|
| 1 | (I) PROVISION OF TEMPORARY STORAGE ACCN NEAR BUILDING NO 257 |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or forshafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m indepth and getting out in hard / dense soil complete all as specified and directed |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layersnot exc 25 cm. in hard / dense soil complete all as specified and directed |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed |
| 5 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard / dense soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed |
| 6 | Material and labour for PCC (1:4:8) type D-2 (using 40mm gradedstone aggregate) as in foundation,filling and mass concrete complete all as specified and directed. |
| 7 | Material and labour for moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 8 | Material and labour for hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 9 | Material and labour for cement concrete 100mm thick type B- 2, 1:2:4 (using 40mm graded stone aggregate) as in floor finshes complete all as specified and as directed. |
| 10 | Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 11 | Material and labour mild steel plates (plain or chequred) channel square cut notched ordinary and counter sunk forming holes without any attachment for Fe-410w grade E-250 quality \"A\" complete all as specified and directed. |
| 12 | Supply and fixingmild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other end n.exc 5 cm long and diameter of neck exc 5 mm but n exc 10mm dia complete all as specified and directed. |
| 13 | Supply and fixing pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 14 | Material and labour for brickwork with sub class \"B\" Bricks , straight or curved in plan exc 6 m mean radius built in CM (1:4) complete allas specified and directed. |
| 15 | Material and labour for brickwork with flyash bricks (old size bricks) , straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified and directed |
| 16 | Material and labour for rendering 15mm thck in CM 1:4 including finishing even and smooth without using extra cement complete all as specified and directed.(110+0+150+0) |
| 17 | All as per item No 15 above butrendering 10mm thck in CM 1:6 complete all as specified and directed.(115+0+150+0) |
| 18 | Supply only integral water proofing compound ISI Marked complete all as specified and directed.(25+0+125+0) |
| 19 | Material and labour for preparation of newly plastered externalwall surfaces by applying two coats of cement base paint over a coat of primercomplete all as specified and directed |
| 20 | Material and labour for preparation of newly plastered externalwall surfaces by applying two coats of OBD over a coat of primer complete all as specified and directed |
| 21 | Material and labour for preparation of newly steel surfaceover 10 cm girth andapplying 2 coats of synthetic enamelpaint over acoat of red oxidezincchromeprimercomplete all as specified and as directed. |
| 22 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 23 | Material and labour for machine cut kota stone slab flooring 20-25mm thick over cementcreed base laid and jointed with grey cement slurry mixed withpigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 24 | Material and labour screed bed or bedding layer of 1:6 cement mortar 15 mm thick for laying floor finishes complete all as specified and as directed. |
| 25 | Suplly and fixing framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 26 | Suplly and fixing providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed. |
| 27 | Material and labour for sheet glass 4.8 mm thick obscured or figurred one side, fixing with rubber bidding or neoprane packing etc complete all as specified and as directed. |
| 28 | Material and labour providing precast cement concrete in1:2:4 type B1 (using 20 mm graded stoneaggregate) inwindow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings,throating etc. and setting in mortar 1:4complete with joints to match complete all as specified and as directed. |
| 29 | (II) PROVN OF CERTAIN E&M WORKS FOR INSTALLATION OF TELEPRESENCE SOLUTION AT AOC-IN-C MINI CONFERENCE HALL AT HQ MC BLDG |
| 30 | Material and labour for sub main wiring (concealed/surface as required) complete with four single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 32 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 10 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 5 run of 10 sqmm & one run of PVC conduit shall be measuredas single unit |
| 31 | Material and labour for sub main wiring (concealed/surface as required) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 3 run of 6 sqmm & one run of PVC conduit shall be measuredas single unit |
| 32 | Material and labour for point wiring (surface) complete with FRLS PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 2.5 Sq mm (nominal area) multi stranded copper conductor cable drawn through PVCconduit or casing and caping (size of casing and caping as required in ground) including all accessories with suitable modular boxes surface type and switch plates with 2.5 Sq mm coppr earth continuity wire connected to earth dolly complete for one 16A socketall as specified and directed.. |
| 33 | Supply & fixing socket modular type 16 Amps, 3 pin combine, 2 module, 240 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Seimens/ Anchor Roma/ L & T |
| 34 | Supply & fixing switch modular type 16 Amps, one way with indicator, 1 module, 240 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Seimens/ Anchor Roma/ L & T |
| 35 | Supply & fix sheet metal enclosures for SPN DB\"s with metal double door for incorporating MCBs, IP-43, 4 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. |
| 36 | Taking down old unserviceable and supply & fixing MCB SPN, 32 Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed. |
| 37 | Taking down old unserviceable and supply & fixMCB SP 10-32Amps, breaking capacity 10 KA \"C\" curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed. |
| 38 | (III) IMPROVEMENT TO TOILET BLOCK AND CERTAIN B/R REPAIR WORKS IN BLDG NO 273 AT,VSN NAGPUR |
| 39 | Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.(0+0+90+231) |
| 40 | Material and labour non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in cement mortar (1:6) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tilesall as specified and directed. |
| 41 | Material and labour glazedceramiccolour tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mmthick over and including rendering 10mm thick CM 1:4 setand jointed in neat cement slurry and pointed in white or colour cement to match with thetile colour complete as specified and directed |
| 42 | Supply and fixing in repair stop valve15mm dia ofPTMT any colour high pressure screwedfor ironpipeand fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed |
| 43 | Supply and fixing PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 44 | Supply and fixing PVC(SWR) Bend 110mm borecomplete all as specified and as directed. |
| 45 | Supply and fixing PVC(SWR) Tee 110mm borecomplete all as specified and as directed. |
| 46 | All as per item No 40 but 75 mm bore |
| 47 | All as per item No 41 but 75 mm bore |
| 48 | All as per item No 42 but 75 mm bore |
| 49 | Suplly and fixing in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) all as specified and directed. |
| 50 | Material and labour for PVC (SWR)floor trap with grating,75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed. |
| 51 | Supply and fixing high density polyethylene pipes (HDPE) 15mm of pressure rating 6 kgf/cm2fixed complete to walls, ceilings or in floors etc. including taking down old one all as specified and as directed. |
| 52 | Supply and fixingHigh density polyethylene pipes (HDPE) 20mm of pressure rating 6 kgf/cm2fixed complete to walls, ceilings or in floors etc. including taking down old one all as specified and as directed. |
| 53 | Supply and fixingin repair cast iron nahani trap, with grating100 mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed. |
| 54 | Supply and fixingin repair bib cock, fancy type of PTMT any colour high pressure, 15mmall as specified and directed. |
| 55 | Supply and fixing in repairhand shower (health faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & wall hook all as specified and as directed. Make ;-Jaquar CODE-ALD 587 or equivalent in Zoloto/ Leader |
| 56 | Supply and fixing in repair pillar cock 15mm dia, swan neck tap with left hand operating knob with 450mm long braided hose all as specified and as directed.Make ;-Jaquar Code- CON-123BKN or equivalent in Parryware/ Prayag |
| 57 | Supply and fixingin repair 2-way bib cock 15 mm dia with wall flange, chromium plated all as specified and as directed.Make ;-Jaquar CODE-FUS-29041 or equivalent in Zoloto/ Leader |
| 58 | Supply and fixing in repair angle cock, chromium plated, 15mm, Make ;-Jaguar or equivalentor equivalent in Zoloto/ Leader |
| 59 | Supply and fixing in repair stop cock, chromium plated all as specified and as directed., Make ;-Jaquar, Code- FON-40053or equivalent in Zoloto/ Leader |
| 60 | Supply and fixingin repair soap dish holder (CP Brass) all as specified and as directed., Make ;-Jaguar, code-AKP-35731Por equivalent inParryware/ Cera |
| 61 | Supply and fixing in repair towel rail all as specified and as directed., Make -Jaguar, Code-AQN-7711 or equivalent in Parryware/ Cera |
| 62 | Supply and fixingin repair toilet paper holder with flap all as specified and as directed., Make-Jaguar,Code-AKP-35753PSor equivalent in Parryware/ Cera |
| 63 | Supply and fixing in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed |
| 64 | Supply and fixingin repair vitreous chain squatting pan, \"Orrissa pattern\" size 630x450mm white with integral foot rests,including PVC \" P\" or \"S\" trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed. |
| 65 | Supply and fixingin repair vitreouschina wash down water closet pan (Pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed. |
| 66 | Supply and fixing in repair plastic water closet seat cover, black/white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed. |
| 67 | Supply and fixingin repairPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 68 | Supply and fixingin repair vitreous china wash basin, white, flat back of size 550 x 400 mm including CI brackets,waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450mmetc complete all as specified & as directed. |
| 69 | Supply and fixing in repair waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 6 Kgf/Sq cm complete all as specified & as directed. |
| 70 | Supply and fixing in repair vitreous china urinal, half stall type,white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 71 | Supply and fixing600mmx450mm bevelled edge looking mirror of selected quality glass ounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed. |
| 72 | Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 73 | Material and labour Rendering 5 mm thick on ceilingin CM (1:3) finished the surface even and smooth without using extra cemen complete all as specified and directed. |
| 74 | Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 75 | Preparation of newly plastered or un-plastered surfaces of walls, and applying two coats of cement based paintcomplete all as specified. |
| 76 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distempr over a coat of primer complete all as specified and s directed. |
| 77 | Material and labour for preparation of old plastered ceiling surfaces and applying two coats of distemper oil emulsion complete all as specified and directed |
| 78 | Material and labour preparation of old plastered wall surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsioncomplete all as specified and directed |
| 79 | Material and labour preparation of old plastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed |
| 80 | Material and labour preparation of old plastered external wall surfaces with complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed. |
| 81 | Material and labour preparation of old plastered externalwall surfaces and applying one coats of cement base paintcomplete all as specified and directed. |
| 82 | Material and labour for 3mm thick wall care putty on wall complete all as spcified. |
| 83 | Material and labour for preperation of old painted surfaces, onecoat of synthetic enamelpaint over a coat of red oxidezincchromeprimeron steel surfaceover 10 cm girth including preparation of surface complete all as specified and as directed. |
| 84 | Material and labour for preparation of old plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 85 | All as per item No 79 above but on ceiling. |
| 86 | Material and labour for providing 75mm thick PCC (1:3:6) type C2 using 40 mm graded aggregate as plinth protection/ path finished the surface even & smooth with out using extra cement complete all as specified. |
| 87 | Taking up or down steel tubing 15 mm bore and connections complete all as specified and as directed. |
| 88 | All as per item No 85 above but 20 mm bore and connections complete all as specified and as directed. |
| 89 | Supply and fixing GI Tubes, ‘mediumgrade’, galvanised, Concealed with all fitting 15mm bore including cutting of Stone , Concrete Block or Slabwalls and making goodcomplete as specified and directed. |
| 90 | All as per item No 86 above but 20 mm bore |
| 91 | Material and labour for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approvedake conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete as specified and directed. |
| 92 | Material and labour for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides withequired EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling,CPbrass/ stainless steel screws complete as specified and directed. |
| 93 | Supply and fixing aluminium louvered type ventilator weighing 0.55 kg/mtr with4 mm thick frosted glass with all fittings closing and opening type using powder coated aluminium sections of approved make confirming to IS.(Glazing shall be measured and paid seperately) complete all as specified and directed. |
| 94 | Material and labour for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening as per specification complete all as specified and directed. |
| 95 | Supply and fixing30mm thick (styles) factory made solid panelPVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together withsolvent cement and fixing in the frame at site all as shownon drawing on page 146 of SSR Part-II 2004 including taking down the old PVC door shutters as specified & as directed. |
| 96 | Material and labour for prelaminated particle board 12 mm thick, exterior grade, prelaminated both sides with decorative choice laminations as per site requirementfixed withAluminiumframe workas in door/fixed frame work /partition complete all as specified and directed. |
| 97 | Supply and fixing tintedglass 5 mm thick,of selected quality,for aluminium Doors,windows,with all nessasary fittingsconfirming to IS allas specified and directed by Engr-in-Charge. |
| 98 | Supply and fixingdoor closer hydraulically regulated, designation No 3,aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one complete all as specified and directed. |
| 99 | Supply and fixing4 levers brass mortice lock for aluminium door, size 100 mm all as specified and directed. |
| 100 | Taking down chowkats with shutters (without taking off shutters from the frame)exe 1.5 sqm but n.exc 4sq.m all as specified and directed. |
| 101 | Material and labour for aluminium alloy, anodised, sliding door bolt (250mm long) with hasp,nstaple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-uminium alloy and fixed complete all as specified and as directed |
| 102 | Supply and fixing floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorcomplete all as specified and as directed |
| 103 | Supply and fixingstainless steel butt hinges medium weight of size 100mm longcomplete all as specified and as directed |
| 104 | Supply and fixingaluminium handle cast type anodisedof size 150 mm longcomplete all as specified and as directed |
| 105 | Supply and fixingaluminium anodiesed barrel tower bolt of extruded section of size 200 mm complete all as specified and as directed |
| 106 | Supply and fixingstainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed. |
| 107 | Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed. |
| 108 | Supply and fixingsheet glass ordinary quality obscured or frosted on one side 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed. |
| 109 | Material and labour for sheet glass, selected quality and glazing with oil putty in squares n exc 0.5 sq. m in each for window glazing complete all as specifiedand as directed. |
| 110 | Supply and fixing flush shutters, 30mm thick solid core construction, with blockboard core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 111 | Supply and fixingharrison curtain rails, 19/20mm dia, fancy type powder coatedaluminium alloy with fixing brackets, stops, rollers etc including taking down old one all as specified and as directed. |
| 112 | Supply and fixingapplying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed. |
| 113 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 114 | Material and labour for repairs to ends of chajja by removing old loose concrete material, cleaning the reinforcement and finishing the surface by applying the epoxy based resin of manufacturer pedicrete and chowkasi and make good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with appoxy coating and applying two coats of weather proof emulsion paint over a coat of primer up to 600 mm depth and 100 mm thickness including necessary scafolding and formwork as required at site up to 15 mtr height etc. complete all as specified and as directed. |
| 115 | Material and labour for integral water proofing compound ISI Marked complete all as specified and directed. |
| 116 | Material and labour for preparation of surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying liquid water proofing and seepage proof product ofDr. Fixit, Pidicrete or equivalent in Asian / Sika / Chokesy Ltd.in two coats as per manufacture instruction mix with cement on wall/ floor surafce . Note:- Application of liquid water proof material only will be carried out thorugh manufactures.(0+0+100+231) |
| 117 | Material and labour for dampness rectification on external wall surface :- surface preparation: Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammere etc up to brick level.Coating: Applying two coats of Dr fixit pidifin 2k/ berger or equivalent in SIKA/ STP (a two component , anti-fungal, acrylic waterproofing coating) over cleaned surface with brush and allowing it to dry for 24 hrs Finishing the surface: Applying plasterover the treated surface withwater proofing compound and applying 1 coat ofputty over plaster to provide proper finish after that one coat of acrylic based single component liquid elastomeric water proofing coating (Berger HS W/C roof guard or equivalent) with synthetic fibre @ 20% dilution over base coat and 2 coat of premium polyurethene based acrylic emulsion (Berger platina weather coat long life or equivalent) as finish coat in desire shade after proper curing as directed Note:- The rate for saffolding at any height shall demmed to be included in quoted rate. |
| 118 | (IV) RENOVATION OF FOUNTAIN AT BLDG NO 234 (HQ MC) AT VSN, NAGPUR |
| 119 | Material and labour for 15mm thick rendering on fair faces of brick masonry or concrete surfaces of wall in CM (1:4), complete all as specified and as directed. |
| 120 | Material and labourfor glazed china mosaic tiles in vertical/ floor surface 25mmx 25 mmx 4 mm thick, set and jointed inrequired adhesive material completed as per manufactures instructions complete all as specified and directed.Note:- Make/ shade/ colour/ pattern of tile shall be aprroved by GE/ Engineer-in-charge before execution of work. |
| 121 | Supply and fixing of ornamental white polished marble fountain of approximate height of 1.2-1.5 metre and dia of 0.750-1.00 mtr (base floor) three floor as per requierment complete all as specified and as directed. Note :-Size, pattern and colour shall be as per drawing attched or as approved by EIC/GE before procurement and fixing. |
| 122 | Supply and fix GI tubing light grade 40 mm dia with all fitting inside the fountain including suitable support made out of GI pipe heavy grade,flange nut bolt , bend, wherever required . Note The cost of fixing of nozzle in pipe, making holes/ fixing arrangement for nozles, welding of pipe, making any pattern, all required accessories for nozzle fixingshall deemed to be included in the quoted rate. |
| 123 | All as per item N o 118 but 25 mm bore |
| 124 | Supply and fixing cascade Gyser nozzels 25 mm size to produce a graceful conical shaped while display. The water level dependent aerated display is suitable for calm to light wind condition and exhibite excellent light reflecting properties complete all as specified |
| 125 | Supply and fix high power underwater LED light - 12W RGB LED 12 V which is safe and reliableLEDs can be operated through panel or remote and 10 lighting patterns are available in RGB.(multicolour) water proof luminaries ip 65 protection withof high out put of LEDs housed in complete enclosure of stainless steel body toughened glass with elastomer seal special plastic cable gland compact socket head fastners and mountingbracket are all of stainless steelprovided for aiming the object all as specified and directed. |
| 126 | Supply and fixing fountain light controller 25 A, 220 to 12 V complete all as specified |
| 127 | Supply, lay and fiing flexible cable1.5 sqmm 3 core PVC insulated and sheathed submersible type with stranded copper conductor (for light) all as specified and directed. |
| 128 | All as per item No 124 above but2.5 sqmm 3 core |
| 129 | Supply and installsubmersible pump starter with inbuilt single phasing preventer suitable for submersible pump set3 ph 415 volt 5 HP for water fountainall as specified and directed.Make : L & T Catpart No SS97756COVO or equivalent in Crompton/ Kirloskar/ KSB |
| 130 | Supply and install open well submersible pump set5 HP, 06-20 mtr head flow rate 62 Cum/Hr at 10 Mtr head and pump shaft is made out of SS 316 & mechanical sealsuitable for water fountainall as specified and directed. |
| 131 | Supply and fix MCBTP 25 Amps capacity having breaking capacity 10 KA \"C\" curveall as specified and directed. |
| 132 | Supply and fix MCBSP 6-32 Amps capacity having breaking capacity 10 KA \"C\" curveall as specified and directed. |
| 133 | Material and labour for sheet metal enclosure out door type made out of 3 mm thick MS sheet for mounting 02 Nos starters, 03 Nos TPN MCBs and 03 Nos SP MCBs with necessary mounting arrangements including paintingall as specified and directed. |
| 134 | Supply and fix gun metal gate/globe valves with iron wheel head screwed both end for iron pipe size 40 mm all as specified and directed. |
| 135 | Supply and fixgun-metal, globe or gate valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and supply fixed new one all as specified and as directed. |
| 136 | Supply and fix garden irrigation green hose pipe PVC material with fibre reinforce 40 mm bore including suitable metal clamps with nut and bolts all as specified and as directed. |
| 137 | Taking down existing submerssible pump set keep it in safe custody and re-fixing the same afterre-tiling etc all as specified and as directed. |
