Tender For Construction Of Natyagriha Complex (Phase-Ii) In Prabhag No.14, Ekta Nagar
Tender Value
4.01 Crore
Estimated cost
Bid Submission
03 Oct 2023
0 days left
EMD
4.01 Lakhs
Bank guarantee accepted
Document Fee
40000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
buldana → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Natyagriha Complex (Phase-Ii) In Prabhag No.14, Ekta Nagar
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means(S.S.R. It. No. 21.02/Pg. No. 153) |
| 2 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means(S.S.R. It. No. 21.06/ Pg. No. 153) |
| 3 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete. Spec. No.: Bd.A. 11/Page No. 263(S.S.R. It. No. 21.37/ Pg. No. 157) |
| 4 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with sand / grit ramming, watering etc complete.(S.S.R. It. No. 21.40/ Pg. No. 157) |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural(S.S.R. It. No. 24.08/ Pg. No. 176) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand(S.S.R. It. No. 24.01/ Pg. No. 175) |
| 7 | Providing and laying in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand(S.S.R. It. No. 25.11/ Pg. No. 178) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand(S.S.R. It. No. 25.31/ Pg. No. 179) |
| 9 | GROUND FLOOR |
| 10 | FIRST FLOOR |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand(S.S.R. It. No. 25.50/ Pg. No. 181) |
| 12 | GROUND FLOOR |
| 13 | FIRST FLOOR |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (S.S.R. It. No. 25.70/ Pg. No. 182) |
| 15 | GROUND FLOOR |
| 16 | FIRST FLOOR |
| 17 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand(S.S.R. It. No. 26.05/ Pg. No. 184) |
| 18 | GROUND FLOOR |
| 19 | FIRST FLOOR |
| 20 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand(S.S.R. It. No. 26.25/ Pg. No. 185) |
| 21 | GROUND FLOOR |
| 22 | FIRST FLOOR |
| 23 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand(S.S.R. It. No. 26.23/ Pg. No. 185) |
| 24 | GROUND FLOOR |
| 25 | FIRST FLOOR |
| 26 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.a) For TMT Fe 415 steel bars (If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken)(S.S.R. It. No. 26.33/ Pg. No. 188) |
| 27 | GROUND FLOOR |
| 28 | FIRST FLOOR |
| 29 | Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600 c to C having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut- Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete(S.S.R. It. No. 51.04/ Pg. No. 352) |
| 30 | GROUND FLOOR |
| 31 | FIRST FLOOR |
| 32 | Providing & Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty G.I. frame, ceiling channels at 300 c to c, & intermediate channels not more than 1200 C to c, suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing- items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete(S.S.R. It. No. 51.09/ Pg. No. 353) |
| 33 | GROUND FLOOR |
| 34 | FIRST FLOOR |
| 35 | SECOND FLOOR |
| 36 | Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs,(S.S.R. It. No. 38.51/ Pg. No. 243) |
| 37 | GROUND FLOOR |
| 38 | Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides, including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings finishing-items / melamine polish & / Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc. complete(S.S.R. It. No. 51.05/ Pg. No. 352) |
| 39 | Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels etc for various partition frame as per Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete(S.S.R. It. No. 51.16/ Pg. No. 354) |
| 40 | GROUND FLOOR |
| 41 | FIRST FLOOR |
| 42 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.(S.S.R. It. No. 27.12/ Pg. No. 198) |
| 43 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding(S.S.R. It. No. 27.13/ Pg. No. 198) |
| 44 | GROUND FLOOR |
| 45 | FIRST FLOOR |
| 46 | Providing Water proofing treatment to old terraces by removing existing treatment, sealing of cracks by non shrink crack fill compound applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved make and Cement in 1 : 2 proportion (1 litre polymer: 2 Kg Cement) to a neatly cleaned and dust free concrete surface and upto 300 mm over parapet wall prepared by removing(S.S.R. It. No. 52.26/ Pg. No. 435) |
| 47 | GROUND FLOOR |
| 48 | FIRST FLOOR |
| 49 | Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Providing groove at joint of B.B. Masonry and concrete members complete.(S.S.R. It. No. 32.04/ Pg. No. 209) |
| 50 | GROUND FLOOR |
| 51 | FIRST FLOOR |
| 52 | Providing and applying Two coats of wall care Putty of 2mm thickness for plastered surface and 5-6mm thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc complete. a) For plastered walls/ceiling(S.S.R. It. No. 32.34/ Pg. No. 212) |
| 53 | GROUND FLOOR |
| 54 | FIRST FLOOR |
| 55 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the(S.S.R. It. No. 32.11/ Pg. No. 209) |
| 56 | GROUND FLOOR |
| 57 | FIRST FLOOR |
| 58 | Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position(S.S.R. It. No. 32.32/ Pg. No. 211) |
| 59 | GROUND FLOOR |
| 60 | FIRST FLOOR |
| 61 | Providing and laying Vitrified stone effect finish tiles Flooring having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete a) Flooring(S.S.R. It. No. 33.46/ Pg. No. 218) |
| 62 | GROUND FLOOR |
| 63 | FIRST FLOOR |
| 64 | Providing and laying Vitrified stone effect finish tiles For Dado & Skirting having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622- 2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting(S.S.R. It. No. 33.47/ Pg. No. 218) |
| 65 | GROUND FLOOR |
| 66 | FIRST FLOOR |
| 67 | Providing and laying in position flooring of telephone black/ Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc.(S.S.R. It. No. 33.34/ Pg. No. 216) |
| 68 | GROUND FLOOR |
| 69 | FIRST FLOOR |
| 70 | Providing sills of Granite required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete.(S.S.R. It. No. 33.22/ Pg. No. 215) |
| 71 | GROUND FLOOR |
| 72 | FIRST FLOOR |
| 73 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (Inluding primer coat) etc. complete.(S.S.R. It. No. 36.14/Pg. No. 228) |
| 74 | GROUND FLOOR |
| 75 | FIRST FLOOR |
| 76 | Providing and applying two coats of exterior acrylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.(S.S.R. It. No. 35.26/Pg. No. 225) |
| 77 | GROUND FLOOR |
| 78 | FIRST FLOOR |
| 79 | Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.(S.S.R. It. No. 35.09/Pg. No. 223) |
| 80 | GROUND FLOOR |
| 81 | FIRST FLOOR |
| 82 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller(S.S.R. It. No. 39.43/Pg. No.254) |
| 83 | GROUND FLOOR |
| 84 | FIRST FLOOR |
| 85 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.(S.S.R. It. No. 39.68/Pg. No. 258) |
| 86 | GROUND FLOOR |
| 87 | FIRST FLOOR |
| 88 | Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting,(S.S.R. It. No. 39.01/Pg. No. 245) |
| 89 | GROUND FLOOR |
| 90 | FIRST FLOOR |
| 91 | Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 6524-1983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm(S.S.R. It. No. 39.57/Pg. No. 257) |
| 92 | GROUND FLOOR |
| 93 | FIRST FLOOR |
| 94 | Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm, 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick, vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc., I.S.I. mark, heavy duty, Hydraulic floor spring of 150 kg capacity, having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and (S.S.R. It. No. 39.63/Pg. No. 258) |
| 95 | Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. compete(S.S.R. It. No. 39.72/Pg. No. 260) |
| 96 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats.(S.S.R. It. No. 39.04/Pg. No. 245) |
| 97 | GROUND FLOOR |
| 98 | FIRST FLOOR |
| 99 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc.(S.S.R. It. No. 39.09/Pg. No. 246) |
| 100 | GROUND FLOOR |
| 101 | FIRST FLOOR |
| 102 | Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER Consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles rails top and bottom rails and two 19 x 19 mm MS tubesinserted horizontally inside the hollow profile section using 4/5mm sheet using screws hollow profile shall be lipped with 10mm (5mm x 2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing.(S.S.R. It. No. 39.82/Pg. No. 262) |
| 103 | GROUND FLOOR |
| 104 | FIRST FLOOR |
| 105 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S.(S.S.R. It. No. 39.26/Pg. No. 249) |
| 106 | GROUND FLOOR |
| 107 | FIRST FLOOR |
| 108 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.(S.S.R. It. No. 40.01/Pg. No. 264) |
| 109 | GROUND FLOOR |
| 110 | FIRST FLOOR |
| 111 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe(S.S.R. It. No. 40.07/Pg. No. 264) |
| 112 | GROUND FLOOR |
| 113 | FIRST FLOOR |
| 114 | Providing and fixing Coloured glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm. size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.(S.S.R. It. No. 41.72/Pg. No. 273) |
| 115 | GROUND FLOOR |
| 116 | FIRST FLOOR |
| 117 | Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.(S.S.R. It. No. 42.30/Pg. No. 277) |
| 118 | GROUND FLOOR |
| 119 | FIRST FLOOR |
| 120 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete.(S.S.R. It. No. 42.34/Pg. No. 277) |
| 121 | GROUND FLOOR |
| 122 | FIRST FLOOR |
| 123 | Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall.(S.S.R. It. No. 41.57/Pg. No. 271) |
| 124 | GROUND FLOOR |
| 125 | FIRST FLOOR |
| 126 | Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall(S.S.R. It. No. 41.58/Pg. No. 271) |
| 127 | GROUND FLOOR |
| 128 | FIRST FLOOR |
| 129 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity(S.S.R. It. No. 42.53/Pg. No. 280) |
| 130 | Providing and fixing on walls/ ceiling/ floor required dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.(S.S.R. It. No. 42.55 to 42.60 Pg. No. 280) |
| 131 | 15 MM DIA PIPE |
| 132 | 25 MM DIA PIPE |
| 133 | 32 MM DIA PIPE |
| 134 | 40 MM DIA PIPE |
| 135 | 50 MM DIA PIPE |
| 136 | Providing and laying in trenches of required dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete(S.S.R. It. No. 42.65/Pg. No. 281) |
| 137 | 40 MM DIA PIPE |
| 138 | Providing and fixing of required dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete(S.S.R. It. No. 42.51/Pg. No. 279) |
| 139 | A) 75 mm dia. |
| 140 | B) 100 mm dia. |
| 141 | Providing and Fixing 110 mm diameter PVC Rain Water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete.(S.S.R. It. No. 42.87/Pg. No. 283) |
| 142 | Providing and fixing screw down bib/stop tap of brass including necessary socket union nut complete.(S.S.R. It. No. 41.40/Pg. No. 270) |
| 143 | Providing and fixing screw down wheeled stop tap of brass including necessary sockets/union nut complete.(S.S.R. It. No. 41.43/Pg. No. 270) |
| 144 | 15 MM DIA |
| 145 | 25 MM DIA |
| 146 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete.(S.S.R. It. No. 42.67/ Pg. No. 281) |
| 147 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed(S.S.R. It. No. 42.02/Pg. No. 274) |
| 148 | Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover.(S.S.R. It. No. 42.12/Pg. No. 275) |
| 149 | Providing & constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover.(S.S.R. It. No. 42.13/Pg. No. 275) |
| 150 | Providing soak pit of size 120cm x 120cm x 120cm including excavating & filling with brick-bats etc.complete.(S.S.R. It. No. 42.19/Pg. No. 275) |
| 151 | Providing and fixing 450x550 mm size superior type belgium mirror with 16 mm. dia. chromium plated towel rod etc.(S.S.R. It. No. 42.20/Pg. No. 276) |
| 152 | Providing & fixing chromium coated towel rod 16mm dia and 75cm in length including all accessories complete.(S.S.R. It. No. 42.31/Pg. No. 277) |
| 153 | Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested(S.S.R. It. No. 42.36/Pg. No. 277) |
| 154 | Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed.(S.S.R. It. No. 46.29/Pg. No.297) |
| 155 | Dismantling Brick masonry in lime or cement mortar and stacking the materials as directed with all leads and lifts etc. complete.(S.S.R. It. No. 46.29/Pg. No.297) |
| 156 | Transportation of material For 5 Km obtained from debris of various sorts including necessary excavation/loosing including loading, unloading and conveying and disposing as directed.(As per Carting Charges) |
| 157 | Testing of Material used for the consturction work as per frequency of work & minimum Quantites required to be sent to Laboratories.(As pe Frequency Chart) |
| 158 | Murum-Liquid limit & plastic Limit. |
| 159 | 80mm soling Sieve Analysis. |
| 160 | C.C. Cube M-20 Grade-Compressive Strength |
| 161 | TMT Steel Bar-Above 16 mm |
| 162 | Bricks-Water Absorption (Set of 5 Bricks), Compressive Strength. |
| 163 | Flooring Tiles-Flexural test, Water Absorption |
| 164 | Natural stone Flooring-Water absorption,Specific gravity |
| 165 | Cement-Std Consistancy Fineness, Spe. Gravity, (Initial & Final), Compressive Strength, Soundness. |
| 166 | Sand -Fineness Modulus (Sieve Analysis), Silt & Clay Content |
| 167 | Course Aggregate-Water Absorption, Specific Gravity, Impact Value /Crushing Value. |
| 168 | Royalty Charges of Various Mining materials required for construction works i.e. earth, murum, rubble, metal & sand etc. complete. |
| 169 | Murum/80mm soling |
| 170 | Sand |
AI Tender Summary
Tender Timeline
Sep 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender