Public Health Engineering Department-PHED has published Tender For Replacement Of Pollution Prone Existing Old Ac Pipe Line By Providing Laying Jointing Of Di And Hdpe Pipe Line Including Testing And Commissioning At Bhagat Ki Kothi Under City Subdiv Riktiya Bheruji Circle Under The Jurisdiction Of City. Submission Date for this Tender is 26-09-2023. Pipe Laying Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PHED BSR 2023-24/1.1 Providing, lowering, laying in trenches, aligning, fixing in position and jointingDuctileIron(DI)ISI markedK-7 gradeS&Spipesas per IS:8329-2000 (amendedup todate),withinternalcementmortar liningsuitable forpotablewaterwithrubberring (EPDM) jointsas perIS:5382-1985includingalltaxes(Centralandlocal), transportation and freight charges, inspection charges, loading/ unloadingcharges, includingcostoflabourandmaterial,specials (Tee,bendetc.)satisfactoryhydraulictesting,disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note:Providingandfixingofallrequisitespecialsasperdrawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 1.1.3150 mm |
| 2 | PHED BSR 2023-24/1.4 Providing,lowering,layingandjointing intrenches, standard lengths HDPEISI marked Pipes as per IS-4984: 1995 (amended up to date) withnecessaryjointingmateriallikemechanicalconnectors, i.e.thread/insertjoint/quickreleasecouplerjoint/compression fittingjointorflangedjointandspecialsjointingpipeby electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer in-charge of following class and diameter. (excluding earth work) . Note:Providingandfixingofallrequisitespecialsasperdrawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. 1.4.1.4HDPE PE-80PN-6 110mm |
| 3 | PHED BSR 2023-24 /4.1 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines,shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete forlifts up to 1.5 depth and strata as specified. The work also includesdepositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. In all type of soil |
| 4 | PHED BSR 2023-24/4.5Dismantling of cement concrete pavement for pipe line line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be madeas per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. |
| 5 | PHED BSR 2023-24/4.8Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be madeas per standard trench width specified in tender document and no extra payment shallbe made for trench width more than specified,complete work as per technical specification and scope of work. 4.8.1M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 6 | PHED BSR 2023-24/4.6Dismantling of flexible pavement for pipe lineand chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be madeas per standard trench width specified in tender document and no extra payment shall be madefor trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work. 4.6.1 Bituminous Course |
| 7 | 4.6.2 Granular Courses |
| 8 | PHED BSR 2023-24/1.15 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding,lowering,laying,aligning,fixinginpositionatalllevel/ depths in trenches complete includingall taxes, material,labour, inside lining, outside coating, testingandcommissioning alongwithpipelineaspertechnicalspecifications anddirection of Engineer-in-charge.1.15.1 MS pipespecialsupto600mmdia (withminimum5mmthickness sheet) |
| 9 | PHED BSR 2023-24/ 6.1 Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirfing to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insersion rubber of black EPDM 6mm thick .Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.6.1.1Manually Operated CI Sluice valve of Class PN-1.0 6.1.1.2 100mm |
| 10 | 6.1.1.4150mm |
| 11 | PHED BSR 2023-24/1.26 ProvidingHouseholdTapConnection aspertechnicalspecification andapproved drawing and as per relevant IS code (amended up to date) from HDPE pipe line up to consumer meter/premises by using electro fusion saddlepiece(Completejob).Thisjobincludesdigging out suitable size of pits and trench for laying service line in all kinds of soil;depositingandrefillingofpit&jhiriwithwatering&ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting dulyapprovedinaccordancewith specificationforpotablewater including electrofusion saddle piece, gunmetal ferrule 4.0 mm , GM Full-wayValve(IS:778Mark)orwheelvalveandspecials,below ground level 20 mm nominal dia MDPE pipe PE80 PN 16 as per ISO 4427 / 20 mm nominaldia PPR-C (Three layered) pipePN16 SDR 7.4 (IS:15801:2008)(ISImark)forandabovegroundlevelusing20mm diaPPR-C pipe withstandardPPRfittings/15mmdiaGIpipes with fittingsinthepremisesforfixingatap/meterbox(excluding) ,including accessories with flushing, cleaning, disinfecting and testing ofpipelinecompleterequiredformakingofserviceconnection completeinallrespectincludinglabourcharges.Theserviceline should be laid at least 45 cm below ground level. Note:Roadcutandrestorationisnotpartofthisitemandpaid separately.1.26.1Forconnectionwith20mmdiaMDPE/PPR-Cpipelengthupto05 mtr. |
| 12 | 1.3 Roadcuttingforhouseholdserviceconnectioninminimumtrench widthwhereverroadcrossingisrequired.Roadcuttingofcement concrete,WBM, Black top etc. of all thickness shall be doneby using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge.. |
| 13 | PHED O&M BSR 2020/1.10Work of interconnection in CI/DI/MS pipeline upto 1.5 mtr depth by digging out sutible size of pit at site of work including dewatering and providing adequate safety arrangements at site, cutting of existing pipeline , jointing of tee (complete) and other specials to make interconnection repair leak proof and refilling of excavated trench /pit/road shall be done properly i.e. after a layerof 20cm with proper watering and ramming in layers, for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. 1.10.1.1 in all kind of soil80mm to 100mm |
| 14 | 1.10.1.2 125mm to 150mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
