Military Engineer Services-MES has published Tender For Additional /Alternator To Pop Drill Square And Ancillary Structures At Ota Gaya. Submission Date for this Tender is 23-10-2023. Structural Work Tenders in gaya Bihar. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Oct-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-10-2023 |
| 2 | 14-Oct-2023 | Date Corrigendum | Date | 23-10-2023 |
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outin hard/dense soil complete all as specified and directed. |
| 4 | Excavating in trenches, exc 1.5 m wide and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outin hard/dense soil complete all as specified and directed. |
| 5 | Excavating over areas n exc 1.5m in depth for foundation etc and getting out in hard/dense soil complete all as specified and directed. |
| 6 | Excavating over areas exc 1.5m but n exc 3.00m in depth for foundation etc and getting out in hard/dense soil complete all as specified and directed. |
| 7 | M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete. |
| 8 | M & L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 9 | M & L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 10 | M & L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Columns, pillars, piers, posts and struts. |
| 11 | M & L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Beams, cantilevers, bressumm ers, lintels over 1.5m span. |
| 12 | M & L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Chajjas. |
| 13 | M & L for reinfoced cement concrete M-30 (design mix) using 20mm graded stone aggregate in foundationsincluding rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 14 | M & L for reinfoced cement concrete M-30 (design mix) using 20mm graded stone aggregate in walls, basement walls and the like, any thickness, above top of footings including attached pilasters and buttresses complete all as specified and directed. |
| 15 | M & L for reinfoced cement concrete M-30 (design mix) using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 16 | M & L for use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surface of concrete complete all as specified and directed. |
| 17 | M & L for use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished flat surface of concrete complete all as specified and directed. |
| 18 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 19 | M & L for use and waste of ormwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished flat surface of concrete complete all as specified and directed. |
| 20 | M & L for use & waste of formwork to faces of walls. retaining walls, abutments, parapets & staircase railing and similar work including attached pillasters, buttresses etc vertical or to batter of rough finished surfaces of concrete complete all as specified and directed. |
| 21 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 22 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 23 | M & L for brick work with sub class "B" old size bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 24 | M & L for brick work with sub class "B" old size bricks straightor curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 25 | M & L for brick work with sub class "B" old size bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:4 in walls of soakage well, manholes etc complete all as specified and directed. |
| 26 | M & L for brick work with sub class "B" old size bricks straightor curved on plan to any radius in one brick thick honeycomb walling built in cement mortar 1:4 complete all as specified and directed. |
| 27 | M & L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed. |
| 28 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as secified and directed by Engr-in-charge. |
| 29 | M&L for rendering 10mmthick in ceiling on brick work or concrete surfaces in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | Supply onlyLiquid water proofing compound. |
| 31 | M & L for 2 mm thick of Birlawhite putty/JK white wall care putty in two coats on new/old plastered surfaces and making the surface uniform & smooth on walls/ceilings complete all as specified and directed. |
| 32 | M & L for preparing new plastered surface of wall and applying two coats of distemper oil emulsion white or tinted over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed. |
| 33 | M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash as in ceiling complete all as specified and directed. |
| 34 | M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 35 | M&L for Sand filling under floors or in foundations including watering and consolidation. |
| 36 | M&L for spreading and levelling n.exc 25cm thick includingwell ramming incl watering all as specified and directed by Engr-in-Charge |
| 37 | M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floorcomplete all as specified and directed. |
| 38 | M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement. |
| 39 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed. |
| 40 | M & L for Glazed ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick rendering in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 41 | M&L for Hard core of gauge n exc 63mm thick of broken stone or boulders spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge.. |
| 42 | M&L for hardcore of gauge n exc 63mm thick of broken bricks spread leveling watering ramming to true surface complete all as specified and directed. |
| 43 | M&L for 50 mm thick PCC 1:3:6 type C2 in plinth protection finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.. |
| 44 | Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed. |
| 45 | Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point. |
| 46 | S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 47 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing. |
| 48 | S & F Powder coated aluminium frame/shutters for doors, windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws,etc complete all as specified.Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section. (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 49 | S & F stainless steel butt hinges, medium weight cold rolled of size 100 mm. |
| 50 | S & F 150 mm long anodised aluminium handles, cast type D shape complete. |
| 51 | S & F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed. |
| 52 | S & F Aluminum alloy, anodized, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy size 250mm long. |
| 53 | Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 including all fittings on walls/ceilings or in floors including necessary cutting/chasing of walls and floors complete all as specified and directed. |
| 54 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 including all fittings on walls/ceilings or in floors including necessary cutting/chasing of walls and floors complete all as specified and directed. |
| 55 | S & F of 25mm Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete. |
| 56 | S & F of 20mm Male Brass Threaded Adaptor (MTA/ MBTA)or Female Brass Threaded Adaptor (FTA/ FBTA) complete. |
| 57 | S & F 1000 litres capacity white rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) multilayered hoisted and fixed in position complete all as specified. |
| 58 | S & F 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. |
| 59 | S & F 25mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed. |
| 60 | S & F 20mm dia bore CPVC gate valves with handle or wheel head, screwed both ends for pipe and fixed. |
| 61 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors and connecting with manholes or disposal place. |
| 62 | S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 63 | S & F 110mm dia borePVC (SWR) bends with access door all as specified and as directed. |
| 64 | S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints,fixed to pipes all as specified. |
| 65 | S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete. |
| 66 | S & F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 67 | S & F 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete. |
| 68 | S & F white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. (Make : Jaguar/Hindware) |
| 69 | S & F brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etccomplete all as specified and directed.(Make : Jaguar/Hindware) |
| 70 | S & F vitreous China Urinal, Half stall type, white incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and union for discharge pipe complete. |
| 71 | S & F Vitreous china urinal partition white of size 310x700 mmterminating about 40cm above floor line complete. |
| 72 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 73 | S & F vitreous china wash basin, white, flat back size 550x400mm excluiding taps, chain and plug including waste pipe, brackets, 32 mm dia CP coupling cutting for and pinning in ends for brackets or ercting stand complete all as specified and directed. |
| 74 | S & F PVC connections 15mm size with PTMT nuts of length 600mm complete. |
| 75 | S & F 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.(Saint Gobain/ModiFloat) |
| 76 | S & F 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 77 | S & F 15 mm dia bore fancy type chromium plated two way bib taps/angle valves, cast copper alloy with crutch or butterfly handle screwed down, high pressure, screwed both ends for iron pipe or for unions. |
| 78 | S & F 15 mm dia bore fancy type chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 79 | Supply & fix brass chromium plated pillar tap swan neck long body fancy typefor wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete. |
| 80 | S & F chromium plated soap dish, any type, fixed to plugs with chromium plated brass screws and embedded in the wall. |
| 81 | S & F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete. |
| 82 | S & F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete. |
| 83 | M & L for providing water proofing treatment over cleaned roof surfaces with super thermo APP modified water froofing membrane comprssing of following for non-approachable roof:- (i) Removal of existing roof treatment and cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc.(ii)Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm.(iii) One layer of super thermo APP modified water proofing membrane with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd ) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions. (iv)Applying two coat of aluminium paint @ 0.20 kg/sqm per coat over bitumen layers as per manufacturer instruction (application including side lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction/specification. |
| 84 | M & L for 180mm outer diameter DWC HDPE pipe class SN-8 laid in trenchesand jointed as specified and directed. |
| 85 | M & L for concrete bed in cement concrete 1:3:6 type C-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 86 | M & L for providing precast cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) and similar articles with plain faces and setting in cement mortar 1:4 complete all as specified and directed. |
| 87 | Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete. |
| 88 | Taking down existing old Extg unserviceable flood light /garden lightof any description and sizecomplete. |
| 89 | Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire amoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of following sizes complete all as specified and directed. |
| 90 | (a) 3.5 core x 35 Sqmm |
| 91 | (b)4 core x 10 sqmm |
| 92 | Supply and fixing LED flood light fitting with energy saving & environmental friendly long life versalite pressure die cast housing with toughened glass and individual high power LED with secondary optics of capacity 120 watt 240 volts AC 50 Hz IP-65 protection including necessary electrical connection and five years on site warranty from manufactures complete. |
| 93 | Supply & fix LED post top lantern light fitting 35/36 watt IP 65 complete with all accessories fixed on existing GI pipe of any length including electrical connection from light fitting to junction box with 3 core copper cable of suitable length complete all as specified and directed. Make: Havells Cat Part No. RUBYPT35WLED830PSYMTOPC / Surya Cat Part No. SLE PT 36W ETPP or equivalent Model/design in Crompton/Philips/Bajaj |
| 94 | S & F in replacement PVC Junction box of size 155mm x 210mm x 92mm outdoor type, IP-66 weather proof, factory made out of PVC sheet with integrated membranes / metric knockouts having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising ofaluminium bus bar for phases & neutral, insulated with insulators, including colour coding complete all as specified and directed. Make: Hensal Cat Part No. DK 1616 G |
| 95 | M & L earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr. Belowground level connecting to GI Strip 32x6 mm dia size by means of bolts, check nuts and washers of GI and earth strip protected by provision of GI pipe light grade, 40 mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded crushed stoned aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wiremesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion. Note:- Item of earthing includes cost of 7.5 m long GI Strip 32mm x 6mm and protection pipe of 40 mm bore GI light grade. |
| 96 | M & L for earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-1 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and connected to earthing point complete all as specified and as directed. |
| 97 | Supply, fabrication, installation and testing of LT Panelout door type factory made CPRI approved, water and vermin proof protection of size 800 mm x 600 mm x 400 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 40 x 40 x 5 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable single hinged door/shutter with locking arrangement and power coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing/ incomingcable inclusive of necessary excavation and earthwork as required including the following fitemnent accessories all complete as specified and as directed Note : Rate of earhtwork and PCC work are deemed to be incusive in this item (LT panel for bldg & security light) INCOMING(a) Copper strip busbar of 120 Amps rated capacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (b) 4 pole MCCB 63 Amps with rotary handle microprocessor release type 415 volts, lcs=100% Icu 25 KA breaking capacity including all fixing accessories with both ends spreader links - 01 No (c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts AC 01 set (set of three). (d) Digital Ammeter of range (0-100) Amps, flush mounting type square with CTs of ratio100/5 and selector switch - 01 set (e) Digital voltmeter of range (0-500) volts, flush mounting type, square with selector switch - 01 NosOUTGOING (a) MCB TPN 40 Amps 10 KA,"C" series including connection complete all as specified and directed - 01 No (b) MCB TPN 32 Amps 10 KA,"C" series including connection complete all as specified and directed - 03 Nos (c) Multifunctional Digital type timer switch (Astro type having longitude and latitude of Indian cities memory) 240 volts, AC single phase - 01 No (d) Power contactor 32 Amps 3 pole 415 volts AC - 01 No (e) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm x 150 mm, white with letters, figures and conventional skull and bones in signal red and fixed with nuts and bolts on door/shutter of JB for LT - 01 Nos |
| 98 | Supply and laying pipe galvanized steel water tubing, "medium grade", ISI marked including fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc fixing complete with clips, wall hooks, wooden plugs or laying in trenches, etc complete for following sizes complete all as specified and directed. Note: The rates also include cutting through walls, floors, etc. and their making good. |
| 99 | (a) 20 mm dia |
| 100 | (b) 25 mm dia |
| 101 | Supply & fixing gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for follwing size of pipes compete all as specified and directed :- |
| 102 | (a) 20mm bore pipe |
| 103 | (b) 25mm bore pipe |
| 104 | M & L for cutting existing GI tubing 50mm dia in position and screwed the pipe of bath sides for insertion of tee reducer 50x25mm dia for branch line etc to new water connection complete all as specified and directed. |
| 105 | M&L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall, with modular inner & outer cover for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. Make of Wire : Havells/ Finolex/ PlazaNote: Rate of modular cover plates with frame and modular metal terminal flush boxes are paid seperately in respected items. |
| 106 | (a) One light/fan point controlled by one switch 5 Amp single pole one way |
| 107 | (b) One socket outlet 5/3 pin 5 Amps controlled by one switch on the same board. |
| 108 | S & F modular switch piano type 10 Amps one way single pole 240 volts AC complete all as specified and directed. |
| 109 | S & F modular socket outlet 10 Amps 5 pin 240 Volts multi socket 2 pin+ 3 pin complete all as specified and directed. |
| 110 | S & F modular white cover plate with frame 6 module |
| 111 | S & F modular metal flush box for 6 module |
| 112 | S & F ceiling rose surface bakelite 65x50mm 2 to 3 terminal |
| 113 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 114 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, "C" curve complete all specified and directed. |
| 115 | S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, "C" curve complete all as specified and directed. |
| 116 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc withinstallation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 117 | S & F for wall mounted LED tube light fitting 10 watts batten for mirror type surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc withinstallation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 118 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete as directed at site. |
| 119 | Supply and laying for brick of common burnt clay, sub class "B" old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cales abutting each other complete all as specified and directed. |
| 120 | S & F for exhaust fan heavy duty single phase 250 mm sweep, 240 Volts, AC with and includinglouvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
