Tender For Supply And Installation Of Lidar Sensor, ranchi-Jharkhand

Tender For Supply And Installation Of Lidar Sensor The supplier must have sold at least 5 LIDAR SENSOR within India in last 5 (five) years. The supplier should provide list of installation in India with all contact details and model details so that BIT, Mesra can approach contact person for any feedback. 2. Specification claimed must be supported by printed literature of the company. 3. The supplier of the instrument must confirm in writing that the spares for the entire instrument will be available for a period of at least ten years after the model of equipment supplied has been phased out. For frequently required spares, there should be adequate inventory with the Indian agency. 4. Supplier must have proven capability and trained expert manpower to troubleshoot equipment both in the hardware and application part. 5. Bidders shall invariably furnish documentary evidence (client’s certificate) in support of the satisfactory operation of the equipment. 6. Suitable and essential tool kit is to be supplied with the equipment for the required maintenance. 7. Any accessories that must be needed for operation of the equipment, but not mentioned in this specification shall also be quoted by the vendor. 8. The instrument should be installed and commissioned at site. Site requirement has to be mentioned by the supplier. Complete technical details of pre-installation requirements should be furnished along with the technical bid. Birla Institute of Technology, Mesra will only provide the installation room, air-conditioning units and required electrical outlets. Vendors are expected to supply all other installation accessories, infrastructures, facilities and services required for successful installation and smooth operation of the equipment. Vendors may conduct the site survey before installation at no additional cost 9. If in any case, shifting of the instrument is required in future, the vendor need to shift the instrument being offered after installation. It should be free cost for the dismounting, packing, unpacking, re installation and commissioning of the system with test running of the systems. Damage during the shifting if any of the machines must be the liability of the vendor. 10. Annual turnover of company must have minimum 1 crores 11. Vendor is responsible for unloading the items from shipping vehicle and shifting it to the room specified by BIT Mesra. Unloading the LIDAR SENSOR unit and shifting the item to lab Page 4 of 10 should under the supervision of a qualified engineer or specialist appointed by vendor. Any unforeseen error occurred due to improper unloading of the items (LIDAR SENSOR unit and its accessories) or improper handling during shifting the same to lab, will be under the responsibility of vendor. If any such damage happens, that product should be replaced. 12. Backup software must be provided on optical media. Any further version of the software and updates must be provided free of cost for 10 years. 13. Provision for on-line remote diagnosis of faults should be available.

Refer document

INR 72000.0 /-

Refer document