Tender For Repairs To Footpath, Chainlink Fencing Gate And Barbed Wire Fencing At Jaffarpore, Kanchrapara And Los Dumdum Under Ge ( Af ) Barrackpore.; 1 Demolition Of Cement Concrete ( Unreinforced ) In Ground Floors And Paving N.Exc. 15Cm Thick ( Below Or Above Ground Level ) And Removal Of Rubbish From The Site Complete All As Specified And As Directed. 2 Demolition Of Cement Concrete ( Reinforced ) Of Any Description And In Any Position Not Otherwise Specifically Provided Including Reinforcement Cut As Required To Facilitate Demolition And Removing Debries From Site Of Work Complete All As Directed. 3 Demolition Of Brick Work Or Stone Boulder Masonry, Built In Cement Mortar Including All Quoins, Arches, Pillars Etc.Including Removing Of Unserviciable Material From Site Complete All As Specified And Directed. 4 Demolition Of Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Any Description Or Thickness In Floors, Aprons Etc. Complete All As Specified And Directed. 5 Taking Down Cement Plaster Of Any Description Built In Cement Mortar On Brick Or Stone Walls Etc Including Racking Out Joints, Hacking For Key, Scrubbingdown With Water Etc. And Removing Debrish From Site Complete All As Specified And Directed. 6 Dismantling Of Fencing Wire Mesh Of Barbed Wire / Chain Link Or Any Type Including Removing Of Debris From Site Complete All As Specified And Directed. 7 Dismantling Posts Or Struts Embedded In Concrete, Brick Work Masonry Etc. ( Wood, Steel Or R.C.C. ) Any Section, Including Taking Out Embedded Portion And Making Good Disturbed Ground Including Removing Of Debris From Site Complete All As Specified And Directed. 8 Excavation In Post Holes ( Or Similar Holes ) Each N.Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around In Layers Not Exceeding 25 Cm, Watering And Removing Surplus Soil To A Distance N.Exc 50M And Making Good Disturbed Surface In Soft / Loose Soil Complete All As Specified And Directed. 9 Material And Labour For Pcc ( 1:2:4 ) , Type B1, ( Using 20Mm Graded Stone Aggregate ) , As In Coping, Bed Plate, Kerbs, Water Troughs And Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating, Including Necessaryformwork Complete All As Specified And As Directed 10 Material And Labour For Pcc ( 1:3:6 ) Type C2 ( Using 40 Mm Graded Stone Aggregate ) As In Foundation, Filling And Mass Concrete Complete All As Specified And Directed. 11 Material And Labour For Pcc ( 1:3:6 ) Type C2 ( Using 40 Mm Graded Stone Aggregate ) As In Surface Channelsor Culvert Or Drains Complete All As Specified And Directed. 12 Material And Labour For Pre-Cast Rcc ( 1:2:4 ) Type B1 ( Using 20 Mm Graded Stone Aggregate ) In Landings, Cover Slab, Chulla Hoods, Chajjas, Water Troughs, Shelves And Similar Articles Of Any Thickness And Size And Set Incement Mortar ( 1:4 ) Including Necessay Formwork Complete All As Specified And Directed. 13 Material And Labour For Brick Work With Sub Class `B` Bricks, Old Size, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar ( 1:6 ) Complete All As Specified And Directed. 14 Materials And Labour For Half Brick Thick Brick Work With Sub Class `B` Bricks, Old Size, Straight Or Curved On Plan To Any Radius Built In Cement Mortar ( 1:4 ) Complete All As Specified And Directed. 15 Supply And Fix Mild Steel Works As In Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embedding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets ( For Securing Wire Mesh Etc. ) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Including Dismantling Of Wrought Iron Or Mild Steel Work Of Any Description Complete All As Specified And Directed. 16 Material And Labour For Mild Steel Tmt Bar 10 Mm Dia And Over Cut To Length Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed. 17 Supply And Fix Mild Steel Screw Bolts Diameter Of Neck 5 To 10Mm ( Machine Made ) With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut, N Exc 5Cm Long Complete All As Specified And Directed. 18 Material And Labour For Mild Steel Round Bars 10 Mm Dia In Fencing Conforming To Fe-410-W ( Gde-E-250 ) Quality-A Complete All As Specified And Directed. 19 Material And Labour For 100Mm Thick Pcc ( 1:2:4 ) Type B1 ( Using 20Mm Graded Stone Aggregate ) As In Floor And Pavings Etc And Finished The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 20 Material And Labour For 75Mm Thick Pcc ( 1:3:6 ) Type C-2 ( Using 40Mmgraded Stone Aggregate ) As In Sub Base Of Floors, Pavings Etc Complete All As Specified And Directed. 21 Material And Labour For Joint Free Anti Skid ( Good Grip Series ) Outdoor Pavement Coloured Tiles Of Size 300 X 300 X 10Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tiles Laid Over And Including 15Mm Thick Screed Bed In Cement Mortar ( 1:6 ) Complete All As Specified And Directed. 22 Material And Labour For 80Mm Thick And M-40 Grade Machine Pressed Precast Cement Concrete Interlocking Paver Blocks Of Any Shape And Size Confirming To Is-15658-2006 Laid Over And Including 25Mm Thick Sand Filling Complete All As Specified And As Directed. 23 Material And Labourfor 15Mm Thick Rendering In Cement Mortar ( 1:4 ) On Fair Faces Of Brick Work Or Concrete Surfaces And Finish The Surfaceseven And Smooth Without Using Extra Cement As In Wall Complete All As Specified And Directed. 24 Material And Labour For Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade ( Company Depot Tinted ) With Silicon Additives @ 1.43 Litre / 10 Sqm Over And Including Priming One Coat Of Exterior Primer Applied @ 0.90 Litre / 10 Sqmcomplete All As Specified And Directed. 25 Materials And Labour For Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Cement Base Paint Over A Coat Of Alkali Resistance Primer Complete All As Specified And As Directed. 26 Supply Only 3.15Mm Dia Chain Link Ms Galvanisd Fencing Of Size 100 X 100Mm Complete All As Specified And Directed. Note:- Weight Of Chain Link Fence Shall Be Ascertained Through Boo. 27 Fixing Only Chain Link Fencing Including Line Wire, Any Mesh, Any Mesh, Size And Type To Any Type Of Standards, Rails, Straining Bolts, Etc. Including Provission Of Binding Wires Complete All As Specified And Directed. 28 Supply And Fix Galvanised 2 Strand, Steel Barbed Wire 2.24Mm Dia. Barbed With 2Mm Dia. Barbs At 75Mm Spacings And Straining And Fixing To Any Type Of Standard Rails Straining Bolts, Including, Securing Or Tying At Crossings With And Provision Of Galvanised Mild Steel Wire, Staples Or Steel Pins, Etc. Complete All As Specified Anddirected.Note: Each Line Wire To Be Measured. 29 Supply Only 4Mm Dia Galvanised Mild Steel Plain Wire Complete All As Specified And Directed. 30 Material And Labour For Preparation Of New Steel Surfaces Of Any Description N.Exc 10 Cm Width Or Girthand Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified And Directed. 31 Material And Labour For Preparation Of New Steel Surfaces Of Any Description Over 10 Cm Width Or Girthand Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified And Directed. 32 Supply, Fabrication And Fix Retro Reflective Sign Board Made Out Of 2Mm Thick Stainless Steel And Providing Approved Colour Sticker On Front Side Of Stainless Sheet And Lettering Made With Retro Reflective Sheet ( Encpsulated Lens Type ) Complete All As Specified And Directed.Note:- Frame Work, Pcc, Excavation For Fixing Of Sign Board Shall Be Measured And Paid Seperately Under Respective Items Here In Before.
