Military Engineer Services-MES has published Tender For Special Repairs To Industrial Canteen (P-30) At Nay, Nb(K). Submission Date for this Tender is 20-10-2023. Garden Tools Tenders in kochi Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Oct-2023 | Corrigendum1 | BOQ | 13-10-2023 |
| 2 | 13-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-10-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheetsany gauge thickness incl roof/Wallcovering complete all as specified and as directed |
| 2 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 3 | S&F Rolled sections as in main and cross beams, hip and jack rafter, purlins where connected to common rafter and running rails and guides for sliding doors fixed with angle cleat or other connecting plates of Fe 410W Grade E-250 Qality A complete all as specified and as directed |
| 4 | S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thickof any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screwscomplete all as specified and as directed |
| 5 | S&F prepainted galvalume zinccoatingGI based plain steel sheet 0.50 mm thickof any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed |
| 6 | M&L for prepration of new steel surface andpainting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed |
| 7 | M&L for prepration of old steel surface andpainting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with one coats of synthetic enamel paint complete all as specified and as directed |
| 8 | Dismantling celing boards of any description, any thickness including cover fillets complete all as specified and as directed. |
| 9 | S&F aluminium snap grid 605x605 mm false ceiling frame work of angle 25x25x2mm.Main TEE 38x25x1.5mm and cross TEE 25x25x1.4mm complete all as specified and as directed |
| 10 | S&F GI hangers 6mm dia (Upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.50mm dia ,40 mm longcomplete all as specified and as directed |
| 11 | M&L preparation new ceiling surfaces and applying two coats of oilbound distmper over one coat of alkalli resistance priming surface complete all as specified and as directed |
| 12 | S & F Perforated particle board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber M & L frameworkorwith staples on snap grid 12 mm thick on celing complete all as specified and as directed |
| 13 | Dismantling floor/hearth and wall tiling including cement mortar bedding (but not backing), removing servicable tiles and rubbish off the premises complete all as specified and as directed |
| 14 | M&L for non skidcoloured ceramic7-8 mm thick tiles (square/rectungular) polished area of each tiles exc 0.18 but notnot exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to matchand including 15mm tick screed bed with CM 1:6 |
| 15 | All as per item No: 14 abovebutskirting/dado over and including 10 mm thick rendering CM 1:4 complete all as specified and as directed |
| 16 | M & L for Non - skid Ceramiccoloured tiles tiles 7 to 8 mm thick area of each tileexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneatcement slurry and pointed incoloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed |
| 17 | M/L glazedcoloured ceramic tiles in vertical surfaces 300 x 450 x 7 mm thickin vertical surfaceset and joint in neat cement slurry and pointed in white cement or coloured cement to match the shadeover 10 mm thick rendering CM 1:4 complete all as specified and as directed. |
| 18 | Demolitionof concrete in ground floors and pavings n exc 15 cm thick (below of above ground level) complete all as specified and as directed |
| 19 | M & L Providing, cement concrete1:2:4 type B-1 with using 20 mm graded stone aggregatein roof kerbs or mud stops, rounded or chamfered on edges,beds etc complete all as specified and as directed |
| 20 | M&L for 75 mm thick cementconcrete 1:3:6 type C2 40mm gde agg as in sub base complete all as specified and as directed |
| 21 | M&L for 25 mm thick cement concrete1:2:4 type B1 20mm gde aggregate asfloor complete all as specified and as directed |
| 22 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed |
| 23 | M & L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified and as directed |
| 24 | M & L for cement plaster 10 mm thick in cement mortar 1:4 finished even and smooth w/o using extra cement complete all as specified and as directed |
| 25 | M&L for preparing new plastered wall surfaces and applying two coats of oilbound distmper over one coat ofalkali resistant priming surface complete all as specified and as directed |
| 26 | M&L for complete removal of existing treatment of plastered surfaces and applying two coats of oil bound distemper including with alkali resistant priming paint preparatory to distempering on surfaces of walls complete all as specified and as directed |
| 27 | M&L forcomplete removal of existing suracfe finishes of external wall ( with mechanical means like grinding and washing with water jet) preparation of surface and applyone coat of alkali resistant exterior primer @ 0.9litre/10 Sqmto anti fungal paint over 1.5mm thick exterior grade wall care putty and allowed to dry over night before applying first coat of weather proof (premium acrylic emulsion paint alkali & fungal resistance,dirt resistance exterior paint) ) complete all as specified and as directed.Note :- Before application of primer coat, the moisture of the wall surface shall be checked with amoisture meter . |
| 28 | M&L forpreparation new plastered external wall surfacesand applybase coat to antifungal paintand allowed to dry overnight before applying first coat of weather proof (anti fungal paint) complete all as specified and as directed.Note :- Before application of primer coat, the moisture of the wall surface shall be checked with amoisture meter . |
| 29 | M&L for application of first coat of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade ) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) on primed wall surfaceusing spray application or mechanical means, to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterioremulsion paint completeall as specified and as directed. |
| 30 | M&L for application of second coat of weather proofpaint(premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade ) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) over first coat on wall surface using spray application or mechanical means, to get a smooth and tint free surfacecompleteall as specified and as directed. Note for item No. 27 to 30: (i) The old surface shall prepared using mechanical ways I.e., jet-spray, grinding etc.,in such a manner that there should not be any impression of dent, all cracks to be filled with crack filler, water proofing primer in shaft/dampness areas and it should be made even all as per manufacturers instruction before application of putty base primer/base coat and emulsion paint. (ii). The work shall be got executed through authorised applicator of approved manufacturer. Authorisation letter ofapplicator shall be produced by the contractor before starting the work (iii) The contractor shall submit performance Guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completion of entire work. (iv) After preparation of surface exterior putty to be applied to make surface even to receive base coat and two coat of emulsion paint, the same shall be got approved by GE before each stage. |
| 31 | M&L for 1.5mm thick wall care putty on internalwalls all as specified and directed . |
| 32 | Demolition of brick work built in cement mortar, including all quine, arches, pillar etc all as specified and directed . |
| 33 | Material and labour for Brick work as in half brick thick walls with sub class ‘B’ bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar1:4 complete all as specified & directed. |
| 34 | Taking down door/windows with chowkats with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each including cutting holes complete all as specified and as directed . |
| 35 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed |
| 36 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 37 | M & L 150 mm long aluminium handle cast type anodized complete all as specified and directed. |
| 38 | M & L 100 mm size, mild steelbutt hinges medium weight cold rolled complete all as specified and as directed |
| 39 | M & L 200mm long aluminium anodized barrel tower bolt of extruded sectioncomplete all as specified and as directed |
| 40 | S&F Aluminium alloy anodised sliding door bolt 150mm long with hasp, staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified and as directed |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed |
| 42 | Taking down door/windows with chowkats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n exc 4 sqm each including cutting holes complete all as specified and as directed |
| 43 | S &Frepairspoweder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each or, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed |
| 44 | S&F repairs poweder coatedAnodised aluminium frame for doors, windows, ventilators, partitions, cubicles etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 45 | M&L 5.5 mm thick selected glass type ordinary quality and glazing with aluminium beeding exc 0.5 sqm etc complete all as specified and directed |
| 46 | M&L repairspoweder coated Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessaryjoining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws handles etc.complete all as specified and as directed |
| 47 | M & L Granite (of any type) tiles 15 to 18mm thick machine cut,flooring bedded andpointed with grey cement slurry and pointed with white cement with admixture of pigment to match theshade of granite stone including grinding and polishing complete incl15 mm thick screed bed or bedding layer of mortar in cementmortar 1:4 complete all as specified and as directed |
| 48 | M & L Granite (of any type) tiles 12 to 15mm thick machine cut,in skirting/dado laid over cement screed and jointed with grey cement slurry, a and pointed with white cement with admixture of pigment to match thehade of granite stone including grinding and polishing complete incl over 15 mm thick screed bed with CM 1:4 complete all as specified and as directed |
| 49 | S&Fpoweder coatedaluminium ventilators with fixed type with out sash bars aluminun section not less than 0.55 kg/ rm including necessary joining cleats, glazing clips, rubber packing snap beading screws etc complete all as specified and as directed |
| 50 | M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed . |
| 51 | M&L for 2nd class hard wood Plain, framed,panelled shutters 35mm Thickness of shutter (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial faceveneers: supplied and fitted to chowkats complete all as specified and as directed |
| 52 | S&F 35mm thick glazed and 2nd class hard woodskelton shutters, open rebated and prepared to receive glass gauge etc., divided into squares, with plain, chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Pt-I, Sec 8, clause 8.20 (a) complete all as specified and as directed |
| 53 | S&Fanodised aluminium alloy 25 mm dia curtain railscomplete all as specified and as directed |
| 54 | S& F end designed knob for curtain rod aluminium powder coatedsuitable for 25mm dia curtain rod and bracket of stainless steel suitable for 25mm dia curtain rod complete all as specified and as directed. |
| 55 | M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 56 | S&F Mortice lock vertical type size 100 mm, 4 levers of brass complete all as specified and as directed |
| 57 | S&F floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor overall length of cover plate 150 mm complete all as specified and as directed |
| 58 | S&F anodised aluminiumdecorative grills powder coated window grills not less than 2.07Kg /sqm conforming to IS 1868 minimum anodic coating of grade AC15of approved design/pattern with approved standard section and fixed to the existing window frame with cp, brass/ stainless screws @200 mm c/c including cutting the grill proper opening size for fixing and operation of handels and fixing complete all as specified and as directed |
| 59 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width ofaparture1.40mm and fixed with aluminium wire staples complete all as specified and as directed |
| 60 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any any type Weight per sq m N exc 4 kg complete all as specified and as directed |
| 61 | Supply and fixing of Bib tap CP, Quarter turn with flange and areator, fancy type Long body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipeof size 15mm , complete all as specified and as directed . |
| 62 | S&Fin repair 15mm dia fancy type chromium platedStop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed |
| 63 | S&F15 mm Concussive pushbutton taps of castcopper alloy, screwed for iron pipe and fixed complete all as specified and as directed |
| 64 | S&F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifiedIn cluding taking down of existing pipe complete all as specified and as directed |
| 65 | All as per item No: 64but 20 mm bore complete all as specified and directed. |
| 66 | S&F on wall/concealed on wall high pressure CPVC pipes SDR 13.5 & plain CPVC SDR 11 fittings including all necessary fittings,solvents of size 40mm complete all as specified and as directed. |
| 67 | Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubberhose pipe ,all as per specified and directed (Make : Model No: F8030102of Cera orequivalent make mentioned in list of manufactures). |
| 68 | S&F brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (40 mm bore) complete all as specified and directed. |
| 69 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 70 | S & Fbevelled edge mirror size 1.2mx 0.6m of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 71 | S& F for fixed in repairvitreous China urinals, bowl typesize of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and as directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe. |
| 72 | S&F Vitreous China wash basin, counter type oval shape, white, flat back, size 630x450mm including 15 mm bore CP Pillar cock with capstan head screwed high pressure with or W/O lettered hot or cold with long screwed shank and fly nuts and PVC connections 15mm size with PTMT nuts of length 600 mm, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed |
| 73 | S&F viterous China wash down water closet pan(pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 74 | S&F PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and as directed |
| 75 | S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings complete all as specified and as directed. |
| 76 | S&F PVC (SWR) bends 75 mm dia single socketed in any length , with rubber rings complete all as specified and as directed. |
| 77 | S&F PVC (SWR)110 mm dia vent cowl complete all as specified and as directed |
| 78 | S&F PVC (SWR) pipe 110 mm dia single socketed in any length complete all as specified and as directed |
| 79 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed |
| 80 | S&F Aluminium anodised chromium plated towel rail 20mm dia D type, 60cm long between flangescomplete all as specified and as directed |
| 81 | S&F in repaires soap dish Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed |
| 82 | S&F in repaires Chinaware partition for urinal of size 310x700mm complete all as specified and as directed |
| 83 | M &L providing selicon sealant for roof side glass of all side after cleaning surface etc complete all as specified and as directed |
| 84 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings complete all as specified and as directed |
| 85 | S&F PVC rain water pipes 110mm dia including bend, elbow, iron brackets for fixing etc complete all as specified and as directed |
| 86 | M&L for preparation of old wooden surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 87 | Supply and fix on wall/concealed on wallhigh pressure CPVC pipes SDR-11& plain CPVC SDR 11 fittings includingall necessay fittings, solvents of size 25 mm diacomplete all as specified and directed. |
| 88 | S/F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittingscomplete all specified and directed. |
| 89 | S/F CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittingscomplete all specified and directed. |
| 90 | S/F CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. |
| 91 | Supply and fixing 15mm angle valve,quater turn with flange, with flange type chromium plated for fixing with CPVC pipecomplete specified and as directed by the Engineer-in-charge.(Make : Model No: F2004201 of Cera orequivalent make mentioned in list of maufactures) |
| 92 | Supply and fixing in pillar taps,with areator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe,complete all as specified and directed .(Make : Model No:F2004101 of Cera orequivalent make mentioned in list of manufactures). |
| 93 | Supply and fixing two way angle cock with flange 15 mm,cast copper alloychromium plated for fixing with CPVC pipecomplete specified and as directed .(Make : Model No: F2004211 of Cera or equivalent make mentioned in list of manufactures) |
| 94 | Supply and fixing CP angle cock, self closers/ pressmatic with wall flange for urinal pots to fixed in 20/15mm pipe, complete all as specified and directed by the Engineer -in-charge (Model No F9020203 of CERA or equivalent make mentioned in list of manufactures) |
| 95 | Supply and fixing PVC connection pipe 16mm dia450mm long cold water complete with brass union on both sides to suit 15mmpipecomplete all as specified and directed . |
| 96 | Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 2000 liters including inlet, outlet, over flow wash out and Air pipe conncetions. |
| 97 | S/F float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed. |
| 98 | S&F sink cock wall mounted with 6 inch long swivel spout and wall flange complete all as specified and as directed. Model No. F2004301 of Cera or equivalent make mentioned in list of manufactures. |
| 99 | Taking down old GI/ CPVC pipe of size 20 mmcomplete all as specified and as directed. |
| 100 | Taking down old GI/ CPVC pipe of size 25 mmcomplete all as specified and as directed. |
| 101 | Taking down old GI/ CPVC pipe of size 40 mmcomplete all as specified and as directed. |
| 102 | Taking down old CPVC ball valve of size 20 mm /25 mm/40mmcomplete all as specified and directed. |
| 103 | Taking down old bib tap, pillar tap,angle valve, health faucet, angle cock, sink cock complete all as specified and as directed. |
| 104 | Taking down old rotational moulded polythene water storage tanks of capacity 2000 ltrs/ 1000 litres complete all as specified and as directed. |
| 105 | Taking down old float valve of 25 mm dia complete all as specified and as directed. |
| 106 | Taking down old PVC connection complete all as specified and as directed. |
| 107 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sheet metal encl. with plug & socket, light fittings of any type and make etc.Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 108 | M&L , point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CML No. single core multistranded cable in and including medium grade concealed wiring usingPVC conduitnot less than 20mm dia and accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and with modular switch boxes and PVC modular cover plate of suitable size for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multistranded cable as earth continuity wire all as specified and as directed for One light point controlled by one switch |
| 109 | All as per item No.108 above but forOne fan point / exhaust fan point controlled by one switch & regulator complete all as specified and as directed. |
| 110 | All as per item No.108 above but forOne 5 pin 5 Amps Socket point controlled by one switch on same board complete all as specified and as directed. |
| 111 | All as per item No.108 above but for One 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and as directed. |
| 112 | All as per item No 108 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified and as directed. |
| 113 | All as per item No 108 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure for AC point complete all as specified and as directed. |
| 114 | S&F modular switch 1 way 6 Amps,1module complete all as specified and as directed. |
| 115 | S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed. |
| 116 | S & Fsocket modular 6 Amps and 2/3 pin combined 2 module complete all as specified and as directed. |
| 117 | S & F Modular socket6 A/16 A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 118 | S&F switch 15 A One way SP modualr type complete all as specified and as directed. |
| 119 | S&F Sheet metal enclosures with socket plug top and MCB" single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified and as directed. |
| 120 | Refixing of 2x2 LED down lighter 40 Watt at any location obtained as per Ser Item no. 107 above all as specified and directed. |
| 121 | Supply & fix Regal Batten for LED tube lights, both side connection type and with ISI marked, medium grade LED tube rod 1 x 20 Watt, both side connection all as specified and as directed. Make of batten : Havells Cat Part No. Regal batten 8UPT001X22WSSBSWH / Crompton Cat Part No. IGP131LT8-16 / Philips Cat Part No. TMC501P1XTLED22WP3241 or equivalent make mentioned in list of manufactures Make of tube rod : Havells Cat Part No. Crystal 1213T8DSTL20W LED 865 GLASS / Crompton Cat Part No. LG-T8-20-865-2 / Philips Cat Part No. Essential LED tube 1200mm 20W865T865T81ND-1 or equivalent make mentioned in list of manufactures |
| 122 | Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 2 x 20 Watt, both side connection with arrangementofHanging on stainless steel hanging wire all as specified and as directed.Make of batten : Havells Cat Part No. REGALBATTENT8UPTO2 X22WDSBSWH and Crystal 1213T8DSTL20WLED865SGLASS / Crompton Cat Part No. IGP131LT8-16 / Philips Cat Part No. TMC501P1XTLED22WP3241 or equivalent make mentioned in list of manufactures |
| 123 | Refixing only LED tube rods both side connection type obtained as per item No. 107 above on new fittings at any location all as specifeid and directed. |
| 124 | S&F tube rods 1x20 Watt both side connection complete all as specified and as directed. Make : Havells Cat Part No. Crystal 1213T8DSTL20W LED 865 GLASS / Crompton Cat Part No. LG-T8-20-865-2 / Philips Cat Part No. Essential LED tube 1200mm 20W865T865T81ND-1 or equivalent make mentioned in list of manufactures |
| 125 | Supply & fix LED down lighter 2"x2" , 36/40 W 240 voltall as per specified and directed. Make Havells Cat Part No. ENDURASLIMPROPLUS 2x2 PLR36WLED 840MOD and driver LEDDRIVER36V36WS or Crompton Cat Part No. LCTLRN-36-FO-CDL/ Philips Cat Part No. RC380BLED36S-6500G4L60PSUOD. |
| 126 | Supply & fix LED down lighter, round or square, 12 W,240 voltall as per specified and directed. Make Polycab Cat Part No. LDO0120004I orCrompton Cat Part No. LSDEP-12-CDL / Philips Cat Part No. 94051090or equivalent make mentioned in list of manufactures |
| 127 | S & F forLED Mirror light fitting 8 watt with connected accessories complete all as specified & directed. Make :Polycab Cat Part No.LDO0103040 orCrompton Cat No. LDL-10-WW, Luker Cat Part No. LTSM10 or equivalent make mentioned in list of manufactures |
| 128 | S&F fan regulator electronic step type, modular type, 120 W, 2 module, 5 steps complete all as specified and as directed. |
| 129 | Taking down ceiling fan/Exhaust fan, Painting of celing fans/Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and hanging in original position and connecting up including provision of cable from ceiling rose or connector to fan. |
| 130 | Taking down existing wall mounting fans of any make and size including servicing, cleaning, oiling (painting if required) all as per site requirement and refixing the same on existing/proposed location complete all as specified and directed. |
| 131 | Taking down existing wall mounting fans of any make and size including servicing, cleaning, oiling (painting if required), winding with super enamelled copper wire of exisitng size and gauge including heating, baking and re-assembling all as per site site requirement and refixing the same on existing/proposed location complete all as specified and directed. |
| 132 | Taking down existing ceiling fans of 1200 mm sweep complete and removing to workshop for following repairs & re-fixing at any location all as directed. (a) Strip opening/ cutting of the ceiling fan and rewinding with super enamelled copper winding wire of same capacity, heating, baking, sleeves, varnish etc. (b) Replacement of ball bearings of suitable size. (c) Replacement of fan capacitor 2.5 m.f.d (d) Re-assembling and painting to the fans by spray painting with super finish including blades and re-fixing at directed location. |
| 133 | All as per item No.131 above but for exhaust fans of 300/380/450 mm sweep including necessary welding to the brackets, frame etc as per site requirement all as directed. |
| 134 | S&F energy efficient ceiling fan of 1200mm sweep (3 star rated) 230 Volt 50 Hz including all electrical connection all as specified and as directed. Make :- Havells Cat Part No. ES-40 (3 star rated) or Crompton/Usha Cat Part No. Maximus or equivalent make mentioned in list of manufactures . |
| 135 | S&F 300 mm sweep, metal body exhaust fan heavy duty, single phase 230 Volts, all as specified & directed. Make: Havells Cat Part No. Ventil Air-DX white or Crompton Cat Part No. EXHD300-4-1 / Bajaj or equivalent make mentioned in list of manufactures. |
| 136 | Taking down existing MCB DB SPN with MCBs of any type and size and removing to contractor store yard for taking the credit. |
| 137 | Taking down existing MCB DB TPN with MCBs of any type and size and removing to contractor store yard for taking the credit. |
| 138 | S&F Sheet metal enclosureVertical TPN for DB"s when MCCB"s to be used 8 way with 250 amps bus bar double door IP 43 metal door complete all as specified and as directed.Make L&T cat No DBVTL008DD / Legrand / ABB or equivalent make mentioned in list of manufactures |
| 139 | S&F Sheet metal enclosureVertical TPN for DB"s when MCCB"s to be used 6 way with 250 amps bus bar double door IP 43 metal door complete all as specified and as directed.Make L&T cat No DBVTL006DD / Legrand / ABB or equivalent make mentioned in list of manufactures |
| 140 | S&F Sheet metal enclosures with socket plug top and MCB" triple pole and neutral enclosure with a three pin and earth plug and socket complete with one triple pole 32 A MCB including taking down old one complete all as specified and as directed. |
| 141 | S&F SPN sheet metal enclosure for DB 12 ways Double doorcomplete all as specified and as directed. |
| 142 | S&F SPN sheet metal enclosure for DB 8 ways Double door complete all as specified and as directed. |
| 143 | S&F SPN sheet metal enclosure for DB 4 ways Double door complete all as specified and as directed. |
| 144 | S&F MCCB 3 pole, 415 Volt fixed type 63 Amps with breaking capacity 16 KA complete all as specified and directed Make L&T Cat Part No. CM90517OOJOor Legrand Cat Part No. 0270 39/ Schneider Cat Part No. A9NIP63B or equivalent make mentioned in list of manufactures |
| 145 | S&F MCCB 3 pole, 415 Volt fixed type 100 Amps with breaking capacity 16 KA complete all as specified and directed. |
| 146 | S&F MCB "B" Curve 63 Amp Threepole, 415 Volts,all as specified and directed. Make L&T Cat Part No. BB30630B or Legrand Cat Part No. 4086 20 / Schneider Cat Part No. A9NIP63B or equivalent make mentioned in list of manufactures |
| 147 | S&F MCB "B" Curve 32 Amp Threepole, 415 Volts,all as specified and directed. Make L&T Cat Part No.BB30320B or Legrand Cat Part No. 4065 09 / Schneider Cat Part No. A9N3P32B or equivalent make mentioned in list of manufactures |
| 148 | S&F MCB "B" Curve 40 Amp SPN ,240 Volts all as specified and directed. Make L&T Cat Part No. BB20400Bor Schneider Cat Part No. A9N2P40B / Legrand Cat Part No. 4065 01or equivalent make mentioned in list of manufactures |
| 149 | S&F MCB "B" Curve 32 Amp SPN ,240 Volts all as specified and directed. Make L&T Cat Part No. BB20032B or Schneider Cat Part No. A9N2P32B / Legrand Cat Part No. 4065 00 or equivalent make mentioned in list of manufactures |
| 150 | S&F MCB "B" Curve SP 6 To 32 Amp , 240 Volts, all as specified and directed. Make : L&T Cat Part No. BB10060B to BB10320B / Legrand Cat Part No. 408587-408596 or equivalent make mentioned in list of manufactures |
| 151 | Taking down old sub main wiring of any type andsize and removing to contractor store yard for taking the credit, making good disturbed wall surfaces matching with existing surfaces all as specified and directed. |
| 152 | M/L submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connceting with suitable size thimble complete allas specified and as directed. Note: two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length |
| 153 | All as per item No 152 but 2 single core 6 Sqmm with 6 Sqmmearth wire complete allas specified and as directed. Note: two run of 6 sqmm size PVC cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length |
| 154 | All as per item No 152 above4 runs of 6 Sqmm PVC copper conductor including 2 runs of 6 Sqmm copper conductor as earth wirecomplete all as specified and as directed. Note: 4 run of 6 sqmm size PVC cable , two run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length |
| 155 | All as per item No 152 above but with 4 single core 10 Sqmm PVC insulated copper conductor with 2 run 10 Sqmm copper conductor as earth wire complete all as specified and as directed. Note: 4 run of 10 sqmm size PVC cable , two run of 10 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length |
| 156 | Taking down of existing unserviceable earthing of any type with strips, junction boxes, earth plates complete all as specified and directed. |
| 157 | M&L for earthing complete with galvanised steel earth plate elctrode 60 x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm as earthing lead by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.point 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 158 | Taking down existing Building Security Lights of any type or make or at any height for accounting in credit. |
| 159 | Supply and fixing building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 45 Wattincluding suitable GI bracket of 25 mm dia and fixing arrangement on walls all as specified and directed. Make: Crompton Cat Part No.Cat Part No. LSTS-45-CDL-M Philips HSN code 94054090/ Jaguar Cat Part No. LPCRSRT30WXW or equivalent make mentioned in list of makes. |
| 160 | Taking down existing LT cable of any type and size for reuse or taking credit all as specified and directed. |
| 161 | M&L for refixing of cables of any type and size for building security lights obtained as per item No. 160 above on walls with clamps, screws etc all as specified and directed. |
| 162 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) onwalls with clamps, saddles, screws etc for building security light of 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and as directed. |
| 163 | All as per item No. 162 above but for 16 sq mm 2 core complete all as specified and as directed. |
| 164 | Supply and fixing street light control panel, single phase 6 KW load with 24 hour Digital timer, Contactor rating 32 Amps TP, MCB rating 40 AmpsSPNincluding taking down old one of any type/size.Make : Havells Cat Part No. IHXSS01060 /L&T/Legrand or euivalent make mentioned in list of manufactures |
| 165 | S & F On load change over switch as open execution 100 A,415V,AC 23 A,4P & Type CO1-100 Cat Ref No CO11000OOOO of M/s L & T or equivalent in M/s Havells/ M/s Schneider or euivalent make mentioned in list of manufacturesas in replacement/ repairs complete all as specified and directed |
| 166 | M&L for dismantling of existing panel including disconnecting cables, etc. and supply, installation, testing and commissioning of factory made LT cubical panel, INDOOR TYPE Suitable to accommodate the following accessories made out of CRCA sheet 2 MM thick dulypowder coated with Seimens grey shade RAL 7032,totally enclosed, dust and vermin proof with working voltage of 415V, 50 Hz, 3 phase 4 wire, fully compact metalized for each control gear having back side of panel openable (keeping in mind the space constraints at site) and should be provided with suitable louvers for ventilation including suitable sizeof MS medium channel of size 100mm above 1 mtr on ground floor level and necessary foundation work providing PCC 1:2:4 B1 with 20 mm graded aggregate. Bus bars provided shall be adequately supported on insulators to withstand dynamic stresses due to short circuit current and shall be suitably colour coded with heat shrinkable sleeve for phase indication. The standard phase arrangement when facing the switchgear shall be R-Y-B from left to right. The bus bar connections and their insulated supports shall be mechanically strong, and shall withstand all the stresses which shall be imposed upon them in ordinary working due to fixing, vibration, fluctuation in temp., shot-circuit or other causes. The bus bar will be supported on DMC. Provision shall be made for expansion and contraction of the bus bars and connections with variation of temp. Internal wiring should be done with 2.5 sqmm multi-stranded copper conductors and shall be properly bunched, tied, ferruled for proper identification, crimped and shall be connected with suitable lugs and PVC sleeves, etc. The bottom of the panel should contain detachable plate having provision for entry of armored cable of adequate size with glands. Threaded earthing studs - 02 Nos shall be provided at the bottom and lifting lugs of suitable size at top to lift the panel safely shall be made. The cubicle incomer MCCB as well as outgoings shall have copper 4 pole/TP extension links of current rating not less than 1.5 times the rated capacity of individual feeders. Location -Industrial canteen back side. |
| 167 | The cubicle should be inclusive of following : INCOMING - (a)MCCB -DPX3 250 thermal & magnetic type 4 pole 415 volt 25 kA breaking cap. adjustable thermal release range 250 Amps Cat ref no. 4202 19 of make Legrand or equivalent in M/s Schenider/M/s Siemens/ M/s ABB – 01 No. OUTGOING (a)MCCB -DPX3 160 thermal & magnetic type 4 pole 415 volt 25 kA breaking cap. adjustable thermal release range 100 Amps Cat ref no. 4200 55 of make Legrand or equivalent inM/s Schenider/M/s Siemens/ M/s ABB – 02 No. (b)MCCB -DPX3 160 thermal & magnetic type 4 pole 415 volt 25 kA breaking cap. adjustable thermal release range 63 Amps Cat ref no. 4200 53 of make Legrand or equivalent inM/s Schenider/M/s Siemens/ M/s ABB – 04 No. (c) Ampere Meter 0-200 Amps and volt meter 0-500 Volts with suitable ratio CT - 01 Each (d) Selector switches for Ampere Meter and Volt Meter - 02 (e) LED Iindictors ribbed lens with trimmed collar- Red, Yellow and Blue - 1 Each, Make TEKNIK/SELECT/L&T (f) Aluminum busbar of capacity 400 amps for three phases and half of size for neutral |
| 168 | Supply and Fixing PVC Junction box, with 2 x Aluminium busbar and one MCB SP 6 Amps for controlling street/ security lights water tight includign taking down old one all as specified and directed. |
| 169 | S&F air termination single pointed aluminium rod 12 mm dia and 300 mm longcomplete all as specified and as directed. |
| 170 | S&F test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm, and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw including PVC junction boxcomplete all as specified and as directed. |
| 171 | S&F aluminium strip 25 x 3 mm with saddles, insulators and fixing screws etc for roof conductors and down conductors on walls/above ground complete all as specified and as directed. |
| 172 | M&Learthing complete with galvanised steel earth plate electrode60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth strip 32x6 mm as earth lead7.5 mtrs by means of bolts, nuts and washers of galvanised steelall as shown in electrical plate No. 3 connected to earthing test point completeall as specified andindicated including testing on completion complete. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 typeC-1 for chamber,RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade forwatering and 40mm dia GI med grade earth lead protection pipes with funnel and wire mesh including taking down old one complete all as specified and as directed. |
| 173 | Takinjg down old air termination complete all as specified and as directed. |
| 174 | Taking down old test point complete all as specified and as directed. |
| 175 | Taking down old aluminium strip complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
