Improvement Works To The Existing Toilet Blocks, Dress Changing Rooms Available In The Nalatheertham, Two Toilet Blocks Available In The Ring Road And Resting Hall At Sri Nalanarayana Perumal Kovil, Thirunallar In Connection With Sanipeyarchi Festival 202
Tender Value
18.54 Lakhs
Estimated cost
Bid Submission
20 Sep 2023
0 days left
EMD
37098
Bank guarantee accepted
Document Fee
525
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thirunallar → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Works To The Existing Toilet Blocks, Dress Changing Rooms Available In The Nalatheertham, Two Toilet Blocks Available In The Ring Road And Resting Hall At Sri Nalanarayana Perumal Kovil, Thirunallar In Connection With Sanipeyarchi Festival 2023.
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand). |
| 2 | Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand). |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). |
| 4 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete - 40mm thick with 20mm nominal size stone aggregate. |
| 5 | 12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand). |
| 6 | 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand). |
| 7 | 20mm cement plaster of mix 1:4 (1cement : 4 fine sand). |
| 8 | Providing and applying ready mixed wall putty (JK / BIRLA ) of 2mm thickness overplastered surface to prepare the surfaceeven and smooth complete. |
| 9 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete. |
| 10 | Applying one coat of cement primer of approved brand and manufacture on wallsurface - Cement primer. |
| 11 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old wotk to give an even shade. |
| 12 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4fine sand). |
| 13 | Wall painting with plastic emulsion paint -Premium of approved brand and manufactureto give an even shade - two or more coats on new work. |
| 14 | Wall painting with plastic emulsion paint of approved brand and manufacture to givean even shade - One or more coats on old work. |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work. |
| 16 | Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flusing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid. |
| 17 | Extra for using coloured pedestal type WC pan (European type) with low level cistern of same colour instead of white vitreous china WC pan and cistern. |
| 18 | Providing & fixing white vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including allnecessary materials, labour and disposal of dismantled material i/c malba , all complete - Orissa pattern W.C.Pan of size 580x440 mm. |
| 19 | Extra for using coloured W.C.pan instead of white W.C.pan - Orissa pattern W.C.pan 580x440mm. |
| 20 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings - flat back wash basin of size 550x400mm. |
| 21 | Providing and fixing to existing door frames - 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (+- 0.3mm ). PVC foam end cap of size 23 x 10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. An M.S.tube havingdimensions 19 mm x 19 mm and 1.0 mm (+- 0.1mm) is inserted along the hinge side of the door. Core of the door Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end -cap of the size 25 mm x 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer\"s specification to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. |
| 22 | Providing and fixing factory made P.V.C. door frame of size 50x 47 mm with a wall thickness of 5mm , made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 nos , of 150mm long brackets of 15 x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19 x19 mm M.S.square tube of 19 gauge , EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall using M.S.screws of 65 / 100 mm size, complete as per manufacturter\"s specification. |
| 23 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing fixed to wooden cleats with C.P.brass screws and washers complete - rectangular shape 600x450 mm. |
| 24 | Providing and fixing C.P.brass bib cock of approved quality conforming to IS: 8931 - 15 mm nominal bore. |
| 25 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms - 15mm nominal bore. |
AI Tender Summary
Tender Timeline
Sep 15, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender