|
| 1 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(iii) Rajgram |
| 2 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge. In ground floor. |
| 3 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (II). Other than SAIL/ TATA/RINL |
| 4 | 125 mm thick brick work 1st class bricks in cement morter (1:4).......... |
| 5 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor ). (ii) With 1:4 cement mortar (c) 10 mm thick plaster |
| 6 | )Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).(ii) With 1:4 cement mortar (b) 15 mm thick plaster |
| 7 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)….. |
| 8 | Applying exterior grade Primer of approved quality and brand on plaster or concrete surface old or new sueface to receive decorative texture or smooth finish………. As per direction of the EIC.A) Ground floor : (iii) Two coats. |
| 9 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats |
| 10 | Applying Acrylic Emulsion Paint of approved make and brand on wall and celling including sand papering in intermediate coats including putty………..two coats(luxury quality.) |
| 11 | Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm longarms of cross section size 35 mm x 15 mm & self driven self taping screws, thevertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of0.8 mm , including providing EPDM rubber gasket weather seal throughout theframe, including jointing 5 mm PVC frame strip with PVC solvent cement onthe back of the profile. The doorframe to be fixed to the wall using 8 x100mmlong anchor fasteners complete, all as per manufacturer’s specification anddirection of Engineer -in- charge. |
| 12 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture....... |
| 13 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & inishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if ecessary or by synthetic adhesive & grout materials etc.(A) Floor , With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m , i) Coloured decorative |
| 14 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD- 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories...... complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Conceled WorkPVC Pipes ..25 mm dia |
| 15 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD- 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories...... complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Conceled WorkPVC Pipes ..15 mm dia |
| 16 | ]Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(i) 450 mm X 300 mm size |
| 17 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in whitevitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete ((ii) 470 mm X 280 mm X 340 mm |
| 18 | Supplying PVC water storage tank of approved quality with closed top with lid……….. 1000 ltr.capacity. |
| 19 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing).(ii) 530 mm X 410 mm |
| 20 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm |
| 21 | Supplying,fitting & fixing CPVC pipes of approved make conforming to IS-15778: 2007,with all necessary accessories…………..10 mm dia |
| 22 | Supplying,fitting & fixing CPVC pipes of approved make conforming to IS-15778: 2007,with all necessary accessories…………..15 mm dia |
| 23 | Supplying,fitting & fixing chromium plated rose shower with revolving joint and 150 mm long shower arm……. |
| 24 | Supplying,fitting & fixing chromium plated hand shower with flexible tube & fittings………. |
| 25 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor throughmasonry concrete, if Necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the enter line of the total pipe line in fitted condition including specials,payment for specials & Painting will be paid seperately)(a) With valamoid joints including sealing with sand cement morter (4:1)uptoquarter depth (ii) 100 mm dia. (internal) |
| 26 | Supplying,fitting & fixing best quality Exhaust Fan……….. |
| 27 | S/F fluse type 240 V 3pin 20A plug socket with 20A piano key type switch............. |
| 28 | Distribution wiring in 1.1 kv grade 2x22/0.3(1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire……….PVC casing capping on wall and vertical run & switch box both concealed. |
| 29 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3).......... |
| 30 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides,............ |
| 31 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) .......... |
| 32 | Supplying, fitting & fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq.cm. |
| 33 | Water filter (RO+UV+UF+TDS Water purifier with Minaeral…… approved brand) |
| 34 | Supplying ,fitting & fixing Display Board |
| 35 | TOTAL |
| 36 | Add GST @ 18% |
| 37 | Total |
| 38 | Add Cess @ 1 % |
