Tata Memorial Centre has published Tender For Installation Of Glass Door, Exhaust System And Outside Development Work For Cafe Raga At Actrec. Submission Date for this Tender is 03-10-2023. Ceiling Fan Tenders in kharghar Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm or more on plan including getting out and disposal of excavated earth within the ACTREC Campus and/or spreading soils in layers for site development.as directed by Engineer-in- Charge: All kinds of soil |
| 2 | CAFÉ Raga Metallic Signage as per the drawing and design |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,frames (Steel or wood), architrave, holdfasts, door closer, etc. complete and stacking in the scrap yard all complete. For any type of door (double or single). Measurment per door and not each leaf of door. |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | 15 mm cement plaster of mixfor wall with ready mix plaster wherever required as per the instructions of Engineer incharge |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. - 100 mm nominal dia Pipes |
| 7 | Providing & Applying one / two coatsof primer & thereafter two coats of paint as mentioned First quality to the required colour scheme and as per manufacturers instructions / specificationsto the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and levelling with waterproofputty / plaster of paris of necessary to obtain smooth surface etc. complete job including removal of stains, painting spots on floors,aluminium window frame & glassetc asto the entire satisfaction of engineer in charge :With Luster Paint two coats of primer and two coats ofpaint. ( Rate inclusive of scafflolding, labour charges, ladder etc.) |
| 8 | Providing and Applying and Levelling the existing surface with Birla White Cement based/ Coloured waterproof Putty of average thickness of2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Material, Labour Charges) Etc. Only to be applied at distressed areas and newly plastered surface as per the instruction of Engineer incharge. |
| 9 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws this is as , excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood - 40-42mm thick shutter. Melamine polish as per the instruction included in the rate. |
| 10 | Glass panelling with 12mm thick toughened glass with installation of designer frosted film as per the instruction of Engineer incharge. |
| 11 | Providing and fixing chain type guard railing with designer metal post at 1 to 2m interval (as per the instruction) with ACTREC embossing on the post. All metal surface to be coated with anti-corrosive material and then enamel painting shall be done of approved colour. The post shall be firmly fixed to the ground with base plate embedded in concrete with concealed fixing of post. The railing shall be welded to the post all complete as per the instruction of Engineer incharge and as per the image provided in the tender. |
| 12 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 13 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length with Melamine polish including all as per the instruction of Engineer incharge |
| 15 | Dry stone rubble soling/pitching of 150 mm to 250mm size shall be approved quality, hard, free from cracks, durable, preferably black trap. Rubble shall be laid on leveled base close to give compact, surface. If base is not properly leveledsame will have to be done without any extra cost. Voids in the joints shall be filled with selected chips. A sample of paving shall be prepared and got approved before proceeding ahead. After stones are laid with thickness of 200mm and packed with chips, sandshall be spread and watered to fill remaining voids. Sandshall be allowed to go into joints till final packing is obtained. Rate quoted shall be for materials, labour, watering, leveling site, before paving, consolidating etc. complete. |
| 16 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard settingof concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Concrete of M15 grade with minimum cement content of 240 kg /cum |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, shuttering, placing in position and binding all complete upto plinth level.Twisted steel/ deformed TMT bars Fe-500D |
| 19 | Bolts and nuts up to 300 mm in length |
| 20 | Providing and fixing of heavy-duty Outdoor vitrified Matt/Antiskid finish tiles are a flawless blend of elegance and durability. Maintaining all the vital parameters namely surface hardness (Moh), breaking strength (Mor), Load Bearing Capacity. Thickness-14mm, water absorption-<0.10%, size- 60x60cm including providing of 15-20mm thick 1:3 cement mortar for laying of tiles. |
| 21 | Designing, fabricating, testing, installing and fixing in position Wall with Aluminium Composite Panel Cladding, with silicon sealant for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in wood as well as metallc colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant,backer rods etc all complete as per the instruction of Engineer incharge. |
| 22 | Supply, installation ,testing & commissioning the following cable on wall/floor/ceiling/structure member or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect. Cable, conforming to IS: 1554/Part 1/1998, XLPE, copperconductor, armoured, 1100 V class |
| 23 | 4Cx6 Sq.mm 2XFY Copper Conductors armoured including glands , lugs andend connections |
| 24 | 4Cx2.5 Sq.mm 2XWY Copper Conductors armoured including glands , lugs andend connections |
| 25 | Supplying and fixing following ratings 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles including metal enclosure box , earthing and fixing accessories with connections,Testing and commissioning etc. as required. As per technical specifications in tender. |
| 26 | SITC of 32 Amps4 poleMCB C Curve + Earth including metal enclosure box |
| 27 | Supply ,Installation,Testing & Commisioning of LED shaped 18 Watt - 22 Watt or equivalent Premium Range Recessed Downlighter having pressure die-cast aluminimum housing / CRCAhousing with white front bottom frame suitable to following features. - Luminaires suitable to Aluminium metal grid ceiling or Gypsum or POP, -Minimum System Lumen output 1800 / 2200lumens -In built electronic LED pre wired driver, -Luminaire shall be with special translucent --High Surge Protection:-2.5kV. -Highdiffuser>85%, -Provision of Spring loaded Mounting clips. -Opal Translucent cover/Poly Carbonate reflector. -CRI>80,THD<10%. -High Efficacy gretaer than or equal to 100 lm/watt, -Provide Uniform low glare lighting non yellowing/PMMA lens for better light distribution, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 4000K. Warrantee of 2 years to be provided. |
| 28 | SITC of 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.for concealed fixing the civil work required , final finishing and painting as per actual is in the scope of agency |
| 29 | Supply & Fixing of PVC Conduit pipe of following suitable size with screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc.Complete as per instructions of EIC.25 mm |
| 30 | Design, Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications and as per SMACNA standard of following sheet thickness complete as required. Hot dipped Galvanised with 120GSM Zinc coatingThe price shall include necessary scaffolding required for working at required height. |
| 31 | Thickness: 0.63 mmSheet |
| 32 | Supply, installation, testing and commissioning of GI volume control duct damper/Non Return damper 18 guage GI. frame & 20 guage GI blades complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. |
| 33 | Removable type Birds screen/wire mesh made out of 10 SWG MS wires at every 1” distance duly painted with red oxide and synthetic enamel as per the duct size. |
| 34 | Hood & filters |
| 35 | Design, supply, fabrication, installation of SS-304 ,18 SWG hood (size- 18" X 30")with oil filtersand lengthas per instruction of Engineer -in-charge includingsupports packing materials & hardwards, supportetc. |
| 36 | Tube axial fan |
| 37 | supply & Installation testing commissioning of 3phase, tube axial Direct driven fanshall be suitable for 65mm WG static pressure. The fan motor shall be suitable of 400V ±10% Volts, 50 Hz, 3phase ACpower supply The system shall have suitable capacity of starter panel with whether proof enclosure. , tube axial fanhaving 6000 CFM with all necessary hardware, M.s. stand & support etc. as per instruction of OIC-ES with all necessary hardware, M.s. stand & support etc. as per instruction of engineering in charge. |
| 38 | Supply & Installation of4CX2.5 sqmm copper armoured or equivelant to the exhaust fan cable asper directed & instructed by OIC-ES. |
| 39 | Supply & fixing of Fire retardant synthetic canvass connection to blower, tube axial fan and ducting with all fixing arrangement, nut bolts, hardware’s etc. as directed for above blower unit. |
| 40 | Dismantling the existing ducting, false ceilling etc with ,all supports, hard ware etc. all as per instructions as directed by OIC-ES. |
| 41 | Dismantling the existing ducting, false ceilling etc with ,all supports, hard ware etc. all as per instructions as directed by OIC-ES. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
