Tender For Half Yearly Maintenance And Repair Works Of Residential Colony At Victoria Park, Meerut For The Financial Year 2023-24., meerut-Uttar Pradesh

Tender For Half Yearly Maintenance And Repair Works Of Residential Colony At Victoria Park, Meerut For The Financial Year 2023-24.- 1 Excavation In Foundation In Ordinary Soil ( Loam, Clay Or Sand ) Including Lift Upto 1.5 Metreand Lead Upto 30 Metreincluding Filling, Watering, And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And The Side Of The Foundation Or In To The Plinth And Removal & Disposal Of Surplus Earth As Directes By The E / I Up To A Distance Of 30M From The Foundation Trenches. Csi No. 4.01 2 Clearing Jungle Including Uprooting Of Rank Vegetations, Grass, Bush, Wood, Trees And Saplings Of Girth Upto 30Cm Measured At A Height Of 1.0M Above Ground Level And Removal Of Rubbish Upto A Distance Of 50M Outside The Periphery Of Uppcl Area Cleared. Csi No. 4.08 3 Cleaning Of Grass And Removal Of Rubbish Upto A Distance Of 50 Moutside The Uppcl Area Cleaned. Csi No. 4.09 4 Earth Filling Under Floors And / Or Sub Station Area Including Cost Of Earth When Obtained From With In 8 Kmoutside Uppcl Area Including Its Roylty And Carriage Including Watering, Ramming In 20 Cm Layers And Dressing Of Earth Etc. All Complete. Csi No. 4.10 5 Earth Filling In Bulk In Open Areas Including Cost Of The Earth When Obtained From Outside Corporation’S Area Including Its Carriage, Loading / Unloading, Spreading, Watering And Ramming In 20Cm Layers And Dressing Of Earth Etc. Rates Including Cost Of Earth, Labour, T&P And Royality Of Earth Etc. Required For Proper Completion Of The Work.Csi No. 4.11 ( As Per Old Schedule 2020-21 ) 6 Providing And Injecting Chemical Emulsion For Post Constructional Anti-Termite Treatment Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ 1 Liter / Hole At 300Mm Interval Including Drilling 12Mm Dia Holes And Plugging Them With Cement Mortar 1:2 ( 1 Cement : 2 Coarse Sand ) After Filling With Chlorpyriphose / Lindane E.C. 20% With 1% Concentration.Csi No. 4.15 ( As Per Old Schedule 2020-21 ) 7 Concrete With 4Cm Gauge I Class Brickballast, Coarse Sand ( F.M. 1.8 To 2.5 ) And Cement In Proportion Of 12:6:1 In Foundations And Under Floors Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion. Csi No. 5.01 8 Concrete With 4Cm Gaugestone Ballast, Coarse Sand ( F.M. 1.8 To 2.5 ) & Cement In Proportion Of 12:6:1 In Foundations &Under Floors Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion. Csi No. 5.02 9 Concrete With 4Cm Gauge I Class Brickballast, Coarse Sand ( ( F.M. 1.8 To 2.5 ) And Cement In Proportion Of 10:5:1 In Foundations And Under Floors Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion. Csi No. 5.03 10 Cement Concrete With 2Cm Gauge Approved Hard Stone Ballast, Coarse Sand ( F.M. 1.8 To 2.5 ) And Cement In Proportion Of 4:2:1Including Supply Of All Materials, Labour, Side Shuttering Ifrequired And T&P Etc. Required For Proper Completion Of Work.Csi No. 5.06 11 Precast Cement Concrete Door Sills, Chaukhats Boundary Posts, Shelves And Similar Small Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And 2 Cm Gauge Graded Approved Hard Stone Ballast In The Proportion 1:2:4, Excluding Reinforcement But Including Fixing The Same In Position Including Cost Of All Other Material, Labor And T&P.Csi No. 5.09 12 Rcc Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And2 Cm Gauge Graded Approved Hard Stone Ballast Like Granit, Quartzite Etc From Dalla, Jhansi Or Other Quarries In Proportion 1:2:4In Lintels Of Doors And Windows, Excluding Supply Of Reinforcement & Its Bending But Including Its Fixing And Binding The Same With Binding Wire, Including Cost Of All Other Materials Labour And T&P.Csi No. 5.10 13 Rcc Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And2 Cm Gauge Graded Approved Hard Stone Ballast Like Granite, Quartzite Etc From Dalla, Jhansi Or Other Quarries In Proportion 1:1.5:3Inslab, Excluding Supply Of Reinforcement & Its Bending But Including Its Fixing And Binding The Same With Binding Wire, Including Cost Of All Other Materials Labour And T&P.Csi No. 5.24 14 Rcc Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And2 Cm Gauge Graded Approved Hard Stone Ballast Like Granite, Quartzite Etc From Dalla, Jhansi Or Other Quarries In Proportion 1:1.5:3Inlighter Beams I.E. Having Span Upto6m, Excluding Supply Of Reinforcement & Its Bending But Including Its Fixing And Binding The Same With Binding Wire, Including Cost Of All Other Materials Labour And T&P.Csi No. 5.25 15 Rcc Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And2 Cm Gauge Graded Approved Hard Stone Ballast Like Granite, Quartzite Etc From Dalla, Jhansi Or Other Quarries In Proportion 1:1.5:3In Rcc T Beam-Slab And Column, Excluding Supply Of Reinforcement & Its Bending But Including Its Fixing And Binding The Same With Binding Wire, Including Cost Of All Other Materials Labour And T&P.Csi No. 5.29 16 First Class Brick Work In 1:6 Cement And Coarse Sand ( F.M.1.8 To 2.5 ) Mortar In Foundation And Plinth Including Supply Of Allmaterials, Labour & T&P Etc. Required For Proper Completion Of Work.Csi No. 6.01 17 1St Class Brick Work In 1:6 C.M. With Cement And Coarse Sand Of 2.25 F.M. Mortar In Super Structure Including Necessary Cutting And Moulding Of Brick As Required Including Honey Comb Brick Work, Thickness Of Wall One Brick ( 230Mm ) Thick In Super Structure. Csi No. 6.01+6.07+6.08 18 Same As Item No. 17 Above But For Wall Of Half Brick 4.5” ( 115 Mm ) Thick But In 1:6 C.M. With Cement And Coarse Sand Of 2.25 F.M. Mortar. Csi No. 6.01+6.07+6.09 19 Brick Work In Foundation & Plinth With Old Dismantledbricks ( Supplied By Department Free Of Cost ) And Coarse Sand Of F.M. 1.8 To 2.5Mortar In 1:6 Including Supply Of All Other Materials, Labour, Removing Mortar & Cleaning Of Old & Used Bricks, T&P Etc Complete. Csi No. 6.18 20 Same As In Item 6.18 Above Butin Super Structure For 230 Mm Thick Wall. Csi No. 6.19 21 Supply And Filling Brick Bat In Soak Pit Including All Labour, Material And T&P Etc Complete. ( For 01 Soak Pit ) . Csi No. 6.23 22 2.5 Cm. Thick Damp Proof Course Of Cement Concrete Consisting Of 1 Part Cement 1.5 Parts Approved Coarse Sand ( F.M.1.8 To 2.5 ) , And3 Parts Approved 12 Mm. Graded Stone Grit And Also Including Liquidwater Proofing Material As Approved By The Engineer-Incharge In The Proportions Specified By The Manufacturer.Csi No. 7.02 23 Indian Sal Wood Wrought Framed And Fixed Including Simple, Mouldings Straight Work As In Chaukhats Including Supply Of Allmaterials, Labour And T&P Etc.Required For Proper Completion Ofthe Work. Csi No. 8.03 24 Country Wood Wrought Framed And Fixed Including Simple, Mouldings Straight Work As In Chaukhats Including Supply Of Allmaterials, Labour And T&P Etc.Required For Proper Completion Ofthe Work. Csi No. 8.04 25 Additional Cost For Fixing Glass Panes With 4.5 Cm. Thick C.P.Teak Wood Fully Panelledincluding Cost Of Materials, Labour Andt&Petc. Required For Proper Completion Of The Work. Csi No. 8.08 26 Supply And Fixing Stopper With Rubber Pad Of Chromium Polished Iron Fitting With Screws For Doors And Windows Etc. Csi No. 8.17 ( L ) ( As Per Old Schedule 2020-21 ) 27 S / F Of 25Mm Dia Decorative Curtain Rod With Decorative And Caps, Matching Curtain Rings, Including Fixing With Necessary Clamps, Pvc Gully, Steel Screws Etc. Complete.Csi No. 8.19 ( As Per Old Schedule 2020-21 ) 28 Providing And Fixing 19Mm Thick Ply Board / Block Board For Wardrobe Shutter Etc. Of Reliance Or Scorpio Or Equivalent Make Including Teak Wood Beading Around The Shutter And Including Fixing And Adjustment Of Hinges, Bolts Handle And Other Fittings But Excluding Their Supply And Including Cost Of All Material Labour, T&P Etc. Required Forthe Proper Completion Of The Work.Csi No. 8.25 ( As Per Old Schedule 2020-21 ) 29 Providing And Fixing Of 25×10Mm Size Tapered Shape Teak Wood Beading Of Approved Design And Fixing With Nails And Screw As Directed By E / I Including Cost Of All Material Labour, T&P Etc. Required Forthe Proper Completion Of The Work. Csi No. 8.26 ( As Per Old Schedule 2020-21 ) 30 Providing And Placing 6 Mm Thick A.C. Plain Sheet In False Ceiling In Proper Level And Alignment Complete.Csi No. 8.29 ( As Per Old Schedule 2020-21 ) 31 P / Fof 6.0Mm Thick Water Proof Commercialquality Plywood In Partition Work To Make 5X4mm Size Groove At Specified Intervals. Ply Shall Be Fixed By Means Of Glue And Headless Nailsat 100Mm C / C Complete. Cost Including All Labour, Material, T&P Required For Proper Completion Of Work. Csi No. 8.30 ( As Per Old Schedule 2020-21 ) 32 Supply And Fixing Of 4.0 Cm Thick C.P Teak Wood Door And Window Jali Shutters Withpanels Of Heavy Quality Galvanized Iron Wire Mesh Of Size 14 X 24 Withnecessary Beading Including Supply And Fixing Of Wooden Cleats And Stopsand Including Fixing And Adjustment Of Hinges. But Excluding Supply Of Fixtures. Csi No. 8.37 33 S / F Galvanized Mosquitos Proof Heavy Quality Iron Wire Gauge ( 14X24 ) Over Window Frames And Including Supply Of C.P. Teak Wood Battens 8Cm X 1Cm. And Including Supply And Fixing Of Necessary Screws, All Materials, Labour Andt&P Etc. Required For Proper Complete. Csi No. 8.43 34 Fixing Of Departmental Doors & Windows Shutters Including Supply& Fixing Of Hinges And Other Fixtures. ( Excluding Their Supply ) Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work.Csi No. 8.51 35 P / F Fully Anodized Aluminium Fixed Glazing With Hindalco Or Equivalent Extruded Standard Sections14gauge ( 2.41Mm Thick ) Of Various Cross Sections And Joints Mitred And Jointed As Shown In Drawingincluding Providing & Fixing 5.5 Mm Thick Toughened Glass With Neoprene Beading & Aluminium Glazing Clips All Around. The Minimum Thickness Of Anodizing On All Aluminiumsections Should Be 20 Microns With A ( + ) 2 Microns Tolerance . The Rate Should Include The Cost Of Fixing The Aluminum Frame On Teak Wood Frame Or Finished Wall ( Rb / Rcc / Masonry ) Surface By Means Of 80 Mm Long Approved Counter Sunk Screws Provided At 500 Mm C / C Or Part There Of Starting From 100 Mm Above The Bottom In Vertical Member And 100 Mm From Both The Ends Of Horizontal Top And Bottom Member Excluding Cost Of Teak Frame But Including Cost Of All Other Material, Labour, Tools & Plants Etc. Complete. Csi No. 8.52 36 Same As Above Item No. 8.52 But For Openable Window Portion As Shown In Drawings, Including Cost Of Aluminium Hinges And All Other Fittings Like Concealed Towerbolts Handles Etc Of Approved Quality And Including Cost Of All Other Material, Labour, Tools & Plants Etc. Complete. Csi No. 8.53 37 S / Fixing Of Double Action Floor Springs Including Cutting In Floors / Rcc Slabs And Grouting The Same With C.C. & Finishing The Surface Properly As And Where Required Under Aluminium Doors As Per Direction Of Engineer-In-Charge.Including Cost Of All Other Material, Labour, Tools & Plants Etc. Complete. Csi No. 8.52 38 Supply And Fixing Of 32 Mm Thick Single Leaf Flush Door Shutter ( Boiled Water Resistance, Phenol Maldehide Resin Bonded, Hot Pressed Factory Made ) Commercial Quality To I.S.2202 Part-1 ( 1983 ) Isi Marked Including Fixing Of Wooden Cleats And Stoppers And Including Fixing And Adjustment Of Hinges, Bolts.Locks, Handles, Springs And Other Fittings But Excluding Their Supply Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. Csi No. 8.54 39 Supply And Fixing Brass Polished Hydraulic Door Closure Of Approved Make & Quality Its Fixing And Adjustment With The Help Of Screws, Nuts And Bolts Including Supply Of All Labour, T & P Etc. Required For Proper Completion Of The Work. Csi No. 8.57 40 Supplying & Fixing 24 Gauge Annodized Aluminium Sheet Of Approved Quality Including Cutting, Wastage And Fixing The Same Over The Wooden Door Shutters With Nails With All Material, Labour And T&P.Csi No. 8.60 41 Providing And Fixing In Place A Full Height Storage Cabinet 600 Mm Deep Made With 19 Mm Thick Isi Marked Ply Borad, All Interior Surfaces To Finished With Pasting Of 0.8 Mm Thick Mica And All Exterior Surfaces To Be Finshed With Pasting Of 1 Mm Thick Mica Of Texture And Colour As Approved By Engineer In Charge Including All Labour, T&P, Other Items Like ( But Not Limited To ) Fevicol, Nails Screws, Higes, Sliders, Door Handles, Multipurpose Lock Of Godrej Or Equivalent Rate Etc. Required For Proper Completion Of Works, To Be Measured Interms Of Front Area Only. Csi No. 8.64 ( Sor 22-23 ) 42 Mild Steel Or Iron Work In Heavy Sizes Such As Trusses Built Upgates, Door Frames, Record, Racks Roof Work Gates Etc. Wrought Torequired Form Including Holes Rivetting Or Welding Where Necessary And Also Fixing In Proper Position And Alignment Including Cost Of All Materials Supplied By Contractor.Csi No. 9.01 43 As In Item 9.01 Above But When Steel Is To Be Provided By The Department. Csi No. 9.02 44 Tmt / Tor Steel In Plain Work Such As Reinforced Concrete Orreinforced Brick Work ( When Not Included In An Over All Rates ) Wrought To Required Shape As Necessary Including Bending Forproper Completion Of The Work And Including Supply Of Steel Its Wastage, Bend, Hooks And Authorized Overlapping Shall Be Measured. ( Steel Shall Be Arranged By The Contractor ) . Csi No. 9.03 45 Supply And Fixing Rolling Shutter Of Approved Make Made Of ( 18×125 ) Mm M.S. Laths Interlocked Through Their Entire Length And Joint Together At The End By End Locks And Mounted On Specially Designed Pipe Shaft With Brackets Side Guides And Arrangement For Inside And Outside Locking With Push And Pull Operation Complete But Excluding The Cost Of Top Cover And Spring.Csi No. 9.05 ( As Per Old Schedule 2020-21 ) 46 Supply And Fixing Galvanised Mosquito Proof Jali ( 16X24 Gauge ) Withm.S. Flat Of 20 X 3 Mm. Size, On Both Sides Screwed Or Welded To Windowor Door Frame.Csi No. 9.18 47 P / F In Position Collapsible Steel Shutter With Vertical Channels 20 X 10 X 2 Mm. ( 3 / 4 X 3 / 8X 1 / 12 ) And Braced With Flat Iron Diagonals 20 X 5 Mm. ( 3 / 4 X 3 / 16 ) Size With Top And Bottom Rails Of TIron 40 X 40 X 6 Mm. ( 1 / 2 X 1-1 / 2 X 1 / 4 ) With 38 Mm Dia Steel Pullys With Bolts, Nuts, Nuts Locking Arrangement, Stoppers, Handles Complete Including Applying A Priming Coat Of Approved Red Oxide Paints.Csi No. 9.29 48 P / F Concertina Coilfencing With Required Dia. 600 Mm Upto 3 M Height Of Wall Between Existing Angle Iron ‘Y’ Shaped Placed 2.4 M Or 3.0 M Apart And With 6 Horizontal R.B.T. Stud Tied With G.I. Staples And G.I. Clips To Retain Horizontal Including Necessary Bolts Or G.I. Barbed Wire Tied To Angle Iron All Complete ( No. Of Rounds Will Be 7 To 8 In One Meter Length ) As Per Direction Of Engineer I / C With Reinforced Barbed Tape ( R.B.T. ) / Spring Core ( 2.5Mm Thick ) Wire Of High Tensile Strength Of 165 Kg / Sqmm With Tape ( 0.52 Mm Thick ) Of Supreme Make Or Equivalent And Weight 43.478 Gm / Meter ( Cost Of Ms Angle, C.C. Blocks Shall Be Paid Separately ) . Csi No. 9.37 49 Supply And Fixing 24 B.W.G , G.C. Iron Sheet Roofing .Fixed In Position With J Or U Bolts 10 Mm. Dia With G.I. Limpet & Bitumen Washers Including Supply Of All Materials, Labour, Wastage. And T&P Etc. Required For Proper Completion Of The Work.Csi No. 10.01 50 Supply And Fixing 6 Mm Thick Grey Corrugated Asbestos Sheet. Including Supply Of All Materials, Labour, Wastage. And T&P Etc. Required For Proper Completion Of The Work. Csi No. 10.03 51 Supply And Laying One Layer Of Tar Felt Or Any Other Equivalent Approved Material At The Junction Of Wall & Roof Or At Any Place As Per Direction Of The Engineer-Incharge Including Necessary Overlap, Applying A Coat Of Approved Mastic Paint Below The Tar Felt & Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 10.06 52 Providing And Laying Polythene Sheet Of Approved Quality In Double Layer Of Wt. 0.120 Kg / Sqm With 100 Mm Over Lapping Along Roof Slope As Per Direction Of E / I Complete.Csi No. 10.08 ( As Per Old Schedule 2020-21 ) 53 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Three Part Of Coarse Sand ( 1:3 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Materiallabour And T&P Etc For Proper Completion Of Work. Csi No. 11.06 54 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Four Part Of Coarse Sand ( 1:4 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. Csi No. 11.07 55 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Six Part Of Coarse Sand ( 1:6 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. Csi No. 11.09 56 Add For Extra Labour To All Items Of Plaster If Done In Ceiling.Csi No. 11.10 57 2 Cm. Thick Cement Plaster In Dado Or Skirting In 1:2 Consisting Of Onepart Of Cement And Two Parts Of Approved Coarse Sand Laid Inpanels Finished With 3Mm.Floating Coat Of Neat Cement Or Cementand Marble Dust In Ratio Of 5:1 Including Supply Of All Materials, Labour & T&P Etc. Required For Proper Completion Of The Work.Csi No. 11.13 58 Providing ( 12X15 ) Mm Section Groove In Plasterincluding All Material, Labour Andt&P Etc. Required For Proper Completion Of The Work.Csi No. 11.16 59 Making Drip Coarse ( 25X12 ) Mm In 1:2 Cement And Coarse Sandincluding Supply Of All Materials, Labour And T&P Etc Requiredfor Proper Completion Of Work. Csi No. 11.19 60 3 Mm Thick Floating Coat Of Neat Cement Finish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Cement Consumption 0.044 Bag / Sq.M. ) . Csi No. 11.20 61 2.5 Cm Thick 1:2:4 Plain Cement Concrete Floor With Cement, Approved Coarse Sand & 2Cm Graded Approved Stone Ballast Laid In Panels Finished With 3Mm Floating Coat Of Neat Cement Or Cement And Marble Dust In Ratio Of 5:1 As Specified And Removing Any Overlapping Mortar At The Joints Of The Panels If Any And Giving Them A Uniform Finish Including Supply Of All Materials, Labour And T&P Etc, Required For Proper Completion Of The Work. Csi No. 12.02 62 4.0 Cm Thick 1:2:4 Plain Cement Concrete Floor With Cement, Approved Coarse Sand & 2Cm Graded Approved Stone Ballast Laid In Panels Finished With 3Mm Floating Coat Of Neat Cement Or Cement And Marble Dust In Ratio Of 5:1 As Specified And Removing Any Overlapping Mortar At The Joints Of The Panels If Any And Giving Them A Uniform Finish Including Supply Of All Materials, Labour And T&P Etc, Required For Proper Completion Of The Work. Without Base Cc. Csi No. 12.04 63 First Class Bricks On Edge Floor Laid Dry, Joints Sand Filled, Including Preparation Of Base To Proper Slope And Its Rammingincluding Supply Of All Material Labour & T&P Etc. Required Forproper Completion Of The Work. Csi No. 12.07 64 Same As In Item 12.07 Above But Bricks Laid Flat.Csi No. 12.08 65 Supply And Laying 6 Mm Thickglazed Tiles In Skirting / Dado Laid With1:3 Cement And Approved Coarse Sand Mortar Finished With Whitecement Slurry, Jointing And Polishing Complete, Including Supplyof All Materials, Labour And T&P Etc. Completion Required For Proper Completion Of The Work.Csi No. 12.12 66 Providing And Fixing Glass Strips Of 3.15 Mm Thickness & 25Mm Depth In Jointsof Floor And Skirting At The Time Of Laying Floors, Flush Withfloor Level Including Supply Of All Materials, Labour& T&P Etc.Required For Proper Completion Of Work. Csi No. 12.13 67 Providing And Fixing Glass Strips Of 3.15 Mm Thickness & 40Mm Depth In Jointsof Floor And Skirting At The Time Of Laying Floors, Flush Withfloor Level Including Supply Of All Materials, Labour& T&P Etc. Required For Proper Completion Of Work.Csi No. 12.14 68 Providing And Fixing 18Mm Thick Polished Baroda Green Stone Of Approved Shade And Pattern In Floor Or On Top Of Kitchen Slab Etc. Laid With 1:3 Cement And Coarse Sand Mortar And Jointing With White Cement Mixed With Pigment To Match The Shade Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of Work.Csi No. 12.14 ( As Per Old Schedule 2020-21 ) 69 Providing And Laying18mm. Thickkotastonein Flooring Or Skirtingoverbasecementmortar 1:4 Mix And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of Slab Including Rubbing And Polishing Complete And Including Supply Of All Materials Labour And T&P Etc Required For Proper Completion Of The Work.Csi No. 12.17 70 Providing And Laying Floor Of 8 Mm Thick Vitrifiedtiles In Flooring Or Skirting Of Approved Brand ( Bell, Johnson Or Equi. Make ) Size Of 600X600 Mmof Approved Shade, Colour And Pattern , Laid Over Base Cement Mortar 1:4 Mix Including Finishing The Joints With White Cementmixed With Pigment To Match The Shade Of Tile Including Cost Of All Material, Labour And T&P Required For Proper Completion Of The Work.Csi No. 12.18 71 Providing And Laying Of 16 Mm Thick Granite ( Black / Brown ) Inflooring Or Skirting , Of Approved Shade, Colour, Size And Pattern , Laid Over Base Cement Mortar 1:4 Mix Including Finishing The Joints With White Cementmixed With Pigment To Match The Shade Of Granite Floor Including Cost Of All Material, Labour And T&P Required For Proper Completion Of The Work, As Per Direction Of Engineer Incharge. Csi No. 12.20 72 S / F 10Mm Thick Group 25 Acid Resisting Tiles Of “Somany” Or Equivalent Approved Make In Flooring Or Skirting ( Confirming To I.S. 4457 - 1967 ) In Ordinary Portland Cement And Coarse Sand In Ratio 1:3 With The Joints Filled With Acid Resistant Cement “Accocide” Of A.C.C. Or Equivalent Make Acid Resistant Cement And Liquid Supplied With Cement, Mixed In 1:3 Ratio To Make A Workable Paste In G.I. Tray. The Joints Should Be Kept As 5Mm And To Be Cured For 7 Days With Dilute Hcl ( One Part Acid And Three Parts Of Water ) . Rate Should Be Including The Cost Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 12.22 73 Supply Of 80 Mm Thick I Shaped Mechanically Compressed Inter Locking Cement Concrete Paver Block Manufactured By High Pressure & Controlled Vibration Machine Having Plan Dimension 200X ( 160+120 Mm ) With Minimum 5 Mm Thick Toping Of O.P.Cement Mixed With 25% Marble Powder. The Compressive Strength Of Concrete Pavers Blocks Shall Not Be Less Than 30 Mpa & 4.5 Kg / No. Including Cost Of All Material, Labour, T&P Etc. Required For Proper Completion Of Work As Directed By Engineer-In-Charge But Excluding G.S.T. Which Shall Be Paid Extra As Per Rules.Csi No. 12.23 74 Painting Or Varnishing New Iron Work In Small Areas Or New Woodwork With One Coat Of Ready Mixed Priming Paint And One Coat Ofapproved Superior Quality Ready Mix Paint Luxol Or Equivalentbrand Or Varnish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Paint To Be Used Should Conform To The I.S. 103-1950. Csi No. 13.01 75 Same As In Item 13.01 Above But For Every Coat After First Coat.Csi No. 13.02 76 Same As In Item 13.01 Above But For Every Coat On Previously Paintedold Wood Or Iron Work Including Its Sand Papering, Rubbing Andcleaning As Required, For Proper Completion Of Work. Csi No. 13.03 77 One Priming Coat And One Coat Oil Bound Distemper On New Work Includingsupply Of All Materials, Labour And T&P Etc. Required For Propercompletion Of The Work. Csi No. 13.08 78 Same As In Item 13.08 But For Every Coat After The First Coat. Csi No. 13.09 79 Same As In Item 13.08 But For Every Coat On Previously Old Oil Bound Distemper Surface. Csi No. 13.10 80 Applying P.O.P Plaster With Minimum 6Mm To 10Mm Thick Plaster Of Paris Putty On Plastered Surface Of Walls / Ceilings For Smooth Finish Including Its Preparation Of Surface After Applying Oil Based Primer And Chalk Putty Over P.O.P. Rates Including Cost Of All Labour, Material, T&P Etc. Required For Proper Completion Of Work. Csi No. 13.16 ( As Per Old Schedule 2020-21 ) 81 Same As Above Item No. 13.16But Making P.O. P. Cornice 100Mm×100Mm Size Approved Shape And Design At Junction Of Ceiling And Wall Including Cost Of Necessary Centering And Shuttering P.O.P., Its Wastage, T&P Etc. Required For Proper Completion Of Work.Csi No. 13.17 ( As Per Old Schedule 2020-21 ) 82 Making P.O.P. Fan Ring / Circle On Ceiling Of Room Of Approved Shape And Design Approved By E / I Including Cost Of All Materials, Labour T&P Complete.Csi No. 13.18 ( As Per Old Schedule 2020-21 ) 83 Applying Birla Or Equivalent Putty On New Interior Or Exterior Surface Over One Coat Of Water Based Cement Primer Of Ici Or Equivalent Brand For Smoothening And Levelling Of The Surface As Per Requirement And Direction Of Engineer I / C Including Cost Of All Material, Labour, T & P Etc Required For Proper Completion Of Work. Csi No. 13.20 84 Applying Birla Putty Or Equivalent Putty On Previousaly Bila Putty Smoothen Surface Over One Cost Of Water Base Cement Primer Of Ici Or Equivalent Brand For Smoothining And Leveling Of The Surface As Per Requirement And Direction Of E / I Including Cost Of All Material , Labour And T&P Required For Proper Completion Of Work. Csi No. 13.21 85 Painting One Coat With Apex Or Equivalent Brand Weather Coat Paint On New Wall Surfaces ( Well Prepared With Birla Putty And One Coat Of Primer Ici Or Equivalent Which Shall Be Paid Separately ) Including Through Washing With Water Including Cost Of All Materials, Labour, T&P Required For Proper Completion Of Work.Csi No. 13.22 86 Same As In Item No 13.22 Above But For Every Coat Of Additional Apex Or Equivalent Brand Weather Coat Paint. Csi No. 13.23 87 Same As In Item 13.22 But For Each Coat Ofapex Or Equivalent Brand Weather Coat Paint .On Previously Treated Surface.Csi No. 13.24 88 Spirit Polish Over New Wood Work After Rubbing Down The Surface, Withsand Paper To Give Smooth And Shining Surface Including Cost Ofall Materials, Labour, T&P Required For Proper Completion Of Thework. Csi No. 13.29 89 Spirit Polish Over Previously Polished Wood Surfaceafter Rubbing Down The Surface, Withsand Paper To Give Smooth And Shining Surface Including Cost Ofall Materials, Labour, T&P Required For Proper Completion Of Thework.Csi No. 13.30 90 White Washing One Coat Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 14.01 91 White Washing Two Coat Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 14.02 92 Colour Washing One Coat, Using Approved Colouring Material And Colourincluding Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 14.04 93 Same As In Item 14.04 Above But For Each Coat After The First Coat. Csi No. 14.05 94 Dismantling Brick Work Or Stone Work In Lime Or Cement Mortar Andincluding Stacking Of Materials As Directed By Theengineer-In-Charge Within A Distance Of 60 Metres. Csi No. 15.01 95 Dismantling Reinforced Cement Concrete Or Reinforced Brick Work, Including Stacking Of Dismantled Materials As Directed By Theengineer-Incharge Within A Distance Of 60 Metres. Csi No. 15.03 96 Dismantling Cement Concrete Or Brick Or Granolithic Floorsincluding Base Concrete And Including Stacking Of Dismantledmaterials As Directed By The Engineer In-Charge Within A Distanceof 60 Metres. Csi No. 15.05 97 Dismantling Doors Or Window Leaves Including Stacking Ofmaterials As Directed By The Engineer I / C Within A Dist. 60 M. Csi No. 15.09 98 Dismantaling Doors And Windowschowkhatsincluding Stacking Of Materials As Directed By Engg-In-Charge Within A Distance Of 60 Meters. Csi No. 15.10 99 Dismantling Existing Plaster Including Disposal Of Refuse Asdirected By The Engineer-I / C Within A Distance Of 60 M.Csi No. 15.11 100 Scrapping Old White Or Colour Wash Or Distemper Including Disposal Of Refuseas Directed By The Engineer-I / C Within A Distance Of 60 M.Csi No. 15.12 101 Cleaning Of Existing W.B.M. Surface & Laying Premix 20Mm Thick Over A Tack Coat With Graded Approved Grit, Heating The Paint To The Required Temperature & Mixing Either In Mixture Or Hand Drums Including Cartage Of Mixture Or Hand Drums And, Maintenance Of Side Patries And Watering Them During Operation And Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 18.07 102 Same As In Item No. 18.07 Above But In Laying Premix 4.0 Cm Thick.Csi No. 18.08 103 Laying Seal Coat With 6 Mm Size Graded Stone Grit And Bitumen Including Heating The Bitumen Paint To Required Temperature Including Cartage And Cost Of Materials, Labour, T&P Etc. Required For Propercompletion Of Work.Csi No. 18.09 104 Boring With 150 Mm Dia Casing Pipe To A Probable Depth Of 60 M From Ground Level With Skilled And Unskilled Labour Including All T&P And Boring Apparatus And Supervision Charges Etc, Required For Proper Completion Of The Work For Submersible Pump Set.Csi No. 18.41 ( As Per Old Schedule 2020-21 ) 105 Extraction Of Casing Pipe 150Mm. Dia After Completion Of Lowering Of Pipe Assembly Including All Labour And T & P Etc. Complete.Csi No. 18.42 ( As Per Old Schedule 2020-21 ) 106 Providing110mm Dia Plain Pvc Casing Pipes ( Aroma / Supreme ) ( Pressure10 Kg. / Sqcm. ) For Making Tubewell Assembly And Cartage To Boring Site, Including Cost Of All Labour, Materials And T&P Required For Assembly Making And Proper Completion Of Work.Csi No. 19.08 107 Edging With Bricks Laid Dry Lengthwise Including Excavation, Refilling, Consolidating With Hand Packing And Spreading Neatly Surplus Earth With In A Lead Of 50 M 75 Class Designation 1 Fps Bricks. Csi No. 19.09 ( As Per Old Schedule 2020-21 ) 108 Providing 110Mm Dia Slotted Pvc Casing Pipes ( Aroma / Supreme ) ( Pressure10 Kg. / Sqcm. ) For Making Tubewell Assembly And Cartage To Boring Site, Including Cost Of All Labour, Materials And T&P Required For Assembly Making And Proper Completion Of Work. Csi No. 19.10 109 Supply And Plantation Of Following Tree:- ( A ) Polyalthia Pendula ( Ashoka Pendula ) / Cut Sagaun / Ficus Etc Of Height 100-150 Cm. Csi No. 19.11 ( A ) ( As Per Old Schedule 2020-21 ) 110 Same In Item No. 19.11 ( A ) Above But For ( B ) Cassia Fistula ( Amaltash ) / Delonix Regia ( Gulmouhar ) / Bauhina Purpurea ( Kachnaar ) / Mimusops Elengi ( Maulsri ) / Shisham / Neem Etc. Of Height 100-150 Cm. Csi No. 19.11 ( B ) ( As Per Old Schedule 2020-21 ) 111 Supply & Installation Ofsubmersible Pump Of K.S.B / Calama. Or Eqt. Make Including Cost Of Labour, T&P And Material Required For Completion Of Work. ( B ) 1.5 Hp Outlet 40Mm Dia. Or More, Head 71 / 36, Discharge 2000 / 6000 Lph Csi No. 19.32 ( B ) 112 Same As Item No. 19.32 ( B ) But For ( E ) Three Phase 5 Hp Outlet 50 Mm Dia. Or More, Head 60 / 24, Discharge 9000 / 24000 Lphcsi No. 19.32 ( E ) 113 Same As Item No. 19.32 ( B ) But For ( H ) Three Phase 15 Hp Outlet 80 Mm Dia. Or More, Head 57 / 28, Discharge 30000 / 65000 Lphcsi No. 19.32 ( H ) 114 Supply & Installation Of Electrical Control Panel Of L&T / Havells Or Equivalent Make For Submersible Pump / Pumpset Containing Contractor Relay Condenser. ( B ) For 1.5 / 2 H.P Pump Set Single Phase.Csi No. 19.31 ( B ) 115 Renewing Panes Of 4.8 To 5.7 Mm Glass Including Supply Of Glass With Putty And Brads Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( A ) Glass Of 4 Mm Thick. Csi No. 20.04 ( B ) 116 Cleaning Of Septic Tank Including Disposal Of Waste Out Side The Uppcl Area As Per Direction Of The Engineer-In-Charge Including Cost Of All Labour, T&P Etc.Required For Proper Completion Of The Work. Csi No. 20.12 117 Same As In Item No.20.12 Above But For Inspection Chamber.Csi No. 20.13 118 Cleaning Of Main Drain Or Width More Than 300 Mm.Including Disposal Of Waste Refuses Sludge Out Side The BoardS Area Including Washing And Cleaning By Clean Water Completely As Per Direction Of The Engineer-In-Charge Including Cost Of All Labour, T&P Etc.Required For Proper Completion Of The Work. Csi No. 20.14 119 Same As Above In Item No. 20.14 But For Drain Of Width Less Than 300 Mm. Csi No. 20.15 120 Supply And Replacing Of Following Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete.Csi No. 20.17 ( A ) 121 Same As Item No. 20.17 ( A ) Above But For ( B ) Tower Bolts 10 Mm Dia X 250 Mm Long.Csi No. 20.17 ( B ) 122 Same As Item No. 20.17 ( A ) Above But For ( D ) Iron Hinges 100 Mm Size.12 Gauge.Thick.Csi No. 20.17 ( D ) 123 Same As Item No. 20.17 ( A ) Above But For ( F ) M.S.Handles 100 Mm Size.Csi No. 20.17 ( F ) 124 Leveling And Dressing Of Land By Cuttingfilling And Upto 150 Mm. Depth Complete With All Labour, T&P Etc. Required For Proper Completion Of The Work.Csi No. 20.18 125 Cleaning And Opening Of Chocked W.C. / Bath / Kithchen Pipe Line Including Opening And Refixing Of Chamber Cover Including Washing Etc. Complete. ( Analysis Based On Nbo - 11 25.020. Csi No. 20.19 126 Opening, Cleaning, Overhauling, Oiling And Greasing Of Defective Rolling Shutter And Also Re Setting Of Its Springs For Its Smooth Functioning Including Cost Of All Materials, Labour And T&P Etc. ( Approx. Size Of Shutter 2X2.5 ) . Csi No. 20.20 127 Polishing Of Marble Floor By Cleaning With Carborandum Stone After Washing With Tartre Cleaning Powder Etc. And Finally With French Mansion Polish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 20.22 128 Extraction Of Defective Vt Submersible Pumps And Motor With 60 X 90 Column Pipe And Then Lowering Of The Repaired Pump And Motor With Pipe And Testing The Same Including Checking Main Cut-Out Fuse And Operation Of Tube Well For 24 Hours Fo Rits Smooth Working With All Cost Of Materials, Labour And T&P Etc Required For The Proper Completion Of The Work.Csi No. 20.28 129 Supply And Mixing Bleaching Powder In Over Head Tank As Required Or As Directed By Engineer - In - Charge.Csi No. 20.29 130 Dismantling And Resoling Brick On Edge / Interlocking Tile Floor With Existing Old Bricks / Tile Laid Dry Joints Filled With Sand Including Preparation Of Base To Proper Slope And Camber, Its Ramming Including Supply Of Labour, T&P Etc. ( Labour Only ) Csi No. 22.03 ( As Per Old Schedule 2020-21 ) 131 Supply And Laying 1.5Sq.Mm Gauge Copper Wire Of Plaza Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete.Csi No. 22.06 ( A ) 132 Supply And Laying 2.5Sq.Mm Gauge Copper Wire Of Plaza Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete.Csi No. 22.06 ( B ) 133 Supply And Laying 4.0Sq.Mm Gauge Copper Wire Of Plaza Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete.Csi No. 22.06 ( C ) 134 Supply And Laying 6.0Sq.Mm Gauge Copper Wire Of Plaza Orequivalent Make Of Approved Quality Including Connecting Withexisting Wiring In Existingp.V.C.Pipe. Including Allmaterials, Labour And T&P Complete.Csi No. 22.06 ( D ) 135 Rewinding Of Burnt Ceiling Fan With Approved Copper Wire Including Cost Of All Materials, Labour And T&P Etc. Complete ( Burnt Wirewill Not Be Taken Back. ) . Csi No. 22.08 136 Providing And Fixing 12 Mm Thick Shuttering Ply By Replacing Of Panels Including Detaching The Shutters, Opening Out And Separating The Frame Members And Panels And Including Reassembling The Shutter In Part And Again Re Fixing The Shutter Including Cost Of All Material, Labour And T&P Etc. Required For Proper Completion Of The Work. Csi No. 22.09 ( As Per Old Schedule 2020-21 ) 137 Replacing And Fixing New Galvanized Mosquito Proof Heavy Quality Iron Wire Mesh ( 16×24 ) Gauge Over Door / Window With Old Beading And Including Supply And Fixing Necessary Screws / Nails And All Material, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 22.10 ( As Per Old Schedule 2020-21 ) 138 Painting And Printing House Number On Residence In Circle Of Size 200 Mm Dia Including Preparation Of Base With Enamel Paint Complete As Directed By E / I Including Cost Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. Csi No. 22.17 ( As Per Old Schedule 2020-21 ) 139 Printing Name And Designation Of Occupants In A Plate Of Size ( 200×150 ) Mm Dia Including Preparation Of The Base With Best Quality Synthetic Enamel Paint As Directed By E / I Including Cost Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work.Csi No. 22.18 ( As Per Old Schedule 2020-21 ) 140 Supply And Sprinkling Of Lime In All Drains Of Colony And Waterlogged Area Including Cost Of All Labour, Materials, And T&P Etc, As Required For Proper Completion Of The Work.Csi No. 22.19 141 Cleaning And Sweeping Of Roof Of Residence As And When Requiredincluding Uprooting Of Rank Vegetation And Disposal Of Thegarbage Upto 50 M. Csi No. 22.20 142 Cleaning Of Roads And Their Side Patteries Includingsweeping, Removing Garbage And Vegetation From Patteries, If Anyand And Its Disposal To Dust Bins. Csi No. 22.21 143 S / Rstep Type Of Regulator For Ceiling Fan Of Gecor Equivalent Make Of Approved Quality Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Work.Csi No. 22.60 ( B ) ( As Per Old Schedule 2020-21 ) 144 S / R Of Element Of Geyser 1500 Watts 250 Volt Including Taking Out Damage Element And Refitting And Testing Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Work.Csi No. 22.65 ( As Per Old Schedule 2020-21 ) 145 Operation Of Tube Well By A Suitable Experienced Operator Continuously Or In Different Intervals As Per Schedule Fixed By E / I Including Opening And Closing Valves, Greasing Of Motor, Changing Of Fuse Wire Etc. As Required For Proper Running Of Tube Well. Csi No. 22.69 ( As Per Old Schedule 2020-21 ) 146 Repair Of Starter For 10 H.P. To 25 H.P. Electric Motor Including Its Disconnection And Opening Out, Checking & Changing Of Its, Coil, Minor Parts Such As Nuts, Screws, Washers, Damaged Contacts, Etc, And Its Perfect Setting, Re Fixing And Testing For Its Smooth And Normal Working Etc, Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Work. Csi No. 22.73 ( As Per Old Schedule 2020-21 ) 147 S / R Of 10 Sqm Pvc Flat 3 Core Cable Suitable Up To 25 Hp Submerssible Motor Of Finolex / Atlas Or Equivalent Make Of Approved Quality Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Workcsi No. 22.91 ( As Per Old Schedule 2020-21 ) 148 S / R 63 Amp, 415 Volt Of Isi Mark Rewireable Switch Porciline Fuse Unit ( Cut Out ) Ofssk Or Equivalent Make Including Removing Of Old Unit And Reconnection, Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Work. Csi No. 22.93 ( B ) ( As Per Old Schedule 2020-21 ) 149 S / R Of Set Of Main Contact Of Starter Up To 25 Hp Motor L&T Make Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Work. Csi No. 22.95 ( As Per Old Schedule 2020-21 ) 150 Hiring Charge Of Welding Machine For 8 Hours Service In A Day Or Part As Per Requirement For Attending Miner Type Welding Work As And Where Required As Per Direction Of E / I. Csi No. 22.101 ( As Per Old Schedule 2020-21 ) 151 Providing Hard Rubber Beading At Bottom Of Door Covered With Aluminium Strips For Restoration Of Air Conditioning And Prolection From Rats Etc, As Per Direction Of Engineer In Charge Including Cost Of Materials Labour And T&P Etc, Required For Proper Completion Of Work.Csi No. 22.108 ( As Per Old Schedule 2020-21 ) 152 S / F Of 24 Gauge Aluminium Sheet Of Approved Quality Including Cutting, Wastage, Fixing The Same Over Wooden Door Shutters By Nails Including Cost Of All Materials, Labour And T&P Etc.Csi No. 22.113 ( As Per Old Schedule 2020-21 ) 153 Opening Of Aluminium Door Shutters And Refixing The Same After Replacement Of New Rubber Beading And Screws Complete Excluding Cost Of Al, Pipe And Glass But Including Cost Rubber Beading And Screws. Cost Including All Labour, Materials And T&P Etc, Required For Proper Completion Of Work.Csi No. 22.116 ( As Per Old Schedule 2020-21 ) 154 Maintenance Of Seasonal Flower Bed Including Digging The Earth Inbed ( Minimum Depth Of Bed 30 Cm ) As Per Necessity Whenevernecessary During Replantation, Plantation Of Seasonal Flower, Manuring, Watering, Mixing Of Manure With Earth Uprooting The Expired Plants After Its Expiry And Replacement Of The New Seasonal Plants Like Its Seeds Including Cost Of Chaukidar, Work Assistant And Miss. Works As Per Directed By Engg-In-Charge ( Cost Of Manure, Good Earth And Sand Mixture And Its Spreading Shall Be Paidseparately ) And Including Fertilizers, Pesticides And Medicines Etc Complete. Csi No. 23.03 ( A ) 155 Same As Item No.23.03 ( A ) But For Permanentplants. Csi No. 23.03 ( B ) 156 Supply And Stacking Of Compost Manure At Site Including Carriageupto 3 Km ( Manure Measured In Stacks Will Be Reduced By 8% Forpayment ) . Csi No. 23.04 157 Supply And Plantation Of Approved 2 Years Old Plants Duly Plantedin Earthen Gamla Of Approximate Size 300X 300 Mm Nominal Size, Filled With Compost Manure And Sand Mixed In Approved Proportionincluding Cost Of Approved Quality Earthen Gamla, Compost Manure, Sand All Other Materials, Labour And T&P Etc Reqd. For Proper Completion Of Work. Csi No. 23.08 158 Supply And Planting Seasonal Flower Plants Such As Genda, Rose, Ostar, Flox, Guldawadi, Gulmehndi, Cochia Etc. Including Digging Hole Of Proper Size, Manure And Treatment With Proper Chemical Etc., Including Cost Of Fertilizer, Manure, All Materials, Labour And T&P Etc Complete In Allrespects. Csi No. 23.10 159 Supply And Planting Permanent Ornamental Plant Like Croten, Varil Pristal, Glodulus, Lily, Fern, Bogenbelia Etc. Including Cost Of Plants, Manure, Pesticides, Fertilizer, Labour And T&P Etc Complete Also Including Preparation Of Flower Bed. Csi No. 23.11 160 Supply And Plantingashoka, Pendula, Mango, Neem, Peepal, Sheesham Etc In Pits Including Cost Of All Materials, Labour And T&P Etc Complete In All Respects. ( Cost Of Digging Pitshall Be Paid Separetely As Per Item No. 23.08 ) . Csi No. 23.12 161 Supply And Planting Of Garden Grass ( Australian ) . Including Cost Of Plants, Manure, Pesticides, Fertilizer, Labour And T&P Etc Complete Also Including Preparation Of Bed. Csi No. 23.14 162 Arranging One Mali For Maintenance Of Lawn & Plants, Including Cost Of Mali, Required T&P And Other Miscellaneous Work As Per Direction Of Engineer I / C.Csi No. 23.15 163 Hedge Plantation In A Row Distance Between Two Hedge 15 To 25 Cm Including Digging Hole 6” To 12” , Manure And Treatment With Proper Chemical Etc., Including Cost Of All Materials, Labour And T&P Etc Complete In All Respects.Csi No. 23.16 164 Wiring Point For Light With 1.5 Sq. Mm. Fr Pvc Insulated Multistrand Single Copper Conductor Cable In Pvc Conduit Pipe Concealed In The Wall, 14 Swg Copper Pvc Coated Earth Continuity Wire, And Approved Quality, Piano Type Switch Ceiling Rose / Angle / Batten Holder As Per Approved Sample On 3Mm Thick Phenolic Laminated Bakelite Sheet Etc. Of Matching Shade With Wall Colour Complete In All Respect. Psi No. 121 ( B ) 165 Wiring Point For Fan / Fresh Air Fan ( Light Duty Exhaust Fan ) 1.5 Sq. Mm Fr Pvc Insulated Multistrand Single Core Copper Conductor Cable Pvc Conduit Pipe Concealed In The Wall, 14 Swg Copperearth Continuity Wire And Approved Quality, Piano Type Switch & Ceiling Rose As Per Approved Sample On 3Mm Thick Phenolic Laminated Backelite Sheet Etc. Of Matching Shade With Wall Colour Complete In All Respects As Per Direction Of E / I. Psi No. 123 ( B ) 166 Wiring Point For Plug With 1.5 Sq. Mm Fr Pvc Insulated Multistrand Single Core Copper Conductor Cable In Pvc Conduit Pipe Concealed In The Wall 14 Swg Copper Earth Continuity Wire And Approved Quality Type Switch And Socket As Per Approved Sample Etc. Of Matching Shade With Wall Colour Complete In All Repects As Per Direction Of E / Ipsi No. 124 ( B ) 167 Supply And Burring Of Safe Earthing Electrode T-39 Cu Copper Coated, Length 2000Mm Outer Pipe 76.3Mmx3.2 Inner Pipe 42.4Mm X2.6Mm Terminal Dia 12Mm, Coating 80-100 Micron Filled With Crystalline Property With 50 Kgs Activated Soil ( Bfc ) Capable Of Reducing The Soil Resistivity With Good Mixture Of Retaining Capacity Along With 30Cm Squre C.I. Frame With Hinged Cover & Massory Housing. ( From Electrode Terminal To Switch Board, Cost Of 25X3 Copper Strip Will Be Extra.Psi No. 727 ( C ) 168 Supply And Fixing Of Power Plug With 15A / 240V V Flush Type Switch And 5 Pin 15A / 250V Flush Type Universal Socket In Suitable M.S. Box Of 175Mmx 100Mmx50mm Size With Phenolic Laminated Bakelite Sheet Cover 3Mm Thick Fixed With Brass Machine Screw And Cup Washer.Csi No. 21.20 ( As Per Old Schedule 2020-21 ) 169 S / R Of Bakelite Angle Holder Of Ssk Or Equivalent Make Of Approved Quality Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Work. Csi No. 22.51 ( As Per Old Schedule 2020-21 ) 170 S / R Of Piano Type Switch 6 Amp 250 Volt Of Havells Or Equivalent Make Of Approved Quality Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Work. ( A ) Without Framecsi No. 22.52 ( A ) ( As Per Old Schedule 2020-21 ) 171 S / R Socket 2 / 3 Pin 6 Amp 250 Volt Of Havells Or Equivalent Make Of Approved Quality By E / I. Including Cost Of All Labour Material, T&P Etc. Required For Proper Completion Of The Work. ( A ) Without Frame Csi No. 22.53 ( A ) ( As Per Old Schedule 2020-21 ) 172 Add Extra For Using 12Mm Long C.P. Brass Heavy Quality 15 Mm Dia Extension Nipple For Bib / Stop Cock Etc Complete. Csi No. 24.27 ( A ) ( As Per Old Schedule 2020-21 ) 173 Providing And Fixing 80 / 100 Mm Dia C.I. D-Jonit With Ring Rubber Packing Nut, Bolt And Washer Etc. Complete As Per Direction Of E / I. Csi No. 24.50 ( As Per Old Schedule 2020-21 ) 174 Providing And Fixing Jet With Pipe Heavy Quality Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 24.54 ( As Per Old Schedule 2020-21 ) 175 Providing And Fixing Glass Shelf 7 / 32” ( 5.50Mm ) Thick Of 600 Mm × 130 Mm Size With C.P. Brass Guard Rail Of Standard Size And Brackets Fixed To Wooden Cleats With C.P. Brass Screws Including Supply Of All Materials, Labourand T&P Etc. Required For Proper Completion Of Work .Csi No. 25.22 ( As Per Old Schedule 2020-21 ) 176 Providing And Fixing 15 Mm Dia B-Class Jindal, Jtc, Isi Marked G.I. Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete.Csi No. 26.01 ( A ) 177 Same As Item No. 26.01 ( A ) But For 20 Mm Dia.Csi No. 26.01 ( B ) 178 Same As Item No. 26.01 ( A ) But For 25 Mm Dia.Csi No. 26.01 ( C ) 179 Same As Item No. 26.01 ( A ) But For 32 Mm Dia.Csi No. 26.01 ( D ) 180 Same As Item No. 26.01 ( A ) But For 40 Mm Dia.Csi No. 26.01 ( E ) 181 Same As Item No. 26.01 ( A ) But For 100 Mm Dia.Csi No. 26.01 ( I ) 182 Providing & Fixing Half Turn 15Mm Dia Gate Valve, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.05 ( A ) 183 Providing & Fixing Half Turn 20Mm Dia Gate Valve, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work.Csi No. 26.05 ( B ) 184 Providing And Fixing Pvc Ball Float Valve 15 Mm Dia. With Brass & Union Complete, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.06 ( A ) 185 Providing And Fixing Pvc Connection Pipe, 450X15 With 2 Brass Units Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work.Csi No. 26.09 ( B ) 186 P / F Gi Unions Nominal Bore 15 Mm, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.10 ( A ) 187 P / F Gi Unions 20 Mm Nominal Bore, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work.Csi No. 26.10 ( B ) 188 Supply And Fixing Of Syntex Or Equivalent Make Water Storage Tank Including All Materials, Labours, T&P Etc Required For Proper Completion Of Work. Csi No. 26.12 189 Providing A.C. Box With Mcb, Anchor / Havells Or Equivalent Make As Per Direction Of E / I.Csi No. 26.13 ( As Per Old Schedule 2020-21 ) 190 P / Fbrass Bib Cock, 15 Mm Dia ( 400 Gsm ) Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.13 ( A ) 191 Same As Item No. 26.13 ( A ) But For Supply And Fixing Of 15 Mm Dia Ci / Pvc Bib Cock Including Replacing Of Old Bibcock Complete. Csi No. 26.13 ( C ) 192 Providing & Installation Of 5Kva Voltage Stablizer Of ( 110V-280V ) Rating With Copper Wiring Of Blue Bird Or Its Equivalent Price Brand.The Rate Are Inclusive Of Cartage, Manpower, T&P Etc Required To Complete The Work In All Respect.Csi No. 26.16 ( As Per Old Schedule 2020-21 ) 193 Providing And Fixing Cp Brass Bib Cock15 Mm Dia. Heavy Quality ( 400Gm ) ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.16 ( A ) 194 Providing And Fixing Cp Brass Shower Heavy Quality ( > 225 Gms ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.16 ( E ) 195 Providing And Fixing Cp Brass Wash Basin Mixer Heavy Quality ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.16 ( F ) 196 Providing And Fixingcp Brass Wall Mixerheavy Quality ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.16 ( G ) 197 Providing And Fixingc.P.Brass Telephonic Shower Heavy Quality ( L & K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.16 ( H ) 198 Providing And Fixingcp Brass Angle Valve Heavy Quality ( L&K Or Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.16 ( I ) 199 Providing And Fixingcp Brass Piller Cock Heavy Quality ( L&K Or Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.16 ( J ) 200 Providing And Fixingconcealed Stop Cock Heavy Quality ( L&K Or Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. Csi No. 26.16 ( K ) 201 Providing And Fixing Of 110 Mm Dia Pvc Pipe 6 Kg / Sq.Cm Forwith Special Such As Tee, Bend, Socket, Elbow Etc Including Supply Of All Labour, Material, T & P Etc Complete Required For Proper Completion Of Work.Csi No. 26.17 202 Providing And Fixing 15 Mm Dia Isi Approved Cpvcpipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. Csi No. 26.19 203 Providing And Fixing 20 Mm Dia Isi Approved Cpvcpipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. Csi No. 26.20 204 Providing And Fixing 25 Mm Dia Isi Approved Cpvcpipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. Csi No. 26.21 205 S / F High Tensile Steel Colour Coated Anti Rust, High Temp Resistant Sheet With Tensile Strength 550 Pma Hot Dip Metallic ( Zinc Aluminium ) Alloy ( Zn-55% ) Al, ( 45% ) Coating 70 Gsm With Total Thickness Not Less Than 0.50 Mm ( Tct ) Durashine Or Equivalent Make With Necessary Over Lops Incl S / F Galvamized J / V Hook With Bolts, Nuts, Washer And Bitumen Washers Etc. Incl, Cost Of Material, Labour T&P Etcincluding Cost Of Material, Labour T&P Etc, Required For Proper Completion Of Work As Per Direction Of E / I Confirming A.S. 1397:199. Csi No. 26.60 ( As Per Old Schedule 2020-21 ) 206 Providing And Fixing First Quality White Glazed Orissa Pattern W.C.Pan Hindustan, Cera Make. Size 580 Mm. ( Hindustan, Cera Make ) With Out P Trapincluding Supply Of All Materials, Labour And T&P Etc.Complete.Csi No. 27.01 207 Same As In Item No. 27.01 But Of European Type. Csi No. 27.02 208 Providing And Fixing Plastic Seat Covercomplete With Plastic Lid For European Type Wc Isi Markedincluding Supply Of All Materials, Labour And T&P Etc.Complete. Csi No. 27.04 209 Providing And Fixing Flat Back 430X370x340 Mm . Size Lipped Front Urinal Basin Of White Glazed Earthern Ware First Quality ( Hindutan, Neycer Make ) I.S.I. Marked Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Csi No. 27.06 210 Providing And Fixing 550X400 Mm Wash Hand Basin Of White Glazed Earthern Ware First Quality I.S.I. Marked ( Hindustan, Neycer / Cera Make ) Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Csi No. 27.08 211 Same As In Item 27.08 Above But When Wash Hand Basin Of Size 450X300 Mm Size Is Used. .Csi No. 27.10 212 Providing And Fixing 10 Litres Low Level Pvc Flushing Cistern, Complete With All Fittings Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 27.12 213 Providing And Fixing In Position 32 Mm. Dia P.V.C. Flush Pipe. For W.C. With Unions, Bends Etc. Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. Csi No. 27.13 214 Providing And Fixing In Position 32 Mm. Dia P.V.C.Waste Pipe For Wash Basin. Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. Csi No. 27.14 215 Providing And Fixing 600 Mm X 450 Mm Beveled Edge Mirror Of Atul, Kiran Makeglass With Indian Polish 6.50 Mm Thick Complete With Back Of 600 Mm X 450 Mm X 6 Mm Hard Board Sheet Fixed To Wooden Cieats With C.P. Brass Screws And Washers Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work.Csi No. 27.15 216 Providing And Fixing 750 Mm X 20 Mm Size C.P. Brass Towel Rail Of Approved Qualityincluding Bracketsincluding Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work And Cutting And Making Good The Wall Plaster Etc. Required For Work.Csi No. 27.16 217 Providing And Fixing Soap Dish Chromium Plated With Brackets Fixed To Wooden Cleats With Brass Screws Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work.Csi No. 27.19 218 Supply And Fixing 100 Mm.Pvc Trap India Make Of Heavy Approved Quality Complete With Ci Grating, Includingsupply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Csi No. 27.21 ( B ) 219 Providing And Fixing 100 Mm Dia White Glazed P Or S Trap Including Cement Concrete And All Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work. ( For W.C. ) .Csi No. 27.23 220 Providing And Fixing Stainless Steel Sink 610X450x200 Mm Heavy Quality ( Isi Marked ) Includingall Materials, Labour Cartage T&P Etc.Required For Proper Completion Of The Work.Csi No. 27.26 221 Providing And Laying75 Mm Dia.Swr, Pvc ( Finolex Or Equivalent ) Pipe Including Cost Of Excavation, C.C Etc Including Its Jointing And Connection, All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.Csi No. 27.29 ( A ) 222 Same As In Item 27.29 ( A ) Above But For 90 Mm Dia.Csi No. 27.29 ( B ) 223 Same As In Item 27.29 ( A ) Above But For 110 Mm Dia.Csi No. 27.29 ( C ) 224 Providing Edge Moulding To 18 Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Granite Work.Csi No. 28.19 225 Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : ( A ) First Layer Of Slurry Of Cement @ 0.488 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. ( B ) Second Layer Of Slurry Of Cement @ 0.242 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. Csi No. 28.26 226 Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: ( A ) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg / Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Including Adjoining Walls Upto 300 Mm Height Including Cleaning The Surface Before Treatment. ( B ) Laying Brick Bats With Mortar Using Broken Bricks / Brick Bats 25 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 ( 1 Cement : 5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 ( 1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. ( C ) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg / Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge. ( D ) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 ( 1 Cement :4 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep. ( E ) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.“All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge :With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm. Csi No. 28.28 227 Providing And Fixing False Ceiling At All Heights With Integral Densifiedr Armstrong False Ceiling Tiles Of Size 595X595 X12 Mm Of Approved Texture, Design And Patterns Having Nrc ( Noise Reduction Coefficient ) Of 0.50 ( Minimum ) As Per Is 8225:1987, Light Reflectance Of 85% ( Minimum ) . Non Combustible As Per Bs:476 ( Part-4 ) , Fire Performance As Perbs:476 ( Part 6 &7 ) , Humidity Resistance Of 100%, Thermal Conductivity < 0.043 W / M K As Per Astm 518:1991, In True Horizontal Level Suspended On Interlocking Metal Powder Coated T-Grid Of Hot Dipped Galvanised Iron Section Of 0.40 Mm Thick On Silhouette Profile, Rotary Stiched Double Webbed White With 6 Sub Head : 26- New Technologies And Materials 1632 Mm Reveal Profilewhite / Black ) , Comprising Of Main-T Runners Of Size 15X42 Mm Of Length 3000 Mm, Cross - T Of Size 15X42 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 15X42 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items ( Galvanizing @ 80 Grams Per Sqm ) I.E. 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 22X19x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In- Charge. 26.23.1 With 12 Mm Thick Armstrong Miniralfobre Sound Absorbing Sheetcsi No. 28.30 228 Providing And Fixingacp In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Acpof 4.0 Mm Thickness. Csi No. 28.31 229 Supply And Fixing Of 5 Blade Exhaust Fan Ventile Air Dx 225 Mm Of Havellsor Equivalent Make Including All Material, T&P Etc Required For Proper Completion Of Work As Approved By Engineer In Charge.Csi No. 28.38 230 Rewinding Of 15 H.P Sub- Merssiblemotor With 2.10Sqmm. Pvc Insulated Copper Wire Of Finolex Or Equivalent Make As Per Approved Sample Including Cost Of Winding Wire And Pvc Insulated Sheet Etc, Including Dismantling Of Sub- Mersible Motor From Pump And Column Pipe And Taking Out Burnt Copper Wire From Its Slots And Cleaning Of Slots With Sand Paper And Rewinding Including Cost Of Its Testing Up To 24 Hrs And Guarantee For 6 Months For Its Smooth And Normal Working Including All Cost Of Material, Labour And T&P Etc, Required For Proper Completion Of Work. ( Burnt Copper Wire Cost Is Adjusted In Given Rate And Shall Be The Properly Of Contractor.Nsi 231 P / F Openable Steel Glazed Windows And Ventilators Of Standard Rolled Z Section Conforming To Is 7452 1974 And Welded With ( 100×20×5 ) Mm Holdfast Embedded In C.C. Block ( 23×11.5×7.5 ) Cm Size Of 1:2:4 Proportion Of Cement, Coarse Sand, & 20Mm Graded Stone Ballast As Per Drawing Etc. Complete But Excluding S / F Of Glass Panes Of 4Mm Thick With Nuts Glazing Clips With Special Putty Of Approved Make Etc. The Fabrication Should Conform To Is 1038 1975. Including Cost Of All Materials, Labour & T&P Etc. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 232 Same As Item No. 230 Abovebut For Fixed Portion. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 233 Providing And Fixing Ist Qaulity One Piece European Type White Glazed Floor Mounted Seat Isi Maked Size 695X385x700mm As Per Approved Sample Including 10 Lit Capacity White Glazed Seat Mounted Air Pressure With Flushing Cistern Plastic Seat Cover With Plastic Lid C.P Brass Hings And Rubber Buffers With 15Mm Dia Pvc Connection 600Mm Long Including Supply All Material Labour T&P Etc Required For Proper Completion Of The Work. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 234 Supply And Fixing Ist Quality Cera Make White Glazed Wash Hand Basin With Pedestal Size ( 650X515x240 ) Mm Including Its Fixing With All Labour & T&P Etc. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 235 Supply And Fixing Ist Quality Jaguar Make 15Mm Dia C.P Brass Central Hole Basin Sensor Faucet ( Model No. 51011 ) Battery Oprated Includingits Fixing With All Labour & T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 236 S / F Best Quality Bamboo Stick Incl. With Iron Wire And Fixing Through Fastener Incl. All Labour T&P Etc. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 237 Finishing Of Walls With Three Coats Water Proof Exterior Emulsion Paint “Ace” “Out Look” Or Equivalent Make On New Work Including One Priming Coat ( 1 Liter Paint Diluted Including 0.75 Liter Of Water ) To Give An Even Shade Complete Including Cost Of All Materials, Labour And T&P Etc, As Per Direction Of E / I. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 238 Two Coat Of Ace On Previously Old Treated Surface On Exterior Walls. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 239 Change Thermo State And Element In Havells 11 Fin Electric Oil Filled Radiator Room Heater 2900 W With All Labour & T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 240 S / R Of Brass Spendil With Washer Of Approved Quality And Make For Bib / Stop / Pillar Cock. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 241 S / R Of Syphone System Of Pvc Cistern Including All Material, Labour And T&P Etc. Complete. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 242 S / R Of Pvc Tank Cover Of 500 200 Liter Tank Including Locking Arrangement Etc. Complete. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 243 S / F Of Pvc Handle Of Pvc Cistern Of Approved Quality Etc. Including All Material, Labour And T&P Etc. Complete. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 244 Supply And Fixing 1200Mm Size Sweepceiling Fan ( G.E.C. / Polar / Crompton / Usha Or Equivalent Approved Make ) With Double Ball Bearing, Step Type Electronic Regulator, Necessary Wire And 900 Mm Long Hanging Rod With Double Canopy Etc. Including Testing And Commissioning As Per Direction Of Engineer-In-Charge. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 245 S / F Soap Dispenser Make Ist Quality Transparent Vessel And C.P. Brass Nozel Use For Filling Hand Wash Liquid Including Fixing. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 246 P / F 3Mm Thick Fiber Sheet Including Its Cutting And Fixing. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 247 Supply And Fixing Ist Qualty Door Loock Rectangular And Round Shape Including Its Fixing. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 248 Supply And Fixing Stainless Steel Plate Robe Hook, 8 Long Including Its Fixing.Nsi 249 Hiring Charges Of Hydra Machine With Fuel & Driver For Lifting, Removing & Disposal At Proper Place Of Fallen Huge Trees In Campus At Hydel Colony Victoria Park, Meerut Including All Labour & T&P Etc Required For Completion Of Work As Instructedby E / I. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 250 Supply & Fixing 1.5 H.P. Submersible Starter Contact Relay Including Its Fixing. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 251 Supply & Fixing 15Mm Dia P.V.C. Flexible Pipe For Uses In Garden & Plants Water Supply. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 252 Supply & Fixing 20Mm Dia P.V.C. Flexible Pipe For Uses In Garden & Plants Water Supply. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 253 Providing And Lowering Of 50Mm Dia P.V.C. Flexible Pipe Make With Coupling Socket Etc Including Cutting The Pipe Of Required Length And Fixing Including Cost Of All Materials Labour And T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 254 Service Of 15 Kva Generator Including Changing All Filters, Oil, Petty Parts With All Labour & T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 255 Supply And Fixing 2Mm Thick Transparent Polythene Heavy Quality Including Its Cutting Of Required Size And Fixing With 25Mm Long Metro Screw With All Labour And T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 256 Supply And Fixing M.S 16Mm Dia 150Mlong Anchor Bolt Fixing With Hammer Drill Machine With All Labour And T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 257 Supply And Harrison Cx-3000-0557 Stainless Steel 11 Leaves Pad Lock With 3 Key. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 258 Supply Of Plastic Body 12 Lit Capacity Pedal Dustbin With Removal Garbage Bag. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 259 Supply And Fixing Jaguar Make 5 Lit Capacity Wall Mount Cistern Including Its Fixing With All Labour And T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 260 Supply And Fixing 200Mm Dia 26 Watt Circular Led Light With Adaptor In Lift Including Its Fixing Charge. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 261 Supply And Fixing 15Mm Dia C.P Brass Alton Grace Make 2 In 01 Wall Mixer With 40M Long C.P Brass Extension Pices Including Its Fixing With All Labour And T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 262 Repair Of Grass Cutting Machine Including Motor Binding Supply New Blade, Supply New Condenser With All Labour And T&P. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 263 Supply And Installation Luminous Rc-25000 200 Ah Tubular Battery Including Its Installation Charge. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 264 Supply Of 2000W Bajaj Make Blower With Two Heat Setting And Auto Thermal Cut-Out. ( Rate Already Sanction By Agr. No. 07 / 2020-21 ) Nsi 265 Supply And Fixing Of U.P.V.C 80Mm Dia 11 Kg / Cm2 Coloumn Pipes Aashirvad Make With Coloumn Coupling Socket As Required For Proper Completion Of Work Including All Labour Material &T&P. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 266 Roof Treatment Work With 2Mm Thick Dr. Fixit Urpwith Cement Salary And Fiber Glass Mesh 1Mm Thick Ist Coat Urp And Cement Mixer Ratio ( 1:1.5 ) On Properly Cleaned Roofsurface And Laying Fiber Glass Cloths After Once Again 1Mm Thick 2Nd Coat Urp And Cement Mixer In Ratio ( 1:1.5 ) Including All Labour & T&P. ( Already Sanction By S.E ( C ) Vide Om. No. 779 / Ecdc / Mt / Wt-1 Dt. 01.07.2022 ) Nsi 267 Making & Fixing Flex Board Size ( 5X4 ) With 25Mmx25mm Light Weight Hollow Pipe Frame Including Writting As Per Required Metter With All Labour & T&P. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 268 Supply And Fixing 10Mm Dia Supporting Cable For Support 15 H.P Submersible Pump In Loweringincluding All Labour & T&P. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 269 Supply And Fixing 10Mm Dia Supporting Cable For Support 15 H.P Submersible Pump In Loweringincluding All Labour & T&P. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 270 Supply And Fixing 24 Watt Led Tube Light Phillips, Havells And Equvalent Make Including Its Fixing & T&P. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 271 Supply And Fixing Of Under Water Flood Light, Recess Mounting Suitable For & With 50 Watt Lamp Confirming To Ip 68 Protection Including Its Installation. ( Rate Already Sanction By S.E ( C ) Vide O.M No.-472 / Ecdc / Mt / Wt-1 Dt. 20.04.2022 ) Nsi 272 Supply And Fixing 9 Watt Led Bulb Bajaj, Havells, Phillips & Equivalent Make Of Approved Quality By E / I Including Cost Of All Labour Material & T&P Etc. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 273 Supply And Fixing 15 Amp 250 Volt, Socket Of Havells, Anchor Or Equivalent Make Of Approved Quality By E / I Including Cost Of All Labour Material & T&P Etc. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 274 Supply And Fixing 15 Amp 250 Volt, Socket Of Havells, Anchor Or Equivalent Make Of Approved Quality By E / I Including Cost Of All Labour Material & T&P Etc. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 275 Supply And Fixing Havells Make 63 Amp Four Pole Change Over Including Its Fixing With All Labour & T&P Etc. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 276 Supply And Fixing Door Bell Of Anchor Or Equivalent Make Of Approved Quality By E / I Including Cost Of All Labour Material & T&P Etc. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 277 Supply And Fixing 12 Watt Led Bulb Bajaj, Havells, Phillips Make Of Approved Quality By E / I Including Cost Of All Labour Material & T&P Etc. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 278 Supply And Fixing Acp Sheet Name Plate With Night Refleted Material Including Writing Required Name & Degigration Including Its Fixing. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 279 Supply And Fixing Call Bell Of Anchor Or Equivalent Make Of Approved Quality By E / I Including Cost Of All Labour Material & T&P Etc. ( Rate Already Sanction By Agr. No. 18 / 2022-23 ) Nsi 280 Engaging Of Carpenter For Petty Works Of Site Etc. As Per Direction E / I.Based On. Csi No. 1.10 281 Engaging Of Plumber For Petty Works Of Site Etc. As Per Direction E / I.Based On. Csi No. 1.15 282 Engaging Of Belder / Majdoor For Petty Works Of Site Etc. As Per Direction E / I.Based On. Csi No. 1.20 283 Engaging Of Electrician With Kit For Petty Repair Of Electrical Works, Etc. As Per Direction Of E / Ibased On. Csi No. 1.36 284 Circuit Wiring / Submain Wiring:Circuit Wiring Starting From Distribution Boxto Point Control Box / Switch Box Inpvc ( Heavy ) 25Mm Dia Conduits, Using Accessories Such As Bends, Tees, Saddles, Draw Boxes, Mounting Boxes, Inner Plates, Cover Plates, Ceiling Rose Etc. ( Including Chase Cutting & Filling Of Chase Where Ever Required ) With Pvc Insulated 1100V Grade Fr Multi-Stranded Copper Conductor Wire ( Color Code To Be Used ) . Identification Ferrules At Both End To Be Provided.Circuit Wiring Using 2 Runs Of 2.5 Sq.Mm+ 1 Run Of 1.5Sqmm Pvc Insulated Copper Wire Drawn In25mm Dia 2 Mm Thick Pvc Conduits As Lighting Circuits Being Reckoned From Distribution Board To First Light / Fan Control Switch Boards Psi No. 1307 ( C ) Up Pwd Sor 2009 285 Circuit Wiring Using 2 Runs Of 4.0 Sq.Mm+ 1 Run Of 2.5 Sqmm Pvc Insulated Copper Wire Drawn In25mm Dia 2 Mm Thick Pvc Conduitspower Circuits Being Reckoned From Distribution Board To First Power Control Switch Boards. ( For Power Points 15 Amp ) Psi No. 221 ( C ) 286 Circuit Wiring Using 2 Runs Of 6.0 Sq.Mm+ 1 Run Of 4.0 Sqmm Pvc Insulated Copper Wire Drawn In25mm Dia 2 Mm Thick Pvc Conduits Aspower Circuits Being Reckoned From Distribution Board To First Power Control Switch Boards. ( For A.C. ) Psi No. 222 ( C ) 287 Supply And Wiring Of Submain With Two Number 10 Sqmm Pvc Insulated 1100 V Grade Single Core Aluminium Conductor Cable In 25Mm Dia Heavy Guage Rigid Steel Conduit Partly Concealed In Wall And Partly Laid In Slab Along With Reinforcement Before Concerting With One Number 8 Swg Gi Earth Continuity Wire Including Matching Colour Wash Etc Complete In All Respect.Psi No. 123 288 Supply And Fixing 6A To 32A Sp Mcbc Curve- 10 Ka Psi No. 1002 289 D ) 63 Amp. Isolator Psi No. 1005 ( B ) 290 Surface Flush Mounted 8 Ways S.P.N. Distribution Board.Psi No. 1024

INR 3540 /-

INR 16000.0 /-

INR 15.99 Lakhs /-

Name of Work: Half Yearly M&R works of residential Colony at Victoria Park, Meerut for the financial year 2023-24.

Sl. No.	Item Description
1	Excavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.5 Metreand lead upto 30 metreincluding filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation or in to the plinth and removal & disposal of surplus earth as directes by the E/I up to a distance of 30m from the foundation trenches. CSI No. 4.01
2	Clearing jungle including uprooting of rank vegetations,grass, bush,wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. CSI No. 4.08
3	Cleaning of grass and removal of rubbish upto a distance of 50 Moutside the UPPCL area cleaned. CSI No. 4.09
4	Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 kmoutside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. CSI No. 4.10
5	Earth filling in Bulk in open areas including cost of the earth when obtained from outside Corporation’s area including its carriage, loading/unloading, spreading, watering and ramming in 20cm layers and dressing of earth etc. Rates including cost of earth, labour, T&P and ROYALITY of earth etc. required for proper completion of the work.CSI No. 4.11 (As per Old Schedule 2020-21)
6	Providing and injecting chemical emulsion for post constructional anti-termite treatment treatment of soil under existing floors using chemical emulsion @ 1 liter/hole at 300mm interval including drilling 12mm dia holes and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) after filling with chlorpyriphose/lindane E.C. 20% with 1% concentration.CSI No. 4.15 (As per Old Schedule 2020-21)
7	Concrete with 4cm gauge I class brickballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. CSI No. 5.01
8	Concrete with 4cm gaugestone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. CSI No. 5.02
9	Concrete with 4cm gauge I class brickballast, coarse sand ( (F.M. 1.8 to 2.5) and cement in proportion of 10:5:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. CSI No. 5.03
10	Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work.CSI No. 5.06
11	Precast cement concrete door sills, chaukhats boundary posts,shelves and similar small work with cement, approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast in the proportion 1:2:4, excluding reinforcement but including fixing the same in position including cost of all other material, labor and T&P.CSI No. 5.09
12	RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granit, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:2:4in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.CSI No. 5.10
13	RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.CSI No. 5.24
14	RCC work with cement, approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3inlighter beams i.e. having span upto6m, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.CSI No. 5.25
15	RCC work with cement, approved coarse sand (F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in RCC T beam-slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.CSI No. 5.29
16	First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work.CSI No. 6.01
17	1st class brick work in 1:6 C.M. with cement and coarse sand of 2.25 F.M. mortar in super structure including necessary cutting and moulding of brick as required including honey comb brick work, thickness of wall one brick (230mm) thick in super structure. CSI No. 6.01+6.07+6.08
18	Same as item no. 17 above but for wall of half brick 4.5” (115 mm) thick but in 1:6 C.M. with cement and coarse sand of 2.25 F.M. mortar. CSI No. 6.01+6.07+6.09
19	Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. CSI No. 6.18
20	Same as in item 6.18 above butin super structure for 230 mm thick wall. CSI No. 6.19
21	Supply and filling brick bat in soak pit including all labour,material and T&P etc complete. (for 01 soak pit). CSI No. 6.23
22	2.5 cm. thick damp proof course of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand (F.M.1.8 to 2.5), and3 parts approved 12 mm. graded stone grit and also including liquidwater proofing material as approved by the Engineer-Incharge in the proportions specified by the manufacturer.CSI No. 7.02
23	Indian Sal wood wrought framed and fixed including simple, mouldings straight work as in Chaukhats including supply of allmaterials, labour and T&P etc.required for proper completion ofthe work. CSI No. 8.03
24	Country wood wrought framed and fixed including simple, mouldings straight work as in Chaukhats including supply of allmaterials, labour and T&P etc.required for proper completion ofthe work. CSI No. 8.04
25	Additional cost for fixing glass panes with 4.5 cm. thick C.P.Teak wood fully panelledincluding cost of materials, labour andT&Petc. required for proper completion of the work. CSI No. 8.08
26	Supply and fixing Stopper with rubber pad of chromium polished iron fitting with screws for doors and windows etc. CSI No. 8.17 (L) (As per Old Schedule 2020-21)
27	S/F of 25mm dia decorative Curtain rod with decorative and caps, matching curtain rings, including fixing with necessary clamps, PVC gully, steel screws etc. complete.CSI No. 8.19 (As per Old Schedule 2020-21)
28	Providing and fixing 19mm thick ply board/block board for wardrobe shutter etc. of Reliance or Scorpio or equivalent make including teak wood beading around the shutter and including fixing and adjustment of hinges, bolts handle and other fittings but excluding their supply and including cost of all material labour, T&P etc. required forthe proper completion of the work.CSI No. 8.25 (As per Old Schedule 2020-21)
29	Providing and fixing of 25×10mm size tapered shape teak wood beading of approved design and fixing with nails and screw as directed by E/I including cost of all material labour, T&P etc. required forthe proper completion of the work. CSI No. 8.26 (As per Old Schedule 2020-21)
30	Providing and placing 6 mm thick A.C. plain sheet in false ceiling in proper level and alignment complete. CSI No. 8.29 (As per Old Schedule 2020-21)
31	P/Fof 6.0mm thick Water Proof Commercialquality plywood in partition work to make 5x4mm size groove at specified intervals. Ply shall be fixed by means of glue and headless nailsat 100mm c/c complete. Cost including all labour, material,T&P required for proper completion of work. CSI No. 8.30 (As per Old Schedule 2020-21)
32	Supply and fixing of 4.0 cm thick C.P Teak wood door and window Jali shutters withpanels of heavy quality galvanized iron wire mesh of size 14 x 24 withnecessary beading including supply and fixing of wooden cleats and stopsand including fixing and adjustment of hinges. but excluding supply of fixtures. CSI No. 8.37
33	S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of C.P. Teak wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour andT&P etc. required for proper complete. CSI No. 8.43
34	Fixing of Departmental doors & windows shutters including supply& fixing of hinges and other fixtures.(excluding their supply) including all materials,labour & T&P etc. required for proper completion of work.CSI No. 8.51
35	P/F fully Anodized aluminium fixed glazing with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawingincluding providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminiumsections should be 20 microns with a (+) 2 microns tolerance . The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete. CSI No. 8.52
36	Same as above item No. 8.52 but for openable window portion as shown in drawings, including cost of Aluminium hinges and all other fittings like concealed towerbolts handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. CSI No. 8.53
37	S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge.including cost of all other material, labour, tools & plants etc. complete. CSI No. 8.52
38	Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. CSI No. 8.54
39	Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. CSI No. 8.57
40	Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P.CSI No. 8.60
41	Providing and fixing in place a full height storage cabinet 600 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only. CSI No. 8.64 (SOR 22-23)
42	Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.CSI No. 9.01
43	As in item 9.01 above but when steel is to be provided by the department. CSI No. 9.02
44	TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) . CSI No. 9.03
45	Supply and fixing rolling shutter of approved make made of (18×125) mm M.S. laths interlocked through their entire length and joint together at the end by end locks and mounted on specially designed pipe shaft with brackets side guides and arrangement for inside and outside locking with push and pull operation complete but excluding the cost of top cover and spring.CSI No. 9.05(As per Old Schedule 2020-21)
46	Supply and fixing galvanised mosquito proof jali (16x24 gauge) withM.S. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame.CSI No. 9.18
47	P/F in position collapsible steel shutter with vertical channels 20 x 10 x 2 mm.(3/4" x 3/8"x 1/12") and braced with flat iron diagonals 20 x 5 mm.(3/4" x 3/16") size with top and bottom rails of "T"iron 40 x 40 x 6 mm. (1/2" x 1-1/2" x 1/4") with 38 mm dia steel pullys with bolts, nuts, nuts locking arrangement, stoppers, handles complete including applying a priming coat of approved Red oxide paints.CSI No. 9.29
48	P/F Concertina coilfencing with required dia. 600 mm upto 3 M height of wall between existing angle iron ‘Y’ shaped placed 2.4 M or 3.0 M apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete ( No. of rounds will be 7 to 8 in one Meter length) as per direction of Engineer I/C with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick ) wire of high tensile strength of 165 kg/Sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm/meter ( cost of MS angle, C.C. blocks shall be paid separately). CSI No. 9.37
49	Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work.CSI No. 10.01
50	Supply and fixing 6 mm thick grey corrugated asbestos sheet. including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. CSI No. 10.03
51	Supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the Engineer-Incharge including necessary overlap, applying a coat of approved mastic paint below the Tar felt & including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 10.06
52	Providing and Laying polythene sheet of Approved Quality in double layer of Wt. 0.120 Kg/Sqm with 100 mm over lapping along roof slope as per direction of E/I complete.CSI No. 10.08(As per Old Schedule 2020-21)
53	12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand (1:3), minimum thickness not to be less then 10 mm including supply of all materiallabour and T&P etc for proper completion of work. CSI No. 11.06
54	12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. CSI No. 11.07
55	12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. CSI No. 11.09
56	Add for extra labour to all items of plaster if done in ceiling.CSI No. 11.10
57	2 cm. thick cement plaster in dado or skirting in 1:2 consisting of onepart of cement and two parts of approved coarse sand laid inpanels finished with 3mm.floating coat of neat cement or cementand marble dust in ratio of 5:1 including supply of all materials, labour & T&P etc. required for proper completion of the work.CSI No. 11.13
58	Providing (12x15) mm section groove in plasterincluding all material, labour andT&P etc. required for proper completion of the work.CSI No. 11.16
59	Making drip coarse (25x12) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and T&P etc requiredfor proper completion of work. CSI No. 11.19
60	3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.). CSI No. 11.20
61	2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. CSI No. 12.02
62	4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC. CSI No. 12.04
63	First class bricks on edge floor laid dry, joints sand filled,including preparation of base to proper slope and its rammingincluding supply of all material labour & T&P etc. required forproper completion of the work. CSI No. 12.07
64	Same as in item 12.07 above but bricks laid flat.CSI No. 12.08
65	Supply and Laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and T&P etc. completion required for proper completion of the work.CSI No. 12.12
66	Providing and fixing glass strips of 3.15 mm thickness & 25mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc.required for proper completion of work. CSI No. 12.13
67	Providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& T&P etc. required for proper completion of work.CSI No. 12.14
68	Providing and fixing 18mm thick polished BARODA GREEN Stone of approved shade and pattern in floor or on top of Kitchen slab etc. laid with 1:3 cement and coarse sand mortar and jointing with white cement mixed with pigment to match the shade including supply of all material, labour and T&P etc. required for proper completion of work.CSI No. 12.14 (As per Old Schedule 2020-21)
69	Providing and laying18mm. thickKotastonein flooring or skirtingoverbasecementmortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and T&P etc required for proper completion of the work.CSI No. 12.17
70	Providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand (Bell, Johnson or equi. make)size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.CSI No. 12.18
71	Providing and laying of 16 mm thick granite ( black/ brown) inflooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. CSI No. 12.20
72	S/F 10mm thick Group 25 acid resisting tiles of “Somany” or equivalent approved make in flooring or skirting (confirming to I.S. 4457 - 1967) in ordinary Portland cement and coarse sand in ratio 1:3 with the joints filled with acid resistant cement “Accocide” of A.C.C. or equivalent make acid resistant cement and liquid supplied with cement, mixed in 1:3 ratio to make a workable paste in G.I. Tray. The joints should be kept as 5mm and to be cured for 7 days with dilute HCL (One part acid and three parts of water). Rate should be including the cost of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 12.22
73	Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules.CSI No. 12.23
74	Painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint "Luxol" or equivalentbrand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. CSI No. 13.01
75	Same as in item 13.01 above but for every coat after first coat.CSI No. 13.02
76	Same as in item 13.01 above but for every coat on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required, for proper completion of work. CSI No. 13.03
77	One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. CSI No. 13.08
78	Same as in item 13.08 but for every coat after the first coat. CSI No. 13.09
79	Same as in item 13.08 but for every coat on previously old oil bound distemper surface. CSI No. 13.10
80	Applying P.O.P plaster with minimum 6mm to 10mm thick plaster of Paris putty on plastered surface of walls/ceilings for smooth finish including its preparation of surface after applying oil based primer and chalk putty over P.O.P. Rates including cost of all labour, material, T&P etc. required for proper completion of work. CSI No. 13.16 (As per Old Schedule 2020-21)
81	Same as above item no. 13.16but making P.O. P. cornice 100mm×100mm size approved shape and design at junction of ceiling and wall including cost of necessary centering and shuttering P.O.P., its wastage, T&P etc. required for proper completion of work.CSI No. 13.17 (As per Old Schedule 2020-21)
82	Making P.O.P. fan ring/circle on ceiling of room of approved shape and design approved by E/I including cost of all materials, labour T&P complete.CSI No. 13.18 (As per Old Schedule 2020-21)
83	Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. CSI No. 13.20
84	Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work. CSI No. 13.21
85	Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work.CSI No. 13.22
86	Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint. CSI No. 13.23
87	Same as in item 13.22 but for each coat ofAPEX or equivalent brand weather coat paint .on previously treated surface.CSI No. 13.24
88	Spirit polish over new wood work after rubbing down the surface, withsand paper to give smooth and shining surface including cost ofall materials, labour, T&P required for proper completion of thework. CSI No. 13.29
89	Spirit polish over previously polished wood surfaceafter rubbing down the surface, withsand paper to give smooth and shining surface including cost ofall materials, labour, T&P required for proper completion of thework.CSI No. 13.30
90	White washing one coat including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 14.01
91	White washing two coat including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 14.02
92	Colour washing one coat, using approved colouring material and colourincluding supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 14.04
93	Same as in item 14.04 above but for each coat after the first coat. CSI No. 14.05
94	Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metres. CSI No. 15.01
95	Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres. CSI No. 15.03
96	Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. CSI No. 15.05
97	Dismantling doors or window leaves including stacking ofmaterials as directed by the Engineer I/C within a dist. 60 M. CSI No. 15.09
98	Dismantaling doors and windowschowkhatsincluding stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. CSI No. 15.10
99	Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M.CSI No. 15.11
100	Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M.CSI No. 15.12
101	Cleaning of existing W.B.M. surface & laying premix 20mm thick over a tack coat with graded approved grit, heating the paint to the required temperature & mixing either in mixture or hand drums including cartage of mixture or hand drums and, maintenance of side patries and watering them during operation and including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 18.07
102	Same as in item no. 18.07 above but in laying premix 4.0 cm thick.CSI No. 18.08
103	Laying seal coat with 6 mm size graded stone grit and bitumen including heating the bitumen paint to required temperature including cartage and cost of materials, labour, T&P etc. required for propercompletion of work.CSI No. 18.09
104	Boring with 150 mm dia casing pipe to a probable depth of 60 m from ground level with skilled and unskilled labour including all T&P and boring apparatus and supervision charges etc, required for proper completion of the work for submersible pump set.CSI No. 18.41 (As per Old Schedule 2020-21)
105	Extraction of casing pipe 150mm. Dia after completion of lowering of pipe assembly including all labour and T & P etc. complete.CSI No. 18.42 (As per Old Schedule 2020-21)
106	Providing110mm dia Plain PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work.CSI No. 19.08
107	Edging with bricks laid dry lengthwise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth with in a lead of 50 m 75 class designation 1 FPS bricks. CSI No. 19.09 (As per Old Schedule 2020-21)
108	Providing 110mm dia Slotted PVC CASING PIPES (Aroma /Supreme) (Pressure10 Kg./ Sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and T&P required for assembly making and proper completion of work. CSI No. 19.10
109	Supply and plantation of following tree:- (A) Polyalthia pendula (Ashoka Pendula)/Cut sagaun/Ficus etc of height 100-150 cm. CSI No. 19.11 (A) (As per Old Schedule 2020-21)
110	Same in item No. 19.11(A) above but for (B) Cassia fistula (Amaltash)/Delonix regia (Gulmouhar)/Bauhina purpurea (Kachnaar)/Mimusops elengi (maulsri)/Shisham/Neem etc. of height 100-150 cm. CSI No. 19.11 (B) (As per Old Schedule 2020-21)
111	Supply & Installation ofsubmersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (b) 1.5 HP outlet 40mm dia. or more, Head 71/36, Discharge 2000/6000 LPH CSI No. 19.32 (b)
112	Same as item No. 19.32 (b) but for (e) three phase 5 HP outlet 50 mm dia. or more, Head 60/24, Discharge 9000/24000 LPHCSI No. 19.32 (e)
113	Same as item No. 19.32 (b) but for (h) three phase 15 HP outlet 80 mm dia. or more, Head 57/28, Discharge 30000/65000 LPHCSI No. 19.32 (h)
114	Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(b) for 1.5/ 2 H.P pump set single phase.CSI No. 19.31 (b)
115	Renewing panes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 4 mm thick. CSI No. 20.04 (b)
116	Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. CSI No. 20.12
117	Same as in item No.20.12 above but for inspection chamber.CSI No. 20.13
118	Cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the board"s area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. CSI No. 20.14
119	Same as above in item No. 20.14 but for drain of width less than 300 mm. CSI No. 20.15
120	Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete.CSI No. 20.17 (a)
121	Same as item No. 20.17 (a) above but for (b) Tower bolts 10 mm dia x 250 mm long.CSI No. 20.17 (b)
122	Same as item No. 20.17 (a) above but for (d) Iron hinges 100 mm size.12 gauge.thick.CSI No. 20.17 (d)
123	Same as item No. 20.17 (a) above but for (f) M.S.handles 100 mm size.CSI No. 20.17 (f)
124	Leveling and dressing of land by cuttingfilling and upto 150 mm. depth complete with all labour, T&P etc. required for proper completion of the work.CSI No. 20.18
125	Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020. CSI No. 20.19
126	Opening, cleaning, overhauling, oiling and greasing of defective rolling shutter and also re setting of its springs for its smooth functioning including cost of all materials, labour and T&P etc.( Approx. size of shutter 2x2.5). CSI No. 20.20
127	Polishing of marble floor by cleaning with carborandum stone after washing with tartre cleaning powder etc. and finally with French mansion polish including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 20.22
128	Extraction of defective VT submersible pumps and motor with 60" x 90" column pipe and then lowering of the repaired pump and motor with pipe and testing the same including checking main cut-out fuse and operation of Tube well for 24 hours fo rits smooth working with all cost of materials,labour and T&P etc required for the proper completion of the work.CSI No. 20.28
129	Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge.CSI No. 20.29
130	Dismantling and resoling brick on edge/interlocking tile floor with existing old bricks/tile laid dry joints filled with sand including preparation of base to proper slope and camber, its ramming including supply of labour, T&P etc. (Labour only)CSI No. 22.03 (As per Old Schedule 2020-21)
131	Supply and laying 1.5Sq.mm gauge copper wire of "Plaza" orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.CSI No. 22.06 (a)
132	Supply and laying 2.5Sq.mm gauge copper wire of "Plaza" orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.CSI No. 22.06 (b)
133	Supply and laying 4.0Sq.mm gauge copper wire of "Plaza" orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.CSI No. 22.06 (c)
134	Supply and laying 6.0Sq.mm gauge copper wire of "Plaza" orequivalent make of approved quality including connecting withexisting wiring in existingP.V.C.pipe. including allmaterials, labour and T&P complete.CSI No. 22.06 (d)
135	Rewinding of burnt ceiling fan with approved copper wire including cost of all materials, labour and T&P etc. complete (Burnt wirewill not be taken back.). CSI No. 22.08
136	Providing and fixing 12 mm thick shuttering ply by replacing of panels including detaching the shutters, opening out and separating the frame members and panels and including reassembling the shutter in part and again re fixing the shutter including cost of all material, labour and T&P etc. required for proper completion of the work. CSI No. 22.09 (As per Old Schedule 2020-21)
137	Replacing and fixing new galvanized mosquito proof heavy quality iron wire mesh (16×24) gauge over door/window with old beading and including supply and fixing necessary screws/nails and all material, labour and T&P etc. required for proper completion of the work.CSI No. 22.10 (As per Old Schedule 2020-21)
138	Painting and printing house number on residence in circle of size 200 mm dia including preparation of base with enamel paint complete as directed by E/I including cost of all materials, labour and T&P etc. required for proper completion of work. CSI No. 22.17 (As per Old Schedule 2020-21)
139	Printing name and designation of occupants in a plate of size (200×150) mm dia including preparation of the base with best quality synthetic enamel paint as directed by E/I including cost of all materials, labour and T&P etc. required for proper completion of work.CSI No. 22.18 (As per Old Schedule 2020-21)
140	Supply and sprinkling of lime in all drains of colony and waterlogged area including cost of all labour,materials,and T&P etc,as required for proper completion of the work.CSI No. 22.19
141	Cleaning and sweeping of roof of residence as and when requiredincluding uprooting of rank vegetation and disposal of thegarbage upto 50 M. CSI No. 22.20
142	Cleaning of roads and their side patteries includingsweeping,removing garbage and vegetation from patteries, if anyand and its disposal to dust bins. CSI No. 22.21
143	S/Rstep type of regulator for ceiling fan of GECor equivalent make of approved quality including cost of all labour material, T&P etc. required for proper completion of the work.CSI No. 22.60 (b) (As per Old Schedule 2020-21)
144	S/R of element of geyser 1500 watts 250 volt including taking out damage element and refitting and testing including cost of all labour material, T&P etc. required for proper completion of the work.CSI No. 22.65(As per Old Schedule 2020-21)
145	Operation of Tube Well by a suitable experienced operator continuously or in different intervals as per schedule fixed by E/I including opening and closing valves, greasing of motor, changing of fuse wire etc. as required for proper running of Tube well. CSI No. 22.69(As per Old Schedule 2020-21)
146	Repair of starter for 10 H.P. to 25 H.P. electric motor including its disconnection and opening out, checking & changing of its, coil, minor parts such as nuts, screws, washers, damaged contacts, etc, and its perfect setting, re fixing and testing for its smooth and normal working etc, including cost of all labour material, T&P etc. required for proper completion of the work. CSI No. 22.73 (As per Old Schedule 2020-21)
147	S/R of 10 sqm PVC flat 3 core cable suitable up to 25 HP Submerssible motor of Finolex/Atlas or equivalent make of approved quality including cost of all labour material, T&P etc. required for proper completion of the workCSI No. 22.91 (As per Old Schedule 2020-21)
148	S/R 63 Amp, 415 Volt of ISI mark rewireable switch porciline fuse unit (cut out) ofSSK or equivalent make including removing of old unit and reconnection, including cost of all labour material, T&P etc. required for proper completion of the work. CSI No. 22.93 (B) (As per Old Schedule 2020-21)
149	S/R of set of main contact of starter up to 25 HP motor L&T make including cost of all labour material, T&P etc. required for proper completion of the work. CSI No. 22.95(As per Old Schedule 2020-21)
150	Hiring charge of welding machine for 8 hours service in a day or part as per requirement for attending miner type welding work as and where required as per direction of E/I. CSI No. 22.101(As per Old Schedule 2020-21)
151	Providing hard rubber beading at bottom of door covered with aluminium strips for restoration of air conditioning and prolection from rats etc, as per direction of Engineer in charge including cost of materials labour and T&P etc, required for proper completion of work.CSI No. 22.108(As per Old Schedule 2020-21)
152	S/F of 24 gauge Aluminium sheet of approved quality including cutting, wastage, fixing the same over wooden door shutters by nails including cost of all materials, labour and T&P etc.CSI No. 22.113(As per Old Schedule 2020-21)
153	Opening of Aluminium door shutters and refixing the same after replacement of new rubber beading and screws complete Excluding cost of Al, pipe and Glass but including cost Rubber beading and screws. Cost including all labour, materials and T&P etc, required for proper completion of work.CSI No. 22.116(As per Old Schedule 2020-21)
154	Maintenance of seasonal flower bed including digging the earth inbed (minimum depth of bed 30 cm ) as per necessity whenevernecessary during replantation, plantation of seasonal flower,manuring, watering, mixing of manure with earth uprooting the expired plants after its expiry and replacement of the new seasonal plants like its seeds including cost of Chaukidar, work assistant and miss. works as per directed by Engg-in-Charge ( cost of manure, good earth and sand mixture and its spreading shall be paidseparately ) and including fertilizers, pesticides and medicines etc complete. CSI No. 23.03 (a)
155	Same as item No.23.03(a) but for permanentplants. CSI No. 23.03 (b)
156	Supply and stacking of compost manure at site including carriageupto 3 km ( Manure measured in stacks will be reduced by 8% forpayment). CSI No. 23.04
157	Supply and plantation of approved 2 years old plants duly plantedin earthen Gamla of approximate size 300x 300 mm nominal size,filled with compost manure and sand mixed in approved proportionincluding cost of approved quality earthen gamla, compost manure, sand all other materials, labour and T&P etc reqd. for proper completion of work. CSI No. 23.08
158	Supply and planting seasonal flower plants such as Genda, Rose, Ostar, Flox, Guldawadi,Gulmehndi, Cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and T&P etc complete in allrespects. CSI No. 23.10
159	Supply and planting permanent ornamental plant like Croten, Varil pristal, Glodulus, Lily, Fern, Bogenbelia etc. including cost of plants, manure, pesticides, fertilizer, labour and T&P etc complete also including preparation of flower bed. CSI No. 23.11
160	Supply and plantingAshoka, Pendula, Mango, Neem,Peepal,Sheesham etc in pits including cost of all materials, labour and T&p etc complete in all respects.(Cost of digging pitshall be paid separetely as per item no. 23.08). CSI No. 23.12
161	Supply and planting of Garden Grass (Australian). including cost of plants, manure, pesticides,fertilizer, labour and T&P etc complete also including preparation of bed. CSI No. 23.14
162	Arranging one mali for maintenance of lawn & plants, including cost of Mali, required T&P and other miscellaneous work as per direction of Engineer I/c.CSI No. 23.15
163	Hedge plantation in a row distance between two hedge 15 to 25 cm including digging hole 6” to 12” ,manure and treatment with proper chemical etc., including cost of all materials,labour and T&P etc complete in all respects.CSI No. 23.16
164	Wiring point for light with 1.5 sq. mm. FR PVC insulated multistrand single copper conductor cable in PVC conduit pipe concealed in the wall, 14 SWG copper PVC coated Earth continuity wire, and approved quality, piano type switch ceiling rose/angle/batten holder as per approved sample on 3mm thick phenolic laminated bakelite sheet etc. of matching shade with wall colour complete in all respect. PSI No. 121 (B)
165	Wiring point for fan/fresh air fan (light duty exhaust fan) 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable PVC conduit pipe concealed in the wall, 14 SWG copperearth continuity wire and approved quality, piano type switch & ceiling rose as per approved sample on 3mm thick phenolic laminated backelite sheet etc. of matching shade with wall colour complete in all respects as per direction of E/I. PSI No. 123 (B)
166	Wiring point for plug with 1.5 sq. mm FR PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall 14 SWG copper earth continuity wire and approved quality type switch and socket as per approved sample etc. of matching shade with wall colour complete in all repects as per direction of E/IPSI No. 124 (B)
167	Supply and burring of safe Earthing electrode T-39 Cu copper coated, length 2000mm outer pipe 76.3mmx3.2 inner pipe 42.4mm x2.6mm terminal dia 12mm, coating 80-100 micron filled with crystalline property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm squre C.I. frame with hinged cover & massory housing. (From electrode terminal to switch board, cost of 25x3 copper strip will be extra.PSI No. 727(c)
168	Supply and fixing of power plug with 15A/240V V flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mmx 100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.CSI No. 21.20 (As per Old Schedule 2020-21)
169	S/R of bakelite angle holder of SSK or equivalent make of approved quality including cost of all labour material, T&P etc. required for proper completion of the work. CSI No. 22.51 (As per Old Schedule 2020-21)
170	S/R of Piano type switch 6 Amp 250 volt of Havells or equivalent make of approved quality including cost of all labour material, T&P etc. required for proper completion of the work. (A) Without frameCSI No. 22.52 (a) (As per Old Schedule 2020-21)
171	S/R socket 2/3 pin 6 Amp 250 volt of Havells or equivalent make of approved quality by E/I. including cost of all labour material, T&P etc. required for proper completion of the work. (A) Without frame CSI No. 22.53 (a) (As per Old Schedule 2020-21)
172	Add extra for using 12mm long C.P. brass heavy quality 15 mm dia Extension nipple for bib/stop cock etc complete. CSI No. 24.27 (A) (As per Old Schedule 2020-21)
173	Providing and fixing 80/100 mm dia C.I. D-Jonit with ring rubber packing nut, bolt and washer etc. complete as per direction of E/I. CSI No. 24.50 (As per Old Schedule 2020-21)
174	Providing and fixing JET with pipe heavy quality including supply of all material, labour and T&P etc. required for proper completion of the work.CSI No. 24.54 (As per Old Schedule 2020-21)
175	Providing and fixing glass shelf 7/32” (5.50mm) thick of 600 mm × 130 mm size with C.P. brass guard rail of standard size and brackets fixed to wooden cleats with C.P. brass screws including supply of all materials, labourand T&P etc. required for proper completion of work .CSI No. 25.22 (As per Old Schedule 2020-21)
176	Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.CSI No. 26.01 (a)
177	Same as item No. 26.01(a) but for 20 mm dia.CSI No. 26.01 (b)
178	Same as item No. 26.01(a) but for 25 mm dia.CSI No. 26.01 (c)
179	Same as item No. 26.01(a) but for 32 mm dia.CSI No. 26.01 (d)
180	Same as item No. 26.01(a) but for 40 mm dia.CSI No. 26.01 (e)
181	Same as item No. 26.01(a) but for 100 mm dia.CSI No. 26.01 (i)
182	Providing & fixing half turn 15mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.05 (a)
183	Providing & fixing half turn 20mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.CSI No. 26.05 (b)
184	Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.06 (a)
185	Providing and fixing PVC CONNECTION PIPE, 450X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.CSI No. 26.09 (b)
186	P/F GI UNIONS NOMINAL BORE 15 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.10 (a)
187	P/F GI UNIONS 20 mm NOMINAL BORE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.CSI No. 26.10 (b)
188	Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. CSI No. 26.12
189	Providing A.C. box with MCB, Anchor/Havells or equivalent make as per direction of E/I.CSI No. 26.13 (As per Old Schedule 2020-21)
190	P/FBRASS BIB COCK, 15 mm dia (400 gsm) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.13 (a)
191	Same as item No. 26.13 (a) but for supply and fixing of 15 mm dia CI/ PVC bib cock including replacing of old bibcock complete. CSI No. 26.13 (c)
192	Providing & installation of 5KVA voltage stablizer of (110V-280V) rating with copper wiring of Blue Bird or its equivalent price brand.The rate are inclusive of cartage,manpower, t&p etc required to complete the work in all respect.CSI No. 26.16 (As per Old Schedule 2020-21)
193	Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.16 (a)
194	Providing and fixing CP BRASS SHOWER HEAVY QUALITY ( > 225 gms) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.16 (e)
195	Providing and fixing CP BRASS wash basin mixer HEAVY QUALITY ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.16 (f)
196	Providing and fixingCP BRASS wall mixerHEAVY QUALITY( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.16 (g)
197	Providing and fixingC.P.BRASS telephonic shower HEAVY QUALITY ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.16 (h)
198	Providing and fixingCP BRASS Angle Valve HEAVY QUALITY( L&K or equi. ) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.16 (i)
199	Providing and fixingCP BRASS Piller cock HEAVY QUALITY ( L&K or equi. ) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.16 (j)
200	Providing and fixingCONCEALED STOP COCK HEAVY QUALITY ( L&K or equi. ) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. CSI No. 26.16 (k)
201	Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work.CSI No. 26.17
202	Providing and fixing 15 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. CSI No. 26.19
203	Providing and fixing 20 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. CSI No. 26.20
204	Providing and fixing 25 mm dia ISI Approved CPVCpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. CSI No. 26.21
205	S/F high tensile steel colour coated Anti rust, high temp resistant sheet with tensile strength 550 PMA hot dip metallic (Zinc Aluminium) alloy (Zn-55%) Al, (45%) coating 70 GSM with total thickness not less than 0.50 mm (TCT) durashine or equivalent make with necessary over lops incl S/F Galvamized J/V hook with bolts, nuts, washer and bitumen washers etc. incl, cost of material, labour T&P etcincluding cost of material, labour T&P etc, required for proper completion of work as per direction of E/I confirming A.S. 1397:199. CSI No. 26.60 (As per Old Schedule 2020-21)
206	Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trapincluding supply of all materials,labour and T&P etc.complete.CSI No. 27.01
207	Same as in item no. 27.01 but of European type. CSI No. 27.02
208	Providing and fixing PLASTIC SEAT COVERCOMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKEDincluding supply of all materials,labour and T&P etc.complete. CSI No. 27.04
209	Providing and fixing flat back 430X370X340 mm . size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. CSI No. 27.06
210	Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. CSI No. 27.08
211	Same as in item 27.08 above but when wash hand basin of size 450X300 mm size is used. .CSI No. 27.10
212	Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work.CSI No. 27.12
213	Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. CSI No. 27.13
214	Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. CSI No. 27.14
215	Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work.CSI No. 27.15
216	Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved qualityincluding bracketsincluding supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work.CSI No. 27.16
217	Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work.CSI No. 27.19
218	Supply and fixing 100 mm.PVC trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. CSI No. 27.21(b)
219	Providing and fixing 100 mm dia white glazed "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.).CSI No. 27.23
220	Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED ) includingall materials, labour cartage T&P etc.required for proper completion of the work.CSI No. 27.26
221	Providing and laying75 mm Dia.SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work.CSI No. 27.29 (a)
222	Same as in item 27.29 (a) above but for 90 mm Dia.CSI No. 27.29 (b)
223	Same as in item 27.29 (a) above but for 110 mm Dia.CSI No. 27.29 (c)
224	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.CSI No. 28.19
225	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. CSI No. 28.26
226	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm. CSI No. 28.28
227	Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profilewhite/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong MiniralFobre Sound Absorbing SheetCSI No. 28.30
228	Providing and fixingACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACPof 4.0 mm thickness. CSI No. 28.31
229	Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havellsor equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.CSI No. 28.38
230	Rewinding of 15 H.P sub- merssiblemotor with 2.10Sqmm. PVC insulated copper wire of Finolex or equivalent make as per approved sample including cost of winding wire and PVC insulated sheet etc, including dismantling of sub- mersible motor from pump and column pipe and taking out burnt copper wire from its slots and cleaning of slots with sand paper and rewinding including cost of its testing up to 24 hrs and guarantee for 6 months for its smooth and normal working including all cost of material, labour and T&P etc, required for proper completion of work. (Burnt copper wire cost is adjusted in given rate and shall be the properly of contractor.NSI
231	P/F openable steel glazed windows and ventilators of standard rolled Z section conforming to IS 7452 1974 and welded with (100×20×5) mm holdfast embedded in C.C. block (23×11.5×7.5) cm size of 1:2:4 proportion of cement, coarse sand, & 20mm graded stone ballast as per drawing etc. complete but excluding S/F of glass panes of 4mm thick with nuts glazing clips with special putty of approved make etc. The fabrication should conform to IS 1038 1975. including cost of all materials, labour & T&P etc. (Rate already Sanction by Agr. No. 07/2020-21) NSI
232	Same as Item no. 230 abovebut for fixed portion. (Rate already Sanction by Agr. No. 07/2020-21)NSI
233	Providing and fixing Ist qaulity One piece European Type white glazed floor mounted seat ISI maked size 695x385x700mm as per approved sample including 10 Lit capacity white glazed seat mounted air pressure with flushing cistern plastic seat cover with plastic lid C.P brass hings and rubber buffers with 15mm dia PVC connection 600mm long including supply all material labour T&P etc required for proper completion of the work. (Rate already sanction by Agr. No. 07/2020-21) NSI
234	Supply and fixing Ist quality cera make white glazed wash hand basin with pedestal size (650x515x240)mm including its fixing with all labour & T&P etc. (Rate already sanction by Agr. No. 07/2020-21) NSI
235	Supply and fixing Ist quality Jaguar make 15mm dia C.P brass central hole basin sensor faucet (model No. 51011) battery oprated includingits fixing with all labour & T&P. (Rate already sanction by Agr. No. 07/2020-21)NSI
236	S/F best quality bamboo stick incl. with iron wire and fixing through fastener incl. all labour T&P etc. (Rate already sanction by Agr. No. 07/2020-21) NSI
237	Finishing of walls with three coats water proof exterior emulsion paint “ACE” “Out Look” or equivalent make on new work including one priming coat (1 Liter paint diluted including 0.75 liter of water) to give an even shade complete including cost of all materials, labour and T&P etc, as per direction of E/I. (Rate already sanction by Agr. No. 07/2020-21) NSI
238	Two coat of ACE on previously old treated surface on exterior walls. (Rate already sanction by Agr. No. 07/2020-21) NSI
239	Change thermo state and element in Havells 11 fin electric oil filled radiator room heater 2900 W with all labour & T&P. (Rate already sanction by Agr. No. 07/2020-21)NSI
240	S/R of brass spendil with washer of approved quality and make for bib/stop/pillar cock. (Rate already sanction by Agr. No. 07/2020-21)NSI
241	S/R of syphone system of PVC cistern including all material, labour and T&P etc. complete. (Rate already sanction by Agr. No. 07/2020-21)NSI
242	S/R of PVC Tank Cover of 500\200 liter tank including locking arrangement etc. complete. (Rate already sanction by Agr. No. 07/2020-21)NSI
243	S/F of PVC handle of PVC cistern of approved quality etc. including all material, labour and T&P etc. complete. (Rate already sanction by Agr. No. 07/2020-21)NSI
244	Supply and fixing 1200mm size sweepceiling fan (G.E.C./ Polar/Crompton /Usha or equivalent approved make) with double ball bearing, step type electronic regulator, necessary wire and 900 mm long hanging rod with double Canopy etc. including testing and commissioning as per direction of Engineer-in-charge. (Rate already sanction by Agr. No. 07/2020-21) NSI
245	S/F soap dispenser make Ist quality transparent vessel and C.P. brass Nozel use for filling hand wash liquid including fixing. (Rate already sanction by Agr. No. 07/2020-21) NSI
246	P/F 3mm thick fiber sheet including its cutting and fixing. (Rate already sanction by Agr. No. 07/2020-21) NSI
247	Supply and fixing Ist qualty door loock rectangular and round shape including its fixing. (Rate already sanction by Agr. No. 07/2020-21) NSI
248	Supply and fixing stainless steel plate robe hook, 8 long including its fixing.NSI
249	Hiring charges of Hydra machine with Fuel & Driver for lifting, removing & Disposal at proper place of fallen huge trees in campus at Hydel Colony Victoria Park, Meerut including all labour & T&P etc required for completion of work as Instructedby E/I. (Rate already sanction by Agr. No. 07/2020-21)NSI
250	Supply & fixing 1.5 H.P. submersible starter contact relay including its fixing. (Rate already sanction by Agr. No. 07/2020-21)NSI
251	Supply & fixing 15mm dia P.V.C. flexible pipe for uses in garden & plants water supply. (Rate already sanction by Agr. No. 07/2020-21) NSI
252	Supply & fixing 20mm dia P.V.C. flexible pipe for uses in garden & plants water supply. (Rate already sanction by Agr. No. 07/2020-21)NSI
253	Providing and lowering of 50mm dia P.V.C. flexible pipe make with coupling socket etc including cutting the pipe of required length and fixing including cost of all materials labour and T&P. (Rate already sanction by Agr. No. 07/2020-21)NSI
254	Service of 15 KVA Generator including changing all filters, oil, petty parts with all labour & T&P. (Rate already sanction by Agr. No. 07/2020-21) NSI
255	Supply and fixing 2mm thick transparent polythene heavy quality including its cutting of required size and fixing with 25mm long metro screw with all labour and T&P. (Rate already sanction by Agr. No. 07/2020-21) NSI
256	Supply and fixing M.S 16mm dia 150mlong Anchor bolt fixing with hammer drill machine with all labour and T&P. (Rate already sanction by Agr. No. 07/2020-21) NSI
257	Supply and Harrison CX-3000-0557 stainless steel 11 leaves pad lock with 3 key. (Rate already sanction by Agr. No. 07/2020-21) NSI
258	Supply of plastic body 12 Lit capacity pedal dustbin with removal garbage bag. (Rate already sanction by Agr. No. 07/2020-21) NSI
259	Supply and fixing Jaguar make 5 Lit capacity wall mount cistern including its fixing with all labour and T&P. (Rate already sanction by Agr. No. 07/2020-21)NSI
260	Supply and fixing 200mm dia 26 Watt circular LED light with adaptor in lift including its fixing charge. (Rate already sanction by Agr. No. 07/2020-21)NSI
261	Supply and fixing 15mm dia C.P brass Alton grace make 2 in 01 wall mixer with 40m long C.P brass extension pices including its fixing with all labour and T&P. (Rate already sanction by Agr. No. 07/2020-21) NSI
262	Repair of grass cutting machine including motor binding supply new blade, supply new condenser with all labour and T&P. (Rate already sanction by Agr. No. 07/2020-21) NSI
263	Supply and installation Luminous RC-25000 200 AH Tubular battery including its installation charge. (Rate already sanction by Agr. No. 07/2020-21)NSI
264	Supply of 2000W Bajaj make Blower with two heat setting and auto thermal cut-out. (Rate already sanction by Agr. No. 07/2020-21) NSI
265	Supply and fixing of U.P.V.C 80mm dia 11 Kg/cm2 coloumn pipes aashirvad make with coloumn coupling socket as required for proper completion of work including all labour material &T&P.(Rate already sanction by Agr. No. 18/2022-23) NSI
266	Roof treatment work with 2mm thick Dr. Fixit URPwith cement salary and fiber glass mesh 1mm thick Ist coat URP and cement mixer ratio (1:1.5) on properly cleaned roofsurface and laying fiber glass cloths after once again 1mm thick 2nd coat URP and cement mixer in ratio (1:1.5) including all labour & T&P. (already Sanction by S.E (C) vide OM. No. 779/ECDC/MT/WT-1 Dt. 01.07.2022) NSI
267	Making & fixing flex board size (5"x4") with 25mmx25mm light weight hollow pipe frame including writting as per required metter with all labour & T&P. (Rate already sanction by Agr. No. 18/2022-23)NSI
268	Supply and fixing 10mm dia supporting cable for support 15 H.P submersible pump in loweringincluding all labour & T&P. (Rate already sanction by Agr. No. 18/2022-23)NSI
269	Supply and fixing 10mm dia supporting cable for support 15 H.P submersible pump in loweringincluding all labour & T&P. (Rate already sanction by Agr. No. 18/2022-23)NSI
270	Supply and fixing 24 watt LED tube light Phillips, Havells and equvalent make including its fixing & T&P. (Rate already sanction by Agr. No. 18/2022-23)NSI
271	Supply and fixing of under water flood light, recess mounting suitable for & with 50 watt lamp confirming to IP 68 protection including its installation. (Rate already Sanction by S.E (C) vide O.M No.-472/ECDC/MT/WT-1 Dt. 20.04.2022) NSI
272	Supply and fixing 9 watt LED bulb Bajaj, Havells, Phillips & equivalent make of approved quality by E/I including cost of all labour material & T&P etc. (Rate already sanction by Agr. No. 18/2022-23) NSI
273	Supply and fixing 15 Amp 250 volt, socket of Havells, anchor or equivalent make of approved quality by E/I including cost of all labour material & T&P etc. (Rate already sanction by Agr. No. 18/2022-23) NSI
274	Supply and fixing 15 Amp 250 volt, socket of Havells, anchor or equivalent make of approved quality by E/I including cost of all labour material & T&P etc. (Rate already sanction by Agr. No. 18/2022-23) NSI
275	Supply and fixing Havells make 63 Amp four pole change over including its fixing with all labour & T&P etc.(Rate already sanction by Agr. No. 18/2022-23) NSI
276	Supply and fixing door bell of anchor or equivalent make of approved quality by E/I including cost of all labour material & T&P etc.(Rate already sanction by Agr. No. 18/2022-23) NSI
277	Supply and fixing 12 watt LED bulb Bajaj, Havells, Phillips make of approved quality by E/I including cost of all labour material & T&P etc.(Rate already sanction by Agr. No. 18/2022-23) NSI
278	Supply and fixing ACP sheet name plate with night refleted material including writing required name & degigration including its fixing.(Rate already sanction by Agr. No. 18/2022-23) NSI
279	Supply and fixing call bell of anchor or equivalent make of approved quality by E/I including cost of all labour material & T&P etc.(Rate already sanction by Agr. No. 18/2022-23) NSI
280	Engaging of Carpenter for petty works of site etc. as per direction E/I.Based on. CSI No. 1.10
281	Engaging of Plumber for petty works of site etc. as per direction E/I.Based on. CSI No. 1.15
282	Engaging of belder/majdoor for petty works of site etc. as per direction E/I.Based on. CSI No. 1.20
283	Engaging of electrician with kit for petty repair of electrical works, etc. as per direction of E/IBased on. CSI No. 1.36
284	CIRCUIT WIRING/ SUBMAIN WIRING:Circuit wiring starting from Distribution Boxto point control box/switch box inPVC (Heavy)25mm dia conduits, using accessories such as bends, tees, saddles, draw boxes, mounting boxes, inner plates, cover plates, ceiling rose etc. (including chase cutting & filling of chase where ever required) with PVC insulated 1100V grade FR multi-stranded copper conductor wire (color code to be used). Identification ferrules at both end to be provided.Circuit wiring using 2 runs of 2.5 sq.mm+ 1 run of 1.5sqmm PVC insulated copper wire drawn in25mm dia 2 mm thick PVC conduits as lighting circuits being reckoned from distribution board to first light / Fan control switch Boards PSI No. 1307 (c) UP PWD SOR 2009
285	Circuit wiring using 2 runs of 4.0 sq.mm+ 1 run of 2.5 sqmm PVC insulated copper wire drawn in25mm dia 2 mm thick PVC conduitsPower circuits being reckoned from distribution board to first Power control switch Boards. (for power points 15 Amp) PSI No. 221 (c)
286	Circuit wiring using 2 runs of 6.0 sq.mm+ 1 run of 4.0 sqmm PVC insulated copper wire drawn in25mm dia 2 mm thick PVC conduits asPower circuits being reckoned from distribution board to first Power control switch Boards. (For A.C.) PSI No. 222 (c)
287	Supply and wiring of submain with two number 10 sqmm PVC insulated 1100 V grade single core aluminium conductor cable in 25mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab along with reinforcement before concerting with one number 8 SWG GI earth continuity wire including matching colour wash etc complete in all respect.PSI No. 123
288	Supply and fixing 6A to 32A SP MCBC curve- 10 KA PSI No. 1002
289	d)63 Amp. Isolator PSI No. 1005 (B)
290	Surface flush mounted 8 ways S.P.N. distribution board. PSI No. 1024