Public Works Department-PWD has published Under The State Scheme, The Work Of Renovation/Asphaltization Of The Main Road In Meetha Amla Of Kaladhungi Assembly Constituency And The Road From Jai Ma Malika Hardware Shop In Bagnath Vihar Near Pushp Vihar, Ghuni No. 1 To The House Of Shri Naveen Chan. Submission Date for this Tender is 22-09-2023. Road Work Tenders in haldwani Uttarakhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Mord3-14) |
2 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401 For Grading II Material (Mord4-1-A-2) |
3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density. as per Technical Specification .[Grading of no-2] (45-63 mm size)By Mechanical Means (Mord 4-7-2-B) |
4 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density. as per Technical Specification .[Grading of no-3] (22.4-53 mm size). By Mechanical Means (Mord4-7-3-B) |
5 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.(Mord 5-2-2) |
6 | 20 mm thick Open Graded Premix Carpet using Bitumen Emulsion as per Technical Specification Clause 508.2 (Mord 5-10) |
7 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510 By Mechanical Means case II type B Bitumen(VG-30) as per direction of Engineer-in-Charge.(MORD 5-12-B-B-2) |
8 | (Edging with 2nd class bricks, laid dry lengthwise, including excavation, refilling, consolidation, with a hand packing and spreading nearly surplus earth within a lead of 50 metres)(Morth 11-15) |
9 | Construction of K.C. type drain as per Drawing (Drawing attached) of M-20 grade cement concrete precast kerb stone of size 15x40 cm. with M-20 grade cement concrete precast base slab 50 cm. wide and 10 cm. thick over 7.5 cm. thick cement concrete |
10 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary soil Manual Means |
11 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix 1:3:6 |
12 | Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 Brick masonry in 1:4 cement mortar |
13 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix (1:2:4) |
14 | Plastering with cement mortar (1:4), 15 mm thick on brick work substructure as per technicalSpecification Clauses 613.4 & 1204 |
15 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 For R.C.C M-20 |
16 | Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202. (The reinforcement steel shall be as per clause no. 2011.3.1 of MORD specifications (First Revision"2014) and IS 1786:2008 clause no. 1.6) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail