Tender For Provision Of Lighting Arrangement In A-109 Kamla Nagar, 33 Block Shakti Nagar Near Fci Godown, Dda Flat Gulabi Bagh, 2 / 99 Roop Nagar, 19 / 5 Shakti Nagar And Other Locations In Kamla Nagar Ward Number 69 Under Keshavpuram Zone, Delhi-Delhi

Provision Of Lighting Arrangement In A-109 Kamla Nagar, 33 Block Shakti Nagar Near Fci Godown, Dda Flat Gulabi Bagh, 2 / 99 Roop Nagar, 19 / 5 Shakti Nagar And Other Locations In Kamla Nagar Ward Number 69 Under Keshavpuram Zone; 1 Od3193 / 2023-2024:Earthing With G.I. Earth Pipe 4.5 Meter Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. ( But Without Charcoal / Coke And Salt ) As Required. 2 Od3192 / 2023-2024:Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface / Recessed Conduit / Submain Wiring / Cable As Required. 3 Od3191 / 2023-2024:Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc / Hume / Metal Pipe As Required.Up To 35 Sq.Mm. 4 Od3190 / 2023-2024:Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existingmasonry Open Ductas Required.Up To 35 Sq.Mm. 5 Od3189 / 2023-2024:Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 63 Mm Dia ( Od-63 Mm & Id-51 Mm Nominal ) 6 Od3188 / 2023-2024:Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc. In The Existing Trench, Complete As Required. 63 Mm Dia ( Od-63 Mm & Id-51 Mm Nominal ) 7 Od3187 / 2023-2024:Supply And Fabrication Of Pole Protection System Made Up Of 8Swg Steel Wire Mesh Of Size25mmx75mm Rectangular With 50Mmx50mmx6mm Ms Angle Iron For Supporting The Mesh I / C Mv Danger Plateand Grounding The Protection System In Suitable Quality Of Cc Etc. 8 122.1.2:Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*6 Sqmm 9 122.1.55:Supply Of Pvc Insulated And Fr Pvc Sheathed Multicore Copper Conductor 1.1Kv Grade, Conforming To Grade Is 694 As Required . 3*1.5 Sq.Mm 10 122.2.8:Fabrication, Supply & Erection Of Following Size Flange Mounted Hot Dip Galvanized Octagonal Pole Made From Ht Steel Plate, Window With Flash Cover With Full Vertical Window Cover At Appropriate Height From The Base Plate On Existing Cement Concrete Pedestal As Required. I / C Supplying And Fixing Of 6 Mm Thick Laminated Mounted Sheet Inside The Window Mounted On And I / C Providing And Welding 3 Nos. Gi Strips 4 Mm Thick Of Suitable Length And Having Suitable Size Tapped Holes As Reqd, Terminal Block Suitable For 25 Sq Mm Conductor - 4 Nos. & Shorting Links On Din Channel I / Cpdg And Fixing Din Channel Of Suitable Length, , 6 Amp. Spmcb C Characteristics, Earth Stud, Cable Support Clamp Suitable For Upto 4X25 Sqmm Cable. Logo / Name Of Manufacturer Shall Be Embossed On The Pole. Galvanization As Per Relevant Is. 4.0 Mtr Height, 3 Mm Thick, Bottom Dia Of 130Mm & Top Dia Of 70Mm Base Plate Of Size 225 X 225 X 12 Mm Thick 11 122.2.33:Sitc Of 60W Led Street Light Luminaire Fitted With Lens, Top Opening Driver Cover Made Of Pressure Die Cast Aluminium Housing & Toughened Glass Cover Complete With The Following Specification As Reqd With Ip 66 Protection ( A ) Total System Wattage =60 Watt + / - 5% ( B ) Luminaire Efficacy>=100 Lm / W ( C ) Power Factor>=0.95 ( D ) Protection Class- Ip-66 12 122.2.17:Fabrication, Supplying And Fixing Class B Galvanised Double Overhang Arm Bracket Made Out Of 250Mm Long Galvanised Top Tube With Cap And 250Mm Long 32 Mm Dia Galvanised Pipes With Tightening Bolts Complete As Required. 13 122.2.15:Fabrication, Supplying And Fixing Class B Galvanised Single Overhang Arm Bracket Made Out Of 250Mm Long Galvanised Top Tube With Cap And 250Mm Long 32 Mm Dia Galvanised Pipe With Tightening Bolts Complete As Required. 14 122.2.10.A:Providing And Laying In Position M25 Grade Reinforced Cement Concrete Foundation Of Size 450 Mm ( L ) ×450 Mm Wide And 1000 Mm Deep I / C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia- 960 Mm Long ( Approx ) -8 Nos. And Reinforcement Of Cold Twisted Bars Of 8 Mm Dia- 1400 Mm ( Approx ) -6 Nos. ( With 150 Mm Spacing ) As Required With Supplying And Positioning Of 4 Nos. Foundation Bolts16 Mm Dia, 600 Mm Long, J Type I / C 2 Nos. Template Anchor Plates Of Size 225Mm×225Mm×3Mm And Providing Dwc Hdpe For Cable Entry And Exit As Required For 3 M And 5 Mtr Pole. 15 122.2.19:Fabrication, Supplying, Installation, Testing, Commissioning Of 12 Mtr High Mast System With Its Accessories , Mast Shaft Shall Be In One Section , Hot Dip Galvanized 4Mm Thick ( Single Dip ) Inside & Out Sides &Suitable For Wind Velocity As Per Is 875 Part3 .There Shall Be In Longitudinal Seam Weld Per Section And No Circumferential Weld. It Should Also Included Accessories For High Mast Head Frame , 2 Point Suspension System, 5*2.5 Sqmm Cu Conductor With Steel Wire Rope 5Mm Dia. ( 7 / 19Construction ) Single Drum Winch , Galvanized Lantern Carriage Arrangement Suitable For 4 / 6 Nos. Flood Light Luminariessymmetrically And Its Control Gears Boxes And Lighting Finial , The Mast Shall Have Integral Type Manual Tool Mounted At The Base Compartment Of Its Raising And Lowering Operation With Foundation Bolts And Anchor Plate And Control Panelhousing Suitable Rcc ( 1:2:4 ) Shallowfoundation Of Size 1M ( L ) X 1M Wide And 2M Deep I / C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -2100Mm Long ( Approx. ) - 16 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia - 3700 Mm ( Approx. ) - 13 Nos. ( With 150 Mm Spacing ) As Required With Positioning Of Foundation Bolts And Providing Dwc Hdpe Pipe For Cable Entry & Exit As Required For The High Mast Considering The Safe Soil Bearing Capacity At Site As 10T / Sqm At 2Mts. Depth With All Material I / C 4Nos S.P Mcb, 63Amp.Dpisolator Etc As Reqd. Logo / Name Of Manufacturer Shall Be Embossed On The Pole. Galvanization As Per Relevant Is. 16 122.2.30.A:Sitc Of 150W Led Flood Light Luminaire Fitted With Lens, Made Of Pressure Die Cast Aluminium Housing & Toughened Glass Cover Complete With The Following Specification As Reqd With Ip 66 Protection ( A ) Total System Wattage =150 Watt + / - 5% ( B ) Luminaire Efficacy>=100 Lm / W ( C ) Power Factor>=0.95 ( D ) Protection Class- Ip-66 17 122.2.25:Providing And Fixing Of Stainless Steel Name Plate Of Size 6×8 Sq Inch Made Of 20 Gauge Sheet Including Engraved Name Of Area Representative Duly Painted Along With Ss Clamp Nut Bolt Etc As Required 18 110.10:Providing And Fiving Name Board Made Of Ms Sheet 90X60cm, 1Mm Thick With Frame Of Ms Angle 50X50x6mm, Two Diagonal Braces At The Back Of The Sheet Of Ms Flat 40X6mm, Total Height Of The Board Above Ground Level 2.40M, Length Of Legs Below Ground 0.30M Embedded In Cc Block 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20Mm Nominal Size ) 30X30x45cm Including Excavation And Removal Of Surplus Earth With In 50M Lead, Applying Priming Coat Of Approved Steel Primer, Painting With Synthetic Enamel Paint Of Approved Quality And Lettering With Enamel Paint Of Approved Colour ( One Side ) As Per Drawing / Direction Of Engineer-In-Charge

INR 590 /-

INR 18018.0 /-

INR 8.99 Lakhs /-

Name of Work: Provision of Lighting Arrangement in A-109 Kamla Nagar, 33 Block Shakti Nagar (near FCI Godown), DDA flat Gulabi Bagh, 2/99 Roop Nagar, 19/5 Shakti Nagar & other locations in Kamla Nagar Ward Number 69 under Keshavpuram Zone

Sl. No.	Item Description
1	OD3193/2023-2024:Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.
2	OD3192/2023-2024:Providing and Fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.
3	OD3191/2023-2024:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/ METAL pipe as required.Up to 35 sq.mm.
4	OD3190/2023-2024:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existingmasonry open ductas required.Up to 35 sq.mm.
5	OD3189/2023-2024:"Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)"
6	OD3188/2023-2024:Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
7	OD3187/2023-2024:Supply and fabrication of pole protection system made up of 8SWG steel wire mesh of size25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh i/c MV Danger plateand grounding the protection system in suitable quality of CC etc.
8	122.1.2:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm
9	122.1.55:Supply of PVC insulated and FR PVC Sheathed multicore copper conductor 1.1KV grade, conforming to grade IS 694 as required . 3*1.5 Sq.mm
10	122.2.8:Fabrication, supply & erection of following size flange mounted hot dip galvanized octagonal pole made from HT steel plate,window with flash cover with full vertical window cover at appropriate height from the base plate on existing cement concrete pedestal as required. i/c supplying and fixing of 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 nos. GI strips 4 mm thick of suitable length and having suitable size tapped holes as reqd, terminal block suitable for 25 sq mm conductor - 4 nos. & shorting links on DIN channel i/cpdg and fixing DIN channel of suitable length,, 6 Amp. SPMCB 'C' characteristics, earth stud, cable support clamp suitable for upto 4x25 sqmm cable. Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS.  4.0 mtr height, 3 mm thick, bottom dia of 130mm & top dia of 70mm base plate of size 225 x 225 x 12 mm thick
11	122.2.33:SITC of 60W LED Street Light luminaire fitted with lens, top opening driver cover made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with IP 66 protection (a) Total system wattage =60 watt +/- 5% (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class- IP-66
12	122.2.17:Fabrication, supplying and fixing class B galvanised double overhang arm bracket made out of 250mm long galvanised top tube with cap and 250mm long 32 mm dia galvanised pipes with tightening bolts complete as required.
13	122.2.15:Fabrication, supplying and fixing class B galvanised single overhang arm bracket made out of 250mm long galvanised top tube with cap and 250mm long 32 mm dia galvanised pipe with tightening bolts complete as required.
14	122.2.10.a:Providing and laying in position M25 grade reinforced cement concrete foundation of size 450 mm (L) ×450 mm wide and 1000 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 960 mm long(approx)-8 nos. and reinforcement of cold twisted bars of 8 mm dia- 1400 mm (approx) -6 nos.(with 150 mm spacing) as required with supplying and positioning of 4 nos. foundation bolts16 mm dia,600 mm long, J type i/c 2 nos. template anchor plates of size 225mm×225mm×3mm and providing DWC HDPE for cable entry and exit as required for 3 m and 5 mtr pole.
15	122.2.19:Fabrication,Supplying,Installation,testing,Commissioning of 12 mtr high mast System with its accessories ,Mast shaft shall be in one section , hot dip galvanized 4mm thick(Single dip ) inside & out sides &suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circumferential weld. It should also included accessories For High Mast head frame ,2 point suspension system, 5*2.5 sqmm Cu conductor with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos. Flood Light luminariessymmetrically And its control gears boxes and lighting finial ,the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panelhousing suitable RCC (1:2:4) shallowfoundation of size 1m(L) x 1m wide and 2m deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia -2100mm long (approx.) - 16 nos.and reinforcement of cold twisted bar of 8 mm dia - 3700 mm (approx.) - 13 nos. (with 150 mm spacing) as required with positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as required for the high mast considering The safe soil bearing capacity at site as 10T/sqm at 2mts. Depth with all material i/c 4Nos S.P MCB,63Amp.DPIsolator etc as reqd. Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS.
16	122.2.30.a:SITC of 150W LED Flood Light luminaire fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd with IP 66 protection (a) Total system wattage =150 watt +/- 5% (b) Luminaire Efficacy>=100 Lm/w (c) Power Factor>=0.95 (d) Protection Class- IP-66
17	122.2.25:Providing and fixing of Stainless steel name plate of size 6×8 sq inch made of 20 gauge sheet including engraved name of area representative duly painted along with SS clamp nut bolt etc as required
18	110.10:Providing and fiving name board made of MS Sheet 90x60cm, 1mm thick with frame of MS angle 50x50x6mm, two diagonal braces at the back of the sheet of MS flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in CC block 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction of Engineer-in-Charge