Hydro Electirc Project -HEP has published Tender For Electrical Components For Rehabilitation Of Jayakawadi Dam, Paithan Dist. Aurangabad. Submission Date for this Tender is 03-10-2023. Electrification Work Tenders in paithan Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Sep-2023 | Corrigendum No.1 | Date | 03-10-2023 |
| Sl. No. | Item Description |
| 1 | PART A |
| 2 | Sub Estimate A : Supply, erection, testing & commissioning of Transformer & Panel at Jayakwadi Dam |
| 3 | Item No 1 :Supplying, installing, testing & commissioning of 3 phase, 11/0.433 kV, 50 Hz., 100 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 475 Watts at 50% load, 1650Watts at 100% load as per IS:1180 - 2014 energy efficiency level II, with necessary permissions of Electrical Inspector, as per specification no SS- TR. |
| 4 | Item No 2 :Supplying & erecting end pole D. P. Structure for 11/0.415 kV, 100 kVA Transformer with R.S.J. Pole 2 Nos. of size 100 x 116 mm x 11 Mtr. Long with suitable Distribution Box of C.R.C.A. Sheet 16 SWG with 4 Pole MCCB 200 Amps as incomer & 6 Nos.100 Amps Kitkat/MCCB for outgoingcircuits. Transformer D.P. Structure includes the A. B. Switch 200 Amps, D.O. fuse Set & L.A. Set. 2 Nos. Top channel of size 100 mm x 50 mm for erection of A.B. Switch & 2 Nos. Base channel of size 100 mm x 50 x mm for erecting Transformer. Channel of size 75 x40 mm for erecting D.O. Fuse Set, L.A., A.B. Switch handle etc. Angle of size 50 x 50 x6 mm for erecting distribution Box , Transformer Belt etc.as per drawing (min. 124 Kg. iron work ) with necessary clamps, Nut-bolts. vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. Structure shall be erected inc.c. foundation complete. |
| 5 | Item No3 :Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP |
| 6 | Item No 4: Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq.mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 7 | Item No 5: Supplying and erecting four pole metal clad ON LOAD change over switch 415 V, 400A erected on angle iron / GI frame complete. |
| 8 | Item No 6:Providing & erecting 3 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB |
| 9 | Item No 7:Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measures & displays trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs |
| 10 | Item No 8:Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materialsconnected to the meter with test certificates. |
| 11 | Item No 9: Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/ALL |
| 12 | Item No 10 :Providing & erecting 3 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads,provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosureon iron /GI frame as per specification no. SW-WR/MCCB |
| 13 | Item No 11 :Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosureon iron /GI frame as per specification no. SW-WR/MCCB |
| 14 | Item No 12 :Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 400A complete as per specification no.CP-BB |
| 15 | Item No 13 :Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. |
| 16 | Item No 14 :Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. |
| 17 | Item No 15 :Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXNCTR |
| 18 | Item No 16 :Supplying & erecting mains with 4x25 sq.mm F.R copper PCC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 19 | Item No 17 :Supplying & erecting mains with 4x50 sq.mm FR copper PCC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 20 | Item No 18: Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole upto 100A MCCB complete. (set of 6). |
| 21 | Item No 19: Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole upto 250A MCCB complete. (set of 6) |
| 22 | Item No 20:Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole 300A- 400AMCCB complete. (set of 6) |
| 23 | Item No 21:Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete. |
| 24 | Item No 22 :Supplying and erecting G.I. stay set for poles, includingloop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/10 SWG, G.l. stay rod 20 mm x 1.8 m length andpole clamps duly erected in provided cement concrete foundation. |
| 25 | Item No 23: Dismantling existing pole mounted distribution transformer safely without any damages. |
| 26 | Item No 24: Dismantling existing DO / AB switch set complete from D.P. structure in an approved manner. |
| 27 | Item No 25: Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. |
| 28 | Item No 26: Dismantling existing lightning arrestor set, insulator complete from DP structure in an approved manner. |
| 29 | Item No 27: Dismantling the existing cables of all types & size above 50 sq. mm. |
| 30 | Item No 28:Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame complete. |
| 31 | Supply, erection , testing & comissioning of cables &control panel at inspection gallary at Jayakwadi Dam |
| 32 | Item No 29:Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXNCTR |
| 33 | Item No 30: Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as perspecification no. CB-LT/AL |
| 34 | Item No 31:Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 200A erected on angle iron /GI frame approved make complete. |
| 35 | Item No 32 : Providing & erecting 3 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB |
| 36 | Item No 33: Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-WR/MCCB |
| 37 | Item No 34:Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB |
| 38 | Item No 35:Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat ofred lead paint and 2 coats of enamel paint complete. |
| 39 | Item No 36: Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no. CB-LT/AL |
| 40 | Item No 37 : Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 41 | Item No 38 : Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A, 3 pin plug & earth socket and 30 A 3 pin plug top with 30A triple pole MCB complete erected on angle iron/ GI frame |
| 42 | Item No 39 :Supplying and erecting LED street light fitting suitable above 26W to 36W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FGODF/FLS2. |
| 43 | Item No 40 : Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB |
| 44 | Item No 41 :Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB |
| 45 | Item No 42: Supplying & erecting mains with 2x1.5 sq.mm F.R copper PCC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per |
| 46 | Item No 43:Dismantling the existing cables of all types & size above 50 sq. mm. |
| 47 | Item No 44: Dismantling the existing cables of all types & size up to 10 sq. mm. |
| 48 | Item No 45: Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame complete. |
| 49 | Item No 46: Dismantling the existing underground cable without damaging it with glands, cable end box including refilling the trench up to ground level and making coils complete. |
| 50 | Supply, erection, testing & commissioningof making electrical supply arrangement for the gate operationat Jayakwadi Dam |
| 51 | Item No 47: Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no. CB-LT/AL |
| 52 | Item No 48: Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no. CB-LT/AL |
| 53 | Item No 49:Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 54 | Item No 50:Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-WR/MCCB |
| 55 | Item No 51:Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. |
| 56 | Item No 52: Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% aluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as perspecification no. BCP-BB |
| 57 | Item No 53: Supplying and erecting LED flood light fitting of 90-100W, including lamp, with PF > 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-DF/FLS-2 |
| 58 | Item No 54 :Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No . FG-ODF/FLS2 |
| 59 | Item No 55 : Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB |
| 60 | Item No 56 : Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB |
| 61 | Item No 57 :Supplying & erecting mains with 2x1.5 sq.mm F.R copper PCC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 62 | Item No 58 :Supplying & erecting mains with 2x2.5 sq.mm F.R copper PCC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 63 | Item No 59 :Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/ pipe as per specification no. CB-LT/AL |
| 64 | Item No 60 :Supplying, installing, testing and commissioning Solar street light pole comprising of 12W LED luminaire, 12.8V- 30Ah Li battery, with 75Wp Solar panel, MS Powder Coated Battery Box weatherproof, mounted on 75/80 mm dia. BGrade GI Pole of 6 Mtr. height (5m above ground & 1m below ground), 12W LED Chip of luminaire should be in compliance to IES: LM-80 & Performance parameters of luminaire shall be as per IES LM-79:2008 Or IS 16106 : 2012); along with brackets, foundation, earthing and necessaryaccessories complete as per MNRE specification (With 5 Years warrantee) |
| 65 | Item No 61 :Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 66 | Item No 62 : Supplying, erecting and marking enclosure single pole and neutral distribution board (SPNDB) one pole for SPMCB 1 no on iron/ GI frame as per specification no. SWSWR/MCBDB |
| 67 | Item No 63: Point wiring in PCC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WGPW/ SW |
| 68 | Item No 64: Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW |
| 69 | Item No 65: Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PCC copper wire in HMS PCC conduitmin. 20mm dia. as per specification No: WG-MA/PC. |
| 70 | Item No 66: Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq.mm. (12 SWG) G.I. earth wire complete erected with glands& lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 71 | Item No 67 : Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF |
| 72 | Item No 68 : Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 250 mm. /300 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc. |
| 73 | Item No 69 :Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and =E‘ class insulation. |
| 74 | Item No 70 :Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete. |
| 75 | Item No 71:Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 76 | Item No 72 :Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 500 mm width & 20 mm height complete with necessary hardware in approved manner. |
| 77 | Item No73 :Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. |
| 78 | Item No74 : Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete. |
| 79 | Item No75 : Providing Round bottom fire bucket of 9 Litres capacity as per IS :2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook Complete. |
| 80 | Item No76 : Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working upto 22 kV supply complete. |
| 81 | Item No77:Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes) |
| 82 | Item No78 :Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer. |
| 83 | Item No79 :Supplying and erecting D.C.P. type fire extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete. |
| 84 | Item No 80: Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall. |
| 85 | Item No 81: Supplying and fixing PCC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 Kv |
| 86 | Item No 82: Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 87 | Item No 83: SITC of 415 Volts, 3 phase, 50 Hz Siren of 8 km range, horizontal double mounting type of 5 H.P. 2800 RPM on C.C. foundation complete as per specification no. SRN-AS/SM |
| 88 | Item No 84: Supplying and erecting flat flexible 3 core 4 sq mm PCC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 89 | Item No 85:Early streamer lightening arrestor:- STTC of advanced streamer emmision (ESE) type of lightening arrestor of covering a radious of 125 meter, when mounted at a height of 5 meter above terrace floor leve, having triggering time 63 micron second, totally atonomous device, designed to work on positively as well as negatively charged cloud condition, internal triggering circuitry & electronics should contain ambient electric field sensor, charge accumulator, command & HV amplifier, transformer & triggering release. It is designed as per NFC17-32 & IEC 60-1:1989. ESE ternimal should be tested by CPRI for the impulse current of 40KA (8/20 micro sec) with 5 positive & 5 negative impulse with folllowing specifications of capacity 200 KA (3/35 micro second ), capacity against wind speed 40m/s, dimension 39cm, lower diameter of ESE should be 30.5 cm, weight=4 kg, The ESE lightening arrestor should be should be tested in MSME-Devlopment institute, along with of 6 digit transient event counter with display digit from 0 to 999999 for a minimum count impulse greater than 1KA (8/20 micro sec) with degree of protection IP 20 with 3 earthing electrodes of 3 meter length in grid, with High Mast Pipe cooecting link &including with all required accesorries. |
| 90 | Item No 86:Supplying and erecting ISI mark GI pipe 75/80 mm dia. „B? class at position with accessories complete. Specification no. CW-PLB/GP. |
| 91 | Item No 87: Supplying and fixing MS base plate 30x30x0.6 cm size fixed to the pole base either by welding or by set screws 12 mm. dia fixed at position. |
| 92 | Item No 88:Supplying, erecting & terminating XLPE unarmoured cable 1 core 70 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel/distribution boards / pipe as per specification no. CB-LT/CU |
| 93 | Item No 89:Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq. mm. |
| 94 | Item No 90:Dismantling the existing cables of all types & size above 50 sq. mm. |
| 95 | Item No 91:Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame complete. |
| 96 | Supply, erection, testing & commissioningof street light at Jayakwadi Dam |
| 97 | Item No 92:Supplying and erecting mini feeder pillar triple pole with 200A FPMCCB as incomer and 2 outgoing circuits with HRC fuse base and cartridge of 100A consists of aluminium bus bar 500 V 200 A complete erected in 14 gauge CRCA sheet box with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation as per specification no. SW-SWR/MFP |
| 98 | Item No 93:Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 99 | Item No 94:Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 100 | Item No 95:Supplying, erecting & terminating XLPE armoured cable 3½core 70 sq. mm. aluminium conductor with continuous8.35 sq. mm. (10 SWG) G.I. earth wire complete erected withglands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 101 | Item No 96:Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB |
| 102 | Item No 97:Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no.CB-SB |
| 103 | Item No 98:Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PCC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW |
| 104 | Item No 99:Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL |
| 105 | Item No 100: Supplying and erecting LED street light fitting suitable for above 70W - 75W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FGODF/ FLS2 |
| 106 | Item No 101: Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP |
| 107 | Item No 102: Supplying and erecting 12.5 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 6 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OH-PL/HM (excluding luminaries ). |
| 108 | Item No 103: Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast). |
| 109 | Item No 104: Supplying and erecting LED Flood light fitting of 120W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FGODF/FLS-2 |
| 110 | Item No 105: Supplying and erecting outdoor stand mounted feeder pillar for highmast of the same manufacturer with 32A TPN MCB incomer, single dial timer switch, 25A TP contactor for automatic switching of luminaries, 2 nos 9A contactors andraise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete.Note:- rates are inclusive of foundation. |
| 111 | Item No 106: Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 112 | Item No 107:Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP. |
| 113 | Item No 108:Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq. mm. |
| 114 | ON Grid solar power pack |
| 115 | Item No 109:Supplying, installing, testing and commissioning of 20 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete, with 5 years on site performance warrantee. Specification no. ESD-RT-ONG Note:-2. For item no.4-6-2 add Rs. 39657/- per kWp for ON grid solar power pack above 11 kWp upto 100 kWp. |
| 116 | Item No 110 :Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 117 | Item No 111 :Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SWSWR/MCB |
| 118 | Item No 112: Supplying and erecting three phase 10 to 60 A net meter DLMS compliance of accuracy class 1.0, 3 x 240V, 50 Hz, with backlit LCD display, optical port and RJ 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh,V, I, kW, 6 months history of energy) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. |
| 119 | Item No 113: Supplying and erecting Three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PCC wires. |
| 120 | Item No 114: Charges for taking permission from various authority such as MSEDCL or else. ( It will be reimbursed only after submission of original reciepts by the contractor to this department.) |
| 121 | Part B |
| 122 | Sub Estimate B:Electrification of IRB Guest House at Paithan,Dist.Chatrapati Sambhajina-gar. |
| 123 | Item No 115: Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 124 | Item No 116 :Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 125 | Item No 117 :Secondary point wiring for additional light/ bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW |
| 126 | Item No 118 :Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 127 | Item No 119: Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW |
| 128 | Item No 120: Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
| 129 | Item No 121: Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 130 | Item No 122:Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
| 131 | Item No 123:Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete |
| 132 | Item No 124:Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/30A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron/ GI frame. |
| 133 | Item No 125:Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 134 | Item No 126:Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 135 | Item No 127:Supplying and erecting PVC Surface modular switch box with doublemounting plate for 12 module duly erected |
| 136 | Item No 128:Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected. |
| 137 | Item No 129:Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected |
| 138 | Item No 130:Supplying and erecting PVC Surface modular switch box with doublemounting plate for 2 module duly erected. |
| 139 | Item No 131 :Supplying and erecting modular type blanking plate one module, duly erectedon provided plate & box |
| 140 | Item No 132: Supplying and erecting LED square / circular Max. 7W down lighter/ PanelLight having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete with 3 years warranty |
| 141 | Item No 133: Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. |
| 142 | Item No 134 :Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base |
| 143 | Item No 135 :Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size. |
| 144 | Item No 136:Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200mm complete erected in position as per specification no. FG-FN/CF |
| 145 | Item No 137:Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. |
| 146 | Item No 138:Supplying and erecting Exhaust fan heavy duty 230 V A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as perspecifcation no. FG-FN/EXF |
| 147 | Item No 139:Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC |
| 148 | Item No 140:Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 2.1TR to 2.3TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC |
| 149 | Item No 141:Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 2500 VA digital pure sine wave inverter with backup time of ........ hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as perspecification no. AP-INV |
| 150 | Item No 142:Supplying and erecting 12V/200Ah tubular battery with battery terminal wire,duly charged with 36 months warranty complete |
| 151 | Item No 143:Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 152 | Item No 144:Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 153 | Item No 145:Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 154 | Item No 146:Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 155 | Item No 147: Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places. as per specification No: WGMA/ BW |
| 156 | Item No 148 : Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 157 | Item No 149 : Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 |
| 158 | Item No 150 : Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 159 | Item No 151 :Supplying, erecting & commissioning 4 pole RCCB 80A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as perspecification no. SW-RCCB/RCCB |
| 160 | Item No 152 : Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB |
| 161 | Item No 153: Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB |
| 162 | Item No 154: Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 163 | Item No 155:Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 164 | Item No 156:Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specificationno. SW-SWR/MCB |
| 165 | Item No 157: Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 166 | Item No 158: Supplying and erecting blanking plate of suitable size on MCBDB |
| 167 | Item No 159: Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 168 | Item No 160: Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 169 | Item No 161: Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 170 | Item No 162:Providing & erecting 4Pole MCCB, 415 V, 100A, rated short-circuit breakingcapacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixedmagnetic setting with provided leads, provision for installation of shunt/UV/tripalarm contact. MCCB with phase barriers on both sides, insulation withstandcapacity 800V, no line-load bias in provided enclosure/panel as per specificationno. SW-SWR/MCCB |
| 171 | Item No 163:Dismantling the existing light, fan, bell, clock, independent plug point,wiring including circuit mains of all types along with accessories etc.complete as per specification No: WG-DM/PW |
| 172 | Item No 164: Dismantling the existing aluminium/copper mains, sub-mains wiringupto 10 sq.mm. along with accessories etc. complete as per specification No:WG-DM/PW |
| 173 | Item No 165: Dismantling the existing W.T. fluorescent fitting / S.V./ M.V. / M.H. lamp/LED fitting from wall with brackets and making the site as original complete. |
| 174 | Item No 166:Dismantling the existing ceiling fan /exhaust fan / cabin fan / bracket fancomplete with accessories, G.I. down rod, frame etc. and making the site clear |
| 175 | Item No 167:Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame complete. |
| 176 | Item No 168: Making the site clear of dismantled DB and switch gears by refilling the holes with cement mortar & finishing in an approved manner complete. |
| 177 | Item No 169:Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cmcomplete with all materials, testing & recording the results as per specification no.EA-EP |
| 178 | Item No 170:Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the resultsSpecification no. EA-MOBI |
| 179 | Item No 171 : Supplying and erecting GI wire of high purity of required sizes used for earthingor any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.. |
| 180 | Item No 172 : Providing & erecting 9 m high (clear height) galvanised octagonal pole withfoundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 181 | Item No 173:Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2 |
| 182 | Item No 174:Making cement concrete foundation including excavation (60 x 60 x 150) cmeep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles) |
| 183 | Item No 175:Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 184 | Item No 176 : Supplying and erecting Street light bracket for erection of Single fitting madefrom 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC |
| 185 | Item No 177 : Dismantling the existing pole above 6 m height with brackets, clamps,insulators, stay from the c.c. foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. |
| 186 | Item No 178: Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 187 | Item No 179: Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no.EA-EP |
| 188 | Item No 180 : Supplying and erecting integrated LED street light fitting 26 to 30W IP65 IK08 class having single piece pressure die-cast aluminium housing , havingsystem lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W,CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V,inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 189 | Item No 181 :Supplying and erecting modular type bell indicator, duly erected on provided plate and box with wiring connections complete. |
| 190 | Item No 182 :Supplying and erecting ultra violet storage type water purifier (RO+UV+UF)with softener for safe drinking water consisting of UV germicidal tube of 8Wcapacity choke made of copper wire and two indicator lamps with output ofpurified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter changeindication system .(for TDS more than 200) |
| 191 | Item No 183: Supplying, erecting, testing and commissioning self contained water cooler230/250V 50Hz nominal cooling capacity of 150 litres per hour and storagecapacity 150 litres with partially stainless steel body as per specification no. APWCR/WC |
| 192 | Item No 184: Supplying and erecting storage type water heater 25 litres capacity havingstanding loss <0.511kWh/24hour/45°C, high impact resistance engineeringplastic body with anti corrosive high grade steel inner tank, heatingelement having hard water & corrosion protection, with minimum 3 safetyprotections (i.e. thermostat & thermal function cut-out, valve) with totalpressure 8 bar withstanding capacity duly tested and marking sr. no. and date of |
| 193 | Item No 185: Supplying double door refrigerator domes-tic type of 300 to 360 litres storagecapacity, minimum 5 Star inverter type, stabilizer free operation suitable foroperation on 100V/300 V, 50Hz with automatic temperature con-trol, shall bemarked on unit for sealed unit in refrigeration system and marking sr. no. and date of erection complete |
| 194 | Item No 186:Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
