Military Engineer Services-MES has published Tender For Special Repairs To Iron Windows Iron Gates Tiles And Structural Members Of Building P482 Nasdo Portion Only At Nasdo Goa And Provision Of Cementing Resurfacing Work Near Ress I And Ii At Ins Hansa Under Age Br I Of Ge Nw Vasco. Submission Date for this Tender is 05-10-2023. Window Supply Tenders in vasco Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Sep-2023 | Revised BOQ | Other | 05-10-2023 |
| 2 | 26-Sep-2023 | Revised BOQ | BOQ | 05-10-2023 |
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and removing away from site complete all as specified and as directed. |
| 2 | Taking down chowkat or framesexc 1.5 sqm but n. exc 4 sqm each (w/o taking off shutters from the frame) and removing away from site complete all as specified and as directed. |
| 3 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 sqm each |
| 4 | Supply and fix factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 5 | M&L Granite of work for 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over screed bed in CM 1:4, 15 thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 6 | S&F 4mm thick sheet glass ordinary quality in squares exceeding 0.5 sqm each pane complete all as specified and as directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 8 | M&L Virified Ceramictiles10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors laid over & incl 20 mm thick screed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and as directed. |
| 9 | All as per item No.8 here in before but as in skirting/dado but over 10 mm thick rendering over CM 1:4 |
| 10 | M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & incl 20 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 11 | M&Lcoloured Glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm/ 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchover & including 10mm thick screed bed in CM 1:4.complete all as specified and as directed. |
| 12 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 13 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 14 | M&L for preparation of steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth complete all as specified and as directed. |
| 15 | Taking down loose & damaged concrete / cement plaster from sofits of ceilings, floor / roof slabs, vertical surfaces of columns, beams slabs etc, including exposing and removing rust from the reinforcement by rubbing with wire brush and removal of debris to a distance n.exc 100 mtr and depositing complete all as specified and as directed. |
| 16 | M&L for gunniting exposed concrete surfaces of beam, column and slabs with one layer of conplast spray set modified concretein proportion (50Kg cement 3 to 6mm granite chips 75 kg zonal sand 75 kg and complast 2% by weight of cement water 1 to the following locations complete all as specified and as directed. |
| 17 | 40 mm thick in columns |
| 18 | 30 mm thick in beams |
| 19 | 20 mm thick in slabs |
| 20 | Bonding the entire exposed surface with one coat of fosroc Nitop bond SBR as per manufacturer insltructions over where fabric and surfaces of concrete structure |
| 21 | S&F hard drawn steel wire fabric cut to length bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dianot exc. 4 Kg/sqm complete all as specified and as directed. |
| 22 | Taking down cement plastering at any description on brick or stone wall etcincluding rakingout joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed. |
| 23 | M&L for Rendering 15 mm thick cement plaster on concrete solid block walls in two coatsfirst coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid seperately. |
| 24 | M&L for rendering 15 mm thick in CM 1:6 on concrete solid blockwall internalsurfacefinished even and smooth without using extra cement. |
| 25 | Supply only liquid water proofing compound |
| 26 | M&L for Preparing new plastered wall surfaces and applying twocoat ofoil bound distemper over primer, on plastered surfaces, preparatory to distempering, after applying 1-2mm thick wall care putty on wall |
| 27 | M & L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and as directed. |
| 28 | M&L for complete removal of existing treatment and Preparing old plastered ceiling surfaces and applying two coat ofoil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering,on ceiling. |
| 29 | M&L for complete removal of existing treatment and Preparing old plastered wall surfaces and applying two coat ofoil bound distemper over chalk whiting, on plastered surfaces, preparatory to distempering, after applying 3mm thick wall care putty on wall complete all as specified and as directed. |
| 30 | M & L for preparation by complete removal of existing treatment of painted walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm all as specified and as directed. |
| 31 | M&L Excavating over areas, n exc 1.5 m deep and getting out in soft disintegrated rocks complete all as specified and as directed. |
| 32 | Rolling and consolidating formations in cuttingand filling using 8 to 12 tone powerroller including side berms complete all as specified. |
| 33 | M&LSoling (or sub base) 100 mm thick in two layers with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified. |
| 34 | M&L PCC 1:4:8 type D2 (40mm aggregate) in foundations filling and mass concrete complete all as specified and as directed. |
| 35 | M & Lfor PCC M-30 Design mix using 20 mm gradedstone aggregate) in hardstanding complete all as specified and as directed. |
| 36 | Removing Excavated soils to a distance exc 250 m but not exc 500 Mand depositing at a level n.exe 1.5m above the starting point complete all as specified and as directed. |
| 37 | M&L forming construction joint 30 mm deep x 10 mm wide filled with sealing compound grade "A" complete all as specified and as directed. |
| 38 | M&L forming contraction(Dummy) joint 65 mm deep x 10 mm wide filled with sealing compound grade "A" complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
