Military Engineer Services-MES has published Tender For Repairs To Flooring, Plastering, Sanitary Fitting, Plumbing, Joinery And Certain Misc Work At Gandhinagar And Repairs To Sewage Line, Manhole Covers, Rain Water Pipes At Gandhinagar Under Ge(Af) Chiloda. Submission Date for this Tender is 14-10-2023. Sewerage Construction Tenders in gandhinagar Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 2 | M&L for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 3 | M&L for preparing of oldsurfaces of ceilingand applying one coat of distemper oil emulsion complete all as specified and directed. |
| 4 | M&L for preparing of old surfaces of wallsand applying one coat of distemper oil emulsion complete all as specified and directed. |
| 5 | M&L for preparing of old surfaces of wallsand applying two coat of distemper oil emulsion complete all as specified and directed. |
| 6 | M&L for preparing of oldsurfaces of walls and applying one coat of cement based paint complete all as specified and directed. |
| 7 | M&L for preparing of oldsurfaces of walls and applying two coat of cement based paint complete all as specified and directed. |
| 8 | M&L for preparing old surfaces of wall and applying one coat of exterior emulsion paint complete all as specified and directed. |
| 9 | M&L for preparation of old wood surfacesof any description, not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 10 | M&L for preparation of old painted steel and iron surfacesof any descriptionover 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 11 | M&L for preparation of old painted surfaces of wall / concrete surfacesover 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L for preparation of oldpainted steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 13 | DismantlingofCorrugated, Semi corrugated, steel, fibre sheets in roof coverings complete all as specified and directed. |
| 14 | S&F 0.63 mm thick, Galvanized, corrugated mild steel sheeting with two corrugation side lap,fixed with coach screws , in roof coverings walls etc with grade of zinc coating 275 complete all as specified and directed. |
| 15 | S&F pre-coated galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screw, complete all as specified and directed. |
| 16 | S&F 2 mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 18 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, complete all as specified and directed. |
| 19 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls, complete all as specified and directed. |
| 20 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 21 | M&L for Glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 22 | M&L for Glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 23 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc complete all as specified and directed. |
| 24 | All as per item No 23 here in before but on vertical surfaces/skirting. |
| 25 | M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) insteps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 26 | Taking down Shutters of any description exc 1 sq.but n.exc 2 sqm each complete all as specified and directed. |
| 27 | Taking down chowkats or frames with shutters (without taking off shutters from frames) size n. exc 1.5 sq mtr each complete all as specified and directed. |
| 28 | Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm & n.exc 4.00 Sqm each complete all as specified and directed. |
| 29 | S&F 30mm thick flush door shutter, solid core constructionwith block board core and ply wood face panels, commercial type on both faces complete all as specified and directed. |
| 30 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and directed. |
| 31 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 32 | M&L for glazed and skeleton shutters 30 mm thick 1st class hard wood open rebated and prepared to receive glass divided into squares rebated sash vars any numbers, edges of framming plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.24 (a) supply and fixed to chowkat, complete all as specified and directed. |
| 33 | S&F aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed. |
| 34 | S&F 150mm size aluminum handles, cast type anodised complete all as specified and directed. |
| 35 | S&F aluminum anodized barrel tower bolt of extruded section, length of bolt 150mm complete all as specified and directed. |
| 36 | S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 37 | S&F in repair door closer hydraulically regulated designation No 3 universal type, aluminium (Die Cast) body (extruded section ) suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 38 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm length complete all as specified and directed. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 40 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 41 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1998 grade St.-240 complete all as specified and directed. |
| 42 | Hacking out old broken glass (any thickness , size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 43 | S&F for 4 mm thick sheet glass oridinary quality and glazingwith oil putty in square not exc 0.5 sq.m in each pane complete all as specified and directed. |
| 44 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed. |
| 45 | M &L Brick work with sub class "B", old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 46 | Taking down cement or cement lime plaster any description incl racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 47 | M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed. |
| 48 | M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed. |
| 49 | M&L for 10mm thick cement plaster in CM 1:3 as in ceilling finished even and smooth without using extra cement complete all as specified and directed. |
| 50 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 51 | M&L for preparation of new wood surfacesof any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 52 | M & L preparing newsurface of wall and applying two coat ofoil emulsion distemper over a coat of chalk whiting complete all as specified and directed. |
| 53 | M & L preparing newsurface of wall and applying two coat ofcement base paint over a coat of chalk whiting complete all as specified and directed. |
| 54 | Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed. |
| 55 | Dismantling water tanks exc 250 but n.exc 500 Litres capacity complete all as specified and directed. |
| 56 | Dismantling water tanks exc 500 but n.exc 1000 Litres capacity complete all as specified and directed. |
| 57 | S&F rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed. |
| 58 | S&F rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed. |
| 59 | S&F in repair 20 mm ball brass valves, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25 mm -455 gms /40mm - 690 gms) complete all as specified and directed. |
| 60 | S&F in repair 25 mm ball brass valves, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25 mm -455 gms /40mm - 690 gms) complete all as specified and directed. |
| 61 | Disconnecting existing tanks exc 250 and n. exc 500 ltr , setting aside (or loweringif required)for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position includingCleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position. |
| 62 | Disconnecting existing tanks exc 500 and n. exc 1000 ltrsetting aside (or loweringif required)for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position includingCleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position. |
| 63 | Taking up or down steel tubingpipe and connections upto 15 mm bore complete all as specified and directed. |
| 64 | S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 65 | S&F 15mm bore unplasticised PVC pipeswith all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 66 | S&F in repair vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 67 | S&F, in repair vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed. |
| 68 | S & F in repair vitreous china wash down water closet pan (pedestal pattern ) p or s type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 69 | S&F in repair 10 litres capacityPVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed. |
| 70 | S&F in repair plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed. |
| 71 | S&F in repair 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and directed. |
| 72 | S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed. |
| 73 | S&F in repair Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed. |
| 74 | S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for runions and fixed to 15mm bore pipe complete all as specified and directed. |
| 75 | Supply and fix in repair 32 mm size waste pipe for wash hand basin / urinal / sink complete all as specified and directed. |
| 76 | S&F in repair toilet paper holder complete all as specified and directed. |
| 77 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 78 | S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed. |
| 79 | S&F in repair 600x 450 mm beveled edge mirror of selected quality of glass, mounted on 6 mm thick AC bldg board or commercial ply wood and fixed to wooded plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 80 | S&F in repair aluminum anodized barrel tower bolt of extruded section, length of bolt 125mm complete all as specified and directed. |
| 81 | S&F in repair CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and directed. |
| 82 | S&F in repair Stainless steel sink with drainage board made out of 1 mm thick sheet of overall size 915x460mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and directed. |
| 83 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 84 | Demolition of Cement concrete(unreinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 85 | M&L for 75mm thick Cement concrete Type D21:4:8 (40 mm graded gradedaggregate) as in floor finishes and pavings complete all as specified and directed. |
| 86 | M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 87 | M & L Chequred cement concrete tiles 20cm x20cmx 25mm thick with grey cement and pigment , set jointed in neat cement slurry complete all as specified as directed. |
| 88 | M&L for sand filling/sand cushioning of interlocking tilesunder floors or in foundations of any description of work including watering and consolidation complete all as specified as directed. |
| 89 | M&L machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed. |
| 90 | All as per item No 89 here in before but except tiles. |
| 91 | M&L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever complete all as specified and as directed. |
| 92 | S&F Powder coated aluminium work for door, windows and ventilators andpartition wall with one or more rebates fixed in position as per manufacturer"s instruction including necessary joining cleat, glazing clips, rubber packing, beading etc complete all as specified and directed. |
| 93 | S&F 5mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass edges exc 0.5 Sqm in each pane complete all as specified and directed. |
| 94 | M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and directed. |
| 95 | S & Fin repair MS mortice lock vertical type 4 lever of size 100 mmcomplete all as specified and directed. |
| 96 | S & F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and directed. |
| 97 | S&F in repair aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed. |
| 98 | S&F in repair grating round 140mm size of PTMT (Minimum weight 50 gms) complete all as specified and directed. |
| 99 | S&F in repair soap dish SS, complete all as specified and directed. |
| 100 | Dismantling/removal of old membrane, geotextile etc materials of any description and removal material out of MOD land/sites complete all as specified and directed. |
| 101 | M&L 40mm average thickness PCC 1:2:4 type B0 using 12.5mm graded aggregate as in padding and (roof levelling course) on roof surfaces complete all as specified and directed. Note- Water proofing compound to be used @ 3% by weight of cement content for concrete padding work. |
| 102 | M&L for rendering in CM (1:3) 10mm thick over RCC roof, chajja/ brick wall mixed with water proofing compound @ 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed. Note - WPC shall be measured and paid separately. |
| 103 | Supply only integral water proofing compound complete all as specified and directed. |
| 104 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) including priming the plastered surfaces in all respect and land on primed surfaces by forced application complete all as specified and directed. |
| 105 | M&L ATT Along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 106 | Repairs to 1st class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing including taking down old beads complete all as specified and directed. |
| 107 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 108 | Providing and fixing Gypsum Board605 x 605 x 12mm thick in ceiling fixed with screw as per manufacturer"s instructions, complete all as specified and directed. |
| 109 | S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and directed. |
| 110 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) (size of grid 605x605mm ) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 111 | S&F in repairs coloured vertical vanishing blind having minimum 75mm width of strip complete with all its accessories fixed to wall with screws complete all as specified and as directed by Engineer-in-Charge |
| 112 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5 in depth and getting outIn soft soil complete all as specified and directed. |
| 113 | All as per item No 112 here in before but exc 1.5 m and upto 3.0m deep. |
| 114 | All as per item No 112 here in before but exc 3.0m and upto 4.5m deep. |
| 115 | Returning filling in including spreading,levelling,watering and well ramming in later on exceeding 25 cm in soft and loose soil complete all as specified and directed. |
| 116 | Removing excavated material n exc 50 m and depositing where directed at level not n exc. 1.5 m above the starting point complete all as specified and directed. |
| 117 | M&L for PCC (1:3:6) type C2 (40mm graded broken stone aggregate) as in foundation of manholes including necessary for work complete all as specified and directed. |
| 118 | M&L for brick work with sub class "B" bricks strainght or curved on plan exc 6 mtr mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 119 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping or benching of manhole etc including necessary formworks complete all as specified and directed. |
| 120 | Demolition and breaking up salt glazed stone ware drain pipe incl PCC packing under hunching against the sides of bed and complete PCC bed. a) 150mm dia pipe |
| 121 | All as per item No 120 here in before but 200 mm dia pipe. |
| 122 | Dismantling of cast iron or reinforced concrete drain pipe incl PCC packing under haunching against the sides of bed and complete PCC bed. a) 75 mm dia pipe |
| 123 | All as per item No 122 here in before but 100 mm dia pipe. |
| 124 | M&L for class "A" salt glazed stone ware drain pipe (ISI marked) of approved make laid in trenches jointed in CM 1:1 complete all as specified and directed. a) 150 mm dia pipe |
| 125 | All as per item No 124 here in before but 200 mm dia pipe. |
| 126 | M&L for concrete bed to drain pipes including packing under and haunching & packing against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2, 40mm graded complete. a) 150mm dia pipe |
| 127 | All as per item No 126 here in before but 200 mm dia pipe. |
| 128 | S&F Cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints, laid in trenches or in floors, fixed in repairs, complete all as specified and directed. a) 75 mm diaPipe |
| 129 | All as per item No 128 here in before but 100 mm dia Pipe. |
| 130 | All as per item No 128 here in before but fixed to walls. a) 75 mm diaPipe |
| 131 | All as per item No 130 here in before but 100 mm dia Pipe |
| 132 | Desilting of man hole up to 1.50m depth and stacking the silt at the distance exc 100m but not exc 250m,complete all as specified and directed by Engineer-In-Charge. |
| 133 | All as per item No 132 here in before but depth of man-hole exceeding 1.50m and not exceeding 2.50m complete. |
| 134 | All as per item No 132 here in before but depth of man-hole exceeding 2.50m and not exceeding 3.50m complete. |
| 135 | Desilting of soakage well/septic tank for 50 users with dewatering including carriage of sludge from tank and disposed to a distance out of MOD land,complete all as specified and directed by Engineer-In-Charge. |
| 136 | All as per item No 135 here in before but septic tank of 100 users complete. |
| 137 | All as per item No 135 here in before but septic tank of 150 users complete. |
| 138 | All as per item No 135 here in before but septic tank of 300 users complete. |
| 139 | Cleaning of WC/EWC and removal of blockage by pumping of waste, complete all as specified and directed by Engineer-In-Charge. |
| 140 | Cleaning of nahani trap 75mm dia and removal of blockage, complete all as specified and directed by Engineer-In-Charge. |
| 141 | Cleaning of gully trap of size 125/110mm and removal of blockage, complete all as specified and directed by Engineer-In-Charge. |
| 142 | M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:4 incl necessary form work and demolition complete all as specified and as directed by Engr in charge. |
| 143 | Removal of blokage/choke up obstructing the flow of sewage line ofstoneware pipe and RCC pipe between two consecutive manholes or gully trap to manhole by rodding with rods/wood/kamathis/ choke removerand flushing water in line after rodding to clean the line for 100mm dia pipe complete all as specified and directed by Engineer-In-Charge. |
| 144 | All as per item No 143 here in before but for 150 mm bore pipe complete. |
| 145 | All as per item No 143 here in before but for 200 mm bore pipe complete. |
| 146 | Cutting in to existing manhole of any type for connecting bore new drain, making good to pipe and rendering, cutting-out existing benching, for and forming branch channel( ½ round or ¾ section) in cement concrete 1:2:4 type B1, smooth finish and reforming benching as required complete all as specified and directed by Engineer-In-Charge. a) 150mm dia pipe |
| 147 | All as per item No 146 here in before but 200 mm dia pipe |
| 148 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 149 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 150 | S&F in repair Cast iron pipes bends (any radius), diminishing pieces or tapers 75mmdia (larger bore measured) complete all as specified and directed. |
| 151 | S&F in repair Cast iron pipes bends (any radius), dimisishing pieces or tapers 100mmdia (larger bore measured) complete all as specified and directed. |
| 152 | S&F in repair Cast iron pipes branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm dia complete all as specified and directed. |
| 153 | S&F in repair branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm dia complete all as specified and directed. |
| 154 | S&F in repair PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 155 | S&F in repair PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints,fixed to walls complete all as specified and directed. |
| 156 | S&F in repair PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints,fixed to walls, complete all as specified and directed. |
| 157 | S&F in repair PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed. |
| 158 | S&F in repair PVC (SWR) bends any radius 75mm dia complete all as specified and directed. |
| 159 | S&F in repair PVC (SWR) bends any radius 110mm dia complete all as specified and directed. |
| 160 | S & F in repair Grating in square of 150 mm size of PTMT complete all as specified and directed. |
| 161 | Demolition of stone slabs & tiles of anythickness & in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and directed. |
| 162 | M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm / 30cmx30cmx25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over andincluding 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 163 | M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 80mm thickness M-40 grade complete all as specified and directed. |
| 164 | All as per item No 163 here in before but except tiles. |
| 165 | M&L for preparation of old painted surfaces of wall / concrete surfacesover 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 166 | M&L for preparation of new surfaces of wall / concrete surfacesover 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
