Military Engineer Services-MES has published Tender For Certain Repair / Maintenance Of Lt Panel, Fidder Pillar, Street And Solar Light And External Water Supply Installation, Pumps, Gi/Ci Pipes, Electric Motor And Allied Works At Nausena Bagh And Nofra Under Ge Navy Porbandar. Submission Date for this Tender is 13-10-2023. Electrification Work Tenders in porbandar Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M & L for servicingandoverhaulving of ACB upto 1600 Amps Capacity including allconsumables maintainance kit and required minor partsincluding dismantling the old cable lugs of any size by cutting the cable including fixing of new lugs by pealing the cable all as specified and directed by Engineer in Charge. |
| 2 | S & Fin repairs Digital LT voltmeter with selector switch of size 96x 96mm rating 0 to 500 volt all as specified and directed. |
| 3 | S&F in repairs Digital LT Ammeter with selector switch of size 96x 96mm suitable for CT ratio 5amp, progaramable type andall as specified and directed. |
| 4 | S&F Trip rod of ACB all as specified and directed. |
| 5 | S&F Trip Latch of ACB all as specified and directed. |
| 6 | S&F Door interlock of ACB all as specified and directed. |
| 7 | S&F Closing coil DC Adaption kit of ACB all as specified and directed. |
| 8 | S&F pole connector kit of ACB all as specified and directed. |
| 9 | Supply and laying of Stone aggregate of size 40 mm to 100 mm and laid in 4 pole structure and two pole structure including cleaning bushes from grass root and making good surface before laying of stone aggregate complete all as directed by Engg-in-charge |
| 10 | M & L for Hot press moulded SMC junction box 240mm x 130mm x 95mm (inside dimension) fixed with left side hinges and cable terminals with bus bar andone number 6 Amp SP MCB fixed to pole with clamp nuts,bolts etc complete all as specified anddirected by Engineer-in-charge. |
| 11 | Supply and fixing cable jointing STRAIGHT THROUGH JOINTfor 1100V grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5core XLPE armoured, alluminum conductor cable of size 120 to 185 sq mm and all as directed by Engineer-In-Charge. |
| 12 | Supply and fixing cable jointing STRAIGHT THROUGH JOINTfor 1100V grade cable for straight through joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3.5core XLPE armoured, alluminum conductor cable of size 240 to 400 sq mm and all as directed by Engineer-In-Charge. |
| 13 | M & L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size |
| 14 | M & L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT , 25 x 20 cm size |
| 15 | M & L for PCC concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in mass concrete / foundation of pole including necessary use and waste of form work complete all as specified and directed. |
| 16 | M & L for PCC concrete 1:5:10 type E2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete or as in sub base complete all as specified and directed. |
| 17 | M & L for PCC concrete 1:3:6 type C1 using 20 mm graded stone for coping of poles complete all as specified and directed. |
| 18 | Taking down the High Mast light of any hightincluding bracket by the means of crane and reinstallation to site after repairing work with help of high-capacity Hydraulic crane. |
| 19 | M & L for replacement of old rusted pulley assembly of specified dimensions at top and bottom, the material for pulley must be anti-corrosive |
| 20 | M& L for replacement of stainless steelwire rope of 6 to 8 mm dia and strands for lifting up Light bracket all as directed by Engg-in-charge. |
| 21 | M& L for complete rewinding of Electrical motor upto1-2 HP capacity including changing bushes bearings etc. of all required accessories |
| 22 | M&L for replacement flood Lights holding bracket for hight mast light of any tpe of High mast including all fitting accessories |
| 23 | M & L for painting oftwopole strucure including of 11 mtr HT electric tubular/ PCC pole with two coat of off white distemper colour after cleaning, scraping and all iron structure by silver colour complete by skilled painter with markingall as directed and specified |
| 24 | Street light fitting bracket, 1.5 mtr long made of galvanized iron pipe of 32/40 mm bore light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint fixed in repair / replacement complete all as specified and directed. |
| 25 | Supply and fix in Replacement of Prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and 102mm x 279mm at bottom,class 10 including removing old PCC pole all as specified and directed by Engr-in-charge. |
| 26 | Supply and fixing LED street light fitting 70/72 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-charge. |
| 27 | Supply, laying and fix in Repair/ Replacement of Cable laid in trenches, passing through pipes and fixed on wall/floor/ceiling with proper saddles, including testing of XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 11000 Volts grade with stranded aluminium conductor of following size 95 sq mm 3 core.Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid separately under respective items. |
| 28 | Supply, laying and fix in repair / replacement of LT Cable laid in trenches, passing through pipes and fixed on wall/floor/ceiling with proper saddles , including testing of XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following size 10 sq mm 4 core.Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid separately under respective items. |
| 29 | All as per item No. 29.00 above but of size 16 sq mm X 4 core |
| 30 | All as per item No. 29.00 above but of size 25 sq mm X 3.5 core |
| 31 | All as per item No. 29.00 above but of size 35 sq mm X 3.5 core |
| 32 | All as per item No. 29.00 above but of size 50 sq mm X 3.5 core |
| 33 | All as per item No. 29.00 above but of size 70 sq mm X 3.5 core |
| 34 | All as per item No. 29.00 above but of size 120 sq mm X 3.5 core |
| 35 | S & F of GI Tubing light grade 50 mm for cable protection, laid under plinths / floors / roads / culverts or fixed on walls or concealed in walls or along the steel poles by means of M.S.F.I clamps with necessary bolts nuts washers etc complete all as specified. |
| 36 | S & F of GI Tubing light grade 80mm for cable protection, laid under plinths / floors / roads / culverts or fixed on walls or concealed in walls or along the steel poles by means of M.S.F.I clamps with necessary bolts nuts washers etc complete all as specified. |
| 37 | M & L for Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth including taking down old cable all as specified & directed in Hard/dense soil complete all as specified and directed. |
| 38 | M & L for Returning filling in including spreading, levelling, watering and well ramming in layers not exc. 25 cm in thick all as specified and directed. |
| 39 | M & L for Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified by the Engineer-in-charge. |
| 40 | Supply and laying un-reinforced precast concrete cable cover Class LV type I, size 250 x 150 x 40mm |
| 41 | M&L for dry sand cushioning to under ground cable intrenches including spreading, levelling and hand punning complete all as specified. |
| 42 | M & L for cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor of cable size 95 sqmm complete all as specified. |
| 43 | M & L for servicing of LT panel including dismantling the old cable lugs of any size by cutting the cable including fixing of new lugs by pealing the cable, cutting and jointing the cables with the help of Cable Joint Kit of suitable size if required, servicing of MCCBs/MCBs/Bush Bar/ Checking/Replacing of Nut Bolts etc. cleaning of all joint make joint Carbon free and remove rusted part by chemicals all as specified and directed by Engineer in Charge. Note: i) The items i.e. MCCBs/MCBs, Cable Joint Kit of suitable size shall be measured and paid seperately under various item. ii) The material and labour required for servicing of LT panel i.e consumables/nut bolts etc shall be deemed to be included in the item rate. |
| 44 | Preparation of surface of LT pole i.e. scrapping by brushes, emery paper, caustic soda etc of LT pole 9m/11m long PCC or steel tubular with all connected channel, cross arms caps etc painting one coat of aluminium paint over a coat of anti rusted paint as a primer on steel surfaces and One coat of primer and two coat ofexterior acrylic emulsion paint (wheather coat) on Concrete surfaces and silver colour on steel surfaceincluding numbering by using white paint over a surface of black paint base of size 15cm x 15cm complete all as specified and as directed by Engineer-in-Charge. |
| 45 | M & L for Anti-climbing device spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole all as specified and directed by Engr-in-charge. |
| 46 | M & L for Repairs to street light fitting by replacing complete unserviceable Driver of capacity 70-150 Watt, LEDs lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection packingcomplete all as specified and directed by Engr-in-charge. |
| 47 | Supply, laying & testing PVC insulated, round PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm 3 core 1100 volts gradefor street light connections complete all as specified and directed. |
| 48 | Supply and fix in replacement in repair 11000V outdoor gang operated air break switch12 insulator mechanically operated mouted on insulator and steel frame, with operating mechanism worked from ground level for current ratings upto 400 Amps for 11000 volts including Expulsion fuse (DO fuse) unit with 2 pole structure of 09/11 mtr PCC Pole consisting of PCC Pole with anti climbing device, PCC foundation & cross arms, cross arms ,bracings ,supports,clamps and back plates fabricated from structurl steel sections includoing nuts bolts washers,welding,bending cold or hot ,drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat , one under coat and one finishing coat of paint complete all as specified and directed by Engr-in-charge. |
| 49 | M & L in replacement for FIRE FIGHTING POINT at electric installations made out of brick masnory foundation of specified size with iron angle and MS sheet strucure of specified diamentions duly painted with red oil bond colour andwriiten of FIRE POINT by white colour includding 2 fire bucket and 3 Fire extingusher chemicals ABC powdertype 5-6kg , Co2 type 6 kg, Fire ball of suitable capacity etc. all as specified and directed by Engg-in -charge |
| 50 | S & F in replacement ofLightning arresters expulsion type complete with all fittings, 30 kilo amp discharge capacity, distribution class all as specified and directed by Engg-in -charge |
| 51 | S & F in replacement of Single dome LED aviation obstruction light comprising of aluminium housing with polycarbonate enclosure with accessories, Complete all as specified and as directed. Make Bajaj/ Crompton or eqivalent. |
| 52 | S & F in replacement ofLED flood light 350W , with powder coated pressure die cast aluminium housingpowder coated andtoughened glass clear glass fixed with SS screw, with secondary lens optics with LED having luminaire efficacy of 130 lm/W. Total of 26,000 Lums +/- 10%. Provided with built in surge protection 5kv and external surge protection of 10kv, having Ingress protection Ip66 complete all as specified and directed. Model:- Crompton/ Havells/HPL |
| 53 | M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, connected to galvanised iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 54 | M & L for Earthing continuity galvanised iron strip 32 x 6 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situationfor loop earthing etc as required all as specified and directed by Engr-in-Charge. |
| 55 | M & L for Earthing continuity galvanised iron strip 25 x 4 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situationfor loop earthing etc as required all as specified and directed by Engr-in-Charge. |
| 56 | S & F of Air termination, single pointed copper rod 12mm dia and 300mm long |
| 57 | S & F of Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw |
| 58 | Supply and fixing in repair MCCB, AC 415 V, 50 HZ, fixed type, capacity 200 Amps, 3/4 Pole, 18/36 KA, suitable to be fixed inLT panel complete all as specified and directed. |
| 59 | All as per item No. 59above but of capaqcity 160 amps 18/36 KA. |
| 60 | All as per item No. 59 above but of capaqcity 125 amps 16 KA. |
| 61 | Supply and fix Contactors for change over switch 400 Amps for DG set of Capacity 250 KVA capacity ,AC3,415V,50/60HZMake : Havells, Legrand or equivalent |
| 62 | Material and labour for periodical cleaning of underground sump/Over Head tank by bailing out the remaining water after pumping by arranging re-watering pumps orby manual and wash the walls & bottom surface by high pressure spray of approximating 195 PSI with rotary water jet pumps and removing thesludge and foreign matters complete by and socking out the fixing with high pressure wet vacuumpumps scrubbing the wall and cleaning the entire sump including disinfectioning the tanks with spray of chemical approach by concerned authorities and painting two coat of white lime wash complete all as directed by the Engineer-in-Charge of following capacity :- |
| 63 | (a) 4.0 Lakh ltr capacity |
| 64 | (b) Upto 2.0 Lakh ltr capacity |
| 65 | M & L for periodical servicing of electric driven pumpsets disconnecting the electric connection from motor terminal box including insulating the ends of the cable, taking out the pump set from base after opening nuts/bolts, transporting from site to workshop, dismantling pump, removing worn out impeller, ball bearing, gaskets, assembling the pump with replacement of minor parts as required such as pulley key, gland packing rope, greasing etc., transporting back to site and fixing on the existing foundation, connecting the electric connection of motor and testing complete to entire satisfaction of Engr-in-charge for the following capacity. (Note :- Major spare parts shall be measured and paid separately, minor spares deemed to be in rate quoted, spares like pump shaft, impeller and bearing only will be measured and paid separately under relevant items ) |
| 66 | a) Centrifugal pump set of capacity 30HP (any make) |
| 67 | b) Centrifugal pump set of capacity 12.5/10 HP (any make) |
| 68 | c) Centrifugal/Submersible pump set of capacity7.5/5 HP (any make) |
| 69 | d) Centrifugal/Submersible pump set of capacity2/3 HP (any make) |
| 70 | Supply only Bearing for Motor capacity 30 hp complete all as specified and directed by Engr-in-charge. Note :- Labour charges are included in above item No. 64.00. |
| 71 | Supply only Bearing for Motor capacity 12.5/10 hpcomplete all as specified and directed by Engr-in-charge. Note :- Labour charges are included in above item No. 64.00. |
| 72 | Supply onlyGun metal bush suitable for motor capacity 12/15 hp complete all as specified and directed by Engr-in-charge. Note :- Labour charges are included in above item No. 64.00. |
| 73 | Supply onlyGun metal bush suitable for motor capacity 30 hp complete all as specified and directed by Engr-in-charge. Note :- Labour charges are included in above item No. 64.00. |
| 74 | Supply only power transmitting shaft and coupler for Motor and pumpsets of capacity 30 hp complete all as specified and directed by Engr-in-charge |
| 75 | Supply only power transmitting shaft and coupler for Motor and pumpsets of capacity 12.5/10 hp complete all as specified and directed by Engr-in-charge |
| 76 | Material and labour for rewinding the electric motor of capacity 5 HP to 7.5 HP capacity, disconnecting the electric connection of motors, earth connections, decoupling motor and pump, removing foundation nuts/bolts and removing the motors from its existing position to workshop (Note : following work are to be deemed in rate quoted). |
| 77 | (a)Removing the split case/body cover of motor, separate stator/rotor and cutting the complete burnt/defective copper winding. (b)Cleaning the stator body complete by rubbing sand paper remove all carbons. (c)Insert insulating materials such as insulating paper sleeves. (d)Rewinding the stator with existing size of super enameled copper winding, varnishing and heating up at desired temp. For achieve the particular Ohm resistance. (e)Clean the rotor and assembling in motor. (f) Connection/coupling the motor with pump, connect all electric/earth connection foundation nuts/bolts at its original position and testing on load complete all as specified and directed. |
| 78 | All as per item No. 70.00 above but 12.5/10HP motor. |
| 79 | All as per item No. 70.00 above but 30.0 HP motor. |
| 80 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm nominal cross section, 3 corein service connections all as specified and directed by Enge-in charge.Make : Aquafit or eqivalent |
| 81 | M & L for providing water tapping connections from existing line of size 80 mm to 200 mm DI/GI pipe line including taking up old connections, including required tapping ring and clamps of 80 mm to 200 mm size & suitable length pipeline all as specified and directed by Enge-in charge. |
| 82 | Repair to Chlorination dosing plant consist of dosing pumpsets induction motor of 220 volts, single phase, 120 Watt and 960 RMP - 02 Nos, stirrer assembly including replacement of striring rod, blade, Storage drum of capacity 100 Ltr - 01 Nos & Mixing Drum of capacity 500 Ltr - 01 Nos, injection nozzle of suitble size. |
| 83 | S & F rubber couplerbetween Motor and Pumpset shaft all inclusive of dismentalling shaft, checking level motor and pump shaft by level meter before fitting couplerfor 7.5 HP to 30 HP capacity centrifugal motor Pumpsets. |
| 84 | M& L for repair work of main DI/GI/UPVCpipe line of 25 mm dia to 200 mm dia size by cutting of pipe, Threading of GI pipe,jointing kit, sockets, unions GI/UPVC of suitable size, clamps etc. The job included cutting of pipe line and provision of required lengh pipe line (upto 1.00 mtr) as requiredand jointing accessories etc. |
| 85 | Supply and fixing in repair DOL starter suitable for 1 hp to 2 HP motorcomplete with sheet-steel enclosurecomplete all as directed by the Engineer-in-Charge. |
| 86 | Supply and fixing in repair DOL starter suitable for 3 hp to 5 HP motorcomplete with sheet-steel enclosurecomplete all as directed by the Engineer-in-Charge. |
| 87 | Supply and fixing in repairs star-delta starter suitable for 30 HP motor type MK-1 complete with sheet-steel enclosure, complete all as directed by the Engineer-in-Charge. |
| 88 | Supply and fixing in repairs star-delta starter suitable for 10 HP to 12.5 HP motor type MK-1 complete with sheet-steel enclosure, complete all as directed by the Engineer-in-Charge. |
| 89 | Taking down old GI tubing 80/50/40/25 mm bore medium grade from trenches / wall / floor etc including making good the disturbed surfaces complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply and fix GI tubes medium gradecomplete with all fittings (misc fitting required on site like; union, tee, bend, elbow, reducer, socket deemed to be included in rate)tobe fixed on wall and ceilings or laid in floors/trenches complete of following bore of pipes:- GI tubes medium grade 80 mm dia. |
| 91 | GI tubes medium grade 50 mm dia. |
| 92 | GI tubes medium grade 40 mm dia. |
| 93 | GI tubes medium grade 25 mm dia. |
| 94 | Taking down unserviceable gun metal globe or gate valve of any sizefrom existing location. |
| 95 | S & F Gate valve, with iron/UPVC wheel head screwed both ends for iron/UPVC pipe of 50 mm bore incl provn of union nipples sockets etc. |
| 96 | S & F Gate valve, with iron/UPVC wheel head screwed both ends for iron/UPVC pipe of 40 mm bore incl provn of union nipples sockets etc. |
| 97 | S & F Gate valve, with iron/UPVC wheel head screwed both ends for iron/UPVC pipe of 20 mm bore incl provn of union nipples sockets etc. |
| 98 | Supply & Fixedin replacement CIfoot valve heavy duty 80 mm dia brass with all accessories complete all as specified and directed by Engineer-in-Charge note: Clamps of required size and nut bolts deemed to be included in rate. |
| 99 | Supply & Fixedin replacement CIfoot valve heavy duty 100/150 mm dia brass with all accessories complete all as specified and directed by Engineer-in-Charge note: Clamps of required size and nut bolts deemed to be included in rate. |
| 100 | Material and labour for servicing of the pressure pump including replacement of pressure switch, of given capacityof tarracesingle phase 230 volts capacity, disconnecting the electric connection of motors, and removing the motors from its existing position and sending to workshop for repairs/rewinding complete and refixing the same after repairs complete all as specified and directed by Engr-in-charge. |
| 101 | Servicing of Submersible pump set 3 phase 2/3 HP alongwith dismantaling of HDPE/GI pipe from UG Sump and refixing the same by replacing the wornout winding and rewinding with same size gauge, super enameled copper wire, warnishing, greasing, bearing, nuts, bolts and gland packing, greasing and testing the pump set complete all as directed by Eng-in-charge. |
| 102 | M & L for repairing of cast iron sluice valve 200 mm dia complete with flanged end, gaskets, packing, replacement of threaded shaft with nut assemble and metal diapharm, rotatating wheel, nut and bolts, painting two coat of black colour as per IS 780 including all joints with rubber gasket, bolts, and nuts washer complete all as specified. |
| 103 | M & L for repairing of cast iron sluice valve 150 mm dia complete with flanged end, gaskets, packing, replacement of threaded shaft with nut assemble and metal diapharm, rotatating wheel, nut and bolts, painting two coat of black colour as per IS 780 including all joints with rubber gasket, bolts, and nuts washer complete all as specified. |
| 104 | M & L for repairing of cast iron sluice valve 100 mm dia complete with flanged end, gaskets, packing, replacement of threaded shaft with nut assemble and metal diapharm, rotatating wheel, nut and bolts, painting two coat of black colour as per IS 780 including all joints with rubber gasket, bolts, and nuts washer complete all as specified. |
| 105 | M & L for repairing of cast iron sluice valve 80 mm dia complete with flanged end, gaskets, packing, replacement of threaded shaft with nut assemble and metal diapharm, rotatating wheel, nut and bolts, painting two coat of black colour as per IS 780 including all joints with rubber gasket, bolts, and nuts washer complete all as specified. |
| 106 | Supply and fixing in repair MCCB, AC 415 V, 50 HZ, fixed type, capacity 200 Amps, 4 Pole, 36 KA, suitable to be fixed inLT panel complete all as specified and directed. |
| 107 | Supply and fixing in repair MCCB, AC 415 V, 50 HZ, fixed type, capacity 160 Amps, 4 Pole, 36 KA, suitable to be fixed inLT panel complete all as specified and directed. |
| 108 | Supply and fixing in repair MCCB, AC 415 V, 50 HZ, fixed type, capacity 125 Amps, 4 Pole, 16 KA, suitable to be fixed inLT panel complete all as specified and directed. |
| 109 | Supply and fixing in repair MCCB, AC 415 V, 50 HZ, fixed type, capacity 25 to 100 Amps, 4 Pole, 16 KA, suitable to be fixed inLT panel complete all as specified and directed. |
| 110 | Supply and laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorscomplete all as specified complete with all fittings (like; union, tee, bend, elbow, reducer, socket)tobe fixed on wall and ceilings or laid in floors/trenches complete of 50 mm dia all as specified and directed by EIC. |
| 111 | Supply and laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorscomplete all as specified complete with all fittings (like; union, tee, bend, elbow, reducer, socket)tobe fixed on wall and ceilings or laid in floors/trenches complete of 40 mm dia all as specified and directed by EIC. |
| 112 | M & Lrepairing of non return valve 150 mm dia complete with flanged end, gaskets, packing, replacement of threaded shaft with nut assemble andmetal diapharm , rotatating wheel , nut and bolts, painting two coat of black colour as per IS 780 including all joints with rubber gasket, bolts, and nuts washer complete all as specified of sizes |
| 113 | M & Lrepairing of non return valve 100 mm dia complete with flanged end, gaskets, packing, replacement of threaded shaft with nut assemble andmetal diapharm , rotatating wheel , nut and bolts, painting two coat of black colour as per IS 780 including all joints with rubber gasket, bolts, and nuts washer complete all as specified of sizes |
| 114 | M & L porbandar stone masonary valve chamber of size 0.90 mx 0.90 m X 0.75 m (internal size) and cover including earth work complete all as specified and comprising of the following.(a) 150 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation. (b) Brick work 230 mm thick built in CM 1:4. (c) 15 mm thick rendering in CM (1:4) internally and externally to exposed surface of thick work including 150 mm below ground level. (d) 100 mm thick coping in PCC 1:2:4 type B1 using 20 mm graded stone aggregate. (e) MS covers made out of 50 mm thick MS plate with double hinges, fixed MS angle iron frame made out of MS angle iron 40 x 40 x5 mm thick including 150 mm long hold fast made out of MS flat iron of size 25 x 4 mm embedded in PCC coping MS covers shall be provided with suitable hand grip and suitable locking arrangement. (f) All MS surface shall ,be painted with two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified. |
| 115 | M & L for Replacement of MS cover made outof5mm thick MS sheet with double hinges and suitable handle locking arrengement etc complete fixed to MS angle iron frame made out of 40 x 40 x 5 mm size including 15cm long hold fast of25 x 25 x 4 mm MS feate iron embeded in PCC coping for valve pit cover of various sizenecessary painting blacksynthetic enamelled paintwith 2 coats over red primer. |
| 116 | M & L for painting to water supply tubing any dia after preparation of old painted surface by proper cleaning and then applying two coat of synthetic enamelled paint as per existing colour code or as directed by Engineer-in-Charge. |
| 117 | M & L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvansied iron strip 25 x 4 mm as earth lead by means of bolts, nuts, check nuts and washer os galvanised iron or steel all as shown in electrical platge No. 5 connected to earthing test point all as specified or indicated including testing on completion. |
| 118 | M & L for painting to water supply motar & pump of 30/12.5/10 hp after preparation of old painted surface by proper cleaning and then applying two coat of synthetic enamelled paint as per existing colour code or as directed by Engineer-in-Charge |
| 119 | Supply and fix in repair PVC moulded water storage tank of 1000 Ltrs capacity cylindrical vertical type complete with inlet, outlet, overflow, and wash out connection, closed top cover complete including hoisting in position etc all as specified and directed by Engineer-in-Charge. |
| 120 | S & F of Glowing of sign boards at Pump house of size 6 feet x 3 feet x 1.5 feet aluminium strip box covered with accrelic sheet of suitable size duly stickeredname of pump house of suitable size and colour code inclussive of LED light fitting inside box as specified and directed. |
| 121 | Suply, laying & jointing in tranches DI pipes class K-7 of standard length spigot and socketed end push type self restrained jointwith rubber gasket as jointing material, internal cement morter coating & external surface with butiminous paint 200 mm dia ISI complete all as specified and all as directed Engr-in-charge. all fixing ccessories deemed to included in rate. |
| 122 | Suply, laying & jointing in tranches DI pipes class K-7 of standard length spigot and socketed end push type self restrained jointwith rubber gasket as jointing material, internal cement morter coating & external surface with butiminous paint 150 mm dia ISI complete all as specified and all as directed Engr-in-charge. all fixing ccessories deemed to included in rate. |
| 123 | Suply, laying & jointing in tranches DI pipes class K-7 of standard length spigot and socketed end push type self restrained jointwith rubber gasket as jointing material, internal cement morter coating & external surface with butiminous paint 100 mm dia ISI complete all as specified and all as directed Engr-in-charge. all fixing ccessories deemed to included in rate. |
| 124 | Suply, laying & jointing in tranches DI pipes class K-7 of standard length spigot and socketed end push type self restrained jointwith rubber gasket as jointing material, internal cement morter coating & external surface with butiminous paint 80 mm dia ISI complete all as specified and all as directed Engr-in-charge. all fixing ccessories deemed to included in rate. |
| 125 | Supply and fixing in repairs suction line made ofGI tubes medium grade of 100/80 mm dia 3.3 meter long including flange joint with necessary welding work complete with all fittings (like; union, tee, bend, elbow, reducer, socket)to be fixed for suction line complete all as specified and directed by EIC. |
| 126 | Supply and fixing in repairs suction line made ofGI tubes medium grade of 80 mm dia 3.3 meter long including flange joint with necessary welding work complete with all fittings (like; union, tee, bend, elbow, reducer, socket)to be fixed for suction line complete all as specified and directed. |
| 127 | Supply and fixing in repair flatPVC multistranded copper conductor cable of size 6 sqmm x 3 core 36/0.5 including PVC pipe complete electrical connection to motor and starter all as specified and directed by Engr-in-charge. |
| 128 | Supply and fixing in replacement of high density polyethylene pipes (HDPE) of presure rating PN 6, DN 75 mm/ 63 mm 10 kgf/cm2 ISI marked, laid in borewell / open well for water outlet including all connecting accessories complete all as specified and directed by Engr-in-charge. |
| 129 | Supply and fixing in replacement of stainless steel 63 mm dia, 22.5 cm long Nipple medium grade complete all as specified and directed by Engr-in-charge. |
| 130 | Supply and fixing in replacement ofmild steel, clamp 50mm x 5mm for support of HDPE pipe over borewell pipe of 150 mm diaincludingall connecting accessories complete all as specified and directed by Engr-in-charge. |
| 131 | Material and labour for rewinding the circulation centrigugal pump motor of capacity 1 HP, single phase 230 volts, 50 Hzcapacity, disconnecting the electric connection of motors, and removing the motors from its existing position and sending to workshop for repairs/rewinding complete and refixing the same after repairs complete all as specified and directed by Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
