}

Tender For Invitation Of Rates For Supply Of Materials And Piece Rated Works At Const. Of Meeting Hall (Finishing Work) At D.M. Camp Office Fatehgarh Distt. Farrukhabad, fatehgarh-Uttar Pradesh

Uttar Pradesh Jal Nigam has published Tender For Invitation Of Rates For Supply Of Materials And Piece Rated Works At Const. Of Meeting Hall (Finishing Work) At D.M. Camp Office Fatehgarh Distt. Farrukhabad. Submission Date for this Tender is 22-09-2023. Office Furniture Tenders in fatehgarh Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

39684174
Tender For Invitation Of Rates For Supply Of Materials And Piece Rated Works At Const. Of Meeting Hall (Finishing Work) At D.M. Camp Office Fatehgarh Distt. Farrukhabad
Open Tender
Indian
Uttar Pradesh
Fatehgarh
22-09-2023

Tender Details

Invitation Of Rates For Supply Of Materials And Piece Rated Works At Const. Of Meeting Hall ( Finishing Work ) At D.M. Camp Office Fatehgarh Distt. Farrukhabad As -1 Supply Of Director Desk 2 Supply Of High Back Chair ( Executive ) 3 Supply Of Visitor Chairs 4 Supply Of General Visitor Chairs 5 Supply & Fixing Of Tv Cabinate Modular 6 Supply Of Oled Android Tv 55 Inch 7 Installation Charges For Tv Etc 8 Supply & Installation Of Split Direct Expansion Air Conditioners Suitable For Operation On A / C Supply Single Phase 50 Hz 230V With Hermetically Sealed Compressor With Air Cooled Condenser With Dc Inverter Technology, Motor Capacitor And Start Run Capacitors, Elay And Over Load Protector Internal Unit, With One Indoor And One Outdoor Unit. The Condenser Unit Will Be Placed Outside The Room In The Terrace To Avoid Noise Including Standard Length Of Suitable Size Copper Tubing Covered With Insulation Tube, Suitable Capacity 3 Core Sheated / Pvc Copper Cable And A Battery Operated Wireless Remote Unit. 1.5 Tr Bee Star Rated : 4 Star Eer 3.2 9 Supply Of Stabilizer 4Kva For Ac 10 Pa System 10.1 Mike For Desk 10.2 Two Handheld Microphone With Receiver Unit 10.3 Central Mixer Amplifier 10.4 Wall Mounted Speakers 10.5 Installation Charges 11 Finishing Walls With Two Coat Of Exterior Emulsion Paint ( Apex ) Of Best Quality Including Supply Of All Materials, Labour And Tool Sand Plants Etc. Required For Proper Completion Of The Work. 12 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flangen Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C / C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With :

Key Value

Document Fees
INR 5900 /-
EMD
INR 100000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail