Tender For Constructing Two Room School Building For Z P Naad Bholewadi Tal Devgad
Tender Value
19.88 Lakhs
Estimated cost
Bid Submission
21 Sep 2023
0 days left
EMD
19900
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kankavli → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Two Room School Building For Z P Naad Bholewadi Tal Devgad
BOQ
| Sl. No. | Item Description |
| 1 | 1)Excavationfor foundation in earth soil of all types sand gravel soft murum including removing the excavated materials uptoi a dis. Of 50m. Beyond the bldg.area and lift as specified stacking and spreading as directed including dewatering unless provided elsewehre preparing the bed for the foundation and necesary backfilling ramming watering complete including shoring and strutting |
| 2 | 2)Excavation for foundation in soft rock including removing the excavated materialsup to distance of 50meters,beyound the building area and lift upo to 1.50 m, stacking and spreding as directed including dewatering,unless provided elsewhere, preparing the bed for the foundation and necesaary back filling,ramming,wateringetc .complete .(excluding shoring and strutting)spec no. |
| 3 | 3)Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water,Steel centering,formwork,laying/pumping,compacting,roughening them if special finish is to be provided,finishing if required and curing complete,with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) R.A. |
| 4 | 4) Providing laterite stone masnory in cement mortar 1:6 in foundation & plinthincluding racking out joints where plastering is to be done watering & scaffolding complete.R.A. |
| 5 | 5) Filling in plinth and floors with approved excavated materials in 15cm to 20cm layers including watering and compaction complete |
| 6 | 6) Providing soling using 80mm size trapmetal in layers of 15cm each including filling voids with sand ramming watering etc. P/I Circular 1 / 1 |
| 7 | 7) Providing and casting in situ cement concrete M-20 of trap metal for R.C.C. beams & lintels as per detailed design and drawings including centering, formwork, compacting, roughening the surface, if special finish is to be provided and curing (excluding steel reinforcement) . R.A. |
| 8 | 8) Providing & fixing in position steel bar reinforcement of various dia. For RCC pile caps, footing, foundations, slabs beams, coloumns, canopies, staircases, newels, chajjas, lintles, parides, coping, fins , arches etc as per detailed design, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack wleding and supporting as required complete (5 kms lead) hysd |
| 9 | 9) Providing laterite stone masnory in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering & scaffolding complete R.A. |
| 10 | 10) Providing and fixing seasoned and treated non teakwood frame as per drawing for second class doors without ventilators, windows, fanlights etc., including all mouldings, rebating, holdfast and finishing with one coat of primer complete. R.A. |
| 11 | 11) Providingand fixing Solid core Flush door shutter commercial single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailded drawings with wrough iron hold fast stainless steel fixtures and handles on both sides and finishing with oil painting 3 coats complete. |
| 12 | 12)Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite |
| 13 | 13)Providing and fixing in position.(as per I.S.1868/1982)Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50x38.10x1.02 mm at weight 0.547 Kilogram/ Runningmetre.andwindowframebottomtracksection61.85x31.75x1.20mmatweight0.695Kilogram/Running metre.Top and side tracksection61.85x31.75x1.30mmatweight0.659Kilogram/Runningmetre.The shutter should be of bearing bottom 40 x18x1.25 mm at weight0.417Kilogram/ Running metre.Interlocking section 40x18x1.10 mm at weight0.469Kilogram/ Runningmetre.And handle section40x18x1.25 mm at weight0.417Kilogram/Runningmetre.andtopsection40x18x1.25mmatweight0.417Kilogram/Runningmetre.AsperdetaileddrawingsandasdirectedbyEngineerinchargewithallnecessaryAluminiumsectionsfixturesandfasteningssuchasrollerbearinginnyloncastingandselflockingcatchfittedinverticalsectionofshutterincluding5mmthickplainglass with all required screws and nuts etc, complete. With powder coating with box |
| 14 | 14) Providing and fixing mild steel grill work for windows, ventilators weighing15 kg per sq.m as per drawing , including necessary fixtures welding and painting with one coat of anti- corrosive paint etc . complete.- |
| 15 | 15) Providing structural steel work in trusses other similar trussed purlins and members with all bracing, gusset plates etc.asper detailed design and drawings or as directed by Engineer in Charge including cutting fabricating hoisting erecting fixing in position making riveted/bolted/welded connectedand one coat of anticorrosive paint and over it two coats oilpainting of approved quality and shade complete |
| 16 | 16)Providing and fixing of colour coated Zinc aluminium (R) AZ 150 (min 150gms/sq. mt. total one ach side)profiled sheets for roofing.The feed materialis manufactured out of nominal 0.45 mm Base MetalThickness(BMT)(0.5mmTCT),Hi-strengthsteelwithmin.550MPayieldstrength,metallichotdipcoatedwithAluminium-Zinc alloy (55% aluminiumm 43.4%zinc 1.6%silicon) with COLOR BOND (R) steel quality super durable polyster paint coat (within or ganicp igment).Thepaintshallhaveatotalcoatingthicknessofnominal35mm,comprisingofnominal25mmexteriorcoatontopsurfaceandnominal10umreversecoatonbacksurface.Profilesheetshallhavenom.950-1050mmeffectivecoverwidthandnominal25-30mmdeepribswithsubletsquareflutinginthefivepanatnominal180-250mmcenter-to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeedmaterialshouldhavecoilmanufacturersproductdetailsmarkedaregularinterval.includingfastenerswithmin.fastenedwithmin.25umZinc-Tinalloycoated,Hexhead,self-drillingscrewetc.complete.(weightofprofile4.52Kilogram/SquareMetre)600mmgirth(SurfaceWidth).- |
| 17 | 17)Providing and fixing plain zinc sheeting of 0.80 mm thick (22B.W.G.)over the ridge hip orvalley to galvanized iron sheet roof ingincluding all fastening and bolt galvanised iron screw sand bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). |
| 18 | 18) Providing & fixingManglore tiles with AA tiles including scaffolding to M.T. roofing excluding wood work etc completeR.A. |
| 19 | 19) Providing and fixing Mangalore type ridge and hip tiles class \"AA\" tiles, including scaffolding if necessary, pointing with coloured cement mortar and curing complete |
| 20 | 20)Providing internal cement plaster 12 mm thick in a single coat in C.M. 1:4 with neeru finish to concrete or brick surface in all position including racking out joints scaffolding and curing completeR.A |
| 21 | 21) Providing and laying Vetrified matt finishof IS std and approved quality 590 mmx 605 mmsize for for flooring in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level in plaster of cement mortar 1:4 including joint filling with white/ colour slurry cleaning curing complete |
| 22 | 22)Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) ofapproved make, shade and pattern for dado and skirting in required position fixedin 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete. |
| 23 | 23)Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface.(excluding the primer coat)etc. complete |
| 24 | 24)Providing,painting,letteringName board on plastered surface of wall |
AI Tender Summary
Tender Timeline
Sep 14, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 22, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender