Ministry Of Road Transport And Highways has published Tender For Short Term Maintenance Work Between Km. 459/500 To 483/500 Of Nh 56 Devaliya Rajpipla Section In The State Of Gujarat.. Submission Date for this Tender is 29-09-2023. Road Repair Tenders in bharuch Gujarat. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Item Description |
2 | Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.) (i) By Manual Means; A. In area of light jungle |
3 | Providing, Laying and compacting Granular Sub Base(GSB)withapprovedmaterialscompleteas per TechnicalSpecificationsClause401conforming to Table400-1asperapprovalof Engineer-in-Charge. (for grading-iii material) |
4 | Providing, laying and compacting Wet Mix Macadam (WMM) base course with approved materials complete asperTechnicalSpecificationsClauseno.406of MoRTH & asperapprovalof Engineer-in-Charge. |
5 | Providing,layingandcompactingDenseGraded BituminousMacadamcompleteaspertechnical SpecificationClauseno.505includingtackcoatas per Technical Specifications Clause no.503 using VG 40 grade bitumen) [For Grade-II, bitumen@4.5% rate] |
6 | Providing,layingandcompactingBituminous ConcreteaspertechnicalSpecificationClauseno. 507 including tack coat as per Technical Specifications Clause no. 503 using VG 40 grade bitumen) [For Grade-II, bitumen@5.4% rate] |
7 | Slurry Seal Providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface) (iii) upto 1.5 mm thickness |
8 | Slurry Seal Providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface) (ii) 1.5 to 3.0 mm thickness |
9 | Slurry Seal : Providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface) (i) 3.0 to 5.0 mm thickness |
10 | Fog Seal : Providing and applying low viscosity bitumen emulsion forsealingcrackslessthen3mmwideorincipient frettingordisintegrationinanexistingbitumenous surfacing complete as per MoRTH Specificaions Clause 3004.3.2 and as per direction of the Engineer- in-Charge |
11 | Hire charges for JCB machine for removal of Earth, debris, trees, plants, advertisement hoarding… etc. comp. including charges of driver, helper, fuel, oil etc. Completed. |
12 | Hire charges for Hydraulic Excavator / Hitachi or equivalentmachine / Crawler Mounted Excavator (Bucket Capacity > 1.0 cum) for removal of Earth, debris, trees, plants, advertisement hoarding and other civil work etc. comp. including charges of operators, POL etc. |
13 | Hire charges for tractor with trolly / blade on front and cultivator on back including Diesel, oil, operator, helperetc. comp. for earth work, carriage, removal of debris etc. |
14 | Supplying labour per day at site of work for different type of work as directed (with tools and plants) |
15 | Bituminous Cold Mix ( Including Gravel Emulsion) (Providing, laying and rolling of bituminous cold mix on prepared base consisting of a mixture of unheated mineral aggregate and emulsified or cutback bitumen, including mixing in a plant of suitable type and capacity, transporting, laying, compacting and finishing to specified grades and levels.) (i) Using bitumen emulsion and 9.5 mm or 13.2 mm nominal size aggregate |
16 | Filling Pot- holes and Patch Repairs with - Bituminous concrete, 40mm. ( Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2) (II) for grading II Material |
17 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. |
18 | Back filling behind abutment,wing wall and return wall complete as per drawing and Technical specification (A) Granular Material |
19 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) |
20 | Supply & fixing cats eye (Stimsonite) made out Acrilo beautile sterine injuction high compressed molding with reflector made of MMC prismatic type size 12cms. x 6cms x 2.5cms. Provided with bituminous adhesive 100gms with each unit for fixing. |
21 | Retro- reflectorised Traffic signs (Route Marker Sign/Chevron Board:) (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) (xi) 60 cm x 50 cm rectangular |
22 | Hazard Marker Sign : Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) |
23 | Retro- reflectorised Traffic signs (Cautionary / Warning sign:) (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) (iv) 60 cm equilateral triangle |
24 | Retro- reflectorised Traffic signs (Speed Limit sign:) (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) (viii) 60 cm circular |
25 | Retro- reflectorised Traffic signs (Village Name Board/Accident Prone Zone sign:) (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) (ix) 90 cm x 75 cm rectangular |
26 | Supplying & fixing jumbo bollard sign L-type made out of 1.5 mm thick C.R.C. sheet height 155cms. Bottom diameter 30cms. Top diameter18cms. Fabricated as per attacged drawing, pretreated with phospheting process painted with epoxy coatings,Reflectorised with sheetings specified by M.O.S.T. latest specification. (Engineer grade). |
27 | Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) (i) 5th kilometre stone (precast) |
28 | Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) (ii) Ordinary Kilometer stone (Precast) |
29 | Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) (iii) Hectometer stone (Precast) |
30 | Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408). |
31 | Maintenance of Hedge for one year ( maintenace for remaining DLP period). |
32 | Clearing Grass and Removal of Rubbish |
33 | Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) |
34 | Painting and printing letters on kilometer stone 3-coats with synthetic enamel paint. (i)Ordinary Kilometer stone |
35 | Painting and printing letters on kilometer stone 3-coats with synthetic enamel paint. (iii)5th Kilometer stone. |
36 | Cleaning the existing black topped surface with shovel, brooms, etc. and disposing off the collected dirt/dustup to 100 metre away as directed by engineer-in-chargesetc. complete. |
37 | Rumble Strips (Providing rumble strips covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide at ocations sugeested by authority to control speed, marked with white strips of road marking paint.Nos. and spacing as directed by Engineer incharge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail