Science and Technology Government Departments Closing in 0 days TDR #39678594

Tender For Annual Maintenance Rate Contract And Minor Civil Works At Arci, Hyderabad

Issued by Government Departments · balapur, Telangana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Oct 2023
0 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
balapur → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Annual Maintenance Rate Contract And Minor Civil Works At Arci, Hyderabad

BOQ

Name of Work: ANNUAL MAITENANCE RATE CONTRACT AND MINOR CIVIL WORKS AT ARCI, HYDERABAD (PART - A, BoQ)
Sl. No. Item Description
1ANNUAL MAINTENANCE RATE CONTRACT AND MINOR CIVIL WORKS (PART A)
2Site clearance of work spot:- ITEM CODE :-304004004 Site clearance of work spot including removing of trees, up to bottom level, removing of bushes, felling of the girth ,Removing of the roots and stacking of serviceable material and disposal of surplus unserviceable soil / trees / bushes of debris up to 1KM or site chosen by Engineer-in-Charge including labor etc., complete for finished item of work.
3Earthwork in excavation:- ITEM CODE :-304004005 Earthwork in excavation of foundations for buildings, structures, drains, manholes, chambers, pavements,, basements, etc., including all lifts in both wet and dry condition, bailing out water, shoring, strutting(if required), stacking/disposal of surplus and un serviceable soil within a lead of 500m & spreading in layers and as per specificationsand direction Engineer. In all soils including soft rock/disintegrated rock and hard rock. The excavated earth which is to be used for back filling shall also be disposed and stacked separately at locations indicated by the Engineer within a lead of 1KM:
4Control filling with same soil:- ITEM CODE :-304004006 Controlled filling / back filling with mechanical compaction to achieve dry density of 95% modified proctor density in all positions under floors, foundations and other places as required by the engineer with approved earth or approved fill material brought from elsewhere from spoil heaps, if approved by the engineer,at all heights / depths including transporting, depositing, compacting, dressing, trimming etc., complete as desired in layers not exceeding 150mm including watering, consolidating by mechanical means as per specifications and instructions of the engineer. (The theoretical volume multiplied by 0.95 shall be considered for payment.).a)with available soil from the stock piles within a lead of 1 Km.
5Control filling out side soil:- ITEM CODE :-304004007 Controlled filling / back filling with mechanical compaction to achieve dry density of 95% modified proctor density in all positions under floors, foundations and other places as required by the engineer with approved earth or approved fill material brought from elsewhere from spoil heaps, approved by the engineer,at all heights / depths including transporting, depositing, compacting, dressing, trimming etc., complete as desired in layers not exceeding 150mm including watering, consolidating by mechanical means as per specifications and instructions of the engineer. (The theoretical volume multiplied by 0.95 shall be considered for payment.).a).with the soil of approved quality brought from outside.
6Dismantling / cutting of Brick wall:- ITEM CODE :-304004009 Dismantling / cutting of Brick wall / Lime sand brick walls,/stone masonry and disposal of dismantled materials up to 2KM lead including cost of hire charges of cutting equipment, labor charges etc complete finished item of work
7Dismantling / cutting of RCC items:- ITEM CODE :-304004010 Dismantling / cutting of RCC items / RCM Drops and cutting of different dia of reinforcement bars, disposal ofdismantled materials up to 2KM leadincluding cost of hire charges of cutting equipment, labor charges etc complete finished item of work including stacking of the used material at designated place as advised by the engineer in charge.
8Dismantling/Removing of doors:- ITEM CODE :-304004011 Dismantling/Removing of doors, windows, Ventilators and clerestory windows (steel / Alu or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 1.0km leadPrepare the surface to receive new finish as per drawings and specifications.
9PCC (1:2:4):- ITEM CODE :-304004012 PCC (1:2:4) prop. using 12 to 20mm size well graded HBG machine crushed chips in foundations and other mass concrete works, manholes, channels, screeds, steps, etc. including cost and conveyance of all materials labor charges centering/shutteringcharges machine mixing charges curing and all other incidental and operational charges etc.1.Sand: Only River Sand2.Cement: Ultratech / Ambuja /Bharathi cement
10PCC(1:4:8):-ITEM CODE :-304004013 P.C.C(1:4:8) proportion using 40mm nominal size well graded HBG metal all leveling courses under foundations, and flooring, including centering / shuttering cost and conveyance of all materials approved source to site mixingconcrete, laying, tamping and curing etc., complete for finished item of work.Use River sand & Cement:- Ultratech / Ambuja cement/Bharathi
11PCC(1:5:10):- ITEM CODE :-304004014PCC(1:5:10) proportion using 40mm nominal size well graded HBG metal all leveling courses under foundations, and flooring, including centering / shuttering cost and conveyance of all materials approved source to site mixingconcrete, laying, tamping and curing etc., complete for finished item of work.Use River sand & Cement:- Ultratech / Ambuja cement/Bharathi
12V.R.C.C(1:1.5:3):- ITEM CODE :-304004016 prop , using 12 to 20mm size well graded HBG machine crushed chips at all depths, heights and levels in all types of foundations, footings, columns up to parapet level, plinth beams, Tie beams, lintel beams, gradeSlabs, cable trenches, and any other super structures including centering / shuttering charges cost and conveyance of all materials to site, labor charges, vibrating charges, curing with wet hessian cloth and all other incidental and operational charges etc. complete but excluding cost of steel and its fabrication chargesUse River sand & Cement:- Ultratech / Ambuja cement/Bharathi
13R.C.C(1:2:4):- ITEM CODE :-304004017 R.C.C(1:2:4) prop using 12 to 20mm size well graded HBG machine crushed chips at all depths, heights and levels in all types of foundations, footings, columns up to parapet level, plinth beams, Tie beams, lintel beams, gradeSlabs, cable trenches, and any other super structures including centering / shuttering charges cost and conveyance of all materials to site, labor charges, vibrating charges, curing with wet hessian cloth and all other incidental and operational charges etc. complete but excluding cost of steel and its fabrication charges Use River sand & Cement:- Ultratech / Ambuja cement/Bharathi
14MS or TOR Steel:- ITEM CODE :-304004018 Supply ,Fabricating and fixing in position HYSD / MS or Tor Steel reinforcements of various diameters at all levels and positions including cost of straightening, cutting, laying, bending, cranking and tying with GI wire after placing in positions directed by the Engineer-in- charge including cost and conveyance of steel and GIwires lifting, labor charges and concrete cover blocksetc. Use steel-Tata tisco/VSP/Sail Steel only
15Structural Steel:- ITEM CODE :-304004019 Supply fabrication and erection of ANY TYPE OF structural steel elements such as Structural steel columns ,beams, stair cases ,angular ladders, fabrication of trussand other minor structural members using angles sections, I Beams, channel sections ,chequered plates, insert plates ,gusset plates, MS Sheets ,MS Pipes, box sections, all as per specifications including drilling of holes cutting fixing of bolts, nuts, washers, proprietory anchor fasteners/bolts , welding loading transportation and unloading chargesincluding one coat of primer coat and two coats of synthetic enamel paint Asian paint of approved quality etc.Use steel-Tata tisco/VSP/Sail Steel /appolo only
16WIRE MESH:- ITEM CODE :-304004020 Supply, fabricating and fixing of welded steel wire mesh /weld mesh (25x25xmm at 13 guage) inclduing two coats of synthetic enamel paint over primary coat, welding charges, labour charges etc. MAKE-CHAMPAIN OR EQUIAVALENT
1750MM DIA MS PIPE:- ITEM CODE :-304004021 Supply and fixing of MEDIUM CLASS 50mm dia meter tubular purling, vertical umbers tie runner wind bracing\"s in position at site of work with the M.Stubes of requisite size grade class weight as IS 1161 and IS 806 with 8mm thick cleat plates of suitable size at the ends of every member to connected at appropriate place by means of 12m dia bolts and nuts and including one coat of red oxide paint and two coats of synthetic enamel paint of approved color. MAKE:Tata/Jindal
18Brick Masonry:- ITEM CODE :-304004022 BRICK MASONRYin sub-structure/ super structures of all thickness in cement mortar (1:6) Prop. Using best quality table molded bricks(light weight bricks) with frog/indent, conforming to sub-class A as per IS:1077 having crushing strength of not less than 50 kg/cm2 in cement mortar 1:6 best quality table molded bricks from approved source including cost and conveyance of all materials to site scaffolding, labor charges, racking out joints, curing, cement etc. complete for all heights. Use First quality brick, River sand & Ultratech / Ambuja cement/bharathi cement
19Half Brick Masonry:- ITEM CODE :-304004024 Providing brick work of half-brick thickness using first quality table molded bricks(light weight bricks) with frog/indent, conforming to sub-class A as per IS:1077 having crushing strength of not less than 50 kg/cm2 in cement mortar 1:4 using 2 tor steel bars (8 mm ) embedded in CM at every 900mm height in partition walls, chambers, other works of all shapes, plinths and super structure at all depths and heights as per specifications includingscaffolding, labor charges, racking out joints, curing, etc., all complete as per specifications, and directions of Engineer.Use First quality brick, River sand & Ultratech / Ambuja cement/bharathi
20C.R.S.Masonry(1:6) :- ITEM CODE :-304004025 Providing coursed rubble stone masonry in cement mortar of the following proportion in all types of works at all heights and depths with curing, etc., all complete as per specifications and directions of the Engineer. C.M(1:6) Use River sand & Ultratech / Ambuja cement/bharathi
21R.R(1:6) :- ITEM CODE :-304004026 Providing Random rubble masonry in cement mortar of the following proportions in all types of works at all heights and depths with curing, etc., all complete as per specifications and directions of the Engineer.C.M(1:6) Use River sand & Ultratech / Ambuja cement/bharathi
22D.P.C:- ITEM CODE :-304004029 Providing 40mm thick D.P.C over plinth with concrete of grade M-20D and mixing approved water proofing admixture with cement as per manufacturer\"s specifications, including necessary formwork/shuttering, one coat of hot bitumen of grade 80/100 over the top surface of DPC and all necessary by works complete all as per specifications and directed by the Engineer. Use River sand & Ultratech / Ambuja cement/bharathi
2320MM THICK PLASTERING:- ITEM CODE :-304004031 Providing 20mm thick cement-sand plaster in two coats, backing coat 15mm thick (1:6) and finishing coat 5mm thick, finished smooth at all depths and heights in 1:3 proportion in backing coat as well as finishing coat, providing chicken mesh at RCC & masonry joints, necessary dabbing, curing, 10x10mm Grooves as required including scaffolding complete as per specifications. (for all heights ). The plaster work shall be true to the plumb and square and contractor shall provide proper gauges prior to start of work for approval. Use River sand & Ultratech / Ambuja cement/Bharathi
2415MM THICK PLASTERING:- ITEM CODE :-304004032 Providing 15mm thick cement-sand plaster smooth finish at all depths and heights in the following proportion on walls, pillars, projection bands, cable trench inner surfaces, cornices etc. including 10x10mm grooves as required, providing chicken mesh at RCC & masonry joints, necessary dabbing, curing, scaffolding complete for internal walls & ceiling as per specifications. The plaster work shall be true to the plumb and square and contractor shall provide proper gauges prior to start of work for approval. In Cement Mortar (1:3)for the ceilings. Use River sand – Cement- Ultratech / Ambuja cement /Bharathi
25Lathe Plastering:- ITEM CODE :-304004033 Providing the following thickness lath plaster at all heights and locations for vertical fins, facias, bands, drop\s, etc., consisting of cement-sand plaster of proportion 1:3, including finishing the exposed faces smooth, provision of wire mesh to reinforcement bars, necessary shutting, surface preparations, etc., all complete and as per directions of the Engineer. The steel reinforcements shall be paid under reinforcement item. A) 40mm thick Use River sand & Ultratech / Ambuja cement/Bharathi
26Spirit polish:- ITEM CODE :-304004038 Providing and applying superior quality Spirit polish of approved make onwood work including necessary wood filter ,surfac preparation ,all complete to desired finish at all locations and as disered finish at all locations and as per specifications and direction of the engineer
27SYNTHETIC ENAMEL PAINTING:- ITEM CODE :-304004039 providing and applying synthetic enamel paint of asainmake and shade to desired finish as per specifications and directions of the engineer. Make:Asain/Berger
28Premium emulsion paint:- ITEM CODE :-304004040 Providing and applying 2 coats of Premium emulsion paint of Asain make (colour shades as perOwner)over a one coat of primer as per specifications of the manufacturer. The rate shall include the cost of the priming coat and two coats of Birla make, “Wallcare”, White cement based putty or equivalent & two coats of painting with necessary surface preparation. Including (any old walls) old surface scrapping, brushing, removing paint marks over windows, doors, flooring etc. complete. Makes:Asian make equivalent Berger paints
29Tractor emulsion paint:- ITEM CODE :-304004041 Providing and applying 2 coats of Tractor emulsion paint of Asain make (colour shades as perOwner)over a one coat of primer as per specifications of the manufacturer. The rate shall include the cost of the priming coat and three coats of Birla make, Wallcare, White cement based putty or equivalent & three coats of painting with necessary surface preparation. Including (any old walls) old surface scrapping, brushing, removing paint marks over windows, doors, flooring etc. complete. Makes:Asian make equivalent Berger paints
30Apex Ultima:- ITEM CODE :-304004043 Painting with weather proof emulsion paint, water based, modified acrylic paint of Apex Ultima (Asian make ) to exterior faces of new walls with three coats of approved make shade and color including self-prime coat including cost and conveyance of materials like paint to site including cost of brushes, scaffolding charges, lift charges and labor charges such as preparing the wall, applying three coats of paint etc. complete for finished item of work in all floors, including old surface scrapping and removing of old paints etc. complete. Makes:Asian make equivalent Berger paints
31APEX PAINTING:- ITEM CODE :-304004044 Painting with weather proof emulsion paint, water based, modified acrylic paint of Apex(Asian make ) to exterior faces of new walls with three coats of approved make shade and color including self-prime coat including cost and conveyance of materials like paint to site including cost of brushes, scaffolding charges, lift charges and labor charges such as preparing the wall, applying three coats of paint etc. complete for finished item of work in all floors, including old surface scrapping and removing of old paints etc. complete. Makes:Asian make equivalent Berger paints
32Vitrifiedtiles-double charged:- ITEM CODE :-304004047 Providing and laying 12mm thick glossy finished color 1stclass Vitrifiedtiles-double chargedof 2’X2’ in flooring, skirting, dado and in other placeslaid on 20 mm thick cement mortar bed or backing of mix 1:3, with joints properly aligned, filled with proprietary cement grout of approved shade and color (laticrete or Bal endura make ) at all levels and locations to different patterns as per specifications ,and direction of the Engineer all complete. Tiles shall be beveled at the vertical corner joints and horizontal edge joints. Top of skirting/dado shall be finished smooth to line and level. For Flooring &Skirting Vetrified tiles:- Johnson make, Nitco make, Khazaria Use River sand & Ultratech / Ambuja cement, Jointing same color grout material
33Vitrifiedtiles-Single charged/Nano:- ITEM CODE :-304004048 Providing and laying 12mm thick glossy finished color 1stclass Vitrifiedtiles-Single charged/Nanoof 2’X2’ in flooring, skirting, dado and in other placeslaid on 20 mm thick cement mortar bed or backing of mix 1:3, with joints properly aligned, filled with proprietary cement grout of approved shade and color (laticrete or Bal endura make ) at all levels and locations to different patterns as per specifications ,and direction of the Engineer all complete. Tiles shall be beveled at the vertical corner joints and horizontal edge joints. Top of skirting/dado shall be finished smooth to line and level. For Flooring &Skirting Vetrified tiles:- Johnson make, Nitco make, Khazaria Use River sand & Ultratech / Ambuja cement, Jointing same color grout material
34Ceramic floor&Dado tiles -300x300mm:- ITEM CODE :-304004049 Providing and laying 300x300x7mm thick matt finished/ antiskid Ceramic floor tiles (First quality) of approved color and shadein flooring. For wall Dadoing ceramic tile of approved color and shade shall be used. The tiles shall be laid on 12mm thick cement mortar bed for the dado and 25 mm thick for the floor with a C.M of mix 1:3, with joints properly aligned, filled with white cement slurry with matching pigment, at all levels and locations to different patterns as per specifications, and direction of the Engineer all complete (glossy or mat finish as required). Tiles shall be beveled at the vertical corner joints and horizontal edge joints. Top of skirting/dado shall be finished smooth to line and level. Ceramic tiles:- Johnson make, Nitco make, KhazariaUse River sand & Ultratech / Ambuja cement, Jointing same color proprietary grout material.
35Ceramic floor&Dado tiles -400x400mm:- ITEM CODE :-304004050 Providing and laying 400x400x7mm thick matt finished/ antiskid Ceramic floor tiles (First quality) of approved color and shadein flooring. For wall Dadoing ceramic tile of approved color and shade shall be used. The tiles shall be laid on 12mm thick cement mortar bed for the dado and 25 mm thick for the floor with a C.M of mix 1:3, with joints properly aligned, filled with white cement slurry with matching pigment, at all levels and locations to different patterns as per specifications, and direction of the Engineer all complete (glossy or mat finish as required). Tiles shall be beveled at the vertical corner joints and horizontal edge joints. Top of skirting/dado shall be finished smooth to line and level. Ceramic tiles:- Johnson make, Nitco make, Khazaria Use River sand & Ultratech / Ambuja cement, Jointing same color proprietary grout material.
36Granolithic flooring:- ITEM CODE :-304004053 Providing and laying Granolithic flooring with total thickness as given below, laid in panels at all locations and heights including treads of steps, nosing, landing slab etc. with under -bed consisting of plain cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone chips, 12mm & down) and topping of mix 1:1:1 (1 cement : 1 medium sand : 1 fine stone grit (3mm to 6mm size) and finished with a floating coat of neat cement @ 2.20 Kg of cement per M2 of flooring), supplying and fixing 1.5mm thick aluminium strips for full depth, chequering in floor (finish inclusive if rquired, rounding, sloping, curing finishing, preparation of slab, steps, etc., all as per specifications and directions of the Engineer.Total thickness -50mm Use River sand & Ultratech / Ambuja cement,
37P.V.C Flooring:- ITEM CODE :-304004054 Providing and laying poly vinyl chloride sheet 2mm thick (\"WONDER Floor\"/ARM STRONG or equivalent conforming to IS : 3462) of approved shade and sizes using approved rubber based adhesive including rolling with a light wooden roller weighing about 5kg., and shall be pressed properly to avoid undulations and air bubles ,to correct line and level ,all complete as directed by the engineer.Thejoints between the sheets shall be suitably fused /cautered to make the entire surface seamless .the base surface shall be cleaned thoroughly to make it absolutely dust free and damp free before laying of the sheets .the entire surface shall be thoroughly cleaned with cleaning liquid and soap water before handling over .The measurement shall be as per net surface area in laid condition
38Granite flooring for Stair case and toe wall top :- ITEM CODE :-304004059 Providing & laying polished granite stone flooring using 18 mm thick machine cut & mirror polished granite treads/risers/sills/ledges 300-450mm wide in one or two pieces (each piece not less than 6\" length), square cut nosing slightly softened byrounded / chamfered as required in one piece or long length as directed, set in cement mortar (1:4) and in average thickness of 30mm fixed with cement float,including grooves,etc. complete as directed .The Rate is including cost and conveyance of all materials, labour charges and all operational, incidental charges etc., complete for finished item of work. Base price of stone to be considered at Rs.2000/sq. mt Use River sand & Ultratech / Ambuja cement,
39Minor repairing of rolling shutters:- ITEM CODE :-304004067 Minor repairing of rolling shutters of any size including major repairs to make normal functioning operation of shutters including necessary minor materials cost and conveyance all materials labour charges etc.,
40Major repairing of rolling shutters:- ITEM CODE :-304004068 Major repairing of rolling shutters of any size including major and minor repairs to make normal functioning operation of shutters including necessary minor materials cost and conveyance of all materials labour charges etc
41UNSKILLED LABOUR:- ITEM CODE :-304004072 Providing UNSKILLED LABOUR with necessary working tools and equipments
42SKILLED LABOUR:- ITEM CODE :-304004073 Providing SKILLED manpower with necessary working tools and equipments
43MASON:- ITEM CODE :-304004074 providing MASON manpower with necessary working tools and equipments
44STONE CUTTER/CHIPPERS:- ITEM CODE :-304004075 Providing STONE CUTTER/CHIPPERSwith necessary working tools &eqipments
45CARPENTER :- ITEM CODE :-304004076 Providing CARPENTER with necessary working tools and eqipments.
46PLUMBER:- ITEM CODE :-304004077 providing PLUMBER with necessary working tools and equipments.
47welder:- ITEM CODE :-304004078 Supply of welder including welding rods, gas, etc complete
48Man hole:- ITEM CODE :-304004079 Construction of brick masonry inspection chamber/manhole with full bricks, in CM 1:5, provided with a light duty CI covers conforming to IS: 1726 neatly finished including 12mm thick plastering on both faces in CM 1:6, rounding, finishing, excavation, pccbedding benching with neat cement finish etc., all complete as per specifications . a) Internal size 600 x 600 x 600mm deep
49FLUSH TANK:- ITEM CODE :-304004080 Supply and fixing of syphon and standard FLUSH TANKincluding cost and conveyance of all materials labour chargesINCLUDING all Materials ertc complete etcMAKE HINDUWARE/parry ware/cera
50E.W.C:- ITEM CODE :-304004083 Providing and fixing white glazed/COLOURCERAMIC EWC WITH FLUSH TANK water closet (EWC) of superior quality 40cm high HINDUSTAN OR approved equivalent make with ISI - mark, double trap syphonec pattern,\"P\" or \"S\" trap, with cistern with cover HSW No. 21004 or equivalent approved make with ISI-mark having 10 litres capacity with ceramic syphon and valveless fittings (HSW or equivalent make), white colour solid plastic seat cover & lid of superior approved quality, CP brass bar hinges, screws, bolts, rubber, buffers 15mm dia CP inlet water pipe connection and concealed CP brass stop cock; fixing EWC to floor with necessary TW block & brass screws, all complete as per directions of the Engineer. Make: Parry ware/hindu ware/cera
51CI cover:- ITEM CODE :-304004084 Supply and fixing of man hole CI cover at standard sizes includuing labour charges etc complete Size-600X600MM
52I.W.C:- ITEM CODE :-304004086 Providing and fixing vitreous China white glazed Indian type water closet of superior quality 580mmX480MM size Orissa pan(PARRYWARE make, model-Orissa 580 with ISI-mark) with \"P\" or \"S\" trap, vent hole, with low level PVC cistern of 10 liters capacity of \"PARRYWARE make”, syphon & standard flush fittings, CP connecting flush pipe, 15mm CP bras concealed stop cock deluxe type, 15mm dia flexible PVC inlet water connection, all fittings Complete including all materials etc complete. Make ;Parry ware/hindu ware/cera
53Floor mounted coupled type water closet (EWC) :- ITEM CODE :-304004087 Providing and fixing white glazed vitreous china “Floor mounted coupled type water closet (EWC-Parryware make, model-Niagara) of superior quality with ISI-mark, double trap symphonicpattern ,\"P\" or \"S\" trap, Dual Flush system, with cistern capacity as per manufacturer, lid, Anti-microbial seat cover, fittings, closet etc. ,CP brass bar hinges, screws, bolts, rubber, buffers 15mm dia CP inlet water pipe connection and concealed push type jaguar make CP brass stop cock; fixing EWC to floor with necessary TW block & brass screws, all complete as per directions of the Engineer. Make:parry ware/hindu ware//cera
54Bibcock cum Health Faucet:- ITEM CODE :-304004088 Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaguar Continental series, Chrome Finish for complete finish item of work.
55OVAL Under CounterWash Basin:- ITEM CODE :-304004089 Supply, fitting and fixing glazed vitreous china OVAL Under CounterWash Basin of superior quality of size 550 X 400 mm (Parryware make with ISI mark) having single or double holes with 32 mm CP brass waste fittings, 32 mm CP brass bottle trap, 15 mm PVC inlet water pipe connection, painted CI brackets with chain and rubber plug etc. CP jaguar make push type pillar tap, CP stop cock,(Prismatic sink cock of jaquar make) , including all necessary fittings etc complete Make:parry ware/cera/hinduware
56Urinal:- ITEM CODE :-304004090 Providing and fixing white glazed vitreous china Urinal, front lipped of superior quality PARRYWARE make-Model-Niagara with ISI-mark, Z-bracket fixing, Built-in ceramic spreader & waste coupling, push type CP flush valve, CP grating etc., cp push type jaguar make stopcocks, Concealed outlet and installation, and Necessary Fittings etc all as per directions of the Engineer(portions excluded): Make:Parry ware/hindu ware//cera
57Half-round chanel:- ITEM CODE :-304004091 Providing box type half-round white glazed channels 100mm size with dead and outlet ends of approved make, set in cement mortar 1:3 and joints finished with white cement. make-Hind ware
58550mmx450mm Mirror:- ITEM CODE :-304004092 Providing and fixing of 5.5 mm thick polished plate glass mirror of atul/saint gobins/Modi guard with 6mm thick asbestos sheet packing including fixing to wall by means of rawl plugs, etc Size:550mmx450mm
59soap tray:- ITEM CODE :-304004095 Providing and fixing vitreous china white glazed soap tray of superior quality HSW No. 40.010 or approved equivalent Make:hinduware/parry ware/cera
60WASH BASIN :- ITEM CODE :-304004096 Supplying,fitting and fixing white glazed vitreous china wash basin of superior qauality of size 550 x 400mm (HINDWARE make with ISI mark) having single or double holes with 3mm CP brass waste fittings, 32mm Cp brass bottle trap, 15mm PVC inlet water pipe connection, painted C I brackets with chain and rubber plug etc., Jaguar Make ppiller tap, Jaguar make cp stop cock, including all necessary fittings etc complete. MAKE :HINDUWARE/parry ware/cera
61URINAL BRACKETS:- ITEM CODE :-304004097 Supply and fixing of URINAL BRACKETS including labour charges etc complete
62wash basin brackets:- ITEM CODE :-304004098 Supply and fixing of wash basin brackets including remove and refixing of wash basin labour charges transportation etc complete
63soak-pit:- ITEM CODE :-304004099 Construction of soak-pit of size 1500mm dia and 2500mm depth conforming to IS:2470 (Part-I) and as per directions of the Engineer, including all materials, labour, excavation, backfilling, brick bats, bamboo mat, and other bye-works, complete
64CUTTING &FILLING OF THE ROADS:- ITEM CODE :-304004102 Cutting of Roads by 600 mm wide and required depth for laying pipe line and filling the same with150mmdepthPCC(1:5:10)& 150mmDepthPCC (1:2:4) including cost of all materials labour charges ,curing etc complete
65110 mm Dia P.V.C PIPE:- ITEM CODE :-304004103 Providing 110 mm Dia P.V.C. down water take pipes 2.5mm thick 4 Kg/cm2 ISI marked, including cost of necessary P.V.C. Bends, shoes, iron clamps and all other accessories and fixing in position including cost and conveyance of all materials to site, sales and other taxes, operational, incidental etc., including lift charges and labour charges for fixing at site etc., complete for finished item of work in all floors (APSS No.1328) including clamps etc complete MAKE;PRINCE/SUDHAKAR
66GULLY TRAP:- ITEM CODE :-304004105 Providing SW yard gulley trap 150 x 100mm with CI grating 150 x 150mm and water-tight light weight CI covers conforming to IS: 1726 of size 300 x 300mm including half-brick masonry in CM (1:4) plastered neatly with CM (1:4) on both faces, 100mm thick PCC bed of mark M-10C, necessary excavation, complete as per direction of the Engineer.
67ONLY FIXING OF URINAL:- ITEM CODE :-304004107 including labour charges ,small materials etc complete
68URINAL WASTE COUPLING:- ITEM CODE :-304004108 SUPPLY AND FIXING OF URINAL WASTE COUPLINGINCLUDING LABOUR CHARGES ETC COMPLETE
69WASH BASIN WASTE COUPLING:- ITEM CODE :-304004109 SUPPLY AND FIXING OF WASH BASIN WASTE COUPLINGINCLUDING LABOUR CHARGES ETC COMPLETE
70LABAROTARY SINK:- ITEM CODE :-304004113 Supply and fixing laboratry sink including clamps ,Jaguar make long body bib tap-1no, drain pipe ,Jaguar Make stop cock -1no,including waste coupling with waste pipeetc
71TOILET PAPER ROLL HOLDER:- ITEM CODE :-304004116 Providing and fixing recessed toilet paper roll holder including roller white glazed vitreous china, HSW No. 40.025 or approved equivalent make. Make:Jaguar/parryware
72NAHANI TRAP:- ITEM CODE :-304004117 Providing and fixing 100 x 75mm HSI floor/Nahani trap with CP hinged heavy brass grating to be fixed in PCC M15C and made water tight.MAKE:INDO/NICCO/BIF
73100MM DIA HCI SOIL PIPE:- ITEM CODE :-304004118 Providing, fitting and laying 100mm dia meter HCI soil and waste pipe including vent pipe with all required HCI specials, plugs , clamps etc., of approved make including lead caulked joints 25mm deep, anticorrosive paint inside and both sides for furried pipe,all complete as per specification and direction of engineer MAKE:INDO/NICCO/BIF
7475MMDIA HCI SOIL PIPE:- ITEM CODE :-304004119 Providing ,fitting and laying H.C.I soil and waste pipe including vent pipe with all required H.C.I specials,plugs,clamps,etc of approved make, including lead caulked joints 25mmdeep, anti coorrosive paint, inside and both sides for furried pipe, all complete as per specification and direction of engineer. MAKE:INDO/NICCO/BIF
75STONE WARE SALT GLAZED PIPE(150MMDIA):- ITEM CODE :-304004120 Providing, laying, and jointing stone ware salt glazed pipe in CM1:2 including embedding in pcc mark M-10c, necessary excavation,&back filling complecte as per specifications and depth up to 1.5Mmake: indo/ kandelwal/pallavi
76S.W.G PIPE (100MMDIA) :- ITEM CODE :-304004121 Providing ,laying and jointing S.W.G Pipe in cm1:2 including embedding in pcc mark M-10c necessary excavation& back filling complete as per specification and depth up to 1.5mMAKE indo/ kandelwal/pallavi
77S.W.G PIPE (200MMDIA) :- ITEM CODE :-304004122 Providing ,laying and jointing S.W.G Pipe in cm1:2 including embedding in pcc mark M-10c necessary excavation& back filling complete as per specification and depth up to 1.5mMAKE indo/ kandelwal/pallavi
78SINTEXTANK:- ITEM CODE :-304004123 Providing and fixing of polyethylene 3layers water storage sintextank in required capacities cylindrical with top closed top SINTEX with necessary scours and over flow Gi pipes ,GI INLET AND OUT LET CONNECTIONS , FLOAT VALVE , all of size 25mm hoisting ,fixing , testing , including foundation and necessary material etc MAKE-SINTEX
794MM THICK ACARLYIC SHEET:- ITEM CODE :-304004132 supply and fixing of4mm Thick Acarlyic SheeT including nut& bolts labour charges etc complete
805MM THICK ACARLIC SHEET:- ITEM CODE :-304004133 supply and fixing of 5mm Thick Acarlic Sheet including labour charges , nut and bolts etc complete
81EWC SHEET COVER:- ITEM CODE :-304004134 Supply and fixing of EWC Sheet cover Hindu ware make including cost and conveyance of labour charges transportation etc complete
82BRUSH BOND:- ITEM CODE :-304004135 Supply &laying ofbrush bond forsorac make including two coats of brush bond labour charges scaffolding etc
83PUSH TYPE PILLER COCK (JAGUAR CONTINENTA:- ITEM CODE :-304004138 Supply & Fixing of push type piller cock (Jaguar continental series) of standard design and of approved make confirming to ISI.
84URINAL PUSH TYPE COCK (JAGUAR CONTINENTA:- ITEM CODE :-304004139 Supply & Fixing of urinal push type cock (Jaguar continental series) of standard design and of approved make confirming to ISI.
85PREPRINT GALVANIZED 0.5MM SHEET:- ITEM CODE :-304004141 Supply and fixing of Preprint galvanized sheet 0.5mm thick including necessary fittings,hard ware fittings including over laps, etc payment will be released as per sqm bases
86GLASS PUTTY:- ITEM CODE :-304004143 Supply and fixing of glass putty including labour charges transportation etc complete
875.0MM THICK PLAIN GLASS:- ITEM CODE :-304004147 Supply and fixing of 5.5 mm thick plain glass(Atual/modi/SAINT GOBIN)) including puttycost and conveyance of all materials labour charges etc
88CONTINUOUS HINGES:- ITEM CODE :-304004150 Supply and fixing of continuous hinges width of flaps 30mm (when open )mild steel bright finish or electro galvanized complete all as directed by engineer in charge.MAKE-EBCO
89ALUMINUM DOOR 6LEVERLOCK GODREJ/DOOR SET MAKE:- ITEM CODE :-304004152 Supply and fixing of aluminum door 6leverlock godrej/DOOR SET make including all materials etc
90DOUBLE GRIP DOOR STOPPER:- ITEM CODE :-304004153 Supply and fixing of double grip door stopper including all materials etc Make:Godrej/dor set
91CUP BOARDS POWER COATED MAGNETS:- ITEM CODE :-304004154 Supply and fixing of cup boards power coated magnets including hard ware fittings etc complete. Make:Godrej
92POWDER COATED ALUMINIUMWINDOW HANDLES:- ITEM CODE :-304004157 Supply and fixing ofpower coated aluminuim window handles including cost and conveyance of all materials labour charges etc
93ALUMINIUM BEADING:- ITEM CODE :-304004159 Supply and fixing of aluminium beading of any size including cost and conveyance of all materials labour charges etc.Make:Jindal
94MANUAL SLIDING DOOR CHANEL:- ITEM CODE :-304004160 Supply and fixing of Heavy dutymanual sliding door fitting set including cost and conveyance of all materials labour charges etc.Make:Godrej
95DOOR CLOSERS EXPOSED TYPE:- ITEM CODE :-304004162 supply and fixing of heavy duty hydraulic automatic door closers(60kgs) Godrej/door set (Expose type) approved make cost and conveyance of all types of materils labour charges etc
96GYPSUM BOARD FALSE CEILING:- ITEM CODE :-304004164 Providing and fixing in position false ceiling Gypsum board and the followingspecifications.a). Making the frame work with 2 x 25 x 1.5mm thick aluminium/suitableTees and Angles of the size of 2\"x2\" b). Suspension of frame from the roof with 6mm MS Rods at every 1m distance and having adjustable springs for leveling purposes ,with suitable provision for tube light fittings,all complete as per direction of engineerc).placement of 12mm thick gypsum board tiles in the grid and lockingd).Apply of 2coats of colour maching to the room co lour of Emulsion paint to the tile MAKE-INDIAN GYPSUM
97ONLY FIXING POWEWR COATED FALSE CEILING:- ITEM CODE :-304004166 only fixing of power coated false ceiling including levelling and levelling rods and all minor materials transportation labou charges etc complete
98ARMSTRONG MICRO LOOK FALSE CEILING TILES:- ITEM CODE :-304004167 Armstrong Micro look false Ceiling tiles Providing and fixing Armstrong make (Model-Dune Max with Microlook type Edge using 15mm Silhouette XL Microlooktype suspension system) false ceiling of size 24x24 ceiling tiles at levels as shown in the drawing From FFL. Rate shall be inclusive of providing the total system with installation etc. The suspension system should be with adjustable stainless steel clip. The contractor has to maintain all tiles in good order and replace the defected tiles (at his own cost) before handing over the site till Inauguration. Make-Arm strong
99VERTICAL VENATION BLINDS:- ITEM CODE :-304004173 Supplying and Fixing ofvertical Venetian blinds 100 mm wide Vista/MAK make with all accessories including cost and conveyance of all materials and fixing charges etc., complete for finished item of work.at all heights.
100SOLID CORE FLUSH DOOR LAMINATED ON BOTH: ITEM CODE :-304004179Solid core flush door laminated on both sides Providing and fixing 35mm thkSolid core BWP (Boiling water proof) gradeof Greenply Optima Red or equivalent approved make , made out of specifically selected & well-seasoned hardwood timber. The solid Block Board coreto be framed with seasoned hardwood battens and strengthened by a layer of cross-bands with face veneer on both side of the core. The flush doors shall conform to IS-2202 (part I). The flush door shall have 12mm TW lipping all around, polished finish at edge, color to matchdoor laminate. Both faces of the door shall be finished with 1mm thk laminate (Factory pressed) of sun mica, formica, greenlam, color as approved by architect/owner, and provide 6mm thk glazingview panel of size 8x2 above the handle. with all necessary hardware are of Godrej make. Hinges (4 nos) of size 100x75x3 with SS304 satin finish (Model no- SS304), 6 lever godrej Heavy duty lock (Model no 1938) with brass chorme finish, Euro profile indus handle set (2 nos) of SS304 satin finish (Model no 9225),Heavy duty door closer, Tower bolts (1 nos) with SS304 satin finish (Model no-8577) , Door stoppers (1 nos) satin finish (Model no 8830) etc.as required . complete Manufacturer of Solid flush door
101GODREJ NAVATAL 7LEVERS LOCK: ITEM CODE :-304004181 Supply of Godrej Navatal 7 levers with 3 keys including cost and conveyance, etc.
102DECOLUM SHEET FOR ISI MARK: ITEM CODE :-304004183 Supply and fixing of Green lam decolum sheet 1mm thick ISI Mark including all materials ,fevical labour charges etc complete.
10319MM THICK KIT PLAY WATER PROOF PLY WOOD: ITEM CODE :-304004184 Supply and fixing of1 9mm thick kit play water proof ply wood ISI Mark including all materials ,fevical labour charges etc complete. Make:Green Play
104TW DOOR FRAME: ITEM CODE :-304004188 Providing& fixing ofwood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position made out of First class teak wood –indian teak wood including hold fasts ,transportation labor charges, filling gaps, dents etc. with appropriate wooden putty, with bitumen paint on the surface contact with brick works/concrete. etc complete
105MS door frame with powder coating: ITEM CODE :-304004189 Supplying and fabricating and fixing in position, pressed MS frames (Factory made and finished) for door and windows manufactured from commercial steel sheet 1.2mm thick including provision of hinges, lock jams, beads, brace ties with 4.00mm pressed mild steel welded adjustable lugs with split tail end, mortar guards, lick strike plate, shock absorbers, etc. and powder coatingof approved shade. The hollowssection of the 187doors should be filled with concrete of grade 1:2:4 using 6 mm down size aggregateFrames have to be duly protected
106Wooden beading : ITEM CODE :-304004190 Providing and fixing of 35mm x 12mm Teak wood beading (contractor has to provide samples for approval by Architect/Owner) to be fixed at door frame and masonry junction including painting to match door frame.
107BITUMEN PREMIX CARPET OF 25 MM THICK: ITEM CODE :-304004196 Applying evenly a priming/ tack coat with bituminous primer using paving bitumen 5kg per 10 sqm and laying bituminous premixed carpet, 25mm consolidated thickness with 0.3 cum of stone chippings 6mm to 12.5mm size mixed with 96kg bitumen per cum of chipping by hot mix process laid by mechanical paver and rolled and compacted to required camber and gradient using 8 to 10 ton power roller to a uniform smooth surfaces complete all as specified and directed by Engineers in charge.
108Removing of tar felt sheet : ITEM CODE :-304004198 Scraping and removing the existing tar felt sheet from the roof and disposing unserviceable material with a lead of 2kms to an authorized municipal dumping area
109MAKING OPENING FOR EXHAUST FANS(500MMDIA) :- ITEM CODE :-304004216 Making openings in walls etc . at all heights above floor level forfixing exhaust fans of size 500mmdia , providing and embedding wooden plugsas required for exhaust fans ,making good the damage done to adjoining areas ,including finishing with disposingthe debries with in alead of 500m etc
110MAKING OPENING FOR EXHAUST FANS (750MM) :- ITEM CODE :-304004217 Making openings in walls etc . at all heights above floor level forfixing exhaust fans of size 750mmdia , providing and embedding wooden plugsas required for exhaust fans ,making good the damage done to adjoining areas ,including finishing with cement plaster to match with the existing surfaces scaffolding,curing disposingthe debries with in alead of 500m etc
111NAHANI CONNECTION (WASTE PIPE) :- ITEM CODE :-304004220 Providing and fixing of nahani connection (waste pipe) including cost and conveyance of all materials labour charges removing of old fittings etc
112REMOVING OF ALU PARTITION:- ITEM CODE :-304004221 Removing carefully the existing aluminuim partition with out making any damage to glass panels by making necessary opening screws in the walls etc transporting and stacking the partition materials asdirected by the engineer -in -charge including labour charges etc
113ONLY FIXING OF ALU PARTATION:- ITEM CODE :-304004222ONLY FIXING OF ALUNINUIM PARTATION INCUDING LABOUR CHARGES TRANSPORTATION ,screws, and minor materials ETC COMPLETE
114POWER COATED ALU PARTATION :- ITEM CODE :-3040043223 Supply and fixing of aluminium partition as per drawing with standard POWER COATED aluminiumsections 101.60 x 44.45 x 2.00 mm in four rows of section one each at bottom and top and middle two numbers of horizontal sections and vertical number at 90.00 cm centre to centre equal distance and shall be firmly secured to floor and walls and panels of 12mm thick both side pre laminated particle board (Novapan) make and 5mm thick sheet glass colour glass-MODI/ATUL as per drawing, panels fixed with aluminium glazed clips and rubber gasket, including provision of doors as per drawing of standard aluminium anodized sections 3 horizontal and two verticals and 12mm thick pre laminated board upto lick rail, remaining portion fixed with 5mm Thick Sheet Glass and shall be provided with floor mounted door springs (Everite make) 2 nos. of tower bolts of 250mm long, door stoppers, push and pull plates, locking system, including sliding door materials etc. complete .Aluminuim material-Jindal make
115POWER COATED ALU DOOR:- ITEM CODE :-304004224 Supply and fixing fully glazed POWER COATEDaluminiumhinged type Door Jindal makeas per approved drawings using standard aluminium outer frame section of size 101.6 x 44.75 x 1.35mm thick (1.05 Kg per Rmt ) and shutters styles section of size 85 x 44.5 x 1.8mm thick (1.302 Kg per Rmt ), bottom rail section of size 150 x 44.45 x 2.2mm thick (2.376 Kg per Rmt) and top, lock rails section of size 85 x 44.5 x 1.8mm thick (1.302 Kg per Rmt) using 5mm thick tinted glass/ plain glass/colour glassand shall be provided with floor mounted door springs (1 No. per each shutter), hydraulic automatic door closers exposed type ( 1 No. per each shutter)including all fittings such as handles,push and pull plates,fitted with suitable alluminium glazing clippsand rubber beading,including sun control film of door shutters and all hardware fittings,like butt hinges,tower bolts, door stoppers etc., alluminium clips,6 lever lock,bolts,rubber gaskets.etc., as per specifications,and directions of Engineer.The measurement for payments shall be for the full opening including frames. (Aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by Engineer and fixitures shall be of ISI marked) HARD WARE-DOOR SET/godrej
116ANODISED ALUMINUIM SECTIONS:- ITEM CODE :-304004226 SUPPLY AND FIXING OFANODISED ALUMINUIM AT Any SECTIONS INCLUDING TRANSPORTATION LABOUR CHARGES ETC COMPLETE Make;Jindal
117RUBBER BEADING:- ITEM CODE :-304004227 SUPPLY AND FIXING OF RUBBER BEADING INCLUDING LABOUR TRANSPORTATION ETC COMPLETE
11812MM THICK NOVAPAN(BOTH SIDE LAMINATION) :- ITEM CODE :-304004231 Supply and Fixing of 12MM THICK NOVAPAN(BOTH SIDE LAMINATION) including all materials etc complete
119ALUMINUIM WINDOWS:- ITEM CODE :-304004232 Providing and fixing in position extruded modular (Heady duty aluminum 2mm thick with powder coating of approved colorin Jindal/Hindal sections) aluminum window system consisting of fixed and sliding/open able shutters as designed andapproved by the architect including 6 mm thick toughened tinted glass, sliding window rollers, handles, locking system as per direction of aluminum open able/sliding sections etc complete
120POWER COATED ALU SLIDING WINDOW:- ITEM CODE :-304004233 DOMAL SLIDING WINDOWS ON THREE TRACKSECTIONS WITH S.S MESH: Providing and fixing 40microns pure polyester coated aluminum Domal aluminum sliding windows using three track section Agarvanshi Alluminium Ltd.or equivalent Sections No: 3127 of dimension 126 X 36.5 X 1.6mm thick, shutter sections of Section No: 3122 of dimension 27X 65 X 1.5 mm thick, inter lock strip of section No: 3119 and forfixed using Jindal section No: 2431, with two shutters of 5.5 mmthick toughened tinted glass one shutter with S.S Mesh fromoutside for the cover the whole window, EPDM gaskets, locking arrangements including all quality accessories and installation atsite. The Rate is including cost and conveyance of all materials,labour charges and all operational, incidental charges etc.,complete for finished item of work
121ALUMINUIM PARTITION(101.60X44.45X2.00) :- ITEM CODE :-304004234 Supply and fixing of aluminium partition as per drawing with standard aluminium anodized sections 101.60 x 44.45 x 2.00 mm in four rows of section one each at bottom and top and middle two numbers of horizontal sections and vertical number at 90.00 cm centre to centre equal distance and shall be firmly secured to floor and walls and panels of 12mm thick both side pre laminated particle board (Novapan) make and 5mm thick sheet glass ROUGH GLASS/colour glass-MODI/ATUL as per drawing, panels fixed with aluminium glazed clips and rubber gasket, including provision of doors as per drawing of standard aluminium anodized sections 3 horizontal and two verticals and 12mm thick pre laminated board upto lick rail, remaining portion fixed with 5mm Thick Sheet Glass and shall be provided with floor mounted door springs (Everite make) 2 nos. of tower bolts of 250mm long, door stoppers, push and pull plates, locking system, including sliding door materials etc. complete.Aluminuim material-Jindal make
122ALUMINUIM VENTILATORS:- ITEM CODE :-304004235 Supply and fixing fully glazed aluminium anodized hinged type Ventilatorsjindal make as per approved drawings using standard aluminium outer frame section of size 40 x 31.5 x 1.2mm thick (0.549 Kg per Mtr) and central mullion of size 40 x 31.5 x 00 mm ( 0.502 Kg per Mtr) and shutters styles made of anodized aluminium section 40 x 31.5 x 1.2mm thick and rails section of size 40 x 31.5 x 1.2mm thick using 4mm thick plain glass fitted with suitable aluminium glazing clips and rubber beading including supplying and fixing butt hinges (2 Nos. per shutter), handles(1 No per shutter) including aluminium anodized grill, including cost and conveyance to site of Aluminium sections glass, rubber beading, fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws etc, complete for finished item of work, (Aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by Engineer and fixitures shall be of ISI marked) HARD WARE MAKES-DOOR SET
123GYPSUM BOARD PARTATION:- ITEM CODE :-304004236 FULL HEIGHT PARTITION WITH SINGLELAYER OFMOISTURE RESISTANT GYPSUM BOARD ON BOTH SIDES (Height from FFL to soffit of Structural Ceiling) - (India Gypsum make only) Providing and & fixing in place partitions of overall thickness of 100 mm, formed out of the following components A)Framework:Providing and fixing framework made of special section power pressed from M.S.sheet and galvanized with zinc coating of grade 175 (specification of GI), consisting of floor and ceiling channel 75mm wide (U-Floor channel) having equal flanges of 32mm width 0.50mm thick fixed to floor /ceiling at the spacing of 610mm center to center with dash fastenerof 12.5mm diameter 40mm length and studs 72mm wide having one flange of 34mm and other flange 36mm and 0.50mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm c/c by 6mm dia. bolts and nuts at both ends of partitions fixed flush to wall with rawl plugs at the spacing of 450mm c/c. (Note : Horizontal intermediates are required at 1.2 m interval in case the height of frame work exceeds 3m to strengthen vertical studs. The items also to include for additional horizontal/vertical supports where door/window openings.B)Cladding The framework to be cladded on both sides withSINGLE layers of 12.5 mm thick tapered edgeMoisture resistant Gypsum board of India gypsum makewith 0.5hr fire resistance, in line and level fixed with dry wall screws of 25 mmand finished with proprietary jointing tape and compound as per manufacturer\"s specification. Joints to be sand papered to achieve a smooth and seamless finish. C)Finishes Two coats of gypboard primer to be applied to finished surfaces and then smoothened using chalk putty as directed. Special Provisions a)Contractor to make provision for all electrical/networking boxes as required. Electrical/Network boxes /other services to be provided at desired height and location as indicated in the drawing.b)All exposed edges / corners/ groovesto haveproprietarycorner / edgebead sections/channelsas per Architect\"s instructions At all locations where services are penetrating the partition above c)false ceiling to have additional GI frame work around the duct/cable tray/pipe and the gaps between the frame work and service to be filled with appropriate fire stop material as directed d) Provide 6mm ply backing of 80mm high for fixing vitrified tile skirtingMake:Indian Gypsum
124GRANITE BASIN COUNTER TOP:- ITEM CODE :-3040043238 Providing &fixing 20mm thick polished Granite slabs of approvedshade at wash basin counter, including cutting, rounding of the edges, providing 75 mm high apron with half round moulding, finishing, other necessary bye-works all complete as per direction of the engineer .The granite slab shall be of single piece. (Granite Rate Range: 1750 to 2000 Rs/Sqm) Note: ARCI staff will choose the Granite
125ONLY FIXING OF URINAL:- ITEM CODE :-304004239 ONLY FIXING OF URINAL INCLUDING LABOUR ,MINOR MATERIALS(SSMade) ETC COMPLETE
126PRECOATED GALVANISED IRON PROFILE SHEETS:- ITEM CODE :-304004243 Providing and fixing precoated galvanised iron profile sheets at a height of 3m to 12mts including scaffolding,Ridges plain(500-600mm) (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thicknesswith zinc coating 120 grams per sqm as per IS: 277, in 240 mpasteel grade, 5-7 microns epoxy primer on both side of the sheetand polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single lengthupto 12 metre or as desired by Engineerin- charge. The sheetshall be fixed using self drilling /self tapping screws of size (5.5x55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.The Rate is including cost and conveyance of allmaterials, labour charges and all operational, incidental chargesetc., complete for finished item of work.
127REMOVING OF PVC FLOORING:- ITEM CODE :-304004244 Only removing of PVC flooring including labour charges transportation etc complete
128POWER COATED/SS HINGES:- ITEM CODE :-304004245 Supply and fixing ofPower coated/SS hinges including removing of old hinges transportation screws etc complete(Size4’’or 6’’) Make :godrej/door set
129REPAIRING OF ALL TYPES OF FALSE CEILING:- ITEM CODE :-304004246 Repairing of all types of false ceiling, adjustment of supports, screws, channels, including major and minor repairs for normal position of false ceiling, necessary minor materials, cost and conveyance of all materials labour charges etc
130SUNCONTROLFILM:- ITEM CODE :-304004248 Supply and fixing of sun control filmof non- reflicted type of approved colour make(garware) 0r equivalent including cost and conveyance of amaterials, labour charges etc
131ALUMINUIM WINDOW HANDLE:- ITEM CODE :-304004253 Supply and fixing of aluminuim window handles including cost and conveyance of all materials labour charges etc(.301005046
132SUPPLY AND MAKING / FIXING OF TEAK WOOD:- ITEM CODE :-304004255 SUPPLY AND MAKING / FIXING OF TEAK WOOD including labour charges, screws , nuts & bolts, minor materials etc complete
133SUPPLY AND MAKING / FIXING OF HARD WOOD:- ITEM CODE :-304004256 SUPPLY AND MAKING / FIXING OF HARD WOODincluding labour charges, screws, nuts and minor materials etc
134ALUMINUIM WINDOWS:- ITEM CODE :-304004263 Supply and fixing fully glazed aluminium anodized hinged type window as per approved drawings using standard aluminium outer frame section of size 40 x 31.5 x 1.2mm thick (0.549 Kg per Mtr) and central mullion of size 40 x 31.5 x 00 mm ( 0.502 Kg per Mtr) and shutters styles made of anodized aluminium section 40 x 31.5 x 1.2mm thick and rails section of size 40 x 31.5 x 1.2mm thick using 4mm thick plain glass fitted with suitable aluminium glazing clips and rubber beading including supplying and fixing butt hinges (2 Nos. per shutter), handles(1 No per shutter) including aluminium anodized grill, including cost and conveyance to site of Aluminium sections glass, rubber beading, fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws etc, complete for finished item of work including sun control film, (Aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by Engineer and fixitures shall be of ISI marked ) Make:Aparna/Tata/Jindal
135ALUMINUIM DOOR:- ITEM CODE :-304004266 Supply and fixing fully glazed aluminium anodized hinged type Door as per approved drawings using standard aluminium outer frame section of size 101.6 x 44.75 x 1.35mm thick (1.05 Kg per Rmt ) and shutters styles section of size 85 x 44.5 x 1.8mm thick (1.302 Kg per Rmt), bottom rail section of size 150 x 44.45 x 2.2mm thick (2.376 Kg per Rmt) and top, lock rails section of size 85 x 44.5 x 1.8mm thick (1.302 Kg per Rmt) using 5mm thick tinted glass/ plain glass/colour glassand shall be provided with floor mounted door springs (1 No. per each shutter), hydraulic automatic door closers exposed type(1 No. per each shutter)including all fittings such as handles,push and pull plates,fitted with suitable alluminium glazing clippsand rubber beading,including sun control film of door shutters and all hardware fittings,like butt hinges,tower bolts, door stoppers etc., alluminium clips,6 lever lock,bolts,rubber gaskets.etc., as per specifications,and directions of Engineer.The measurement for payments shall be for the full opening including frames. (Aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by Engineer and fixitures shall be of ISI marked HARD WARE-DOOR SET/godrej
136MINOR REPAIR OF ALUMINUM DOOR:- ITEM CODE :-304004270 Minor Repairing of of all types of aluminium doors, adjustment of all types of door fittings, including minor repairs for normal functioning of aluminium shutters including necessary minor materials(SS Made) cost and conveyance of all materials labour charges etc
137MAJOR REPAIR OF ALU/WINDOWS/VENTILATORS:- ITEM CODE :-304004271 Major repairs of all types of aluminium windows/ventilators, adjustment of all types of windows fittings including majorrepairs for normal functioning windows including necessary major materials (ss made) cost and conveyance of all materials labour charges etc.
138FRICTION HINGES:- ITEM CODE :-304004273 Supply and fixing of aluminuim window friction hinges heavy duty(SSMade) including cost &conveyance of all materialslabour charges etc MAKE: EBCO/DOOR SET
139DOUBLE ACTION FLOOR SPRINGS:- ITEM CODE :-304004274 Supply and fixing of Heavy duty double action floor springs including cost and conveyance of allmaterials labour charges etc.MAKE: EVERITE/DOOR SET/GODREJ
140SINGLE ACTION FLOOR SPRING: ITEM CODE :-304004275: Supply and fixing of heavy dutysingle action floor springs including cost and conveyance of all materials labour charges etc. MAKE: EVERITE/DOOR SET/GODREJ
14120 MM GRANITE PARTITIONS: ITEM CODE :-304004276 Supplying and fixing of 20 mm Granite partitions of size 4 x 2 for urinals including rounding edges, threesides, fixing ,polishing ,etc. complete for finished item of work
142CP BRASS CONCEALED STOPCOCK (JAGUAR CONT): ITEM CODE :-304004277 Supply & Fixing of CP brass Concealed stopcock (Jaguar continental series) of standard design and of approved make confirming to ISI
143CP BRASS ANGLE STOPCOCK (JAGUAR CONTINEN): ITEM CODE :-304004278 Supply & Fixing of CP brass Angle stopcock (Jaguar continental series) of standard design and of approved make confirming to ISI
14420MM DIA BALL VALVE /BUTTER FLY VALVE: ITEM CODE :-304004279 Supplying, fitting and fixing superior quality 20mm dia Ball valve /butter fly valve (full way) of \"LEADER\"/ hudco/ZOLOTO make or equivalent with ISI-mark 20MM DIA BALL VALVE /BUTTER FLY VALVE
14525MM DIA BALL VALVE /BUTTER FLY VALVE: ITEM CODE :-304004280 Supplying, fitting and fixing superior quality 25mm dia Ball valve /butter fly valve (full way) of /ZOLOTO make or equivalent with ISI-mark
1461MM THICK GI SHEET: ITEM CODE :-304004281 Supply and fixing of 1mm thick GI sheet including labiur charges , nails , etc
147REFIXING OF ALUMINUIM PARTATION: ITEM CODE :-304004282 Only refixing of Aluminuim partation including labour charges ,tools &tackles etc
148CRACK FILLING: ITEM CODE :-304004284Providingtwo coatsof crack filling including labour charges ,scafolding charges including making of groovesetc
149HAND RAIL POLISH WORK: ITEM CODE :-304004285 POLISHING to Handrail with two coats of French polish of 1st grade and approved brand and shade over a primary coat (total 3 coats) including cost and conveyance of all materials to site, cost of primer coat, brushes, SAND PAPERSand all labour charges etc. complete (APSS No.1201, 1207 & 1212)
150HYPER PLAS 3KG/SQM WITH PAINTING: ITEM CODE :-304004287 Supply and providing water proofing treatment withHyperplas (IWL Make)app memberance of weight not less than 3kg/sqm with 90micron high molecular high density polyethylene film sand witched between two layers of polymeric (atactic poly propylene based) bitumen laminated on both side with 20microns HDC HPDH film over a coat of hot blown bitumen 85/25 grade @1.2kg/sqm after priming t the surface with abituminous emulsional (talk coat)@100gs per sqm /10cmover laps of the membrane stall be fused uniformly by LPG torch flame and two coat of aluminum paint after polymer membrane all the specified and directed.
151REMOVING OF EXISTING BITUMEN FELT: ITEM CODE :-304004288 Removing of existing bitumen felt and pcc 1.2 4 for hunching areas & the surface shall be thoroughly cleaning, washing down with wateretc including disposal of removed materials up to 2km lead etc complete
152C.P. PILLAR TAP: ITEM CODE :-304004289 Providing and fitting C.P. pillar tap of jaguarmake of superior quality with ISI mark including cost and conveyance of all materials labour charges removing of old fittings etc.
15315MM DIA METER C.P.Long Body BIBCOCK: ITEM CODE :-304004290 Providing and fixing of 15mm dia meter c.p. Long body bibcock Jaguar make of superior quality with ISI mark including cost and conveyance of all materials labour charges removing of old fittings etc
15415MM DIA METER C.P. stop cock/ANGLE COCK: ITEM CODE :-304004291 Providing and fixing of 15mm dia meter c.p.stopcock /Angle cock Jaguar make of superior quality with ISI mark including cost and conveyance of all materials labour charges removing of old fittings etc.
155C.P. BIB TAP(Short body): ITEM CODE :-304004292 Providing and fixing of long body c.p.bib tap (Short body) Jaguarmake of superior quality with ISI mark including cost and conveyance of all materials labour charges removing of old fittings etc.
156POWDER COATED 150MM DIA TOWEL RING: ITEM CODE :-304004293 Providing and fixing powder coated 150mm dia meter towel ring of superior quality with ISI mark including cost and conveyance of all materials labour charges removing of old fittings etc. Make:Jaguar
15715MM PVC INLET WATER PIPE: ITEM CODE :-304004297 Supply and fixing of 15mm PVC inlet water pipe/ss materialconnection including cost and conveyance of all materials labour charges removing of old fittings etc
158C.P. GRATINGS: ITEM CODE :-304004299 Supply and fixing of C.P. gratings Heavy duty ss material including cost and conveyance of all materials labour charges removing of old fittings etc
15925MMDIAGIPIPE: ITEM CODE :-304004316 Supplying, fitting and laying 25MM DIAGI pipes of Meduimquality (\"B class) of JINDAL/TATA with all necessary fittings such as bends, tees, elbows, reducers, unions, nipples, plugs, clamps, fixtures, etc., including necessary earthwork, backfilling,etc., complete as per specification (including concealing in walls/floors): A) 25mm nominalbore.
16015MMDIAGIPIPE: ITEM CODE :-304004317 Supplying, fitting and laying 15MM DIAGI pipes of Meduimquality (\"B class) of JINDAL/TATA with all necessary fittings such as bends, tees, elbows, reducers, unions, nipples, plugs, clamps, fixtures, etc., including necessary earthwork, backfilling,etc., complete as per specification (including concealing in walls/floors): A) 15mm nominalbore
16120MMDIAGIPIPE: ITEM CODE :-304004318 Supplying, fitting and laying 15MM DIAGI pipes of Meduimquality (\"B class) of JINDAL/TATA with all necessary fittings such as bends, tees, elbows, reducers, unions, nipples, plugs, clamps, fixtures, etc., including necessary earthwork, backfilling,etc., complete as per specification (including concealing in walls/floors): A) 20mm nominalbore.
16225MM DIA GATE VALVE” ITEM CODE :-304004319 Supply and fixing of 25mm dia meter gate valves of superior quality gun metel gate valves (full way) of leader make or equivalent with ISI mark including cost and conveyance of all materials, removing of old gate valves, and labour charges etc.MAKE-ZOLOTO
16315MM DIA GATE VALVE: ITEM CODE :-304004320 Supply and fixing of 15mm dia meter gate valves of superior quality gun metel gate valves (full way) of leader make or equivalent with ISI mark including cost and conveyance of all materials, removing of old gate valves, and labour charges etc.MAKE-ZOLOTO
16420MM DIA GATE VALVE: ITEM CODE :-304004321 Supply and fixing of 20mm dia meter gate valves of superior quality gun metel gate valves (full way) of leader make or equivalent with ISI mark including cost and conveyance of all materials, removing of old gate valves, and labour charges etc.MAKE-ZOLOTO
165STEEL FRAMES: ITEM CODE :-304004322 Supplying, fabricating and fixing in position, pressed steel frames for doors and windows manufactured from commercial steel sheet 1.2mm thick including provision of hinges, lock jams, beads, brace ties with 4.00mm pressed mild steel welded adjustable lugs with split tail end, mortar guards, lick strike plate, shock absorbers, etc. and painting with two coats of approved synthetic enamel paint over primer coat, and instructions of the Engineer, including provision and filling with PCC m-10c. a) for 126mm profile b) MAKE-DWARAKAOR EQUIVALENT
16665MM DIA PVC WATER PIPE: ITEM CODE :-304004324Supplying, fitting and laying 50 MM DIA PVC WATER PIPE ofHEAVYqualitywith all necessary fittings such as bends, tees, elbows, reducers, unions, nipples, plugs, clamps, fixtures, etc., including necessary earthwork, backfilling,etc., complete as per specification
16720MM DIA CPVC PIPE: ITEM CODE :-304004335 Supplying, fitting and laying 20MM DIA CPVC pipes( class -1/SDR-11 )of of Asharwad make with all necessary fittings such as bends, tees, elbows, reducers, unions, nipples, plugs, clamps, fixtures, etc., including necessary earthwork, backfilling,etc., complete as per specification (including concealing in walls/floors):
16825MM DIA CPVC PIPE: ITEM CODE :-304004336 Supplying, fitting and laying 25MM DIA CPVC pipes ( class -1/SDR-11 ) of of Asharwad make with all necessary fittings such as bends, tees, elbows, reducers, unions, nipples, plugs, clamps, fixtures, etc., including necessary earthwork, backfilling,etc., complete as per specification (including concealing in walls/floors):
16920MM DIA CPVC VALVE: ITEM CODE :-304004343 Supply and fixing of Heavy duty 20mm dia meter CPVC valves Brass fitted of superior qualityof ASHARWADmake or equivalent with ISI mark including cost and conveyance of all materials ETC COMPLETE
17025MM DIA CPVC VALVE: ITEM CODE :-304004345 Supply and fixing of Heavy duty 25mm dia meter CPVC valves Brass fitted of superior qualityof ASHARWADmake or equivalent with ISI mark including cost and conveyance of all materials ETC COMPLETE
171REMOVING AND FIXING OFNEW CERMIC TILES: ITEM CODE :-304004349Removing the existing ceramic tiles and refixing new tiles including cost and conveyance of all materials, labour charges etc.MAKE-JOHNSON/KAJARIA/NITCO
172RE-FIXINGPARTICLE BOARD FALSE CELLING: ITEM CODE :-304004353 Re-fixing of Particle board false ceiling incluing levelling, cost and conveyance of all materials, labour charges etc. (excluding particle board, powder coated false ceiling).
173200MMALUMINUIM HANDLE: ITEM CODE :-304004361 Supply and fixing of 200mm aluminium handles including cost and conveyance of all materials labour charges etc. Make:Godrej/Dor set
174100MMALUMINUIM HANDLE: ITEM CODE :-304004363 Supply and fixing of 100mm aluminium handles including cost and conveyance of all materials labour charges etc. Make:Godrej/Dor set
175BUTT HINGES-3’’size: ITEM CODE :-304004365 Providing and fixing ball bearing Hinges3’’ sizeSS 304 with screws ,labour charges etc complete Make:Godrej/Dor set
176BUTT HINGES-4inch size: ITEM CODE :-304004366 Providing and fixing ball bearing Hinges4inch sizeSS 304 with screws ,labour charges etc complete Make:Godrej/Dor set
177BUTT HINGES-5inch size: ITEM CODE :-304004367 Providing and fixing ball bearing Hinges 6inch sizeSS 304 with screws ,labour charges etc complete Make:Godrej/Dor set
178TOWER BOLTS(150MM): ITEM CODE :-304004371 Providing and fixing with 150mm Tower Bolt SS Heavy duty hardware fitting including screws labour charges etcMake:Godrej/Dor set
179TOWER BOLTS(250MM):ITEM CODE :-304004372 Providing and fixing with 250mm Tower Bolt SS Heavy duty hardware fitting including screws labour charges etc Make:Godrej/Dor set
180300MMALDROPS: ITEM CODE :-304004374 Providing and fixing with SS Heavy duty300mmwith screws including labour charges etc complete Make:Godrej/Dor set
181250MMALDROPS: ITEM CODE :-304004375Providing and fixing with SS Heavy duty300mmwith screws including labour charges etc complete Make:Godrej/Dor set
182MORTICE LATCH75M: ITEM CODE :-304004376 Providing and fixing of Mortice latch 75mmwith grip knobs including all materials etcmake-godrj/door set
183DOOR CLOSER-60KG: ITEM CODE :-304004377Supply and fixing of DOOR CLOSER-60KG including secrews ,labour charges etc complete make-godrej/door set
184MORTISE HANDLE SET 250MM: ITEM CODE :-304004378 Supply and fixing ofMortise Handle set 250mm with Lock body and UERO profile cylinder 60mm both side key SC finish including screws ,labour charges transportation etc complete make-godrej/door set
185PUSH TYPE BIB TAP:- ITEM CODE :-304004383 Supply and fixing of push type Bib tapJAGUAR MAKE including labour transportation removing of existing tap including all materials etc complete
186PUSH TYPE PILLAR TAP: ITEM CODE :-304004384 Supply and fixing of push type Pillar-JAGUARtap including labour transportation removing of existing tap including all materials etc complete
187ALUMINUIM WINDOWS:- ITEM CODE :-304004389 Supply and fixing fully glazed aluminium anodized hinged type window as per approved drawings using standard aluminium outer frame section of size 40 x 31.5 x 1.2mm thick (0.549 Kg per Mtr) and central mullion of size 40 x 31.5 x 00 mm ( 0.502 Kg per Mtr) and shutters styles made of anodized aluminium section 40 x 31.5 x 1.2mm thick and rails section of size 40 x 31.5 x 1.2mm thick using 4mm thick plain glass fitted with suitable aluminium glazing clips and rubber beading including supplying and fixing butt hinges (2 Nos. per shutter), handles(1 No per shutter) including aluminium anodized grill, including cost and conveyance to site of Aluminium sections glass, rubber beading, fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws etc, complete for finished item of work including sun control film, (Aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by Engineer and fixitures shall be of ISI marked ) MAKE:JINDAL/Aparna
188ALUMINUIM WINDOW HANDLE:- ITEM CODE :-304004390 Supply and fixing of aluminuim window handles including cost and conveyance of all materials labour charges etc
18932MM C.P. BRASS WASTE FITTINGS: ITEM CODE :-304004395 Supply and fixing of 32mm C.P. brass waste fittings including cost and conveyance of all materials labour charges removing of old fittings etc
190MAJOR REPAIR OF ALUMINIUM DOORS:- ITEM CODE :-304004396 Major repairing of all types of aluminium doors, adjustment of all types of door fittings, including major repairs for normal functioning of aluminium shutters including necessary minor materials(SS Made) cost and conveyance of all materials labour charges etc
191TOWER BOLTS(300MM):ITEM CODE:-304004398 Providing and fixing with 300mm Tower Bolt SS Heavy duty hardware fitting including screws labour charges etc Make:Godrej/Dor set
192REMOVING OF A.C SHEET, ITEM CODE-304004402 REMOVING OF A.C SHEET INCLUDING SCAFOLDING, LABOUR CHARGES, TANSPORTATION WITH IN A LEAD OF 1K.M, ETC.
1935MM thick COOL /COLOUR GLASS:- ITEM CODE :-304004148Supply and fixing of 5mm thick cool glass including cost and conveyance of all materials labour charges,putty, etc.MAKE- MODI/ATUL/saint gobin
194Granite flooring :- ITEM CODE :-304004058 Providing & laying of approved quality granite leather finish granite stone flooring/mirror polished granite flooring using 18 mm thick as directed by enginner in –incharge for selection of granite, in cement mortar (1:4) and in average thickness of 30mm fixed with cement float ,including grooves etc. complete as directed .The Rate is including cost and conveyance of all materials, labour charges and all operational, incidental charges etc., complete for finished item of work. Base price of stone to be considered at Rs.2000/sq. mt. Granite stone size should be not less than 1500x750mm, UseRiver sand & Ultratech / Ambuja cement,
195Hiring of Tractor:- ITEM CODE :-304004214 Hiring of Tractor 8hours operationincluding labour-4nos with driver-1no etc for shifting of disposal materials from ARCI Inside to out side scrapyard
196HIRING OF TRACTOR FOR TRIP WISEITEM CODE304004409Hiring of Tractortrip wise operationincluding labour with driver etc for shifting of disposal materials from ARCI Inside to out side scrapyard
197Fly ash BricKS masonry:- ITEM CODE :-304004392 Fly ash Bricks in sub-structure/ super structures of all thickness in cement mortar (1:6) Prop. Using best quality with frog/indent, conforming to sub-class A as per IS:1077 having crushing strength of not less than 50 kg/cm2 in cement mortar 1:6 best quality table molded bricks from approved source including cost and conveyance of all materials to site scaffolding, labor charges, racking out joints, curing, cement etc. complete for all heights. Use First quality brick, River sand &Ultratech / Ambuja cement/bharathi cement

AI Tender Summary

OUR REF NO 39678594
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 10-10-2023
Authority
Authority Name International Advanced Research Centre For Powder Metallurgy And New Materials
Work Description Annual Maintenance Rate Contract And Minor Civil Works At Arci, Hyderabad
Basic Detail
Tender No SC20220244/WO
Bidding Type Tender
Location
City balapur
State Telangana
Key Dates
Publish Date 15 Sep 2023
Submission Date 10 Oct 2023
Open Date 12 Oct 2023
Finance
Tender Value Ref. Documents
Tender Fee 1770
EMD 1.25 Lakhs
Exemption Not Available
Document List
eeb64ade-3b4b-4ea1-aa2c-22c84b481e0e.html
BOQ_810836.xls
SC20220244WO.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 15, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 10, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 12, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

eeb64ade-3b4b-4ea1-aa2c-22c84b481e0e.html

xls

BOQ_810836.xls

pdf

SC20220244WO.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders