Indian Institute Of Technology-IITB has published Tender For Aluminium Partition Work At Super Academic Block Of Iit Ropar. Submission Date for this Tender is 06-10-2023. Aluminium Furniture Tenders in Rupnagar Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | For shutter of doors, windows & ventilators including providing and fixing hinges. pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (Fittings shall be paid for separately) |
| 2 | Powder coated aluminium (minimum thickness of powder ocating 50 micron) |
| 3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neorene gasket etc complete as per the architecutral drawings and the directions of Enginner in-charge. (Cost of aluminium snap beading shall be paid in basic items. |
| 4 | With float glass panes of 5.00mm thickness (weight not less that 12.5 kg/sqm) |
| 5 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 6 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80kgand door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. Complete |
| 7 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. |
| 8 | 250 * 16mm |
| 9 | Providing and fixing aluminum tower bolts ISI marked anodised (anodic coaing not less than grade AC 10 as per IS : 1868) tranpaent or dyed to required colour or shade with necessary screws etc. complete: |
| 10 | 250 * 10mm |
| 11 | Providing and fixing aluminium handing floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transpared or dyed to required colour and shade with necessary screws. Complete. |
| 12 | Twin rubber stopper |
| 13 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 14 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 15 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge. |
| 16 | Pre-laminated particle board with decorative lamination on both sides |
| 17 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 18 | 10 x 80 mm |
| 19 | 10 x 120 mm |
| 20 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c ixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of ngineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 21 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 22 | Providing and fixing film on glass door frame as per direction of Engineer In-charge. Make : Garware or equivalent |
| 23 | Sliding roller for making sliding arrangement of aluminium doors |
| 24 | Installation of Dismantled Aluminium sections including labour and all necessary screws, fittings required all complete as directed by Engineer-in-charge. |
| 25 | Installation of Dismantled float glass including cutting to required size,fixing all labour and all necessary screws, fittings required all complete as directed by Engineer-in-charge. |
| 26 | Installation of Dismantled particle board including cutting to required size,fixing, labour and all necessary screws, fittings required all complete as directed by Engineer-in-charge. |
| 27 | Providing and fixing Dark film on glass including cost of cutting, adhesive , labour etc all complete. At all heights all complete as directed by engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
