Construction Of Rcc 2-Storied Police Station Building With Provision Of Conference Hall With Cyber Room & Work Station & Women Cell & Counseling Room For Drug Adict & Juvenile, Rcc Ground Floor Barrack, Boundary Wall, Gate, Approach Road Etc. In Existing
Tender Value
45.82 Lakhs
Estimated cost
Bid Submission
31 Oct 2023
0 days left
EMD
91650
Bank guarantee accepted
Document Fee
916
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sadiya → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Rcc 2-Storied Police Station Building With Provision Of Conference Hall With Cyber Room & Work Station & Women Cell & Counseling Room For Drug Adict & Juvenile, Rcc Ground Floor Barrack, Boundary Wall, Gate, Approach Road Etc. In Existing Police Station At Sadiya P.S. In Tinsukia District Under Moitri Scheme ( Green Field ) ( Balance Work )
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods inreturn filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directedand specified in the following classification of soils including bailing out water where necessary as directedand specified. I. By Manual Means A Up to a depth of 2.00m below the existing ground level. (a)In ordinary soil |
| 2 | Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete.(a) Brick on flat soling. |
| 3 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city only |
| 4 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footingsteps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete(shuttering where necessary shall be measured andpaid separately).(i)In prop 1 cement: 3 sand :6 coarse aggregate by volume |
| 5 | Brick work in cement morter with 1st class brick including raking out joints and curing complete as directed.A.In Sub-structure upto plinth level including dewatering if necessary(c)In proportion 1:5 (1 cement:5 sand) |
| 6 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering,ramming etc. complete as directed and specifiedincluding payment of land compensation, forest royalty,sales tax and other duties and taxes as may benecessary. (C)With river sand or silt (predominantly non plastic) bytruck carriage including loading and unloading. |
| 7 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering,strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (ii)Using 25mm thick plank |
| 8 | Sides of tie beams, grade beams etc. at or below groundlevel. (b)Using 25mm thick plank |
| 9 | Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like. |
| 10 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face |
| 11 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. |
| 12 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. |
| 13 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. |
| 14 | Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc. |
| 15 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Without using admixture, plasticiser Using Mixer Machine (I)In substructure up to plinth level A Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls ofseptic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. b) M20 grade concrete or Prop. 1:1.5:3 |
| 16 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using Mixer Machine (II)In super structure from plinth level up to 1st floorlevel ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.N) Without using admixture, plasticiser. b) M20 grade concrete or Prop. 1:1.5:3 |
| 17 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B.walling including straightening, cleaning, cutting and bending to proper shapes and length as per details,supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete upto 1st floor level Note :- lap length for reinforecement bars (25mm or above)will be measured and paid separately. a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINLreinforcement bar of Fe-500 N/mm2(For Assam Type Bldg., drain works, boundary wall etc).(ii) Super Ductile (SD) TMT reinforcement bars |
| 18 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick |
| 19 | Brick nogged wall in cement mortar with 1st class brick including raking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b)In cement mortar in proportion 1:5.(1 cement:5 sand) |
| 20 | Cement plaster skirting with cement mortar in prop. 1:3(1 cement : 3 coarse sand) finished with a floating coatof neat cement including rounding of junctions with floor. (a) 15 mm thick |
| 21 | 15 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side c)In cement mortar 1:5 |
| 22 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises orrounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.b) In cement mortar 1:4 |
| 23 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panelsincluding curing complete as directed.(a) 15 mm thick |
| 24 | 65 mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop. 1:3:6(1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per squaremetre of floor area) including curing etc. complete as directed. |
| 25 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.( Johnson, Orient Bell, Nitco, AGL, Somany, Vermora make) (A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made:Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate |
| 26 | Providing ceramic wall tiles of approved quality, size,shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop.1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile(Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).a) Normal rangeSomany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above |
| 27 | Providing and laying damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. a)25 mm thick damp proof course |
| 28 | Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) |
| 29 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately).(a) 35mm thick |
| 30 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. |
| 31 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire withnecessary shuttering , curing etc. completeincluding fixing in position as directed. b) 75mm thick slab |
| 32 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. |
| 33 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). |
| 34 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core.(iii) 30 mm thick . |
| 35 | Providing, fitting and fixing steel windows/ ventilators (openable) of standard rolled steel sections as per relevant I.S. Code-1038 joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device and steel handles, peg stays of 300mm long etc. complete as per drawing including applying a priming coat of red-lead paint. |
| 36 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flawsand other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished )a) Sliding door bolts(i)300mm x 16mm |
| 37 | b) Tower bolts i) 300mm x 12mm |
| 38 | c)Door handles ii) 100mm |
| 39 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick |
| 40 | DISTEMPERING: g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wallsurfaceto givean evenshade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. |
| 41 | DISTEMPERING:c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 42 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 43 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) |
| 44 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface bythroughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white). |
| 45 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 46 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint ofapproved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac/ DUCO paints) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.i) Surfaces over 100mm in width or girth. (a) General purpose (Asian paint /Berger paint /ICI paint/J&N paint/Nerolac) |
| 47 | Providingfitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White i) Parryware make |
| 48 | Supplying, fiting and fixing PVC flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)i) Parryware make a) White (i)Economy Single Flush (Cat No.C8090/C8055) |
| 49 | Providing fitting & fixingstainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipeetc. complete includingpainting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (ii) Single Bowl with Drain Board (400 x 200) Flat Edge - Glossy (Cat.No.C8537) |
| 50 | PEDESTAL BASIN (with pedestal) (A) Parryware Make (a) White(iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380) |
| 51 | Supplying fitting and fixing chrome plated (C.P.) stopcock of approved brand and size as mentioned belowas directed and specified.(G.I. & C.P pipes will be measured and paid separately)(IV)Sona brand (a) 15mm dia Stop cock male-female /Angle stop cock |
| 52 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipeswill be measured separately) (VI) Sona brand (i) Bib Cock ( Code.No.RG-5015) |
| 53 | Supplying and fitting fixing C.P. pillar cock of 15mm diaof approved brand as specified and directed. (I)SONA make (b) Heavy type |
| 54 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (b) Sona (ii) Rupa 40mm (HT/ FT) (Cat.No.WS-0801) |
| 55 | Providing, fitting and fixing Chrome Plated towel ringcomplete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) |
| 56 | TOWEL RAIL,TOWEL RACK & TOWEL RING: Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (i) Towel rail Diplomat 300mm long (Cat.No.TR-0605) |
| 57 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. |
| 58 | Supplying fitting and fixing Chrome Plated (C.P.)shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) (I)Essco make (a) Casted shower arm heavy 190mm long with wall flange |
| 59 | COWEL: Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make |
| 60 | CP grating (iii) 75mm dia |
| 61 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary completeat all levels including below G.L as directed and specified a) In exposed surfaces or in trenches. (ii) 110mm dia. |
| 62 | (iv) 75 mm dia. |
| 63 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary completeat all levels including below G.L. as directed and specified.a) In exposed surfaces or in trenches. (ii) 110mm dia. |
| 64 | (iv) 75 mm dia. |
| 65 | Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (iv) 110 mm x 75mm |
| 66 | Supplyingand fixingChlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes. (A)Exposed or in trenches (c) 25 mm nominial OD inlet |
| 67 | (b) 20 mm nominial OD |
| 68 | (B) Concealed pipe with cutting chases & making good the walls. (a) 15 mm nominial OD |
| 69 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia |
| 70 | (iv) 75mm dia. |
| 71 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. iv) Bore hole of 150mm diameter |
| 72 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.II)PVC PIPESUPREME /PRINCE / FUSION /SFMC Brand v) 110mm diameter |
| 73 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.B) PVC PIPE SUPREME / PRINCE / FUSION /SFMC Brand ii) 32mm diameter |
| 74 | Supplyingfitting and fixing ISI approved PVC filter 3.00 metre long. iv) 100mm diameter |
| 75 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained |
| 76 | Flushing, clearing, washing and watering of the tube well |
| 77 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipesI) 2000 Lt capacity (b)Polycon make |
| 78 | Maintenance Legacy (Civil work only)2nd Year Area: RCC 2 storied PS Building and RCC GF Barrack 3.15 M height, Ground Floor |
| 79 | Maintenance Legacy (Civil work only)2nd Year Area: RCC 2 storied PS Building and RCC GF Barrack 3.15 M height, 1st Floor |
| 80 | Maintenance Legacy (Civil work only)3rd Year Area: RCC 2 storied PS Building and RCC GF Barrack 3.15 M height, Ground Floor |
| 81 | Maintenance Legacy (Civil work only)3rd Year Area: RCC 2 storied PS Building and RCC GF Barrack 3.15 M height, 1st Floor |
AI Tender Summary
Tender Timeline
Sep 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender