Tender For Increasing Capacity Of 250 Kva To 400 Kva Behind Police Thana Mahanagar And 160 To 250 Kva Near It Churaha Construction Of New Lt Substation 250 Kva Chitra Mukherji House Package No 155 To 161 Under Eudd Mahanagar
Tender Value
20.32 Lakhs
Estimated cost
Bid Submission
23 Sep 2023
0 days left
EMD
20500
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mahanagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Increasing Capacity Of 250 Kva To 400 Kva Behind Police Thana Mahanagar And 160 To 250 Kva Near It Churaha Construction Of New Lt Substation 250 Kva Chitra Mukherji House Package No 155 To 161 Under Eudd Mahanagar
BOQ
| Sl. No. | Item Description |
| 1 | Safe Loading, carriage & unloading of following material from Central store and JE store to work site. |
| 2 | ST Pole 11 Mtr long |
| 3 | PCC pole 8.5 mtr. Long. |
| 4 | 11/0.4KV 250 KVA T/F |
| 5 | 11/0.4KV 400 KVA T/F |
| 6 | LT Cable 1x240 sqmm/400/630 sqmm |
| 7 | 11 KV XLPE Cable 3.0x120 sqmm |
| 8 | 11 KV 3x120 mm Termination Kit |
| 9 | ACSR Weasel Conductor. |
| 10 | 11 KV Pin insulator |
| 11 | 11 KV GI Pin |
| 12 | 11 KV Disc Insulator |
| 13 | 11 KV Disc Fitting |
| 14 | AB Conductor (3x120+1x95+1x16) sqmm |
| 15 | 11 KV 3 Way RMU (Ring Main Unit) |
| 16 | Fabrication erection of substation type double pole on ST pole 11Mtr along with fixing of necessary clamp, accessories required of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per RESPO specification& direction of E/I. |
| 17 | Errection of 8.5 mtr. PCC pole by digging pit in 11 KV Line fixing of necessary clamps alongwith grouting & Plinthing of pole. All material shall be supplied by the contractor and PCC pole provided by the department. |
| 18 | Laying of LT Cable 1x240 sqmm/400 sqmm with suitable size of Al lug. All material provided by department. Except Alu. Lugs |
| 19 | Construction of plinth for RMU of size 1.5x1x1 mtr. With help of Ist class bricks and massonary in the ratio 1:4 cement & sand coarse,filling the structure of size 2 feet hight, completely as per norms with RCC top 1:2:2 cement sand coarse ,stone grit with ms bar and MS channel for resting RMU. All material shall be supplied by Contractor. |
| 20 | Earthing of RMU unit with the help of necessary equipment. All material shall be supplied by the contractor. |
| 21 | Making Tin shed complete with channel and roofs, grouting of RMU unit. |
| 22 | Construction of T/F plinth of size 2x2x1.5 mtr. With Ist class bricks and masonary work in the ratio 1:4 cement & sand coarse, filling the structure completely as per norms with RCC top 1:2:2 cement sand coarse stone grit with ms bar and MS channel for resting T/F all material shall be supplied by Contractor. |
| 23 | Rectangular wiremess pel fencing of 11/0.4 KV S/S shall be made as per site requirement not exceeding 3 meter height fabrication with 45x45x5 mm angle the frame should also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support the wiremesh. Rectangular welded type wire mess of size 50x25mm made of 12 S.W.G. wiremesh shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wiremesh welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. The vertical angles shall be grouted 1/6 of its length in ground with 1:2:2 ratio of cement, coarse sand & concrete provision of gate for entry should be provided with pad lock. |
| 24 | Construction of Masonory type Distribution Pillar box with first class brick ballast cement, coarse sand, local sand, brick ballast and MS Round bar of 10 mm dia including supply and mounting of 04 nos. Straight MS Angle 50x50x6x750 mm-3 nos., Henely type tailless fuse units 500 Amps. 650 Volts one no. for incoming and other for outgoing, Copper bus bar 4 nos. 1000x50x6 mm with locking arrangement made of 18 SWG BP Sheet (All the material will be arranged by the contractor) |
| 25 | Pipe type earthing of transformer with 20 mtr deep borring and providing Jindal make GI pipe\"B\" Class 1” dia (20 mtr GI pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI pipe cap. All material shall be supplied by the contractor. |
| 26 | Laying Stringing & Sagging of 3 phase 4 wire 11 KV line by ACSR weasel conductor with the help of necessary Clamp & Insulator as per RESPO Specification and direction on E/I. ACSR weasel conductor shall be supplied by the Department. |
| 27 | Laying of 11 KV XLPE Cable 3x70 Sqmm by Drill method. Only cable shall be supplied by the department. |
| 28 | Hoisting of cable on Pole by 2.5mm GI pipe 6\" dia,cable clamp with nut bolts. |
| 29 | High pressure testing of 11 KV 3x70 XLPE along with arrangement of High Pressure equipment. |
| 30 | Erection of AB Conductor 3x120+1x95+1x16 sqmm and 3x95+1x70+1x16 sqmm on existing/ newly erected pole.Only ABC shall be supplied by the department. |
| 31 | Supply and fixing of clamps. |
| 32 | Dead end clamps with I hook |
| 33 | Holding clamp |
| 34 | Bracing angle set |
| 35 | Suspension clamps |
| 36 | LT Clamp for Pole |
| 37 | Crimping Alu Lugs 250/400/630 sqmm |
| 38 | Copper L-Piece for T/F |
| 39 | Nut & bols off size |
| 40 | Sandry Item |
| 41 | Laying Stringing & Sagging of 3 phase 4 wire 11 KV line by ACSR weasel conductor with the help of necessary Clamp & Insulator as per RESPO Specification and direction on E/I. ACSR weasel conductor shall be supplied by the Department. |
| 42 | Grouting & Nuzzling of stay set complete including supply and fixing of necessary clamps, complete Stay set and other accessories. All material shall be supplied by the Contractor. |
| 43 | Ordinary earthing of pole by MS earth Rod 2500 mm long & GI strip of size 40x5 mm as per RESPO Schedule. Earth rod, GI strip, nut bolts shall be provided by the contractor. |
| 44 | Fixing and Installation of 11 KV XLPE cable jointing kit O/D type. (Onlyjointing kit O/D/St provide by the department) |
| 45 | Provinding, fabrication and fixing of DO Fuse Set. |
| 46 | Provinding and fixing of 11 TPMO Set with Plolymer insulator. |
| 47 | Grouting of pole with the help of Cement, Course sand and brick ballast. |
| 48 | Painting of pole by two coat of red oxide and two of Al. Enamel paint. (All material arranged by the contractor) |
| 49 | Installation & commissioning of 11/0.4 KV 250 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Pieceproviding and fixing of Al crimping Lugs ,all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor) |
| 50 | Installation & commissioning of 11/0.4 KV 400 KVA T/F including its connection from 11 KV line and LT line mounting of copper L-Pieceproviding and fixing of Al crimping Lugs, all material provide by department except nut bolt and copper L-Piece.(All the material except transformer will be arranged by the contractor) |
| 51 | Dismantling of existing 160 KVA T/F by Opening of all the HT/LT Connection and its safe carriage upto JE Dump store /ESC Daliganj. |
| 52 | GST will be paid extra as per rule. |
AI Tender Summary
Tender Timeline
Sep 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender