Tender For Repair/ Replace Of Damaged Border Security Fence In Aor Of ( Bp Ref -9/16 To 9/18)Of Bop Jaitpur Of 121 Bn Bsf Under Shq Bsf Gsp (Pb) (Length -500 Mtr B S Fence)
Tender Value
39.85 Lakhs
Estimated cost
Bid Submission
27 Sep 2023
0 days left
EMD
79720
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaitpur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/ Replace Of Damaged Border Security Fence In Aor Of ( Bp Ref -9/16 To 9/18)Of Bop Jaitpur Of 121 Bn Bsf Under Shq Bsf Gsp (Pb) (Length -500 Mtr B S Fence)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 8 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). |
| 11 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 12 | Supplying and fixing turn buckles and straining bolts for barbed wire fencing. |
| 13 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. |
| 14 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 15 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 16 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. |
| 17 | Providing & fixing G.I. barbed wire of size 2.50 x 2.00 mm (weight to be not less than 108 gms per metre length) conforming to IS-278-1978 and stretching with existing MS hooks/ tightening bolts to angle iron posts in holes already drilled with spilt cotter pins 5 x 22 (confirming to IS 549 steel) i/c necessary painting by dipping in paint twice with anticorrosive bitumastic paint (IS-158) of approved brand and manufacture in black shade to give a smooth and even surface complete as per direction of Engineer-in-charge. (Single length of barbed wire to be measured for payment). |
| 18 | providing, laying and fixing galvanized punched tape concertina coil, 1050 mm dia (when closed) weighting not less than 15.2 kg each coil, having galvanized spring cold drawn steel coil wire of 2.5 mm dia, galvanized punched tope of low carbon steel having series of sharp barbs uniformly punched along its length having 550 nos. of barbs on periphery per revolution and crimped on steel spring core wire. having G. I. steel wire handles hooked to coil for handing & M.S. square bars hooked with coil having pointed face for anchorage,including spreading each coil uniformly in 10 meter length, including adequately tying to the existing G.I. barbed wire fencing with G.I. wire of not less than 16 gauge at every 1m spacing, tying the handles of succeeding coil with preceding coil with G.I. wirenot less than 16 gauge, proper anchoring of spikes at start andend of the coil in C.C.allas par directions of Engineer-in-charge |
AI Tender Summary
Tender Timeline
Sep 15, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender