Renovation, Testing, Commissioning And Operation And Maintenance Of Goalpara Town Water Supply Scheme Under Dhubri Division Of Assam Urban Water Supply And Sewerage Board.
Tender Value
2.09 Crore
Estimated cost
Bid Submission
06 Oct 2023
0 days left
EMD
4.19 Lakhs
Bank guarantee accepted
Document Fee
4200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goalpara → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation, Testing, Commissioning And Operation And Maintenance Of Goalpara Town Water Supply Scheme Under Dhubri Division Of Assam Urban Water Supply And Sewerage Board.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, fabrication , installation , testingand commissioning ofM.S Floating Barge on riverBrahmaputra with Size 16.00 m x 7.50m |
| 2 | Supplying, fabrication , installation , testingand commissioning of Mild Steel floating Barge to a place in position with mooring materials , anchoring devices and cable , anchormanual capstan , moveable gantrycranewith pulley of 2 tone capacityfor liftingand shifting armoured electric cableheavy equipments , (Davit) cable slip ring devices on the deck for armoured electric cable, 2.10 m x 2.40 m size storage roomforspares , T&P materials (Deckhouse) requisite bulk head with manhole to each , sufficient lighting arrangement both inside and outside the barge including supplying of 200 meterlength of 16mm MS wire rope of tested qualityincluding necessary MS forged ‘U’ clamps and lying the completed barge to RCC pedestal on river banks complete as directed |
| 3 | Supply , fitting and fixingofDouble armoured rubber flaxable Hose Pipe of Heavy duty discharge and suction conforming to IS : 3549/1983 with built in MS flange having ISI make with working pressure rating of 16 Kg/cm2 and make size 200mdia 3.50 meter long of each at Barge . |
| 4 | Supplying, installation testing & commissioning of raw water pump sets including starter panel , cables,common header etc. |
| 5 | Supply, installation, testing and commissioning of electrical driven CentrifugalRaw water pumping set ( couple type ) with suitable for operation with 415 (+10 %) V, 3-phase, 50 Hz + 3% power supplywith suitable size & specification of pump/ motor in all respect with specifacation - split case multistage (2 stg) pump set discharge 60lps, head -120m with 110kw/ 150hp/ 4 pole motor along with the assessories (MOC; Ci- casing + CF8M Impeller( Stainless steel)+ SS shaft) along with base plate, coupling, coupling guard, foundation nuts & bolts, construction & fitting of MS joist 200x6 joist foundation, supplying & fitting of starter panel of required specifification, necessary cables for connection power line from main panel board to startr panel & starter panel to pumpset , supplying & installation of one change over of required spacification all complete as directed. |
| 6 | Supplying, installation testing & commissioning of mainPanel board , including cables required to connect from transformer with all other accessoriesatBarge Site |
| 7 | Supplying fabrication & erection , testing , commissioning of vermin and dust proof (P-43 protection ) totally enclosed cubical type compartmental floor mounting panel board of size 2300 mm x1150 mm x 500 mm made of 16 SWG( 1.66mm thick CR sheet roofing on the top complete painting with 2 coats of red oxide metal primer and 2 coat of enamel paint. The panel board isto be erected in MS floating Barge including all complete neatlly wiring done with the provision for the flowing electrical accessories. Incomer 800A , 4 pole MCCB and provisionfor 11 nos TPN MCCB (i)0- 500 V(digital ) Voltmeter (ii) 0-350 A Digital ammeter-1(ii)Voltmeter selector switch (iii)Ammeter selector switch-1(iv)Indicator lamp-(R.Y.B)-3(v)Control wiring along with required size of copper busher (vi) @A solid lock fuse -3 nos (vii) 800/5 CT coil ( required capacity of MCCBfor 180 HP pump motor , 5 HP Vaccum pump and internal electrification along with Copper armoured cable for connection of pumping sets from Pnnel Board and internal wiring for Ligting arrangment (4 nos bulb/ Tube light. ) , Required capacity of MCCBfor pumps & Vaccum pump, and lighting . |
| 8 | Supply, fitting & fixing of Common header with 8 mm thich 400mm dia. , 4.0m long, with 8mm thick 200mm dia 30.0m long pipe , 14 nos flange for installtion of valves ( S/v & NRV)MS pipe for connecting 2 nos Raw water pump and Raw water pummping main andwith necessary D/F Sluice Valve PN1.6for outlet ( 200 mm dia- 4 nosand Inlet ( 200 mm dia 2 nos ), Foot valves - 2 nosand non return valves PN1.6 200 mm dia- 2 nos , Nut- bolt, Protection Jaliwith MS Rod (8 mm dia ) for around inletfoot valves , painting .in all respect. |
| 9 | Supplying & laying following size PVC/XLPE insulated and PVC sheathed 1.1kv grade solid aluminium conductor upto 10sqm balance stranded conductor , xlpe insulated , cores laid up, PVC tape inner sheathed , armoured for single core up to 70sqmm balance aluminium strip , galvanised for cables upto to 2x10 sqm 3x10 sqm , 4x6 sqm baqlance all galvanised steel strp, mextruded PVC type ST@ sheathed , 650/1100v grade as per IS 7908 (part 1) 1988 armourured UG cable UG cable laid in ground / partially in air required for termination over deptt of 75cm , refilling, trotective brick covering sand cushioning etc. complete handling of surplus spoil, debris to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/ Polycab/ Gloster/ Finolex make or equivalant. |
| 10 | i) 185 sqmm 3 & 1/2 core armoured UG cable for transformer to main panal 30m |
| 11 | Repairing and replacement ofSluice Valveswith / short / longspindle ( 7 nos), MS door and Steel window & ventilation with glass pan. Dozingmotors, Flush mixture mechanical works , Wiring , replacement of cable as per required diameter, Tube light, Ceiling Fan, plastering as where necessary , Air blowerat Treatment Plant |
| 12 | Supplying, spreading of filter media of filter Beds including lateralUPVCpipes |
| 13 | Supplying and placing ofriver gravel of different size for using as filter media free from dirt, dust or any foreign materials including inorganic dalts etcwith range of size40 mm to 50 mm - 200 mm thicness, 32 mm to 40 mm - 200 mm thickness , 12 mm to 20 mm - 100 thickness and6 mm to 212 mm - 100 thickness . andCoarse sand to use as filter media for rapid gravity filter effective size from 0.45mm to 0.70 mm and uniformity co-efficient between 1.70 and 1.80 all complete with 600 mm thickness as directed by EIC. The sand shall be hard and reistant quartzite and free from dust, clay and fine particles etc. andgravel should be freeform dust and to be washed for cleaning incudingLatteral Pipe forFilter bed : Supplying fitting fixing of UPVC pipe of 110mm diawith 6 kg/ CM2 .Including making 12 mm hole for filtration of waterincluding Bend, Teeall complete |
| 14 | Main Panel Boaard at Treatment Plantsite |
| 15 | Repairing of main panel Board at treatment plant ----Supplying, fabrication & erection , testing , commissioning of vermin and dust proof (P-43 protection ) totally enclosed cubical type compartmental floor mounting panel board of size 2300 mm x1150 mm x 500 mm made of 16 SWG( 1.66mm thick CR sheet roofing on the top complete painting with 2 coats of red oxide metal primer and 2 coat of enamel paint. The panel board isto be erected in MS floating Barge including all complete neatlly wiring done with the provision for the flowing electrical accessories. Incomer 800A , 4 pole MCCB and provisionfor 11 nos TPN MCCB (i)0- 500 V(digital ) Voltmeter (ii) 0-250 A Digital ammeter-1(ii)Voltmeter selector switch (iii)Ammeter selector switch-1(iv)Indicator lamp-(R.Y.B)-3(v)Control wiring along with required size of copper busher (vi) @A solid lock fuse -3 nos (vii) 250/5 CT coil ( required capacity of MCCBforback wash pump ( 10 HP ) and Vaccum pump(20 HP ) in all respect. |
| 16 | Supplying / installtion of including supplying installtion of motor of clarifier bridge of treatment plant |
| 17 | Repairing & paintingofFlocculator verticalhanger (outer) 65x5 ISA,Flocculatorvert. hanger (inner) 65x5 ISA,Scrapper- hanger link 50x6 ISA1,Scrapper- hanger link 50x6 ISA2,Link-hanger junction plate -8 PL1,Link-hanger junction plate -8 PL2Scrapper blade -50x10 flat,Diagonal scrapper stiffner -30x6 flat,Flocculator paddle-6PL,Paddle fixer- 65x6 ISA,otating spindle 80 mm ISRO in all respct for moving |
| 18 | Supplying , fitting & fixing of 2 nosMotor, rotor, gear assembly with all accessories with RPM 1400 including pannel Boardfor clrifluculator bridge |
| 19 | i) 15 HP Motor |
| 20 | ii)12HP Motor |
| 21 | Labour Charge for removing Mud from Clarifluculatorand cleaning the inside properly for smoothly moving the clarifier bridge. |
| 22 | Painting of complete Tratment Plant and boundary wall |
| 23 | Painting of complete tratment plant( Filte house, Chemical house, Raw water Channeland Aeraorincluding boundary wall with supply of all materials making all arrangementsfor paintings all complete as directed . Two coatsat Inside Acrylic emulsion wallpaint and outside weather coats . Boundary wall painting withtwo coats of Durocem/ Snowcemincluding removing of old paint . Metal surface withred oxside primer and two coats ofsanthetic enamal paintafter removing old paint |
| 24 | Supply, laying, Road Crossing, Culvert Crossing, Drain/ Nalla Crossingand commissioning of distribution pipe network byHigh Density polyethylene [ HDPE (PE80)] pipes including all specials confirming to IS 4984 and the specifications, including third party inspection, all taxes and duties, transportation, freight charges, loading and unloading, conveyance to the project site and stacking with cost of all labor and material , including excavation in trenches, dismantling of all type of pavements, sand bedding as required, backfilling of trenches and foundations with approved graded excavated materials and approved graded river sand as required including loading and unloading , Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete for distribution system as per Technical Specificationsper Employer\"s Requirements.withpipe diameters- 100 mm dia - 4 nos, 150 mm dia-2 nos , 200 mm dia-2 nos and 250 mm dia - 2 nos |
| 25 | 100 mm dia pipe |
| 26 | 160 mm dia pipe |
| 27 | 200 mm dia pipe |
| 28 | ForRoad Crossing, Culvert Crossing, Drain/ Nalla Crossingwith MS pipe having7.90 mm thickness includingwelding painting fitting & fixing alongwith all required materials and restoration in all respect |
| 29 | 100 mm dia pipe |
| 30 | 160 mm dia pipe |
| 31 | 200 mm dia pipe |
| 32 | 250 mm dia pipe |
| 33 | Trial Runn of Goalpara WSS for 6 month |
| 34 | For Operation and maintenance of the schemerequired the materials likeAlum, Bleaching Poweder, Limeand Power consupsion ( ASEB ) bill both intake and Treatment Plant site for 6 months |
| 35 | Payment for outstanding Electricity Bill(arear) including reconnection charges as admissible of APCDL |
AI Tender Summary
Tender Timeline
Sep 15, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender