Bids Are Invited For Furniture P & F Post Laminated Worktop With Mounter Overall Size1200 / 1500 / 1800 / 2100 X 750 1050 Mm And As Per Requirements, Made From 25Mm Hdhmr , Gandhinagar-Gujarat

Bids Are Invited For Furniture P & F Post Laminated Worktop With Mounter Overall Size1200 / 1500 / 1800 / 2100 X 750 1050 Mm And As Per Requirements, Made From 25Mm Hdhmr Laminated Board Both Sides 1Mm Laminated. All Edges Are Covered By 2 Mm Pvc Edge Bands Glued By An Auto Edge Banding Machine With Hot Melt Glue Ms Brackets Are Provided To Mount With A Partition Or Gable End. Kd Fitting: The Entire Table Is Assembled Through 8Mmx45mm Concealed Bolts With 15Mmeccentric Cranks, 8Mm Wooden Dowels, Etc. Su Complete Drilling And Boring Work Are Done On The Kd - 32 System Multi Drill Machine. All Mounting Holes Are Notched In All Axis Simultaneously In A Single Reference. Complete Interchangeability Is Required In All Parts. Gable End F Type Leg Made From 40X40 Ms Section With Concealed Joineries And Spacers Or Gable Ends Made From Tapper And Slant Fabricated From 2Mm Sheet With Powder Coating And Mounting Flange, In Powder Coating Finish. Tie Frame For Supporting Gable Ends And Modesty In The Bottom Frame Of Work Table Made From 40X20x1.6Mm Box Section Of Crc, Erw, Mssection With Mountings For Interconnection With Gable Ends, Top And Modesty Brackets. Providing And Fixing App 450 / 500 X 400 / 350 Mm Size, 8Mm Thick Laminated Glass Consisting Of Two 4Mm Thick Float Glass Panels, Which Consists Of A Tough Interlayer, Bonded Together Between Two Panes Of Glass &And Cured Under Infrared Radiation. The Glass Screen Should Be Shatter-Proof And Hold Its Position Even After Breakage Due To Inter-Layer And Remain Intact Till Deliberately Removed. All The Panels Have Polished Edges, 25Mm X 25Mm Round Corners On All 4 Sides, And Highly Durable Lacquering On Surfaces 2 And Surface 3. Completeas Per Design And Requirements. Mounting Details:Heavy-Duty Eccentric D Brackets Guided On A Slot Madefrom Zinc Alloy Material With A Positive Locking System. Pre-Fabricated Kd Panels: Providing And Fixing Pre-Fabricated Plywood Kd Panels: Pre-Laminated / Post-Laminated Plywood, 16Mmthick Bwr Calibrated Ply Confirming To Is 303 Covered With Lamination, On Both Sides. All The Edges Are Covered With Matching2 / 0.8Mm Thick Pvc Edge Bands Glued With Hot Melt Glue On Cnc Controlled Through A Feed Edge Banding Machine With The Pre-Milling Operation. Kd Fitting: The Entire Unit Is Assembled Through 8Mmx45mmconcealed Bolts With 15 M Eccentric Cranks, 8Mm Wooden Dowels, Etc. Complete Drilling And Boring Work Are Done On The Cnc Multi-Drill Machine In The Kd-32 System. All Mounting Holes Are Notched In All Axis Simultaneously In A Single Reference. Complete Interchangeability Is Required In All Parts. Computer Chair Low Back Mesh Cc: Providing And Fixing The Chair Of Make As Per Approval. Cushioned Seat And Back, Pp Outer Back Cover, Pp Arms, Single Back Lock, Push-Back Mechanism, Gas Lift For Seat Height Adjustment, Nylon Base With Twin Wheel Castor Total Quantity : 824

Refer document

Refer document

Refer document