|
| 1 | Earthwork in excavation in foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Filling in foundation trenches and plinth.including ramming and watering in layers not exceeding 150 mm thick with leads and lifts including cost of all materials, labour, royalty and complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with leads and lifts including cost of all materials, labour, royalty and complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 4 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 5 | ProvidingP.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone metal grade – III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royaltyall complete as per building specification and direction of Engineer-in-charge. |
| 6 | Providing designation 75 A brick work in C.M. (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 7 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 8 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 9 | Providing 50 mm thick thick damp proof course (1:1.5:3) band at plinth level with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 10 | ProvidingR.C.C. M-200 with nominal mix of (1:1:5:3) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 11 | Providing R.C.C (1:1.5:3) in band at plinth levelith approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 12 | Providing R.C.C M-200 in nominal mix of (1:1.5:3) in column with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 13 | Providing R.C.C M-200 in nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 14 | Providing av. 63 mm thick R.C.C M-200 in nominal mix of (1:1.5:3) in chajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 15 | Providing RCCM200with nominal mix of(1:1.5:3) in beam of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I.(5.3.11) |
| 16 | Providing R.C.C M-200 in nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 17 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows E/I (5.4.1) |
| 18 | Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter …of E/I.5.4.32 |
| 19 | 25 mm thick PVC FLUSH DOOR SHUTTERSE/I. DSR9.118.3 |
| 20 | Suppliying, fitting and fixing callapsible gate of approved size and make rpopoerly fabricated with vertical double channels 20x10x2mm at 100mm centres and braced with M.S flat diagonals 20x3mm with top and bottom rails of T iron 40x40x6mm with 30mm dia, steel pulleys complete with bolts, nuts locking arrrangements, stoppers, handls, including applying a priming coat or red lead paints, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 21 | Providing Tor steel reinforcement of 8 mm,10mm etc diaE/I.5.5.5BTMT Fe 500 (Only valid for SAIL & TATA Steel) |
| 22 | Supplying, fitting and fixing 250x20x6 mm L-type M.S. clamp ...E/I. 5.5.9 |
| 23 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 24 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilatorsE/I. DSR- 21.10 |
| 25 | Providing and fixing fan hook of 16mm dia M.S. bar of E/I. (where material is not supplied by dept.)5.5.13 |
| 26 | Providing & layingrectified glazed Ceramic floor tiles of size 300mmx300mm or more ..E/I.DSR 11.39 |
| 27 | Providing and laying 6 mm precast white glazed tiles in walls... E/I.5.6.23.1 |
| 28 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 29 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 30 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 31 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 32 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 33 | Providing two coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 34 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 35 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 36 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated andgroutedwithfinesand,includingnecessaryexcavation,levelling& dressing & finishing the top smooth. |
| 37 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 38 | Cement + Steel (Lead 1 KM) |
| 39 | Sand -(Lead 8 KM) |
| 40 | Stone Chips- ( Lead 80 KM) |
| 41 | Brick - ( Lead 26 KM ) |
| 42 | Septic TankEarthwork in excavation in foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. |
| 43 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with leads and lifts including cost of all materials, labour, royalty and complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 44 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 45 | ProvidingP.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone metal grade – III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royaltyall complete as per building specification and direction of Engineer-in-charge. |
| 46 | Providing designation 75 A brick work in C.M. (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 47 | Providing 19 mm thick water proof cement plaster (1:3)with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 48 | ProvidingR.C.C. M-200 with nominal mix of (1:1:5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 49 | Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of M.S. bars to work site cutting, bending, and binding with annealed wire with cost of wire removal of rust, placing the rods in position all complete as per building specification and direction of E/I.TMT Fe 500 (Only valid for SAIL & TATA Steel) |
| 50 | C.I. cover and frame 300x300 mm inside |
| 51 | S.C.I. plain bend 100 mm dia |
| 52 | S.C.I. Tee 150 mm |
| 53 | Cement + Steel Lead 1 KM |
| 54 | Sand Lead 8 KM |
| 55 | Stone Chips Lead 80 KM |
| 56 | Brick Lead 26 KM |
| 57 | YATRI SHEDEarthwork in excavation in foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. |
| 58 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with leads and lifts including cost of all materials, labour, royalty and complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 59 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 60 | Providing P.C.C.(1:2:4) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 61 | Providing P.C.C.(1:2:4) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 62 | Providing R.C.C(1:2:4) in Tie Beamall types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 63 | Providing 75B, B/W in c.m(1:6) in fondation & plinth ....do....do all complete job. |
| 64 | Providing 50 mm thick Damp Proof Coarse (DPC) With cement concrete. M150(1:2:4) o...do...allcomplete job. |
| 65 | Providing R.C.C((1:2:4) in stiffners with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 66 | Providing R.C.C(1:2:4) in band at lintel level with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 67 | ProvidingR.C.C. (1:2:4) in chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 68 | Providing R.C.C(1:1.5:3) in Beamwith approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 69 | Providing R.C.C(1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 70 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 71 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 72 | Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips into layers bottom layer 19mm (1:2:2) with 12mm to 6 mm size graded stone chips and top layer 6mm thick (1:2) withwith 6mm down stone chips in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty all complete as per building specification and direction of E/I. |
| 73 | Providing 12mm cement plaster (1:4) with punning clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 74 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 75 | Providing 12mm cement plaster (1:4) with punning clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 76 | 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 77 | Centring and shuttering including strutting,propping etc and removal of farm Roof |
| 78 | Tie Beam :- |
| 79 | Lintel |
| 80 | Providing & fixing FAN HOOK of 16 mm dia M.S. bar, 1 M long to required size and shape placed in position and fixid in the RC.C. slab-beam at the time of casting all complete as per building specification and direction of E/.I. |
| 81 | Providing two coat of snowcem of approved shade and make over a coat of cement of primer on new surface including preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direction of E/I. |
| 82 | Carriage of materials : a. Bricks (Lead- 26 Km) |
| 83 | b. Sand (Lead-8 Km) |
| 84 | c. Stone chips (Lead-80.00 Km) |
| 85 | d. Cement & Steel (Lead-1 Km) |
| 86 | SOAKPITEarthwork in excavation in foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. |
| 87 | Providing designation 75 A brick work in C.M. (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 88 | ProvidingR.C.C. M-200 with nominal mix of (1:1:5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 89 | Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of M.S. bars to work site cutting, bending, and binding with annealed wire with cost of wire removal of rust, placing the rods in position all complete as per building specification and direction of E/I.TMT Fe 500 (Only valid for SAIL & TATA Steel) |
| 90 | Carriage of materialsCement + Steel Lead 1 KM |
| 91 | Sand Lead 8 KM |
| 92 | Stone Chips Lead 80 KM |
| 93 | Brick Lead 26 KM |
| 94 | Sanitary & Water Supply Works ItemsSupplying fitting and fixing on terrace (at all floor Level) polyethylene water storage tank I.S.I. 12701 marked with cover and suitable loking arrangment and making necessary holes for intel, outlet and overflows pipes but without fitting and the base support for tank. |
| 95 | Supplying and fixing of G.I. Pipes of Tata or any other-…………….. All complete job as per direction of E/I.15mm dia |
| 96 | 20mm dia |
| 97 | 25mm dia |
| 98 | 32mm dia |
| 99 | 50mm dia |
| 100 | Earth work in excavation (as perl. S. 3114=1965 for laying of different types and sizes of pipes…..do ….allas per direction of E/I. For calssification of soil item -B) Rs. 34.40/cum |
| 101 | Earth work in back filling ………all as per direction of E/I.Same as qty Sl No. 76/12.1.1.1 |
| 102 | Providing and fixing male ended 15mm dia brass bib cock do….allas per direction of E/I. |
| 103 | Providing and fixing brass/C.I. stop cock of approved quaility all complete as per specification and direction of E/I. BRASS STOP COCK 15mm dia |
| 104 | Providing and fixing N.P/C.P brass/P.V.C porcelain shower rose of 15 mm inlet etc all complete as per specification and direction of E/I. 150 mm dia P.V.C shower |
| 105 | Providing and fixing G.M full way valve…do all comlete as per direction of E/I25mm dia weight not less then 500 gms |
| 106 | 32mm dia weight not less then 700 gms |
| 107 | 40mm dia weight not less then 1.0 kg. |
| 108 | Providing and fixing GI fittingapproved quility all omplete job. ELBOWS15mm dia |
| 109 | 20mm dia |
| 110 | 25mm dia |
| 111 | 32mm dia |
| 112 | 40mm dia |
| 113 | TEE PLAIN15mm dia |
| 114 | 20mm dia |
| 115 | 25mm dia |
| 116 | 32mm dia |
| 117 | 40mm dia |
| 118 | REDUCING SOCKET20mm dia |
| 119 | 25mm dia |
| 120 | 32mm dia |
| 121 | 40mm dia |
| 122 | NIPPLE15mm dia |
| 123 | 20mm dia |
| 124 | 25mm dia |
| 125 | 32mm dia |
| 126 | 40mm dia |
| 127 | PLUGS15mm dia |
| 128 | 20mm dia |
| 129 | 25mm dia |
| 130 | 32mm dia |
| 131 | 40mm dia |
| 132 | REDUCING TEE PLAIN20mm dia |
| 133 | 25mm dia |
| 134 | 32mm dia |
| 135 | 40mm dia |
| 136 | UNION SOCKET15mm dia |
| 137 | 20mm dia |
| 138 | 25mm dia |
| 139 | 32mm dia |
| 140 | 40mm dia |
| 141 | SOCKET PLAIN15mm dia |
| 142 | 20mm dia |
| 143 | 25mm dia |
| 144 | 32mm dia |
| 145 | 40mm dia |
| 146 | JAMM NUT15mm dia |
| 147 | 20mm dia |
| 148 | 25mm dia |
| 149 | 32mm dia |
| 150 | 40mm dia |
| 151 | Cutting chajja or cornice for laying G.I. pipes……… all complete direction of E/I. |
| 152 | Making holes in walls for laying G.I. pipes ……… all complete direction of E/I. 250mm thick wall |
| 153 | Supplying fitting and fixing the following items complete with all materials as per direction of E/I.600x450mm mirrors of 6mm thick |
| 154 | CP brass liquid soap container medium quaility with screw and hinge etc. |
| 155 | CP brass towel rail 20 mm x 600 mm a good quaility with bracket container |
| 156 | CP brass dish container medium quaility with screw and hinge etc. |
| 157 | supply materials labour for construction of 600x600x90mm stop cock chamber of brick masonary as per direction of E/I. |
| 158 | Providing and fixing water closet squating pan (Indian type W.C.pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flushpipe, with manually controlled device (handle lever) conforming to IS:7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous China Orissa pattern W.C pan of size 580x440mm with integral type foot rests |
| 159 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern with fittings, standard size C.P brass flush pipe, spreaders with union and clamps(all in C.P brass) with waste fitting as perIS:2556, C.I trap with outlet grating and coupling in C.Pbrass, including painting of fittings and cutting and making good the walls and floors wherever required Range of four half urinal basins with 10 litre P.V.C automatic flushing cistern |
| 160 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.Cautomatic flushing cisternwith fittings standard sizG.I /P.V.C flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.Pbrass coupling complete, including painting of fittings and cutting and making good the walls and floors wherever required Range of two squatting plateswith 5 litre P.V.C automatic flushing cistern |
| 161 | Supplying fitting and fixing vitreous white glazed earthenware hand basin of parry of Hindustan or any other ISI approved make supported make supported on painted C.I. or R.S brackets 32mm C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quility of PVC/ Alkthene pipe for back and front eith apreaded fitting and brass coupling etc. |
| 162 | Cost of drilling 200mm x 165mm x 230meter deep bore well in all kinds of soil and rock in rural or any other area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools drilling rig and Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete.(Sl. No. 119)(i) From 0 – 50 meter |
| 163 | (ii) From 51 – 125 meter onwards |
| 164 | Supplying all tools, equipment, labours and doing washing, flushing and development of drillled tube well to give clean and clear water all complete as per direction E/I.(Sl. No. 126) |
| 165 | Supplyof 200 mm dia x 3.00 m long UPVC casing pipe conferming to IS:12818:2016 (CML No. 5543459) latest revision including carriage. (Basic rate ) (Sl. No. 129) |
| 166 | Supplying all materials labours, tools & equipments for fitting & fixing 200mm dia MS Cap over Pipe complete job. (Sl. No. 120) |
| 167 | Supplying all tools, equipment, labours and lowering 32 mm dia G.I suspension pipe in 3mtrs length in the drilling bore of T/W etc. all complete job as direction of E/I. (Sl. No. 132) |
| 168 | Providing labours for fitting and fixing deep well cylinder jointing materials, chrome leather bucket all tools and plant etc .required for the job for low water levelall complete job as per specification anddirection of E/I.(Sl. No. 133) |
| 169 | Providing all labours for fitting and fixing of India Mark IIHand pump including supplying all tools and plants required for the alljob complete as per specification and direction of E/I.(SOR Sl. No. 137) |
| 170 | Supplying all materials, labours and equipment for constructing PCC (1:2:4) circular platform around each drilled T/w including 12mm thick cement plaster (1:4) With neat 1.5 mm cement punning over exposed surface as per UNICEF design etc. all complete job.(SOR Sl. No. 129) |
| 171 | Supplying all materials, labours and equipment for constructing PCC (1:2:4) drain as per UNICEF design etc. all complete job.(SOR Sl. No. 130) |
| 172 | Cost of one no. of ISI marked India Mark II extra deep hand pump confirming to IS: 15500 (Part II)/2004 with latest amendment complete with all accessories including 8 Nos. of connecting rod. Including all taxes, royalty and contractor profit etc.(SOR Sl. No. 131) |
| 173 | Cost of 32mm dia. G.I. Medium quality pipe 3Mtrs long screwed at both ends with seamless socket as per IS: 1239 (part-1 to 8)/2004 with latest amendmentIncluding all taxes, royalty and contractor profit etc. (SOR Sl. No. 109) |
| 174 | Supplying submersible pump sets conforming to IS 8034 and motor conforming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pumpshaftand polypropylene impeller. Motor suitable for working on 415V(+-)10% ,3PH, 50Hz, A.C supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust water proof winding shall be provided. (SOR Sl. No. 139) Submersible pump 100 mm dia 3.0 HP |
| 175 | 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable (3 core 1.5 sq mm) |
| 176 | DOL starter with SS Enclosure with 380/415 volt coil as per IS 3914 (5 HP) |
| 177 | 63 amps, TPN, switch disconnector fuse unit with ISI marked HRC fuses IS/IEC 60947-1&3 |
| 178 | ELECTRICALWORKSWiring for light point/ fan point/exhaust fan point / call bell point with 1.5 sq.mm FRPVC insulated copper conductor single corecable in surface/recessed PVC conduit, with modular switch ,modular plate, suitable GI box and earthing the point with 1.5sq mm FR PVC insulated copper conductor single core cable etc as required. Group A |
| 179 | Wiring for light/power plugwith 2x 4 sq.mm FR PVC insulated, copper conductor ,single core cable in and surface/recessed PVC conduitalong with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as requried . (1.5) |
| 180 | Wiring for circuit / sub main wiring alongwith earth wire with the following sizes ofPVC insulated, copper conductor , single core cable in surface/ recessed PVC coduit as required. (1.7)2X1.5 sq mm +1 x 1.5sq mm earth wire. |
| 181 | 2X2.5 sq mm +1 x 2.5sq mm earth wire. |
| 182 | 4X6 sqmm + 2X 6 sq mm earth wire. |
| 183 | Supplying and fixing of following waysingle pole & neutral, sheet steel , MCB distribution board415 volts, on surface /recess , complete with tinned copper bushbars ,neutral busbar, earth bar , din bar ,detachable gland plate , interconnections ,phosphatized and powder painted includingearthing etc. as requried. (but without MCB/RCCB/ISOLATOR)4 way (4+12) double door |
| 184 | Supplying and fixing 5 amps to 32 amps, rating, 240 volts, \"B\" series, maniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required . 6/32 amp Single pole |
| 185 | Supplying and fixing following rating four pole,415 volts, isolator in the existing MCBDB complete with connections, testing and commissioning etc. as required . (2.15) 63 amps(2.15.2) |
| 186 | Supplying and fixing suitable size GI box with moduler plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps moduler socket outlet and 5/6 amps moduler switch , connection painting etc.as reqd. (1.31) |
| 187 | Supplying and fixing 2 pin 5amp. Celling rose on the existing junction box/ wooden block including connection etc. as reqd. |
| 188 | Supplying and fixing brass battan/ angle holder including connection etc. as reqd. |
| 189 | Installation testing and commissioning of prewired, fluorescent fitting/compact fluorescent fitting of all type complete with all accessories and tubes etc. Directly on ceilinglwall. including ) connections with 1.5 sq mm FR PVC insulated, copper conductor, singlecore cable and earthing etc. as required . |
| 190 | ITC ceiling fan - Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq.mm. FR PVC insulated, copper conductor, single core cable etc. as required. |
| 191 | ITC exhaust fan upto 450 mm sweep- Installation, testing and commissioning of exhaust fan upto 450 mm sweep, including making the hole to suit the size of the above fan making good the damage,connection, testing, commissioning etc as required. |
| 192 | Earthing with copper earth plate 600mmx600mmx3mm thick including accessories and providing masonary inclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as reqd. |
| 193 | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth, including soldering etc. as required |
| 194 | S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required . (1.21)20mm PVC Conduit |
| 195 | Supplying and fixing following moduler type switch / socket on the existingswitch box / cover including connection etc. as reqd. (1.24) 5/6 amps switch |
| 196 | 5/6 amps 3 pin socket outlet |
| 197 | Supplying & fixing moduler type electranic fan regulator |
| 198 | Supplying & fixing moduler type blanking plate |
| 199 | Supplying and fixing following sizes/moduler GI box along with moduler base and cover plate for moduler switches in recess etc. 12 module (135mm x 205mm x 60mm) |
| 200 | Supplying & fixing moduler base and cover plate on existing moduler metal boxes etc. as req.1/2 module |
| 201 | Providing of 1200mm celling fan (C.G/eqv) |
| 202 | S/F/F 450mm dia exhaust fan |
| 203 | S/F/F 300mm dia exhaust fan |
| 204 | Providing and fixing of 1x12 W surface typebulkhead fitting with x20W CPL tube. CFL fitting with lamp. |
| 205 | GST @ 18% |
| 206 | Labour cess @ 1% |
