Directorate Of Construction, Services And Estate Management-DCSEM has published Tender For Providing Lighting Arrangement For Volleyball Court, Kabaddi Court, Main Gate, Basketball Court And Skating Rink At Ptaaf Complex And Volleyball Court At Western Sector, Anushaktinagar, Mumbai-94. Submission Date for this Tender is 10-10-2023. LED Light Tenders in mumbai Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Poles |
| 2 | Fabrication, supply, installation of 14.5 mtr.high swaged ERW MS tubular pole (410SP-73) as per IS 2713-1980 for pole with pipe material as per IS 1161 grade Yst-240 part II with MS base plate of 460mm x 460mm x 12 mm, 4 nos. of 300mm length MS webs made up of 5 mm thick MS plate shall be provided between pole & base plate, 2 nos. 10 mm dia. G.I. earthing studs welded to pole,hot dipped galvanized, Pole shall be embedded 2000 mm below ground level including excavation of soil/rock with 1:2:4 PCC on 150 mm thick 1250 mm square base concrete, upon that depth 2000 mm, 1000 mm square base concrete upto ground level & 450 mm dia 400 mm high above ground level around the pole in level, plumb line & plaster finish,terminal boxes mounting arrangement shall be made on the pole 1500 mm from ground level. Scope also includes treatment of pole with bituminous preservatives for embedded portion for 2 meters from base plate of the pole and instruction of E.I.C. |
| 3 | Fabrication,supply, installation, and erection of 9 m (above ground level ) Octagonal pole internally & externally hot dipped galvanised similar to BOP -9031 M/s Bajaj or equivalent, fabricated out of 3mm thick sheet as per relevant I.S, complete withHot deep galvanized Bracket made up of MS angle / C channel/ flat suitable for installation of 2 nos LED flood light fixtures, built in junction box, base plate size 200 X 200 X16 mm, as per detailed specifications & drawing. Junction box should be provided 500 mm above base plate with 4 Nos brass terminals on epoxy insulator, 2 no 6A SP MCB& 1 no. neutral link mounted on 4 mm thick Bakelite sheet, 2mm GI gland plate etc. Base plate should have 4 nos holes suitable for mounting on M30 RCC foundation 200 mm above FGL. The cost of pole shall include the cost of RCC foundation , foundation bolts, anchor plates, nuts, washers, min 2 nos. HDPE PLB pipe 40/33 mm dia bend to shape approx. 1.0 m in length, & including excavation in all types of soil/foot path cutting, temporary reinstatement, back filling, dewatering, consolidation, disposal of excess earth within the radius of 3000 m and making good to the original finish etc. as per enclosed detailed specifications & drawings, as required to complete the work in all respect as per instructions of the E-I-C. |
| 4 | Terminal boxes |
| 5 | Providing IP66 terminal box of size 300x200x125mm FRP box of ELM makewith 10 sq.mm connectors( 7 no.s) & 5 No.s 6A SP,MCB"s, 1 no. 8 way each for neutral link and earthing link , 2mm thickness SS glanding plate, etc. |
| 6 | Providing IP66 terminal box of size 300x200x125mm FRP box of ELM makewith 10 sq.mm connectors( 5 no.s) & 3 No.s 6A SP,MCB"s, 1 no. 6 way each for neutral link and earthing link , 2mm thicknessSS glanding plate, etc. |
| 7 | Providing IP66 terminal box of size 300x200x125mm FRP box of ELM makewith 6 sq.mm connectors( 4 no.s) & 2 No.s 6A SP,MCB"s, 1 no. 4 way each for neutral link and earthing link , 2mm thickness SS glanding plate, etc. |
| 8 | G.I.pipe for cable entry :- Supply & installation of 50 mm dia. GI pipe Class “B” bent to shape for cable entry with all fixing arrangement to above poles &across drains/road all as per the instructions of E.I.C. |
| 9 | Earthing of Poles :-Earthing of street light pole with 2 nos. of 8 SWG G.I. earth wires each 8 M long coiled in 1 M dia at a depth of 1400 mm below ground level complete with soldering and connection with sockets etc. all as per drawings specifications, and as per instruction of E.I.C. |
| 10 | Supply, installation, testing & commissioning of following LED luminaries having a minimum efficacy of 130 lm/watts with cool white/ neutral white colour temperature & pressure die cast Aluminium housinghavingIP66 protection etc. All the accessories shall be housed in side light fixture with suitable connector.Scope also includes providing interconnection with 3Cx2.5 sq. mm copper conductor PVC insulatedPVC sheathed flexible cable, earthing of fixture, PVC coated Galvanized steel conduit to be provided for exposed flexible cable, etc.(Independent wiring to be done for each fixture from terminal box). Note: 1) The fixture to be got approved by department before manufacturing/supply. 2) Luminaires shall have 5 years onsite replacement warranty from OEM from the supply date including driver / control gear, LED, all accessories etc. "The certificate for same shall be submitted at the time of supply. |
| 11 | LED Flood light luminaire suitable for outdoor Basket ball court having minimum output of 46500 lumens, efficacy of 130 lm/watts, CRI 70, IP66, IK08, Surge protection 4 kV, THD =10%, Pressure Die cast housing, Anti dust exposed lens, optical lense, polycarbonate optical covers. The scope of work includes aiming of fixtures after lighting design for outdoor Basket ball using software to get the following parameter at surface of the Basket ball court. a) Average Lux 500 b) overall Uniformity ( Emin/Eav) : 0.5 c) Glare : =<10 |
| 12 | LED Flood light luminaire suitable for outdoor Skating Rink having minimum output of 38500 lumens, efficacy of 130 lm/watts, CRI 70, IP66, IK08, Surge protection 4 kV, THD =10%, Pressure Die cast housing, Anti dust exposed lens, optical lense, polycarbonate optical cover. The scope of work includes aiming of fixtures after lighting design foroutdoor Skating Rink using software to get the following parameter at surface of the Skating Rink . a) Average Lux 500 b) overall Uniformity ( Emin/Eav) : 0.5 c) Glare : =<10 |
| 13 | LED Flood light luminaire suitable for outdoor Kabaddi & Volleyball court having minimum output of 20300 lumens, efficacy of 130 lm/watts, CRI 70, IP66, IK08, Surge protection 4 kV, THD =10%, Pressure Die cast housing, Anti dust exposed lens, optical lense, polycarbonate optical cover. The scope of work includes aiming of fixtures after lighting design foroutdoor Kabaddi & Volleyball court using software to get the following parameter at surface of the Kabaddi & Volleyball court. a) Average Lux 250 b) overall Uniformity ( Emin/Eav) : 0.5 c) Glare : =<10 |
| 14 | LED recessed downlight luminaire having min 3000 lumen nominal output of 36W and 4000K CCT. |
| 15 | Distribution boards/feeder pillars/meter boxes |
| 16 | Power feeder /contactor box: Supply, installation ,testing & commissioning of 600 x 420 x 200 mm FRP box of ELM make, IP-55 weather proof with following equipments : i. 40A,4P,MCB- 1no. ii.25A, 30mA, DP, RCBO- 3 nos. iii. 6-32A SP MCB - 18 nos. iv. MCB shorting link 4ways -3 nos. v. Nuetral link 18ways -4 nos. vi. Earth link 18 ways -1 no. Note : a) Interconnection of power circuit shall be done with 6sq.mm FRLS flexible copper wires &heavy duty reducer type copper lugs etc. b) Danger board shall be provided. c) The scope also includes making excavation, PCC padestal foudation and 40x40x5mm MS angle frame including painting with two coats of primer and two coats of epoxy paint of approved shade and fixing the DB at 800mm height. |
| 17 | MCB with Enclosure: Supply, installation ,testing & commissioning of 25A, 4P, 10KA MCB with enclosure. The scope also include the fixing of these with existing LT Panel at site including jointing with busbar. |
| 18 | Cabling works: Installation, testing & commissioning of Dept. supplied 1.1 KV,4 C x 10 sq. mm aluminum conductor cable on wall/column/slab/RCC trench/ shaft on existing GI flat/angle support, all fixing accessories etc., in Hume pipe, in ground at a depth of 900 mm below ground level ( including excavation and making test pit) including sand bedding, laying of baked bricks on side & top, reinstatement, back filling, dewatering, consolidation etc.as per instructions of the E-I-C. Scope also include issuing of items from DCSEM stores, Anushaktinagar, loading & unloading & transportation to sites all as required and instructed by E-I-C. |
| 19 | In ground in all types of soil including soft rock |
| 20 | In existing RCC hume pipes/G.I. pipes trench/wall/beam/column with necessary spacers & saddles/GI clamps etc. |
| 21 | Cabling works:Supply, installation, testing & commissioning of 1.1 KV ,XLPE insulation, PVC inner sheathed, G.Iarmoured, extruded FRLS PVC outer sheathed,4 C x 25 sq. mm aluminum conductor cableconforming to IS 7098 Part-I with latest amendments, on wall/column/slab/RCC trench/ shaft on existing GI flat/angle support, all fixing accessories etc., in Hume pipe, in ground at a depth of 900 mm below ground level ( including excavation and making test pit ) including sand bedding, laying of baked bricks on side & top, reinstatement, back filling, dewatering, consolidation etc.as per instructions of the E-I-C. |
| 22 | In ground in all types of soil including soft rock |
| 23 | In existing RCC hume pipes/G.I. pipes trench/wall/beam/column with necessary spacers & saddles/GI clamps etc. |
| 24 | LT cable termination: Providing end termination of following sizes of 1.1 kv grade XLPE insulated armoured cables with solder less heavy duty tinned copper lugs, heavy duty double compression brass cable gland, insulation tape, duplicate earthing with brass earthing tags of suitable thickness ,inter connection to nearest earthing point with 2.5 sq.mm flexible copper wires, copper lugs etc. as per relevant IS specification and as per instruction of Engineer in-charge. Note: Scope of work includes providing brass cable feeder number tags at each feeder end. |
| 25 | 4 C x 10 sq. mm Al.Conductor cable |
| 26 | 4 C x 25 sq. mm Al.Conductor cable |
| 27 | Earth excavation in hard rock/soft rock & breaking the existing drain wells & reinstallation:- |
| 28 | Excavation in soft soil/murum including shorting or dewatering, removing of bricks/tiles etc.,disposing the excess earth within the radius of3000 m, refilling, consolidation ofsurface etc. as required & as directed by Engineer-in- charge. |
| 29 | Cutting of asphalt road / concrete flooring /drain by using hydraulic drilling machine upto 200mm depth as required and stacking of rocks, refilling, consolidation ofsurface & Disposing the excess earth within the radius of3000 m as required & as directed by Engineer-in- charge. |
| 30 | Excavation of hard rock, cutting as required including blasting & chiselling, using compressor, dewatering, back filling, if necessary, disposal of excess earth within the radius of 3000M etc. stacking of rocks at selected places as per instructions of E.I.C. |
| 31 | Removal of pevar block / shahbaz stone / existing drain wells & refixingas per original as required & as directed by Engineer-in-charge. |
| 32 | Providing plain cement concrete 1:2:4 using graded stone aggregate ofincluding consolidation, frame work & shuttering as required ,finishing, curring etc. as per specification & as directed by EIC. |
| 33 | Installation of RCC hume pipes of 150 mm F(non pressure type) jointing with collars & necessary mortar, instructions of Engineer-in-charge. Scope also include issuing of items from DCSEM stores, Anushaktinagar, loading & unloading & transportation to sites all as required and instructed by E-I-C. |
| 34 | Earthing system |
| 35 | Supply, installation, testing and commissioning of earth station with heavy dipped GI earth plates electrode 600 x 600 x 6.0 mm in size at the depth of 2.5 m below ground level (bottomof Plate) confirming to IS 3043 complete with all required materials like coke / charcoal, salt, G.I nut bolts, washers, 19 mm dia GI pipe (B class), 150 mm thick concrete wall chamber of suitable size duly plastered, heavy duty (minimum 6 mm thick) M.S chequred plate cover associated materials like 40 x 40 x 5 mm angle iron frame work, hinged locking arrangements, complete with funnels, GI test links (50 x 6 mm), two runs of 25 x 6mm G.I strips for connecting G.I plate & test link etc. including excavation of ground in all types of soils, refilling & removal of excess earth within a radius of 500 m etc. all as required as per the drawing specifications & instructed by Engineer-in-charge.Note:- The chamber cover & frame shall be got approved by Department & painted withtwo coats of red oxide & one coat of enamel paint. |
| 36 | Supply, installation, testing & commissioning of heavy dipped 25 X3mm GI strip fixed to wall / slab / column / beam with 2mm thick GI saddle or in ground at a depth of 750 mm below ground level including excavation in all type of soil with protective baked bricks, refilling and removal of excess earth within a radius of 500 mtrs., temporary reinstatement and back filling of trench, interconnection of earth strip / wire GI nut bolts & washers, painting with two coats of black bituminous compound for earth strip in ground and green colour enamel painting strip on surface etc. all as required & instructed by the E-I-C. |
| 37 | GI strip fixed to wall / slab / column / beam / pole with 2mm thick GI saddle, 4-5 mm GI spacer. |
| 38 | GI strip in ground at a depth of 750 mm below ground level |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
