Providing Furniture To Regional Port Office Building At Khardanda, Bandra, Mumbai Suburban-Item No. 1: Providing And Laying Cast In Situ / Ready Mix Cement Concrete In M20 Of Trap Metal For Bed Blocks, Foundation Blocks And Such Other Items Including Bailing Out Water, Plywood / Steel Formwork, Laying / Pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing Uneven And Honeycombed Surface And Curing Etc. Complete. The Cement Mortar 1:3 Plaster Is Considered For Rendering Uneven And Honeycombed Surface Only. Newly Laid Concrete Shall Be Covered By Gunny Bag, Plastic, Tarpaulin Etc. ( Wooden Centering Will Not Be Allowed. ) , With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer / Concrete Batch Mix Plant ( Pan Mixer ) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) Item No. 2: Providing Second Class Burnt Brick Masonry With Conventional / I.S. Type Bricks In Cement Mortar 1:6 In Superstructure Including Striking Joints, Raking Out Joints, Watering And Scaffolding Etc.Complete Item No. 3: Providing Sand Faced Plaster Externally In Cement Mortar Using Approved Screened Sand, In All Positions Including Base Coat Of 15 Mm Thick In Cement Mortar 1:4 Using Waterproofing Compound At 1 Kg Per Cement Bag Curing The Same For Not Less Than 2 Days And Keeping The Surface Of The Base Coat Rough To Receive The Sand Faced Treatment 6 To 8 Mm Thick In Cement Mortar 1:4 Finishing The Surface By Taking Out Grains And Curing For Fourteen Days Scaffolding Etc.Complete. Item No. 4: Providing Internal Cement Plaster 12Mm Thick In Single Coat In Cement Mortar 1:4 Without Neeru Finish To Concrete Or Brick Surfaces, In All Positions Including Scaffolding And Curing Etc. Complete. Item No. 5: Providing Neeru Finish To Plastered Surfaces In All Positions Including Scaffolding And Curing Etc. Complete. Item No. 6: Providing And Laying Vitrified Mirror / Glossy Finish Tiles Decorative Type Having Size 590 Mm To 605 Mm X 590 Mm To 605 Mm Of 8 To 10 Mm Thickness And Confirming To Is. 15622-2006 ( Group Bla ) Of Approved Make, Shade And Pattern For Flooring In Required Position Laid On A Bed Of 1:4 Cement Mortar Including Neat Cement Float, Filling Joints, Curing And Clearing Etc. Complete. Item No. 7: Providing And Laying Antiskid Ceramic Tiles Of Approved Quality Of Size 30 Cm 30 Cm And Confirming To Is 15622-2006 Group-B Iia ) For Antiskid Flooring In Required Position Laid On A Bed Of 1:4 Cement Mortar Including Cement Float, Filling Joint With Cement Slurry Cleaning Curing Etc. Complete. Item No. 8: Providing And Laying Ceramic Tiles Having Size 30 Cm. X 45 Cm. Confirming To Corresponding I.S. For Dado And Skirting In Required Position With Readymade Adhesive Mortar Of Approved Quality On Plaster Of 1:2 Cement Mortar Including Joint Filling With White / Colour Cement Slurry Cleaning Curing Etc. Complete. Item No. 9: Providing And Laying Telephone Black / Amba White / Cadburybrown / Ruby Red / Ocean Brown Granite Stone Of 18 To 20 Mm Thick For Door Frame / Dado / Window Boxing Etc. On C.M. 1:6 Including Filling Joints With Polymer Base Filler Nosing The Sharp Edges Wherever Necessary, Curing, Etc. Complete. Item No. 10: Providing And Fixing C.P. Bib Cock With Wall Flange Jaquar Or Equivalent Make Continental ( Cat.No. Con-047 ) Including Necessary Sockets / Union Nut Etc. Complete. Item No. 11: Providing And Fixing 10 Cm Pvc Nahani Trap With Grating Etc. Complete. Item No. 12: Providing And Fixing On Walls / Ceiling / Floor 20 Mm Dia. Cpvc Pipe With Necessary Fittings, Remaking Good The Demolished Portion Etc. Complete. Including Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same In Pwd Chowky Or As Directed Etc. Complete. Item No. 13: Providing , Laying And Fixing , Jointing Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes Or Of Equivalent Make, Manufacture As Per En 13476 Or Equivalent As Per I.S.15328 With Fittings Such A Bends, Tees, Coupler, Etc, Jointing With Rubber Lubricant Including Necessary Excavation, Trench Refilling With Selective Excavated Material Etc. Complete. Item No. 14: Providing And Fixing 450Mm X 550Mm Size Superior Type Belgium Mirror With 16Mm Dia. Nickel Plated Towel Rod Etc. Complete. Item No. 15: Providing And Applying Two Coats Of Exterior Acrylic Emulsion Paint Confirming To Corresponding I.S. Of Approved Manufacture And Of Approved Colour To The Plastered Surfaces Including Cleaning , Preparing The Plaster Surface, Applying Primer Coat , Scaffolding If Necessary , And Watering The Surface For Two Days Etc Complete. Square Item No. 16: Providing And Applying Impression 24 Carrat Luxury Paint Of Approved Make & Approved Brand Emulsion Paint To Interior Walls And Ceilings Of Approved Quality, Colour And Shade To New Surface In Two Coats, Including Sub Surface Prparation By Acrylic Putty And Acrylic Primer Coats Including Scaffolding, Preparing The Surface. Etc. Complete ( Low Voc ) . Square Item No. 17 :- Providing And Fixing Mineral Fibre Acoustical Suspended Ceiling System With Fine Fissured ( Bevelled Tegular ) Edge Tiles Of Size 15Mm Exposed Grid. The Tiles Should Have Humidity Resistance ( Rh ) Of 99%, Nrc 0.6, Light Reflectance 85%, Thermal Conductivity K = 0.052 - 0.057 W / M K, Colour White, Fire Performance Uk Class 0 / Class 1 ( Bs 476 Pt - 6 &7 ) In Module Size Of 600 X 600 X 16Mm , With Recycled Content Of 31 %. The Tile Shall Be Laid On Precoated G.I Channel Height Of 32 With 15 Mm Wide T -Section Flanges Colour White Having Rotary Stitching And Xl2 Clip On All T Sections I.E. The Main Runner, 1200 Mm And 600 Mm Cross Tees With A Web Height Of 32Mm And A Load Carrying Capacity Of 7.57 Kilograms / M2 And Pull Out Stength Of Minimum 100 Kilograms.The T Sections Have A Galvanizing Of 90 Grams Per M2 And Need To Be Installed With Suspension System. The Tile And Grid System Used Together Should Carry A 10 Year Warranty. Product Approved In Griha And Bs 476 Etc. Complete. Item No. 18 :- Providing And Fixing Pergo Original Mort Hand Wearing Laminate Or Equivalent Flooring With Excellent Propoerties Long Life Time Original Floor Planks Should Be Joint Together All The Groove Etc. Item No. 19:- Providing And Erecting Nylon / Polypropylene / Polyethylene Dust Net Along The Periphery Of Area Under Repairs, Stitching Of Adjoining Nets With Each Other And Maintaining The Same During Repairs To Control Debris & Dust From Spreading Beyond Construction Work Including Removing And Disposal Of The Net After Completion Of Work Etc. As Directed By Engineer In Charge. Number Item No. 20: - Executive Table @ 2250Lx1050dx750ht Providing And Fixing Of Modular Table With Fixed Pedestal Having 2 Book Drawers And 1 File Drawer. Table Top Shall Be Made Of 25Mm Thick Marine Ply ( Is 710 : 2010 ) , Fire Retardent Laminate On All Sides / Surfaces. Sides In 25Mm Marine Ply ( Is 710 : 2010 ) . All Boards Components Like Top, Sides Etc. Are Finished With 2Mm Thick Machine Pressed Pvc Edge Banding In Matching Colour. Rehau Make / Or Equivalent ) For Better Impact Resistance. Other Components Like Modesty Panels Of 600Mm Height ( Apron ) Shall Be Made 18Mm Thick Marine Ply ( Is 710 : 2010 ) In Approved Colour And Shade As Per Pre-Approved Sample Etc. Complete. Fixed Pedestral Unit:- Width Of Drawer Unit Shall Be Of Standard Size Of 450Mm. Drawer Tray Shall Of 18 Mm Thk Commercial Plywood Is 303 : 1989 ) Completely ( Bottom Included ) Size Suitable To Accommodate Telescopic Glides For Smooth Operation All Visible Edges Drawer Trays Shall Have 2Mm Thk Edge Banding To Match The Colour Of The Fascia. Inside Edge Of Trays Shall Have 0.8Mm Thk Pvc Edge Banding To Match The Colour Of The Tray. Front Central Lock To Be Provided For Locking All Drawers. Aluminium Furniture Feet – Round Tube, Diameter 40 Mm With 10 Mm Height Adjustable With Steel Mounting Plate With Suitable Finish To Match Handles, C Shape Ss Brush Finished Handles As Indicated In The Drawing, Suitable Locking Etc. Complete. Key Board Tray -Size: - Width: 600Mm, Depth: 270, Height: 70Mm Keyboard Pullout Tray Made Up Of Durable Abs ( Acrylonitrile Butadiene Styrene ) Material Provided Withsliding Telescopic Channels. The Tray Hanged Below The Top By Steel Ms Brackets. Finish: All Steel Components Should Be Epoxy Powder Coated With Seven Tanks Anti Corrosion Pre-Treatment Of Surface. Abs Wire Managers To Be Provided Wherever Required For The Table Top. Cpu Trolley: Size: - Width: 180Mm Depth: 245Mm, Height: 210Mm Made Up Of Press Formed Ms Cr Sheetfinish Provision For Height & Width Adjustment. All Steel Components Should Be Epoxy Powder Coated With Seven Tanks Anti Corrosion Pre Treatment Of Surface. ( Coating Thickness 50 To 60 Micron ) . Item No. 21:- Staff Table @ 1500Lx750dx750ht Providing And Fixing Of Modular Table Of Required Size. Table Top Shall Be Made Of 25Mm Thick Marine Ply ( Is 710 : 2010 ) , Fire Retardent Laminate On All Sides / Surfaces. Sides In 25Mm Marine Ply ( Is 710 : 2010 ) . All Boards Components Like Top, Sides Etc. Are Finished With 2Mm Thick Machine Pressedpvc Edge Banding In Matching Colour. Rehau Make / Or Equivalent ) For Better Impact Resistance. Other Components Like Modesty Panels Of 600Mm Height ( Apron ) Shall Be Made Of 18Mm Thick Marine Ply ( Is 710 : 2010 ) In Approved Colour And Shade As Per Pre-Approved Sample Etc. Complete Key Board Tray -Size: - Width: 600Mm, Depth: 270, Height: 70Mm Keyboard Pullout Tray Made Up Of Durable Abs ( Acrylonitrile Butadiene Styrene ) Material Provided Withsliding Telescopic Channels. The Tray Hanged Below The Top By Steel By Ms Brackets. Finish. All Steel Components Should Be Epoxy Powder Coated With Seven Tanks Anti Corrosion Pre- Treatment Of Surface. Abs Wire Managers To Be Provided Wherever Required For Table Top Cpu Trolley : - Width: 180Mm Depth: 245 Mm, Height: 210Mmmade Up Of Press Formed Ms Cr Sheet Finish Provision For Height & Width Adjustment. All Steel Components Should Be Epoxy Powder Coated With Seven Tanks Anti Corrosion Pre- Treatment Of Surface. ( Coating Thickness 50 To 60 Micron ) . Item No. 22: Conference Table @ 3600Lx1400dx750ht Providing & Fixing Of Main Table @ 3600Lx1400dx750ht - Made Up Of 18+18Mm Thick Mdf Top With Pvc Membrane Finish And Waterfall Edge Profile. Aluminium Anodizied Finish Beeding Of 4Mm Thich Is Running All Over The Table Top Edge. Gable Ends Is Aerofoiled Shape With Front Edges In Pvc Membrane Finish And Rest In Prelaminated Mdf With Batton Structure. Gable Ends Should Be Hollow From Inside For The Provision Of Passing Electrical And Data Wiring. , Modesty Panel:- To Be Made Of 18 Mm Thick Prelaminated Particle Board With Pvc Edge Band Access Flap:- For Wire Manager 2 Nos. Item No. 23: Providing & Arrangemnt Of High Back Chair - Tilt Mechanism With Multilocking, High Density Cushion On Seat Composite Leather With Metallic Silver Finish Base And Arms With Powder Coated With Seven Tanks Anti Corrosion Pre- Treatment Of Surface. Abs Wire Managers To Be Provided Wherever Required For Table Top Cpu Trolley : - Width: 180Mm Depth: 245 Mm, Height: 210Mmmade Up Of Press Formed Ms Cr Sheet Finish Provision For Height & Width Adjustment. All Steel Components Should Be Epoxy Powder Coated With Seven Tanks Anti Corrosion Pre- Treatment Of Surface. ( Coating Thickness 50 To 60 Micron ) . Item No. 22: Conference Table @ 3600Lx1400dx750ht Providing & Fixing Of Main Table @ 3600Lx1400dx750ht - Made Up Of 18+18Mm Thick Mdf Top With Pvc Membrane Finish And Waterfall Edge Profile. Aluminium Anodizied Finish Beeding Of 4Mm Thich Is Running All Over The Table Top Edge. Gable Ends Is Aerofoiled Shape With Front Edges In Pvc Membrane Finish And Rest In Prelaminated Mdf With Batton Structure. Gable Ends Should Be Hollow From Inside For The Provision Of Passing Electrical And Data Wiring. , Modesty Panel:- To Be Made Of 18 Mm Thick Prelaminated Particle Board With Pvc Edge Band Access Flap:- For Wire Manager 2 Nos. Item No. 23: Providing & Arrangemnt Of High Back Chair - Tilt Mechanism With Multilocking, High Density Cushion On Seat Composite Leather With Metallic Silver Finish Base And Arms With Item No. 27:- Providing And Supplying Modular Cupboard Made Up Of Size 900Mm X 450Mm X 1950 Mm. Top Made Of 25Mm Marine Ply ( Is 710 : 2010 ) , Having Post Formed Decorative Laminate Of 0.8Mm On Top And Fire Retardent Laminate On All Sides / Surfaces Etc.Complete. Sides, Sides In 25Mm Thk Marine Ply ( Is 710 : 2010 ) . Adjustable Shelf Made In 25Mm Thk Marine Ply ( Is 710 : 2010 ) Placed On Standard Shelf Pins Etc. Complete.Storage Back Made Of 9Mm Thick Marine Ply ( Is 710 : 2010 ) Etc. Sides, Shutters, Bottom, Adjustable Shelf, Finished 2Mm Thick Machine Pressed Pvc Edge Banding Of Required Size Etc. Hardware Set To Include 110 Degree Opening Self- Closing Box Hinges, Counter Sunk Screw, S.S.Brush Finished, Handles L’ Clips Selves Support Etc. Complete. Multipurpose Lock, Levelling Bolt With Inserts Etc. Complete. Aluminium Furniture Feet – Round Tube, Diameter 40Mm With 100 Mm Height With Suitable Finish To Match Handles’ Shape Ss Brush Finished Handles As Indicated In The Drawing, Suitable Locking Provision Etc. Complete. 26, 082.00 Item No. 28:- Providing And Fixing Wall Paper / Graphic For Highlighting The Walls With Proper Adhesive In Line Level For Reception, Conference& Auditorium Rooms And Wherever Required As Per The Drawings.Basic Rate Of Wall Paper Is Rs..100 / - Per Sft. Make - Ddecor / 2, 360.00 Item No. 29: Providing And Fixing 3.5 To 4 Mm Thick Veneer Finish Wall Panaling Made Out Of 50 X 25 Mm ( Finished Size ) C.C.T.W. Frame Work Or Size Of 600 X 600 Mm Center Or As Per Site Condition Covered By 6 Mm Thick Bwp Plywood Of The Generally Confiriming To I:S 710-1980 Finished With 3.5 To 4 Mm Thick Matching Veneer Of Approved Color And In Satin Wallnut Groov Matched Veneer Pattern And Design Including Melamine Polishing & Design With Antitermite Treatment Etc. To Plywood And Woodwork With Ten Years Guarantee Bond Etc. Including All Lead And Lifts Complete As Per Architects Drawing And Instructions Of Engineer Incharge. Item No. 30: Providing & Applying Frosted Film Manufactured By 3 M Approved Equivalent Glass Partition. Item No. 31: Supplying & Fixing Glass 12Mm Thick On Table Top At The Locations As Directed By Engineer In Charge Item No. 32: Providing And Supplying Visitor Chair Having Size Depth- 62Cm, Width-55Cm, Height-80Cm & Seat Height 45 Cm. ( + / - 2Cm ) , Having Seat & Back, Shall Be Made Up Of 1.2 Cm Hot Pressed Plywood, Approved Tapestry Upto Rs.300 / M And Mould Polyurethane Foam With P.V.C. Lipping All Around Etc. Complete. The Chair Shall Be Provided With Two One Piece Armrest Made Of Polypropylene. The Chair Shall Be Supported By Cantilever Type Powder Coated Tubular Frame Dia 2.54Cm X 14B G M.S.E.R.W. Tube. All Aluminium Steel Component Shall Have Epoxy Polyster Powder Coated. The Chair Shall Be Ergonimc Dry Film Thickness Shall Be More Than 45 Micron. And As Directed By Architect In Charge. The Over All Appearance Of The Product Shall Be As Per Photograph. All Metal Work Shall Be Epoxy Polyster Powder Coated And As Directed By Architect In Charge. Item No. 33: L - Shape Workstation Table Top With Onegable End Support @ 1500 X 600 And 900 X 600: Providing Table Top Of Required Size Fixed At A Standard Table Top Height Of Upto750mm Min ( Including Table Top Thickness ) . Table Top Shall Be Made Of 25Mm Thick Marine Ply ( Is 710 : 2010 ) , Fire Retardent Laminate On All Sides / Surfaces. All Edges Of The Work Surface Shall Be Provided With Machine Pressed Pvc Edge Banding Of 2Mm Thickness Etc. Complete. Table Top To Be Principally Mounted From The Partition Frame With Suitable Ms Powder The Partition Frame. Gable End Supports Of Approved Profile And Design Between Tables Consisting Of 18Mm Marine Ply ( Is 710 : 2010 ) Panels Duly Edge Bound ( To Be Integrated With The Partition. Adjustable Levellers To Be Provided To Supports. ) Etc. Complete Key Board Tray - Size: - Width: 600Mm, Depth: 270, Height: 70Mm Keyboard Pullout Tray Made Up Of Durable Abs ( Acrylonitrile Butadiene Styrene ) Material Provide With Sliding Telescopic Channels. The Tray Hanged Below The Top By Steel Msbrackets. Finish: All Steel Components Should Be Epoxy Powdercoated After Seven Tanks Anti Corrosion Pre-Treatment Of Surface. Abs Wire Managers To Be Provided Where Required For The Table Top Cpu Trolley: Size: - Width: 180Mm Depth: 245Mm, Height: 210Mm Made Up Of Press Formed Ms Cr Sheetfinish Provision For Height & Width Adjustment. All Steel Components Should Be Epoxy Powder Coated After Seven Tanks Anti Corrosion Pre-Treatment Of Surface. ( Coating Thickness 50 To 60 Micron Item No. 34: Supplying Plastic Dustbin Of 10 Litres Capacity. Item No. 36: Wooden Partition: Providing And Fixing Partitions Made Up Of Cctw Frame Of Size 75 Mm X 50 Mm At 60 Cm C / C With 9 Mm Thick Commercial Ply And 4Mm Thick Veneer On Both Sides With French Polish Etc. Complete Item No. 37: Sofa Set 3+1+1 Providing & Fixing Sofa Set 3+1+1 Brown And Cream Leather Dimension Length: 182.5 ( Cms ) Breadth ( Cms ) : 100 ( Cms ) Height ( Cms ) : 100 ( Cms ) Weight ( Kilograms ) : 66 ( Kilogram ) Seating Capacity: Five Seat Item No. 38: Providing And Fixing Country Cut Teak Wood Double Or Single Leaf Panelled Shutters, 35 Mm Thick Style Top And Freze Rail 95 X 35 Thick With Lock And Bottam Rail 195 X 25 Mm Thick And Panels Without Entilator As Per Detailed Drawing Excluding The Door Frame, Stainless Steel Fixtures And Fastening And Finishing The Wood Work With Oil Painting 3 Coats Complete Item No. 39: Supply And Installation Of Dpi Flux Translucent Roof With Standing Seam Multicell Polycarbonate Panel System. The System With Complete Assembly Of Co Extruded Uv Protected Multicell Panels Incorporated Into A Complete System. Co-Extruded Uv Protected Polycarbonate Panel System Of Min Mm Thick Of 1200Mm ( Min. ) Width With Angular Daylighting Concept. Panels Shall Have Minimum Seven Layers In A Truss Bridge Design Higher Flexibility & Strength. Panels With Opaque And Translucent Clear Combination As Per Required Lux Level And Design Requirements With All Fixing Accessories To Ensure Best Performance For Wind Uplift, Vibration, Oil Canning And Visual Appearance. Panels Shall Have An Additional Ir Blocking Features For Enhance Thermal Comfort. Panels Shall Be Manufactured With Vertical Standing Seam At Both Sides Of The Panel. Panels Shall Be Fixed On Purlin With Snap On Connectors With Double Tooth Grip Lock Locking Mechanism And Will Be Secured On Ms Structure ( Will Be Paid Separately ) With 3 One Numbers Self-Drilling Screws & Trapezoid Ss Fasteners Holding The Base Of The Standing Seam Offering Best Stability Having A Pull-Out Load Of Min. 7000N 7Kn ) Tested As Per Iso 6892:1998 And Is 1608: 2005, As Per Design Requirement. Panels Must Satisfy Dart Drop Impact Test As Per Is 14443-97 Shall Show No Sign Of Breakage On Polycarbonate Sheets Which Have Been Exposed To Uv For A Min. Of 500 Hours As Per Astm G 155. Panels Shall Not Have Yellowness Index As Per Astm D 1925 Of 15 Units When Tested On A Sample Exposed To Uv For 500 Hours As Per Astm G 155. U Value Shall Not Be More Than 1.9 W / M2k As Per En Iso 10077-2:2018. Panel Shall Be With Additional End Cap / Aluminium U / F Profile / Glazing Bar For Ends As Required. Panel Shall Be Fixed Over Ms Structural Steel / Ms Purlin ( Paid Separately ) Conforming To The Detail Technical Specifications As Per Approved Architectural Drawings. Trained And Factory Authorized Labour With Supervision To Complete The Entire Panel Installation As Per Drawing & Direction Of The Engineer In Charge. Colour: As Per Approval The 16Mm Thick Panels Shall Be Used For A Roofing Height Of Upto 15 Mtrs. Item No. 40:- Side / Back Credenza @ 1500 X 500 X 750Mm:Providing And Supplying Modular Side / Back Credenza Made Up Ofrequired Size. Top Made Of 25Mm Marine Ply ( Is 710: 2010 ) , Having Post Formed Decorative Laminate Of 0.8Mm On Top And Fire Retardent Laminate On All Sides / Surfaces. Sides, Sides In 25Mm Thk Marine Ply ( Is 710 : 2010 ) . Adjustable Shelf Made In 25Mm Thk Marine Ply ( Is 710 : 2010 ) Placed On Standard Shelf Pins. Storage Back Made Of 9Mm Thick Marine Ply ( Is 710 : 2010 ) Etc. Complete. Sides, Shutters, Bottom, Adjustable Shelf, Finished 2Mm Thick Machine Pressed Pvc Edge Banding Of Required Size Etc. Hardware Set To Include 110 Degree Opening Self- Closing Box Hinges, Counter Sunk Screw, S.S.Brush Finished, Handles L’ Clips Selves Support. Multipurpose Lock, Levelling Bolt With Inserts Etc. Complete Aluminium Furniture Feet – Round Tube, Diameter 40 Mm With 100 Mm Height With Suitable Finish To Match Handles’ Shape Ss Brush Finished Handles As Indicated In The Drawing Provided By Architect, Suitable Locking Provision. Execution Of This Item Should Item No. 41:-Dining Table @ 1800 X 1000 X 750 ( 6 Seater ) : Providing And Fixing Dining Table Of Overall S.S ( Is 6911:1992 ) , Grade Of Steel 304, Thickness Of The Table Is 40 Mmstructure Top To Be Of S.S 18 Swg 304, Grit. Under Structure To Be Vertical Poles Of 50 Mm Dia ( 16 Gauge 304 Grade ) And Top And Bottomsupporting Frame Structure To Be 50 X 50 Mm Square Tube Etc. Complete. Glide Shall Be Of Plastic Fixed At The Under Structure To Prevent The Damage Of Table Top During Stacking. Legs Shall Be Of Ss And 38 Mm Dia ( 16 Gauge 304 Grades ) . Pipe Legs Are Fixed With Under Structure And Table Top Etc. Complete. Item No. 42:-Dining Chair: Providing And Fixing Ss ( Is 6911:1992 ) Grade Of Steel 304 Dinning Chirs For Dining Hall And Dining Room Area As Per The Drawing Or Approved Size And Shape Including All Lead Lift Shiftingto Work Location Etc. Complete Item No. 43:-Single Bed @ 2025Lx 1000Dx 650H Providing And Fixing Single Bed Of Size 2025Lx1000dx650h With Matress And Pillow. Understructure: - The Legs Are Made Of Square Tube Of Size 25 X 25Mm Made Out Of Ms With A Thickness Of 1.2 Mm. The Legs Should Have Corner Brackets Welded To It At Two Levels. The Corner Brackets Are Made Of 2Mm Thick Crca Having A L Shaped Structure To Join The Side Panels And Headboard To The Leg. Three Nos. Of Horizontal Stiffeners Are Provided At Equal Intervals. The Stiffeners Are Made Of Square Tube Of Size 25 X 25Mm Made Out Of Ms With A Thickness Of 1.2Mm. The Middle Horizontal Stiffener Has A Leg Attached To It To Transfer The Load To The Ground And Add To The Strength And Stability Of The Complete Structure. This Leg Is Also Made Of Square Tube Of Size 25 X 25Mm Made Out Of Ms With A Thickness Of 1.2Mm. All Metal Components To Undergo 7 Tank Treatment Process And Should Be Powder Coated The Thickness Of Minimum 50 Microns Dft.Side Panel: - The Side Panels Are Made Up 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Overall Width Of The Side Panel Is 150Mm. The Side Panels Have 18Mm Thick Prelam Particle Board Baton Running For Required Length To Add Rigidity To The Structure. Head Board :- The Head Board Is Made Up Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Head Board Size To Be Considered As 1000 X 650Mm. Foot Board :- The Foot Board Is Made Up Of 18Mm Thick Prelam Particle Board With Both Side Decorative Laminate. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding. The Head Board Size To Be Considered As 1000 X 450Mm. Bed Base: - The Bed Base Is Made Up Of 12Mm Thick Prelam Particle Board With Both Side White Laminate. Item No. 44:-Pedestral Drawer Unit: Providing And Supplying Modular Pedestal Unit With 3 Drawers Of Required Shape And Size, 560 X 450 X 650 Mm Lxwxh. Top Made Of 18Mm Thick Marine Ply ( Is 710 : 2010 ) , Having Post Formed Decorative Laminate Of 0.8Mm On Top And 0.6Mm Balancing Laminate On Unexposed Face. Sides In 18Mm Both Side Prelaminate Particle Boards ( Interior Grade ) And Back Made Of 9Mm Thick Both Side Prelaminated Particle Board, Finished With 2 Mm Thick Machine Pressed Pvc Edge Band On All Edges Etc. Complete. Width Of Drawer Unit Item No. 45:-Point Wiring For Light / Fan / Bell In 20 Mm Frls Grade Hms Pvc Conduit With 1.5 Sq.Mm ( 2+1E ) Frlsh Grade Copper Wire With Flush Type Switch And Required Accessories As Per Specification No: Wg-Pw / Sw Item No. 46:-Point Wiring For Independent Plug 20 Mm Frls Grade Hms Pvc Conduit With 1.5 Sq.Mm ( 2+1E ) Frlsh Grade Copper Wire, Flush Type Switch, Earthing And Required Accessories As Per Specification No: Wg-Pw / Sw Item No. 47:-Supplying And Erecting Led Square / Circular Max. 18 W Down Lighter / Panel Light Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 2000 Lumens, Min. Efficacy Of 110 Lumen / W, Cri>80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd<10%, P.F. 0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50, 000 Hrs. L70b50, Including Driver, Having Mounting Arrangement With Board For Surface Type Or Spring Loaded Mounting Clips Complete With 3 Years Warranty. Item No. 48:- Supplying And Erecting Mains With 2X2.5 Sq.Mm Frlsh Copper Pvc Insulated Wire Laid In Provided Conduit / Trunking / Inside Pole / Bus Bars Or Any Other Places. As Per Specification No: Wg-Ma / Bw Item No. 49:- Wiring For Plug On Board With Switch Socket Concealed Type, Copper Wiring And Earthing And With Modular Accessories As Per Specification No: Wg-Pw / Cw Item No. 50:- Supplying And Erecting Single Pole And Neutral Distribution Board ( Spndb ) Surface / Flush Mounted With 2 Ways For Incoming And 6 Ways For Outgoing Sp Mcb’S On Iron / Gi Frame As Per Specification No. Sw-Swr / Mcbdb Item No. 51:- Supplying And Erecting Modular Type Switch 6A / 10A Duly Erected On Provided Plate And Box With Wiring Connections Complete. Item No. 52:- Supplying And Erecting Unbreakable Concealed Type Modular Switch Box With Double Mounting Plate For 8 Module Duly Erected Flush To Wall With Required Chiselling And Finishing With Cement Mortar Pop As Per Required To Match The Background Item No. 53:- Supplying, Erecting & Terminating Fr Xlpe Insulated, Galvanised Steel Formed Wire Armoured ( Strip ) Cable 1100 V, 4 Core 16 Sq. Mm. Copper Conductor Complete Erected With Glands & Lugs, On Wall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No. Cb-Lt / Cu Item No. 54:- Supplying & Erecting Frp Box Of Size 300 X 200 X 125 Mm, 2.7 Mm Thick Complete On Pole / Wall As Per Specification No. Cb-Sb Item No. 55:- Supplying Single Door Refrigerator Domestic Type Of 170 To 195 Litres Storage Capacity, Minimum 5 Star Inverter Type, Stabilizer Free Operation Suitable For Operation On 100V / 300 V, 50 Hz With Automatic Temperature Control, Shall Be Marked On Unit For Sealed Unit In Refrigeration System And Marking Sr. No. And Date Of Erection Complete ( Make- Samsung, Lg, Whirlpool, Godrej Etc. ) Item No. 56:-Supplying And Erecting Ultra Violet Storage Type Water Purifier ( Ro+Uv+Uf ) With Softener For Safe Drinking Water Consisting Of Uv Germicidal Tube Of 8W Capacity Choke Made Of Copper Wire And Two Indicator Lamps With Output Of Purified Water Minimum 0.33 Litre / Min With Activated Carbon Filter And Softener Operating On 230V, Single Phase A.C. Supply With Uv Fail & Filter Change Indication System . ( For Tds More Than 200 ) ( Make- Aquagaurd, Tata, Kent, Eureka Forbes Etc. ) Item No. 57:-Supplying, Installing, Testing & Commissioning Split Type Variable Speed Inverter Technology With Minimum 3 To Convertible Mode For Compressor, Room Air Conditioning Unit 1.0Tr To 1.2Tr Capacity Having Iseer Minimum 3.8 To Maximum 4.39 Suitable To Operate On 250V, 50 Hz, A.C. Supply Having 1 No Of Air Handling Unit Hi-Wall / Floor Mounting Type Complete With Refrigerant R32 Having Copper Condenser, Minimum 2.5Pm Filter, Self Diagnosis Feature, Stabilizer Free Operation & Temperature Display On Indoor Unit, Noise Level Maximum 50Dba At Position As Per Specification No. Apac / Wac. ( Make- Bluestar, Voltas, Samsung, Lg Etc ) Item No.58:- Calculate Quality Control Tests As Per Mentioned In Ssr ( P386 ) Compressive Strength Of Concrete Cubes Bricks:- Water Absorption ( Set Of 5 Bricks ) , Compressive Strength ( Set Of 5 Bricks ) , Plywood: Determination Of Resistance To Dry Heat, Determination Of Moisture Content, Determination Of Density, Thickness Of Plywood, Test For Glue Adhesion Flooring Tiles:- Flexural Test, Water Absorption, Resistance To Wear ( Set Of 6 Tiles )
