Haridwar Development Authority has published Tender For Supply Installation Testing Commissioning Of Façade Lighting Of Cable Stayed Bridge Haridwar. Submission Date for this Tender is 07-10-2023. Bridge Work Tenders in Haridwar Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Sep-2023 | Date Extension | Date | 07-10-2023 |
| Sl. No. | Item Description |
| 1 | Supply Instalation testing & commissioning of LED Pixel DOT for Media Facade lighting, Power: 1.4W per pixel,Operating voltage: 12V/ 24V, Source: 2RGB + 1W, Diffuser: Milky white, Housing: Engineering plastic, IP rating: IP66, Installation: Mounting seat/ Steel wire/ Front clips (Included), Control: SPI/ DMX512; Lumen maintenance of at least L70@50,000 burning hours at 35°C. Ingress Protection = IP 67. Impact resistance level = IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : - 30 °C to +45 °C, Operating Humidity : 10% - 90%. THD should be less than 10%. SITC work including all theconnectors, jumper cables, accessories,complete anti-theft mounting mechanism, as approved by the department. |
| 2 | Supply Instalation testing & commissioning of DMX controlled 3-Bar, LED Flood Light Fixture, Power: 150W per module; Operating voltage: 24V, CCT: RGBW, Beam angle: as per site requirement, Housing: Die-cast/ extruded aluminium with separate compartment for driver/ decoder, IP rating: IP67, IK rating: IK07, Surge Protection: 2KV-4KV, Control: DMX512 (4Channel) Color rendering index CRI = 80 for white LEDS"s and power factor of complete luminaire = 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 35°C. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : - 30 °C to +45 °C, Operating Humidity : 10% - 90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. SITC work including all theconnectors, jumper cables, accessories,complete anti-theft mounting mechanism, as approved by the department. |
| 3 | SITC of high quality Supply Instalation testing & commissioning of Homogeneous LED Flexible Linear Light Wattage 14-16W with high quality circuit design for stable and reliable performance, surface material should be made of Silicon with aluminium extrusion linear profile and other connecting accessories, Surface mounted flexible linear light suitable for facade edge lighting, Symmetric distribution. luminaire should have diffuse silicone based cover for soft illumination. Rated input supply of DC 24V constant voltage with external LED Driver, External ballast as accessory must be provided separately, Output color should be RGBW. The luminaire should have versatile optics : 120°, Mean rated service life L70(tq 25 °C) = 50,000 h. Luminaire body of aluminium extrusion with aluminium components. With flush-fitting cover and integral LED unit. Colour of luminaire body Grey/Silver, highly weather resistant/ powder-coated. Ingress protection rating : IP68, Luminaire is inclusive of Integralmale/femalewaterproof connectors with structures in pre wired conditions as per IS standard. LM79, Type Test Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector.impact resistance level should be suitable to site condition. SITC work including all theconnectors, jumper cables, accessories,complete anti-theft mounting mechanism, as approved by the department. |
| 4 | Supply, Installation, testing and commissioning of DMX controller, shall be supporting PC and SD card based integrated control; works with sub controllers, can switch freely between PC control and SD card control automatically, when needed. Main controller shall be having Ethernet facilities to communicate with PC, multi- zone programming and SD memory card for preset control. Main controller shall be having capacity of controlling upto 5,00,000 pixels via Sub controllers. |
| 5 | Supply, Installation, testing and commissioning of DMX Sub controller. Sub controller shall be capable of controlling multiple protocols like-TTL/ SPI/ DMX. The 8-universe controller shall be capable to work with PC as well as Main Controller. Sub controller shall be having Ethernet facilities. Sub-controller shall be having facility to address the fixutes on each port. Sub-controller shallbe capable of working with multiple type chips. |
| 6 | Supply, Installation, testing and commissioning of 4CH, DMX Splitter cum amplifier(Can be used as an isolator as per site) |
| 7 | 5-pin "T" Jointer |
| 8 | 5-pin "I" Jointer |
| 9 | 3 pole IP65 power cable "I" connector |
| 10 | 3 pole IP65 Signal cable "I" connector |
| 11 | 3/4/5 pole IP65 power cable "T" connector |
| 12 | 3/4/5 pole IP65 Signal cable "T" connector |
| 13 | Power junction box for mounting Power supplies, complete with control MCBs |
| 14 | Power junction box for mounting Controllers/ Decoders, complete with control MCBs |
| 15 | Supply, laying and Fixing of weatherproof Copper 4 Pair UTP Cat-6 Cable for DMX data transfer with Weather Proof IP Boxes including weatherproof connectors and laying of wires in existing conduits or trenches as |
| 16 | 3C X 1.5 Sq.mm. PVC insulated, PVC sheathed, armoured/unarmoured, and stranded copper conductor cable 1100V grade, of ISI Marked as required. |
| 17 | 3C X 2.5 Sq.mm. PVC insulated, PVC sheathed, armoured/unarmoured, and stranded copper conductor cable 1100V grade, of ISI Marked as required. |
| 18 | Supply and Laying of one number 4 core x25 q mm Aluminium Armoured PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground or pipe or trench as required including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 19 | Supply and laying of 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 20 | Supply and fixing 25mm MS grey box conduit ISI marked FRLS along with the accessories in concealed system etc. as required. The colour to be matched with the bridge texture. |
| 21 | Supply and fixing Power Supply Unit of 24 v6.3A, 200 watt |
| 22 | Supply of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete. The instrument chamber shall be saprate and shall comprise of Multifunction meter and current transformer etc. The board shall have suitable cappcity electrolytic aluminium bus bars as per IS:8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC /DMC supports with detchable side covers and shall be suitable for extension on the sides .the switches shall be complete with suitable with cable and boxes ,revers entry boxes in case of pedestal type cable socket compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer Incharge The switch board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm cubical type switch board shall be of Cat A, B & B = II only outdoor type with following incomming and outgoings INCOMMING MCCB-100Amp TPN-01 Multifunction meter-01 RYB Indicators-01Set Digital control Servo Voltage Stabalizer of 40KVA oil type with voltage range from 260Volt to 480VoltOUTGOING 63 Amp DP MCB- 08 No 15Amp Combined Socket-04No Space for company DMX Splitter |
| 23 | Providing earthing with copper earth plate, 600mmX600mmX3mm thick with all accessories, providing masonry enclosure with cover plates having locking arrangement & watering pipe of 2.7m long, with charcoal/coke and salt, complete with all materials, , |
| 24 | Programming, testing and commissioning and maintenance of scenes for 3 years with programming of different color patterns as per engineer in charge. |
| 25 | Installation & Integration of control room (Porta Cabin) of required size with Air-conditioningsystemof appropriate capacity in Control room to maintain temperature for coolingof equipments3 star BEE rated 1.5 ton or higher capacity split AC with inverter technology stabilizer free operation and all necessory requirements for show control. |
| 26 | Installation, mounting arrangements with all the required accessories, Crane hiring, Scaffolding and training of the complete illumination system for the Bridge; as per show requirement. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
