}

Tender For Left Out Work Of Boundary Wall, Leveling, Construction Of Drain And Aluminum Partition In Existing Academic Blocks At Govt. Degree College Sidhra, Jammu, nagrota-Jammu And Kashmir

Public Works Department-PWD has published Tender For Left Out Work Of Boundary Wall, Leveling, Construction Of Drain And Aluminum Partition In Existing Academic Blocks At Govt. Degree College Sidhra, Jammu. Submission Date for this Tender is 25-09-2023. Drainage Tenders in nagrota Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

39742931
Tender For Left Out Work Of Boundary Wall, Leveling, Construction Of Drain And Aluminum Partition In Existing Academic Blocks At Govt. Degree College Sidhra, Jammu
Open Tender
Indian
Jammu And Kashmir
nagrota
25-09-2023

Tender Details

Tender For Left Out Work Of Boundary Wall, Leveling, Construction Of Drain And Aluminum Partition In Existing Academic Blocks At Govt. Degree College Sidhra, Jammu

Key Value

Document Fees
INR 1500 /-
EMD
INR 139580.0 /-
Tender Value
INR 69.79 Lakhs /-

BOQ Items

Name of Work :- Left Out Work of Boundary Wall, Levelling , Construction of Drain and Aluminum Partation in Existing Academic Blocks atGovt. Degree College Sidhra, Jammu.
Sl. No. Item Description
1Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metr All kind of soils.
2Surface dressing of the ground including removing vegetation and in-equalitiesnot exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto1.5 m in -All kinds of soil.
3Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
4Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size
5Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
6Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
7Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
812mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
915mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
10Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
11Centering and shuttering including strutting, propping etc. and removal of form work for:
12Foundations, footings, bases for columns
13Lintel, beams, plinth beams, girders, bressumers and cantilevers.
14Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
15Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes
16Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately)
17Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per meter cost of total length of barbed wire used. With G.I. barbed wire
18Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
19Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work Boundary Wall
20Providing and fixing of SS 304 alphabets of height of 1"-0" and thicknessof 25mm having Guage of 22&24 on ACP Sheet all complete job
21Providing and fixing ACP Sheet of 5mm thick over theiron angle Frame of 25mm SHSof thickness 1.6 mm and required height and width including College Logo. all job complete.
22Providing and fixing of 50 mm thick Puff Continuous line wall Panel with 0.5 mm thick PPGI on outer and 0.5 mm PPGI on Inner side with Colour RAL9002 (off white) on Both sides with U channel of size 40x50x40 mm with 0.5 mm thick PPGI sheet (570 feets) Partation walls in existing class rooms
23Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.
24Stone aggregate Below 40mm nominal size average lead 20.00 Km
25Sand for an avg. lead of 20.00 Kms.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail