|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) areaexceeding 1.50 sqm each but not exc 4 Sqm each complete, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost ot Govt),complete all as specified and directed by Engineer-in-Charge. |
| 2 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying& fixing in the frame at site, complete all as specified and directed by Engineer-in-Charge. |
| 3 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed by Engineer-in-Charge. |
| 4 | S&F 100 MM handles, 100 MM extruded aluminum alloy handles, fabricated type anodised, complete all as specified and directed by Engineer-in-Charge. |
| 5 | S&F 100MM aluminum anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F 100 MM medium weight hinges, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for 15mm thick rendering onfair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4, complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L Applying two coats of cement base painton new plastered surfaces including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for preparation newly plastered surface and applying two coat of white washing, complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying onecoats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removingserviceable tiles to stores and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge. |
| 14 | M & L Non -skid coloured Ceramic tiles 7 to 8 mm tick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over screed bed 15mm thick in CM 1:6, set and jointed in neat cement slurry and pointed in wite or coloured cement to match with the shade of tiles, complete all as specified and directed by Engineer-in-Charge. |
| 15 | M & L glazed (coloured) ceramic tiles of size 350mm x 250mm x 7/450x350x7 mm thick, as on vertical surfaces, over 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles, complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F in repairs Vitreous China squatting pan \"Orissa\" pattern,size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) with PVC (SWR)100 mm \"P\" or \"S\" trap, complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets,flushing pipe including of brackets, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Hacking out old broken glass( any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads, complete all as specified and directed by Engineer-in-Charge. |
| 19 | S & F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Taking up or down 25/32 mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and directed by Engineer-in-Charge. |
| 21 | S & F polypropyene random copolymer (PPR) (SDR 7.4 & SDR 11 UV) 3 layer pipe with and including SFMC fitting such as bends elbow, tee short length socket union check nuts nipple etc (famale and male as required complete of size 25 mm bore suitable for hot/ cold water supply line including testing complete all as per manufacture instructions, complete all as specified and directed by Engineer-in-Charge. |
| 22 | S & F in repairs 15mm bib taps with chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 23 | S & F in repair15mm bore stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including waste pipe and angle back size 430 X 370 X 340 MM Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed by Engineer-in-Charge. |
| 25 | Demolition of reinforced cememt concrete of any description and in any position not otherwise specificallyprovided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed by Engineer-in-Charge. |
| 26 | Dismantling wrought iron or mild steel work of any description, , complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L for mild steel steel TMT bars 10mm dia and over cut to length bent to shape required ,including cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia for manhole/soakage well cover, complete all as specified and directed by Engineer-in-Charge. |
| 28 | M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slabs and the like position set in cement mortar 1:6 complete all as specified and as directed (reinforcement shall be measured & paid separately. |
| 29 | Dismantling of cast iron PVC 100mm or reinforced concrete pipes jointed iin cement mortar and taking out of trenches if reqd of any dia, complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F 110mm dia bore PVC pipes single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber ring joints , laid in trenches or in floors including PCC 1:4:8 type D-2 (using 40mm draded aggregate) bed to drain, complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F 110mm bore PVC (SWR) pipe bends, complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repairs Waste coupling of PTMTfor 32mm bore dia pipe (half or full threaded) minimum weight 32mm -45 gms/40mm -60gms), complete all as specified and directed by Engineer-in-Charge. |
| 33 | S & F in repair 500 litres capacity rotational moulded polythylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old one, complete all as specified and directed by Engineer-in-Charge. |
| 34 | S&F in repair 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe and fixed in repair, complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in repair gate valve 25 MM, complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in repair 20 MM Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&FPowder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc, complete all as specified and directed by Engr-in-Charge. |
| 38 | Supply and fixingSheet glass 5.5 mm thick, exc 0.5 sqm in each pane, complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L for 2nd class softwood clean sawn as in scantling fixed with nails in section, complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for 2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and n.exc 25 Sqcm in section, complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F for 18/19 mm thick block boards grade 2 quality interior grade commercial type fixed with screws to timber frame work, complete all as specified and directed by Engr-in-Charge. |
| 42 | M&L for 9mm thickprelaminated particle board interior grade , prelaminated both side with decorated choice laminationfixed with screws/nails to aluminium frame work as in partition wall,including necessary joining cleats, glazing clips, rubber neoprene packing,complete all as specified and directed by Engr-in-Charge. |
| 43 | S&Ffor, Cast brass fanlight pivot and catches with plate size 25mmx 65 mm and suitable for shutter of 30mm thickness, complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F, 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished finished ,complete all as specified and directed by Engr-in-charge. |
| 45 | S & F 40 mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed by Engr-in-charge. |
| 46 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed by Engr-in-Charge. |
| 47 | S&Faluminium door closer (aluminium extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg, complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F brass mortice lock four levers (Harrisons) vetrical type size 100mm or above in old or new position, complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F Providing and fixing factory made PVC white colour casement/sliding window/door, made of extruded profiles. Profi l e s of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastener s, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Note:-Each member of window to be measured separately wrth clear lengt, Sliding Door (two track, 2/4 shutters)(a) Two track sliding frame (60mm x 62mm)(b) Sliding door Sash (85 mmx42mm)(c) Sliding interlock for door (one vertical length in each shutter) (45.5 mmx 28mm)(d) Sliding glazing bead (24.5mmx16mm)(e) Reinforcement frame (30 mmx21.5mm) x 2 nos(f) Reinforcement sash (30 mmx28mm) |
| 50 | M&L for 7mm thick non skid coloured ceramic tiles (area of each tile exc 0.06 andnexc 0.11sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments, complete all as specified and directed by Engr-in-Charge. |
| 51 | M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, complete all as specified and directed by Engr-in-Charge. |
| 52 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, complete all as specified and directed by Engr-in-Charge. |
| 53 | M&L for Point wiring for one light point or fan point or bell point controlled by one switch with PVC insulated FRLS copper conductor stranded cable of size 1.5 sqmm and includingPVC casing/caping terminated inpressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.00mm thick plastic lamiated sheet cover , complete all as specified and directed by Engr-in-Charge. |
| 54 | All as peritem No. 54 here -in-before but 1.5 sqmm for one 3 pin 5 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on same board, complete all as specified and directed by Engr-in-Charge. |
| 55 | All as peritem No. 55 here -in-before but 1.5 sqmm for one 3 pin 5 Amps socket outlet independent including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly, complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L for point wiring for 3pin 15 Amps socket outlet independent with FRLS copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2 .5 sqmm PVC copper conductor as earth wire connected to earth dolly and includingPVC casing/caping with sunk cast iron, complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F switch socket outlet , 3pin 5 Amps pianoflush type single pole ISI marked complete, complete all as specified and directed by Engr-in-Charge. |
| 58 | S&Fsocket outlet 3 pin 5Ampsflush type , complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F switch socket outlet 2in 1, 3 pin 5 and 15 Amps pianoflush type single pole ISI marked , complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F switch pianoflush type single pole one way 5 Amps ISI marked , complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F ceiling rose surface bakelite two orthree terminal , complete all as specified and directed by Engr-in-Charge. |
| 62 | Supply and fixing surface/wall mounted LED fittings with LED tube 18 watts, 6000Kcapacity decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 4 feet long type bracket including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings, complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F of LED 36 Watt recessed 2x2 luminaire (Warm/ white) to enhance the delight of occupants with comfortable experence through its design & glare free soft illumination and connection of 3 core copper wire with all assessories , complete all as specified and directed by Engr-in-Charge. |
| 64 | S&Fof MCB DB TPN4Waydouble door415Volt 50Hz with complete accessories, complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F of MCB DB SPN Regal Gray12Way double door 240Volt 50Hz with complete accessories, complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F MCB TPN63Amps \"C\" series , complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F for MCB SPN 32 Amps \"C\" series , complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F for MCB SP 5-32Amps \"C\" series, complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for sub main wiring with 4 runs of FRLS PVC insulated multistrand, copper conductor cable of size 16 Sqmm along with tworun of 16 sqmm for earth wire PVCinsulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing caping, complete all as specified and directed by Engr-in-Charge. |
| 70 | M&L for 80mm dia MS pipe heavy grade \"C\" Class with insulation of MS pipe PUF Slab 40mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete heavy grade class, \"C\" with welded ends laid in ducts over the angle iron supports/ fixed on the walls includingfittingscomplete all as specified and directed by Engr-in-Charge.Note : The item rate is inclusive of cutting to any levels/shapes like elbows, tees, bends etc, welding joints wherever necessary as per the site requirement) |
| 71 | All as per item No.71 above but of size 50mm,complete all as specified and directed by Engr-in-Charge. |
| 72 | All as per item No.71 above but of size 32mm,complete all as specified and directed by Engr-in-Charge. |
| 73 | All as per item No.71 above but of size 25mm,complete all as specified and directed by Engr-in-Charge. |
| 74 | All as per item No.71 above but of size 20mm,complete all as specified and directed by Engr-in-Charge. |
| 75 | M&L for Cast iron Butterfly valve of size 80mm dia with SG Iron Dice flanged ends (integrally cast) horizontal type, conforming to IS-14846 (ISI marked) with stainless steel spindle and iron wheel non rising type including jointing material complete such as rubber or fibre board insertion packing rings with requisite numbers of nuts, bolts & washers etccomplete all as specified and directed by Engr-in-Charge. |
| 76 | All as per item No.76 above but of size 50mmcomplete all as specified and directed by Engr-in-Charge. |
| 77 | S&F inlet/outlet forged brass ball valve 20 mm with Y Stainer for FCU, hot water for -25 to 90 degree temperature as per existing, including supply and fixing GI nipple of size 3/4 inch including welding work, cutting the existing rusty unserviceable MS/GI nipple complete all as specified and directed by Engr-in-Charge. |
| 78 | S&FFCU heavy duty connection flexible pipe 20/16 mmcomplete all as specified and directed by Engr-in-Charge. |
| 79 | Supply and fixing ofChilled/HotWater Fan coil Unit (FCU) vertical type Floor Mounting 600/1.5TR (CFM/TR) Capacity incl 02 Nos of 20mm valve with stainer (inlet&outlet)incl heavy duty PVC pipe for connection, complete all as specified and directed by Engr-in-Charge. |
