|
| 1 | Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority and Laying of Raw water Rising Main. |
| 2 | Providing and SupplyingISI markcentrifugally cast (spun)ductileiron pressure pipefor waterworks with socket and Spigot ends confirmingtoIS8329/2000 in standard lengthsofclassK-9 suitable forpush- on - joint (Rubber gasket Djointing) with cementmortarlining inside the pipes with outside zinc and bituminous coating includingtransportation,taxes & duties contractor profit insurancecarriagetowork site with loading Unloading etc stacking including inspection chargesand alltaxesall complete.(including cost of one no. gasket for each pipe) |
| 3 | 200 mm dia |
| 4 | 300 mm dia |
| 5 | 350 mm dia |
| 6 | EarthWorkinexcavation(As perI.S.3114/1965)for layingofDifferenttypesand sizeofpipessoastogiveone meter averagecoveroverthe socketofpipewithdisposal of excavated earth within initialleadandliftas per specification and direction of Engineer-in-charge |
| 7 | For classification of soil item -B |
| 8 | Earth work in excavation of foundation trenches as per design section in ordinary or soft rock (where blasting is not required and disposal of excavated materials so obtained (50 m away from the edge of the trenches ) with initial lead of 10 m and initial lift of 1.5 m as per specification amnd direction of E/I. |
| 9 | Earth work in backfilling the trenches after lying of different types and sizes of pipes with earth removed during excavated within initial lead and lifts as per specification and direction of Engineer in charge. |
| 10 | Supplyinglabours,tools,tackles,lubricantetcfor laying and jointing C.I.S/S Tyton pipes (class L A/DI) trenchessupplyingrubbergasket(Rubbergaskets confirmingtoI.S.S.-5382-1969)andmakinggasket jointsincludingprovidingnightguard,barrierand red light to safe guard against accident ,all complete ( Pipetobesupplieddepartmentallyfreeofcostand laying of pipes is to be done as per (I.S.S.3114-1985) as per design, specification and direction of E/I. |
| 11 | 200 mm dia |
| 12 | 300 mm dia |
| 13 | 350 mm dia |
| 14 | ProvidingandsupplyinglSIstandardD.I.specials& fittingwithsealingrubbergasketofS.B.R.complete withcastironfollowerglandandM.S.nut&bolts coated or otherwise protected from rusting and suitable for 0.1. pipes including cost of all labours and materials and transportation to stores 1 site, loading, unloading including all taxes,etc . complete as per I.S. 9523 Class K12 |
| 15 | 100-300 MM DIA |
| 16 | 350 MM DIA |
| 17 | Providing Double Flanged Sluice valve confirming to IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. (without by pass arrangement PN 1.6) |
| 18 | 200mm |
| 19 | 300mm |
| 20 | Providing double flange sluice valve confirming for IS - 2906/14846 including worn gear as per test pressure stainless steel spindle caps transportation etc all complete FOR Rate including all taxes. (Without byepass arrangement - PN-1.6) |
| 21 | 100mm |
| 22 | Supplyng labour and tools for fixing CI sluice valve in trenches with a pair of C.I Tail pieces incluidng making lead caulked joints and flenged joints as per I.S specification, including supplying all jointing materials (Pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S 6587-1972 and nuts and volts confirming to I.S.S 1364-1983) including drillig holes in flanges if required as per specification and direction of E/I. |
| 23 | 100 mm |
| 24 | 200 mm |
| 25 | 300 mm |
| 26 | Providing, supplying,single ball type Air valves as per MJPs standard specification combined with screw down isolating valve, small elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face drilled including al taxes, insurance, third party inspection charges, loading, unloading, transportation upto departmental stores/ site etc.Kinetic Air valve flanged type. PN-1.6 |
| 27 | 80mm |
| 28 | Supplying labour & tools for fixing C.I. double acting Air valve in trenches as per specification and direction of E/I. (C.I double acting Air valve to be supplied departmentally free of cost) . |
| 29 | 80 mm |
| 30 | Labour charge for one cutting of cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.B211 |
| 31 | 200 mm dia |
| 32 | 300 mm dia |
| 33 | 350 mm dia |
| 34 | Supplying labour tools and tackles for testing of laid CI pressure pipe up to 60 m meter head of water all complete as per specification and direction of engeneer- in- charge. Water to supplied free of cost departmentally. |
| 35 | 200 mm dia |
| 36 | 300 mm dia |
| 37 | 350 mm dia |
| 38 | Providing and constructing B.B. masonary valve chamber with 15 mm thick (1:3:6)proportion PCC bedding, excluding excavation, B.B masonery in CM 1:5 proportion precastRCCframe&cover,etc.completeasper directedbyEngineer-in-charge. |
| 39 | Construction of B.W. masonary valve chamber of size (1.20X0.90X1.50) m size |
| 40 | Supplyingtool cutting road as well restoring the same as per specification and direction of E/I |
| 41 | Pucca road- |
| 42 | Water Bound Macadam Road- |
| 43 | Dismantaling plain cement or lime concrete work including stacking servicable materials in countable stacks within 15 meter lead and sisposal of unservicable materials with all leads all complete as per direction of E/I. |
| 44 | Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stones chips 20 mm - 6mm size graded and clean coarse sand FM 2.5 to 3.0 including screening shuttering mixing cmenet concrete in mixer and placing in position vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I. |
| 45 | NH Crossing |
| 46 | Manufacturing providing and supplying spirally welded/ ERW/ SAW/ Fabricated M.S. Pipes (Commercial Quantity) including procurements of Plates. Gas cutting to required size rolling tack welding assembling in suitable lenghths to form pipes, welding on automaticweldingmachineandforming\"v\"edgeon bothendsofpipeincludingalltaxes(Centraland Local), railway freight, Insurance unloading form railway wagon,loadingintotrucktransporttostores/ site, unloading, stackingetc.complete as per IS-3589 andIS-5504asapplicableasperspecifications(No negative tolerance in thickness is permissible). |
| 47 | A) 600 mm dia , Thickness of pipe 10 mm |
| 48 | Installation of product pipe by Guided Auger Boring method including making of entry and exit pits, all related civil works like excavation , shoring / strutting, etc., shielded excavation through auger boring process, lowering of pipe segments in the jacking pit,laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instructions of the Engineer -in-charge all complete except the cost of the pipe . Average cover of 1.5M depth below G.L (upto 100 meter installation lenght ) In hard soil |
| 49 | b) 450 mm dia.to 600 mm dia M.S. pipe |
| 50 | Add GST 18% |
| 51 | Add Labour Cess 1% |
