Providing 100Mm Di/80Mm Gi Pipe Line From Jarawa Creek Oht Feeder Tank To Uphill House Near Helipad, Jarawa Creek Village And Laying Of Distribution Line Of Various Sizes To Cater Treated Water Supply To The Residents Of Uphill Village, Jarawa Creek Under
Tender Value
58.23 Lakhs
Estimated cost
Bid Submission
05 Oct 2023
0 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baratang → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing 100Mm Di / 80Mm Gi Pipe Line From Jarawa Creek Oht Feeder Tank To Uphill House Near Helipad, Jarawa Creek Village And Laying Of Distribution Line Of Various Sizes To Cater Treated Water Supply To The Residents Of Uphill Village, Jarawa Creek Under The Jurisdiction Of Head Quarter Section, Under Sd-Iii, Cd-I, Rangat Including Installation Of 01 No Diesel Pump At Gm School For Pumping Water Supply To Rajathgarh Village
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 2 | All kinds of soil |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 4 | All kinds of soil. |
| 5 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 6 | All kinds of soilPipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 11 | Foundations, footings, bases for columns |
| 12 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : |
| 13 | 100 mm dia Ductile Iron Class K-9 pipes |
| 14 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : |
| 15 | 100 mm dia pipes |
| 16 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : |
| 17 | 100 mm diameter pipe |
| 18 | Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 : |
| 19 | Up to 300 mm dia |
| 20 | Supplying pig lead at site of work. |
| 21 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : |
| 22 | 100 mm dia |
| 23 | 80 mm dia |
| 24 | 50 mm dia |
| 25 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : |
| 26 | 100 mm diameterClass I |
| 27 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 28 | 80 mm dia nominal bore |
| 29 | 65 mm dia nominal bore |
| 30 | 50 mm dia nominal bore |
| 31 | 40 mm dia nominal bore |
| 32 | 25 mm dia nominal bore |
| 33 | 15 mm dia nominal bore |
| 34 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 35 | 25 mm nominal bore |
| 36 | 40 mm nominal bore |
| 37 | 50 mm nominal bore |
| 38 | 65 mm nominal bore |
| 39 | 80 mm nominal bore |
| 40 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : |
| 41 | 80 mm nominal boreHorizontal |
| 42 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 43 | 15 mm nominal bore |
| 44 | 25 mm nominal bore |
| 45 | 40 mm nominal bore |
| 46 | 50 mm nominal bore |
| 47 | 65 mm nominal bore |
| 48 | 80 mm nominal bore |
| 49 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 50 | 15 mm nominal bore |
| 51 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : |
| 52 | 100 mm dia nominal bore |
| 53 | Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : |
| 54 | 100 mm dia |
| 55 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 56 | 12 mm cement plaster of mix : |
| 57 | 1:4 (1 cement: 4 coarse sand) |
| 58 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
| 59 | 80 mm diameter pipe |
| 60 | 65 mm diameter pipe |
| 61 | 50 mm diameter pipe |
| 62 | 40 mm diameter pipe |
| 63 | 25 mm diameter pipe |
| 64 | Constructing masonry Chamber 30x30x50 cm inside, in cement concrete hollow block size of 400x100x200mm work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 65 | Constructing masonry Chamber 60x60x75 cm inside, in cement concrete hollow block size of 400x100x200mm work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 66 | Supplying, installing, testing and commissioning of Kirloskar make, TV2 model, 16 HP, 1800 RPM, water cooled diesel engine or equivalent coupled with Kirloskar make, 16SR6 model pump or equivalent for discharge of 4.9 LPS ata head of 95 mtrs with CI construction having suctionand delivery 80mmx65mm with all accessories including common base plate, coupling, coupling guard, foundation bolts, coupling flanges, attached fuel tank, suitable foot volve and all other accessories as required. |
AI Tender Summary
Tender Timeline
Sep 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender