Tender For Special Repair And Augmentation Of Water Supply Scheme Of Assam Rifles Battalion At Chieswema
Tender Value
1.04 Crore
Estimated cost
Bid Submission
12 Oct 2023
0 days left
EMD
2.08 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Zunheboto → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair And Augmentation Of Water Supply Scheme Of Assam Rifles Battalion At Chieswema
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART-I (SITE DEVELOPMENT WORKS) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 3 | SCHEDULE ‘A’ PART-II (RETAINING WALL) |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size). |
| 7 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 8 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 9 | Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering complete.:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering complete.:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 11 | Supply and stacking site : 90 mm to 45 mm size stone aggregate (Hard core filling at back side of weep hole). |
| 12 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :Raised and cut pointing |
| 13 | Providing and fixingPolyvinyl Chloride (PVC) pipes, 75 mm nominal outer dia Pipes for weep holes. |
| 14 | SCHEDULE ‘A’ PART-III (PUMP HOUSE) BUILDING WORKS |
| 15 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 17 | Brick work withcommon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars |
| 20 | Supply and stacking site : 90 mm to 45 mm size stone aggregate (Hard core filling at back side of weep hole) |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 22 | Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood. |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Kiln seasoned and chemically treated hollockwood35 mm thick shutters. |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood35 mm thick |
| 27 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 28 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 29 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 25 mm thick sqm |
| 30 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster |
| 31 | Cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand). |
| 32 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand and manufacture |
| 33 | Colour washing such as green, blue or buff to give an even shade :New work (two or more coats) with a base coat of white washing with lime. |
| 34 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm |
| 35 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 36 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 37 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm |
| 38 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 39 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. |
| 40 | SCHEDULE ‘A’ PART-IV (INTERNAL ELECTRIFICATION OF PUMP HOUSE) |
| 41 | Providing and fixing 50 mm dia X 3.2 metres G.I. pipe (including accessories) complete with 50 mm X 50 mm X 6 mm angle iron bracket on wall and 75 mm X 90 mm shackle insulator with straps for house service connection including painting the angle and flat iron with primer and finish paint etc. as required. |
| 42 | Supplying and fixing of10 x 4 sq. mm of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 43 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 44 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch |
| 45 | Supplying and fixing 3 pin 5/6 amp socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 46 | Supplying and fixing 6 pin 15/16 amp socket outletmodular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 47 | Supplying and fixing brass batten/ angle holder including connection etc. as required. Each |
| 48 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.(free for fixing) LED tube light and fittings issued by Dept. |
| 49 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 50 | Installation, testing and commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, earthing the regulator etc. as required. |
| 51 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 52 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 53 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. For 8 way, Double door SPN MCBDB |
| 54 | SCHEDULE ‘A’ PART-V (FILTERATION PLANT INCL CONNECTING WORKS) |
| 55 | Supply, Installation, Testing and Commissioning of Iron Removal plant of 5000 GPH capacity complete unit with following specifications :-(a) MS Vessel fabricated of 6 mm thick MS Sheet of 1500 mm dia x 1800 mm height cylindrical vertical shell with top and bottom man holes built in up with top and bottom strainers inside painted with food grade epoxy paint of approved quality suitable for drinking water inside and outside with anticorrosive weather proof paint.(b) Pipe line and valves: up to 75 mm dia pipes line confirming to IS specifications fitted with inlets and outlet and regeneration control butterfly valves sampling cocks etc as per site requirement.(c) Brine (Salt tank) of 2000 ltr capacity with salt for one time charge.(d) Filtering element: Quartz ball and Ion Exchange Resin 02 Tons approximately. Necessary fdn base with add/altn in existing scheme of arrangement all as per site requirement and as per directions of Engr-In- Charge. (Make : Aqua Solution or equivalent) |
| 56 | Only material and labour for laying of 40 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. Free for fixing(GI Pipes issued by Dept). |
| 57 | Taking down includingproviding and fixing of 75 mm G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete. |
| 58 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 75 mm nominal bore. |
| 59 | Providing and fixing of 40 mm nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. 40 mm nominal bore |
| 60 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore each |
| 61 | Providing and fixing of 75 mm GI Elbow. (Make Tata, Jindal, Kalinga or equivalent). |
| 62 | Providing and fixing of GI Nipple double threaded 75 mm dia and 300 mm long (Make : Tata, Jindal, Kalinga or equivalent) |
| 63 | Providing and fixing of GI Nipple 40 mm (Make : Tata, Jindal, Kalinga or equivalent). |
| 64 | Providing and fixing of GI reducer Tee 40/75 mm. |
| 65 | Providing and fixing of GI Bend 40 mm |
| 66 | Providing and fixing of GI Elbow 40 mm |
| 67 | Supply and fixing of 5 HP 3 Phase water pump Model : 527++ or 520++ including DOL starter and by pass arrangement of connecting pipe all electrical and plumbig and pump mounting complete. |
| 68 | Providing bypass arrangement for connecting of 5 HP 3 Phase motor complete incl necessary welding works etc all as specified and directed by EIC |
| 69 | SCHEDULE ‘A’ PART-VI (45 KL SFMC TANK) |
| 70 | M/L constr of 45 KL SFMC Tanks incl all schedule finishes with all specification incl fdn as per OEM instr and confirming to Drawing No.5 Sect/Engr/525 Sheet No.1/1 all as specified and directed by E-I-C.(Make : Sintex or equivalent) |
AI Tender Summary
Tender Timeline
Sep 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender