|
| 1 | Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 50 Sqmm x 3.5 Core, laid in trenches / duct / on pole including taking down complete all as specified and directed.Make :- Havells / KEI / Polycab / Gloster / Finolex |
| 2 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed. |
| 3 | Removing of excavated surplus soil to a distance n. exc 50 m and depositing wheredirected at a level n. exc. 1.5 m above the starting point complete all as specified and directed. |
| 4 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 5 | M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid. |
| 6 | Supply & laying sub class \"B\", class designation 75 bricks of old size, laid along alignment of cable as protection to cable in trenches including taking out old bricks complete all as specified and directed. |
| 7 | Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 50 mm bore at a depth 0.75 m to 1.0 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m complete all as specified and as directed.Note:- GI Pipe shall be measured and paid separately. |
| 8 | S&F 50mm bore galvanised steel tubing, medium grade with necessary fittings, laid under road crossing / along pole / wall, for cable protection complete all as specified and directed.Make - Tata / Jindal Steel / Surya Roshni Ltd. /Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd |
| 9 | S&F in repairs LED flood light fitting not less than 900 watt, IP-66 (minimum), lumen output not less than 110000, colour temperature =5700K, THD<10%, PF>0.95, SDCM<5, operating voltage 120-270V, SPD of capacity 10KV, integrated type, with high efficiency electronic driver, High pressure die cast aluminium housing, heat proof silicon rubber and high transmittance tempered glass coverwith and including all other necessary fixing accessories such as MS flat iron clamps made out of MS flat, nuts, bolts & washers as per OEM including painting to clamps with two coat of aluminium paint over a coat of red oxide primer, aiming the lights to get required luminance on the ground, including electrically connecting & taking down old unserviceable flood light fittings from any position at a height exceeding 7.5 m complete all as specified and as directed.Make:- Crompton / Havells / Bajaj / Signify Innovations India Ltd. |
