10 Anjili wood scantls |
| 32 | MR103-75mm dia PVC pipe working pressure 4kg per sq.cm |
| 33 | MR105 Thambakam wood |
| 34 | MR106 Hire charge of 5 HP engine and pump set |
| 35 | MR11 Anjili wood planks |
| 36 | MR11001 GI trafford profile sheet 0.35mm thick |
| 37 | MR113 Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 38 | MR39 PVC pipe 15 mm outer dia 10kgf/cm2 |
| 39 | MR4 Solid blocks of size 30x20x15cm |
| 40 | MR9 laterate stone of size 40x20x15cm |
| 41 | MR3 Solid blocks of size 40x20x15cm |
