Public Works Department-PWD has published Tender For Redevelopment Of Valluvar Kottam In Nungambakkam, Chennai -34. Submission Date for this Tender is 26-09-2023. Civil Work Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Sep-2023 | Date Extension | Date | 26-09-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling , removing and carefully stacking ONE COURSE of pressed tile roof finish in cement mortar etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 2 | Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc.,complete complying with standard specification and as directed by the Departmental officers. |
| 3 | Dismantling the damaged Brick work in cement mortar above 3m height and clearing away carefully disposal of unserviceable materials to lead of 50m etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 4 | Dismantling the damaged Brick work in cement mortar under 3m height and clearing away carefully disposal of unserviceable materials to lead of 50m etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 5 | Dismantling , removing and carefully stacking removal of cut stone slabs & RCC Cover slabs etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 6 | Dismantling , removing and carefully stacking RCC etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 7 | Dismantlingthe aluminium doors and windows shutters from its position with new rubber beading, L angel, Screws and replacement of damaged glass panes with necessary rubber beading, stays, hinges and other materials if necessary including cost of materials, labour charges and dismantling brick or RCC and redoing the same to its orginal condition etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 8 | Dismantling , removing and carefully stacking Doors & windows includung removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 9 | Chipping of concrete & roughening the surfaceetc.,complete complying with standard specification and as directed by the Departmental officers. |
| 10 | Chipping of plastered surface in the walletc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 11 | Installation Charges inclusive of Transportation to site and the Boredpile equipment employed for the works including setting up of pile driving equipment with all accessories and tools at each of the pile location based on the sequence of operation approved by the departmental Engineers irrespective of the location and distance involved in movement of pile driving equipment etc., complete. |
| 12 | Installation of Vertical Bored cast in situ RCC pilesin all types of soils, using Ready Mix Concrete of M30 grade, with sulphate resistant Cement, fine aggregate, 20mm and down graded HBGS jelly coarse aggregate. The rate includes cost of reinforcing steel, binding wire, fabrication, welding charges, placing of reinforcement cage in bore hole in correct position, cost of boring to the required depth with Bentonite solution with temprory casing of required length, conveyance of RMC to site and pouring concrete using Tremine pipes, conveyance of all materials to the site including all tools and plants, shifting the plants and equipments from one point to another, excavation of mud pits for circulation of Bentonite solution, closing the mud pits to original level and mud removal with initial lead and lift but including dismandeling the concrete above the cut off level etc complete as directed by the departmental officers including socketing. The reinforcement cage should be welded properly for lifting. The concrete cubes to be tested as per IS 456-2000. Acceptance criteria by clause 16.1. Frequency of testing should be as per clause 15.2.2. The length of pile for payment shall be measured up to natural ground level. The work should be carried out as per IS 2911. Pile depth should be decided by the departmental office at site. |
| 13 | 450mm dia pile - having longitudinal reinforcement of 10Nos of 16# with helical reinforcement of 10# @ 200mm c/c with inner rings of 12mm dia @ 1000mm c/c with lifting hook of 12 mm dia required depth. |
| 14 | Installation of Verticalbored cast in situ RCC piles of basic length 20 RMin all types of soil with M30 Grade using Ready Mix Concrete (Sulphate resistant Cement), Supply and erection of reinforcement, shoe, fabrication, including cost of binding wire, cutting, tying, welding and placing the reinforcement cage in correct position, driving and removing the temporary casing pipe of full depth, shifting the plant and equipments from one point to another, carryingout any ancillary work adjacent to piling work, trimming the concrete above cutoff level, cleaning the debris and levelling the site etc, as directed by the Departmental Engineers.The Rig capacity,height of Towerand length of casing pipe etc., must be adequate to take care of change in soil profile. The length of pile for payment shall be measured from top of shoe to the bottom of the pilecap.Testing of Concrete as specified in IS 456/2000 acceptance criteria as per clause 16.1. Frequency of testing as per 15.2.2. Testing to be conducted at both the ends at site as well as RMC plant. Pile driving depth should be decided by the departmental officers at site. |
| 15 | 600mm dia pile - having longitudinal reinforcement of 8 Nos of 20#with helical reinforcement of 10# @ 200 mm c/c with inner rings of 12 mm dia @ 1000 mm c/c with lifting hook of 12 mm dia required depth. |
| 16 | Initial Load Test as per IS 2911 Part IV 1985 including cost of single pile (250% of pile capacity), labour, reinforcement charges and all other incidential charges including excavation, shoring, strutting, dewatering etc. as necessary hire charges for jacks, measuring devices, Structural Frame work for platform, Kent ledges etc, as required and providing pilecap. |
| 17 | 450mm Dia pile |
| 18 | 600mm Dia pile |
| 19 | Routine load test as per IS 2911 part IV 1995 (150% of pile capacity) including labour charges for jack, measuring devices, structural frame work plot form, kent ledges etc., as required and as directed by the departmental officers etc. complete complying with standard specification. |
| 20 | 450mm Dia pile |
| 21 | 600mm Dia pile |
| 22 | Boring, providing and installing cast in situ single under reamed piles of specified dia(400mm) and length below pile cap in cement concrete piles with mix Cement Concrete M30 grade for all RCC items of worksto carry a safe working load not less than specified excluding the cost of Steel reinforcement but including the bentonite solution, machineries and labour charges etc complete. |
| 23 | Earth work openexcavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 24 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 25 | upto 2m depth |
| 26 | From 2-3m depth |
| 27 | From 3-4m depth |
| 28 | From 4-5m depth |
| 29 | From 5-6m depth |
| 30 | Shoring, and strutting with sheet piles of size width 400 mm x height of 3m x thickness of 9mm as per IS 2314-1986 by driving on both sides of the trench from Ground Level up to the required depth and connecting the above sheet piles by horizontal strutting with sheet piles at an interval of 1.0m, fixing the sheet piles by connecting the horizontal strutting with casurina poles of 8cm to 10cm dia. at 1.50m interval and including removing the sheet piles after the pipelines are laid, jointed, tested, and stacking it safely for other uses. It includes the cost of sheet piles and casurina poles including labour charges for erecting the sheet piles, driving the sheet piles, removing the sheet piles, fixing Casurina poles, etc., complete and all other incidental charges for the depths (i) 0-3mts.,(ii) 0-4mts.,(iii) 0-5mts., (iv) 0-6mts.,(v) 0-7mts. and (vi) 0-8mts. |
| 31 | 0-8mts depth |
| 32 | Supplying and filling in foundation, basement, etc with filling m-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 33 | Supplying and filling in foundation, basement, etc with Conveyed Gravel in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 34 | Supplying and laying of SandGravel Mix in ratio 1:1 for each layer laying of 15 cm thick using 0.631 m3 of sand fo filling and 0.675 M3 of red gravel of 1m3 of volume including cost of sand gravel mix including labour charges for mixing , laying compaction all tools and planks employed etc., complete complying with standard specification and as directed by the departmental officers |
| 35 | Supplying, spreading and mixing red earth, sand and farm yard manure mixer with required base of chemical for control of pest and disease like Neem cake and carbo furedenand fertilizers for root regulator like DAP, Urea and superphosphate and for mind the mix cost of red earth sand, fertilizers and labour charges etc., complete directed by the Departmental Officers |
| 36 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 37 | Supplying and filling with conveyed earth in layers of not exceeding 30cm thick, well rammed and consolidated including watering using power roller by hire basis etc.,The rate is conveyance charges, loading and unloading , refilling charges and hire charges for power roller machine etc., complete complying with standard specification and as directed by the departmental officers. |
| 38 | Supplying and filling inbasement with Crushed Stone dust in layers of not more than 15 cm thick, well rammed watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 39 | Supplying and filling the Hemalite using the one bag of cement and three bags of Heamalite including mixing the same and conveying followed by laying including Labours, material charges and Trasportation charges,etc, complete complying with standard specification and as directed by the departmental officers |
| 40 | Ground Floor |
| 41 | Third Floor |
| 42 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 43 | Providing an additional prop support using 40mm first class M.S. pipe for the slab while dismantling of the connected RCC structure and the props should be placed in an interval of 1.20m centre to centre. The props is placed in order to withstand the vibration while dismantling the connected structure etc., complete complying with the standard specificaiton. |
| 44 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supportedby casurina props of 10cm to 13 cm dia spacedat not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall begiven after the concrete is laid) |
| 45 | For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. |
| 46 | For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. |
| 47 | For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. |
| 48 | Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers. |
| 49 | Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m") 7670 kg. of sand, but excluding cost of reinforcement grill and fabricatingcharges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 50 | Foundation & Basement |
| 51 | In Ground floor |
| 52 | In First floor |
| 53 | In Second Floor |
| 54 | Providing and laying in position, Standardised Concrete Mix M-35 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 425 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m") 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 55 | In Ground floor |
| 56 | Providing vaccum dewatering in fresh concrete works 80 to 120mm thick by levelling with double framed screed vibrator finishing with power floatter and power trowel and indentical works etc., complete and as directed by the departmental officers. |
| 57 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 58 | Post Tensioning Work: Designandexecutionofposttensioningwork,including decoiling, the strands, cutting to the required lengths, supplying,layingofHTstrandssheathing(GIcorrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply ofstressinganchorages,suitablefor5-5&5-4tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc. |
| 59 | (Shuttering, concreting & reinforcement steel shall be paid under respective items) at allheightsincludingallleads,lifts,coordination,withthe post- tensioningagency,preparation ofdrawings, obtaining approval from the Employer / Architect etc.Rate to include providing water, power, cement and admixture for grouting, packingofsheathingandanchoragesblockings,fillingof recesspocketsafterstressingusinggrouts(cementslurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approvedand asdirected bythe EmployerArchitectbutexcludingshuttering,concreting& reinforcement steel which shall be payable under respective items separately. |
| 60 | Brick work in following Cement Mortar 1:5 (One cement and five sand) Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction. |
| 61 | For foundation & basement |
| 62 | In Ground floor |
| 63 | In First floor |
| 64 | In Second Floor |
| 65 | Brick work inCement Mortar 1:5 using best quality II class table moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specification. |
| 66 | Ground Floor |
| 67 | Third floor |
| 68 | Brick partition walls of 11cm thickness using Fly Ash Bricks of 230 x 110 x 70mm size in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 69 | In Ground Floor |
| 70 | Reconstruction of Autoclaved Aerated Concrete (AAC) Blocksin CM 1:3, using AAC Blocks of size 600 mm x 200 mm x 200mmconform to IS 2185-1984in CM 1:3 , having compressive strength of 35 kg/ cm2, dry density 550-650 kg/m3, wet density 750-850 kg/m3 (approx.)including curing and neat finish etc., complete complying with standard specification and as directed by the departmental officers. |
| 71 | Ground Floor |
| 72 | Second Floor |
| 73 | Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 6313 Part I to IV in stages to suit the progress of work consist as per the detailed specification as below.(Measurements taken for the plinth area for the purpose of payment) including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing, etc,complete and as directed by the departmental officers.(The chemical should be got approvedby Executive Engineer before use on work). |
| 74 | Stage-1: Spraying anti-termite chemical solution for the foundation before laying concrete, in bottom and sides of foundation.Stage-2:Spraying anti-termite chemical solution to the grade beam level, spraying has to done for the grade beam, brick masonry contact with the back fill earth. Stage-3: Spraying anti-termite chemical solution on the sand for the flooring before laying the flooring concrete.This treatment has to be carried out on the sand filling by making holeswith crow bar to a depth of 60cms and at 60cms intervals on both direction and at junction of wall and flooring thoroughout.Stage-4: Spraying anti-termite chemical solution alround building outside by making holes through bar before laying plinth protection and the holes to be closed after the treatment |
| 75 | Providing post constructional anti termite treatment by drilling 1/2" dia holes at uniform intervals of 12" at jeneture of the building and the Chemical ALDRIN (0.50%) will be walls and floors to a depth of 4" to 5" inside the building and the Chemical ALDRIN (0.50%) will be quirilled inside these hole leg using hand presure pumps from its fills to it refusal. The wooden frame will be spread by the same termicide solution center pheriphery of the building will be treated by making a sall chanal around the building and the hole s are to be made by using crew bar termicide (ALDRIN) to be squrilled inside these holes after completion of treatment all holes drilled in the walls and floors closed by cement. |
| 76 | Supply and application ofpre applied system, integratedwater resistance cell in combination with catalytic effectivehydrophilic mechanism for basement footings, raft & liftpit etc. the product should be conforming higher compressive strength to class R3 & R4 category. Effective transformation of the concrete structure in to barrier irrespective of thickness & no requirement offurther waterproofing system or system protection & to crerate durable concrete structure by extending the service life of the structure being resistance to up to 20 bar hydrostatic water head pressure & permeability reduction more than 97%when compared with control concrete as per DIN 1048 Part 5 and ACI 212-3R-10-16, conforming to the Valenta /Darcy"s formula & self healing up to 0.5mm cracks through out the service life of the concrete by dosing @ 0.8% by weight of cement / cementitious materials. Supply and apply of penetron slurry one coat on the raft areas. The admixture must have the approval from EPD, MORTH and IRC for durabilityfactor with CE |
| 77 | Supplying and laying of 120 GSM Geo Fabric for protecting the Cured membrane in exposed area. (The materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification). |
| 78 | Water proofing treatment in RCC Wall: Supply and application of Whitetank© system, integrated water resistance cell in combination with catalytic effectivehydrophilic mechanism for basement footings, raft & liftpit etc. the product should be conforming higher compressive strength to class R3 & R4 category. Effective transformation of the concrete structure in to barrier irrespective of thickness & no requirement offurther waterproofing system or system protection & to crerate durable concrete structure by extending the service life of the structure being resistance to up to 20 bar hydrostatic water head pressure & permeability reduction more than 97%when compared with control concrete as per DIN 1048 Part 5 and ACI 212-3R-10-16, conforming to the Valenta /Darcy"s formula & self healing up to 0.5mm cracks through out the service life of the concrete by dosing @ 0.8% by weight of cement / cementitious materials. The admixture must have the approval from EPD, MORTH and IRC for durabilityfactor with CE approval and supplied from a CE approved manufacturing unit and must be capable of reducing chloride duffcussion coeeficientby more than 45% as comapred to control concrete, when tested as per ASTM C1556. The Whitetank© System should be carried out in 3 different necessary stages including use of Ultrasonic pulse velocity (UPV) equiptment to identify & create honeycomb free concrete structurebefore prceeding to post construction treatment as a process of treatment conforming Whitetank© system & manufacturer"s specifications as detailed intechnical specification, complete. Workshall beguaranteedfor10years againstanyleakages & permanent system performance. The joint warranty shall beprovided with manufacturerwith sole responsibility for the performance of the system on Rs.100/-stamp paper inapprovedpreformed. Make:- Penetron India. Retaining walls (Penetron coating with consumption of 1.4 kg/sqm in two coats )(Single coat @ 0.7kg /Sqm/coats) |
| 79 | Water proofing treatment in RCC Wall: Surface Preparation : Preparing the surface (RCC wall) to ensure free from dust, Greece, oil, water, or any unwanted partials, minor repairs using mortaror PU sealant, Construction of Hunching at junction Providing and installing of cracks /construction/ cold joints in slab, slab & wall junctions &in other areas of the slab with Catalyst Crystalline repair mortar by using Catalyst Crystalline Penecrete Mortar & finishing coat of Penetron over all treated areasWaterproofing Coating; Supply and applying of Single Component, UV Resistant, High Quality Solvent free PU based Elastomeric Liquid Coating “FLEXIMAXX PU-1K” of BITUMAT complying with ASTM C836-95, having Crack bridging property of 3.4 mm, Tensile Strength 480 N/cm2 as per ASTM D412 with Elongation >440% , Adhesion to concrete of 72N/cm^2, Shore A Hardness >68 as per ASTM D2240, |
| 80 | Applying Primer Coat + 2 Main Coats of FLEXIMAXX PU-1K with a minimum l coverage ofApprox., 1.4kg to 1.5Kg per Sqm with theminimum reinforcement 4 inch width strip of 40 -60 GSMgeofabric of non Wowen fabric of 100% Polyester staple fibers, mechanically bonded by a needle punching process and then thermally set to produce a dimensionally stable network with elongation break of 40%, Mullen burst strength of 60 KpA, Tensile strength (CD) of 2N/mm2 as reinforcement layer between two main coats of Fleximaxx PU 1K and all overlapping and junctions.on typical locations like wall & floor junctionsect.. as per manufacturer"s specifications approved by Department officials. the treatment includes necessary treatment along the vertical surfaces and inverted beams up to 300mm & sprinkling of quartz sand over vertical surface applied PU coating when it is still wet for receiving protection plaster on it. (The materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification). |
| 81 | Clearing surface thoroughly with water and removing any loose plaster, flacks, fungus growth etc., by suitable mechanical means like scrapping or wire brushing and washing with adequate water to get and absolutely cleaned surface to take up further treatment. Then coating the exposed rods of beams and columns with “Nitro Zinc Prime base + Nitro Zinc Prime hardener” at 2.10 lt/10m2 and mixing the mortar with nitro bond SBR 3 liters per bag of cement finishing the columns and beams neatly with the above cement, chemical treatment with fine sand in the ratio of 1:3, 20mm thick including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 82 | Providing and laying hot applied thermo plastic compound 2.5mm thick including reflectorising glass beads @250gms per sq.m area, thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc., complete as per MORTH specification No.803 and as directed by the departmental officers. |
| 83 | Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 84 | Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 85 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 86 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 87 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 88 | Providing two legged pipe scaffolding using 40mm first class M.S. pipe including fixing cross bracings, couplings, EJP couplers for cross bracing and base plates including erection of scaffolding, conveyance charges, loading and unloading charges and dismantling after completion of the work and removing from the site etc., as directed by the departmental officers. |
| 89 | Hire Charges for View Cutter arrangements using PPGI Sheet with necessary steel post and bracings of required height. The material should be of PPGIapproved design 0.56mm thick 24 gague having width 1050mm.The sheet should be G.I base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws. The sheet to be fixed with making suitable corrugated cutting the sheet in to the required size as per the site condition and as directed by the deptl.officers. |
| 90 | Hire charges for mobile scaffolding with stairway of Size : LxW 6.5 feet x 5 feet Platform of height 2.5 meter . As per specification : All pipes are made up of Aluminium alloy HE 30 grade T6 temper. JINDAL/ HINDALCO MAKE. Step made up of 50mm OD 2.5mm thickness. H frame Height 2000mm Width 1500mm Cabin Height 1000mm Width 1500mm Platform size 580mm x 1690mm With aluminum chequred sheet Hand rails / Horizontal Bar / Diagonal Bar Dia 50mm x 2.5mm thickness GI “U” Clamp, Nylon wheels with foot brake system, Outer Trigger for four side corners (if necessary) Non slip, extra grip flat corrugated mullion steps. High Quality Leg Grip chequred sheet for top of the platform (Plywood / Aluminium) Maximum Working Load: 300 kg |
| 91 | External area special coating works in all cracks to be treated with suitable respire mortor also al old faded paint, blisters to be scraped with mechanical tools / machine and washing wit neatly. Providing a good waterproofing primer also providing a perfect elastomeric / anti carbon / waterproofing coating to be provided on the external walls. This exposed atmosphere coating will protect the structure from rain, UV Rays, Frost, Carbon attack, Saline attack etc., Suitable product MC EmceColor-Flex. |
| 92 | Existing pressed tiles and weathering course material should be removed either side 300 mm and Expansion joint in the parent RCC slab surface will be identified and will be cleaned either side and the existing Mastic Pad in the Joints will be removed to the required depth.Exposed joint will befilled with 25mm Ply or Thermocol sheet and the Non Shrink grouting material like GP-2 (Fosroc Chemicals) will be used in both side of the Joints to make the edges even.Joint faces will becleaned completelyto the minimum depth of half of the Joint or 25mm.In the cleaned Joint, required dia of (30mm or 40mm) "Poly Urethene Backer Rod" will be inserted into the Joint and Debonding tape will beprovided over the Backer Rod to close the openings alongside.The Joint faces will beduly primed by applying "Primer 20" (Fosroc Chemicals)Once, the primed area becomes touch dry, the Pourable "Polyurethene Sealant Colpor - 200" (Fosroc Chemicals) "Bostik" will be poured into the primed Joint to the top level of the primed surface.After the poured sealant gets set completely,Aluminium Sheet with thickness of 1.5 mmto the required length will be anchored by using the Polyester Resin in one side of the Joint surface to protect the Sealant.The rate includes of labour, Materials , transport , conveyance and other connected civil works. |
| 93 | Laying of Screed Concrete using Cemet concrete mix 1:2:4 (one cement, two sand and four hard broken stone jelly) using HBGS 6-10mm ISS metal for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 94 | Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 95 | Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed. |
| 96 | Expansion Joint Treatment at the Roof Level :Over the fixed Aluminium Sheet Weathering course and fresh Tiles has to be laid by maintaining the same gap 25mm in the Joint, again the required dia of PU Backer Rod will be inserted to the half of the Joint width and the Joint faces will be primed and the pourable sealant Colpor - 200 will be poured to the surface level.The rate includes of labour, Materials , transport , conveyance and other connected civil works. |
| 97 | Expansion Joint Treatment at the Vertical Roof Level : In the Vertical Joint, the existing material in the joints will be removed and the Joint Gap will be finished evenly with polymer modified mortar.Once the Joint is ready, the necessary dia of Poly Urethene Back up rod will be inserted the required depth and the Joint faces will be duly primed, once the applied primer is in tacky codition the Poly Sulphide Sealant "Anabond" will be appliedin the joint to the surface level .The rate includes of labour, Materials , transport , conveyance and other connected civil works. |
| 98 | Removing all Lossen particles in the concrete and dead mortars. Cleaning the corroded rods with metal brush and sand paper followed by application of rust removal allowing it for temp cure providing anti corrosive coating for the existing rods with zinc rich primer / Epoxy after completion of anti corrosive works based on the structural requriment providing new rods by anchoring by executing lockfits/polyster/vinylestser epoxy grouters. After completion of rebar works applying complete bonding agent for the old reinforcement rods/new reinforcement rods and the concrete areas. Bonding agent-Epoxy SBR,Supplying and appilication of microconcrete 20mm to 25mm in the concrete areas, Allowing two days curing period. finally, Finishing with OPC cement, river fine M-Sand, Mixing with SBR latex curing for 5days. |
| 99 | Preparation of existing RCC surface by removing the loose concrete with the help of Small chisel and hammer cleaning the exposed concrete surface to remove any Fungus loosely particles scales by stiff wire brush Clean by water wash the entire surface cleaning the exposed corroded steel surface by a stiff wire brush clean by water wash make the surface prepared to receive further treatment. Repairing the existing corroded steel by polymer anti corrosion treatment carefully removing loosely held rust particles, scales, by a stiff wire brush, apply a “Rust off” to remove runt thoroughly, allow over night reaction of rust removal, after that clean the surface Gal Tech Hiband epoxy by water prepare polymer anti corrosion solution by mixing one part, cement two part, add required water to get slurry consistency to workable, apply by brush on cleaned steel along with entire concrete surface, allow to air cure over night Sprinkle water cure on next day only. Providing and applying polymer protective coat on top of RCC surface at an average thickness of 12 to 15 mm in exact line and level in the proportion of 1:4 cement and sand mortar by manual mixing, with addition of water proofing chemical 150ml and Harbourite 12mm fine fibrillated 100% virgin polypropylene fibres at 150gm per bag of cement including curing for atleast 7 days |
| 100 | Guniting the existing RCC Surface with minium thickness of 50 mm , involves of specialized nozzle to project the dry material onto the surface with high velocity and compressed pressure, water is added to the nozzle to facilitate the application process, resulting in a mixture of water and dry material that is sprayed onto the surface. The Minimum average compressive strength of gunite should be at an average of 17.24 MPa after 28 days gunite shot and the strength of gunite will equal or exceed 14.65 MPa ( 85 %) of the designed strength and not less than (75 %) 12.93 MPa after 28 days. The rate includes of labour, material , machinery, and conveyance charges |
| 101 | Providing granolithic floor finish of the 50mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) |
| 102 | Paving the floor with best qualityDouble charged Vitrified Tiles of size 800 x 800 x 10mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 103 | Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 104 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise andsimilar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 105 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Granite slabs (super fine polished with machine cut edges )Jet black andsimilar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 106 | Flooring with Self design Joint free rectified Ceramic Tiles ofsize 305 x 305 x 8mmlaid over 20mm thick cement mortar 1:3 (Onecement and Tree sand) base mortar over the existing slab / floorincluding cutting the tiles to the required size with special cutterwherever necessary, laying in positionand and pointing with whitecement mixed with colouring pigment at the rate of 0.3 kg. / sq.m.etc., complete complying with standard specification. (The makeand brand of the tiles should be Johnson / Kajaria / Somany / Nitco/ RAK or Equivalent which has to be got approved by executiveEngineer before use on works) |
| 107 | Dadooing walls with Joint free rectified Colour designed digital print ceramic tiles, with borders, with size of 300mm x 600mm x 10mm and above setin Cement Mortar 1:2 (One Cement and Two sand) 20mm thick andpointing the joints with white cement mixed with colouring pigmentsat the rate of 0.40 Kg. / sq.m. nbatly in all floors, curing, etc,,complying with standard specification and as directed by thedepartmental officers. (The make and brand of the tiles should belike Johnson / Kajaria / Somany / Nitco / RAK or Equivalent whichhas to be got approved by Executive Engineer before use on works) |
| 108 | Dadooing walls with Joint free rectified Colour designed digital print ceramic tiles, with borders, with size of 300mm x 450mm x 8mm and above setin Cement Mortar 1:2 (One Cement and Two sand) 20mm thick andpointing the joints with white cement mixed with colouring pigmentsat the rate of 0.40 Kg. / sq.m. nbatly in all floors, curing, etc,,complying with standard specification and as directed by thedepartmental officers. (The make and brand of the tiles should belike Johnson / Kajaria / Somany / Nitco / RAK or Equivalent whichhas to be got approved by Executive Engineer before use on works) |
| 109 | Paving the floor with pre-polished concrete anti-skid tiles of size 305 mm x 305 mm of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 110 | Paving the floor with colour ceramic tiles of approved quality, colour Tack tile is longer design and button design landing/ identified portion of floor tile size is 305x305x14.5mm thick. of approved make, quality and colour in all floor over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid with out any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmntal officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work . The material should be a make of Johnson Endure make New Tek BT Yellow or equivalent. |
| 111 | Paving the floor with best approved quality fine Special Stone Slabs - Semi Polished with Machine Cut Edges of all sizes of 40 mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The Special type of stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification. |
| 112 | Supplying and Fixing the Mangalore tile laying Roofing over the Flat tiles with steel purlins of size 50 mm x 25 mm with spacing of 300 mm c/c laid above the steel purlins of required size as per the site condition and the mangalore tile and flat tiles should be of best and aprpoved quality etc., complete complying with standard specifications and as directed by the departmental officers. |
| 113 | Providing grooving to granite slab at the intermediate edges of the vertical face with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete |
| 114 | Providing semi nosing to granite slab at the edges of the vertical space with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete |
| 115 | Providing and Fixing of PVC Trims (Corner beeding) at the outer corner profiles of the tiles including cost of material, labour and handling etc. as directed by departmental engineers at site of work and as per standard specification. |
| 116 | Hire Charges for Vibratory roller for Compacting the site including hire charges for Fuel, Labour etc., complete complying with standard specification and as directed by the Departmental Officer. |
| 117 | Cladding the Vertical Wall Surface with Best Approved Granite Stone Slabs of JET BLACK colour of Size 1200 X 600 of 18/20 mm thick with machine cut edges laid over a Cement Mortar bed of 10 mm thick using Cement Mortar 1:2 ( One Cement and Two Sand ) fixing the slabs with required cement lurry and laid in true right angles with minimum possible width joints and poiting the joints with white cement mixed with matching colouring pigments etc., The Granite stone slabs and other materials to be used shall be got approved by the Executive engineer concered before use on work etc., Complete as per standared specification. |
| 118 | Paving the top of roof with one course of Solar Reflective ceramic tiles of size 305x305x7mm of approved quality set in cement mortar 1:3 (one cement and three sand) 12mm thick mixed with Epoxy packing conforming to ISS including curing etc., Complete complying with standard specification and as directed by the departmental officers. |
| 119 | Finishing the top of slopped roof, sun-shade with Machine Pressed Ornamental Tiles of 12mm thick of approved quality laid in cement mortar 1:3 20mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same red oxide mixed mortar etc complete, complying with standard specifications |
| 120 | Providing the Bell mouth Opening at the collection point of downfall pipes at the terrace level, fixing the steel gratings of size 300 mm x 200 mm at the collection point, finishes with the plastering in CM 1:5 and applying the polymer modified epoxy powder grouting material on the finshed surface etc., Complete complying with standard specification and as directed by the departmental officers.The labour includes labour, materials, cost of the steel gratings, finishing charges and application of chemical coat |
| 121 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong lockingsystems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work |
| 122 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI 1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 5.50mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 123 | Supplying and fixing of M.S. grill of approved design for open courtyard, grill, grill work to doors and window openings etc.,using necessary mild steel flats for inner and outer members which should be fixed on edges including cutting the members, welding, grinding, one coat of priming coat using best approved quality red oxide primer,dismantling of walls /concrete if necessary, fixing and finishing the dismantled portion to original condition etc., complete complying with standard specification. |
| 124 | Supplying and fixing with new mild steel hollow pipes/ purlins / Hollow section M.S. Posts/ M.S. Pipes of approved quality and brand including labour charges for cutting and welding with requiredsize an complete complying with standard specification and as directed by the departmental officers |
| 125 | SupplyingandErectingGear Operated Type Rolling Shutter / GrillswithISImakeofapprovedsizeandsection using 18 GI sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc |
| 126 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc complete complying with the standard specification. |
| 127 | Supplying and fixing Teak Wood frames for doorsWindows and Ventilators using required MS angles, flats and rods of approved design and as directed by the departmental officers including cost of MS Grills, labour charges and cost of one coat of red oxide primer with labour charges for priming coat etc. complete complying with standard specifiction. |
| 128 | T.W Scantlings above 2m below 3m |
| 129 | Providing Teak wood wrought and put up for Doors and windows and any other similar joinery works including cost of Seasoned Teakwood for Scantling and Planks for Heritage Worksand labour wrought & put up etc., complete complying with standard specification and as directed by the Departmental officers. |
| 130 | Supplying and fixing alround door frames and shutter styles using T.W scantlings and door planks using T.W planks of 40mm thick including labour charges fixing and with necessary furniture fittings.etc complete complying std. specification. |
| 131 | Supplying and fixing in position of SolidCoreFlushShutterswithteakplyonbothside with teakwook lipping alround 35mm thick block board core with of applied shade and hot pressed bonded with liquid phenol formaldluide resin with internal lifting with TW as per IS 2201/ part I /1991 The rates inludes the labour charges for fixing the shutter to the frames and for fixing furniture fiitings.The rate include the cost of furniture fittings etc complete |
| 132 | Single leaf |
| 133 | Double leaf |
| 134 | Supplying and fixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification. |
| 135 | Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., |
| 136 | Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of ("U" channel of size 29 x 9, 1mm, 150mm long) -3 Nos. at hinge point, frame reinforcement of ("U" GI channel of size 46 x 22 x 0.6mm), bottom tie rod of ("U" GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work |
| 137 | Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm -2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges -3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work |
| 138 | Supplying and fixing fine polished cuddapah slab for of 38/40mm thick for cupboard arrangements including laying correct alignment etc., complete complying with standard specification and as directed |
| 139 | ProvidingCup-boardShutterusingtermite/waterproof plywoodof19mmthickoverwhichlaminatedsheetof 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood,laminatesheetandothermaterials shouldbe got approved from the Executive Engineer befoe use on work. |
| 140 | Supplying and Fixing of Wooden Acoustic Door 2400x2100 mm, Single Leaf 50 mm thk with Acoustic Infill 1 SGL Rbt teak frame 120 x 65 mm frame profile with anchor fastners,Laminate shade, finish as per consultants selection DORMA SS Ball Bearing 4" X 4" X 3 mm Hinge For Steel Geze Overhead rack and pinion door closer GEZE TS 1000 C, EN 2/3 & 4 with adjustable closing speed and adjustable latching action. (TS 2000 DOOR CLOSER) 1 PER DOOR CLOSER) 1 PER DOOR SS Deadlock with 70 mm Back Set and 24 mm forend, Euro Profile Cylinder with ONE side key, 24 SS Strike plate,escutcheons 1 PER DOOR, DORMA D-Pull Handle SS 19 x 300 mm, Acoustic Seal GasketPackage D50 -6RMT PER DOOR LORENT Drop Down Concealed Cat 1, 911 - 1000 mm 1 PER DOOR conceled tower bolt 300mm long Installation charges |
| 141 | Supplying and fixing of FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers. |
| 142 | Supplying and fixing teak wood hand rails with an over all finsihed size of 50 x 150mm with architectural designs as directed and fixing in position etc., including polishing two coats with french (LAC) polish over a coat of bee"s waxing complying with standard specification etc., complete. The wooden hand rails shall have 12mm groove on both faces at 50mm from top polished and the groove should be painted with black paint. The bottom of hand rails should be grooved to receive the MS flats 40 x 6mm welded with square rods of balustrades |
| 143 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc.complete |
| 144 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade.The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete |
| 145 | Manufacturing,supplying and fixing of stainless steel of U shaped movable grab bar with hinges for accessible toilet using 50 mm dia pipe of 304 grade stainless steel pipe of 1.60 mm thick in required size of 750mm x 110mm.The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges,etc.,complete. |
| 146 | Manufacturing,supplying and fixing of stainless steel grab bar for accessible toilet using 50 mm dia of 304 grade stainless steel pipe of 1.60 mm thick in required size of 600mm long .The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges,etc., complete. |
| 147 | Manufacturing,supplying and fixing of stainless steel L shaped grab bar for accessible toilet using 50 mm dia of 304 grade stainless steel pipe of 1.60 mm thick in required size of 500mm and 700mm long .The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges,etc.,complete. |
| 148 | Manufacturing, Supplying and Fixing of GFRC Handrail of Overall height 1.00 m with bottom railing 140 mm ht., Top Railing 145 mm Height , balustrade of size 150 mm x 150 mm with height of 715 mm of approved design pattern with finished surface of primer, putty, and two coats of emulsion paint approved by the departmental officers. The rate includes of Manufacturing, labour, preparation ofmoulds, roughening, smoothening, painting, fixingand transport charges. |
| 149 | Designing the 12mm thick toughened glass panel work as per sketch with groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept Officials.) |
| 150 | Designing the 12mm thick Hinged Toughened Glass Doorwork as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept Officials.) |
| 151 | Supplying and fixing of HPL (High pressure Laminated) cubicle size 1.50 mx 1.20 m of thickness 12 mm with door system. The cubicle system held with fitting of SS-304 grade steel of clamps and fasteners approved manufacturer with HPL panel board having Design space sturdy range of HPL modular toilet cubicle that having extensive variety of colors, designsand sizes to suit the necessary requirements having approved equivalent brand make .rate inclusive of all materials such as SS spider fittings, labour, lead and lift, transport, wastage, accesories etc as directed by the deptl. officer |
| 152 | Supplying and fixing of HPL (High pressure Laminated) Urinal partition of size 1200 mm x 600 mmof thickness 12mm . The Indian Cubicle brand make of HPL panel boardwith fitting of SS-304 grade steel of clamps and fasteners having Design space sturdy range having extensive variety of colors, designsand sizes to suit the necessary requirements having approved equivalent brand make .rate inclusive of all materials such aslabour, lead and lift, transport, wastage, accesories etc as directed by the deptl. officer |
| 153 | Supplying and fixing of Modular partition- 75mm thick ,Fabricated out of exclusive Aluminum sections with the following Specifications,(a) All the aluminum sections will be of 1.8 mm to 2 mm thick i.e., depends on the load bearing requirement. (b) The top cover & end cover will be of 75 mm breadth. (c) The electrical raceway cover will be of 100 mm width & 9 mm thick pre laminated / laminated particle board. (d) The tiles will be provided on both sides of the frame. The tiles are fabricated out of 9 mm thick pre laminated board for tiles & MDF board for white marker board & Magnetic fabric board. (e) The two way, three way & Four way pillars will be fabricated out of 2 mm thick, 75 mm, Square Aluminum sections. (f) All the frames will be connected using bolt &nuts. (g) All the Aluminum sections will be duly powder coated in approved shade after necessary treatment. Table Top and Leg Pannel made of 25 mm thick postformed finish and above the table top 12mm thick plain glass of size 425mm (H) x 575mm(D) fixed with inbetween two work surface with necessary hardware accessories and having a keyboard tray and mobile pedestal one draw and one filing cupboard size : 450mm (W) x 450mm (D) x540mm (H) ( Each Size) 1050mm (W) x 600mm (D) x 1200mm (H) etc., complete complying with standard specification and as directed by the departmental officers. |
| 154 | Providing Fully Calcium Silicate HILUX Board partition using alu box section and aluminium frame at an interval of 0.75m at the aluminium frame of size 63.50mmx38.10mm x 1.28mm, 1.41 mm at 0.8158 kg/m with necessary L Angles, Screws, nails and fixed in the wall using drilling machine with neat straight alignment etc., after finishing the frame work and fixed with both side.12mm thick HILUX Board approved quality and ISI make with necessry screws nails, fevicol and necessary grooves as per instruction of the departmental officers and also cutting the partition for Electrical Switch Box and AC Plug Box and telephone box requirements and finally cleaning the partition for both side with neat postition, etc., The partition both side should be finished with bear wall putty and painting with two coats of plastic emulsion paint over one coat of primer including preparation of surface etc., The rate is inclusive of cost of materials, labour charges aluminium frame work and partition work, transporting charges, etc., complete as directed by departmental officers. |
| 155 | Supply and installation of79mm high, hard wooden flooring on stage Frame work shall be fabricated by using 50mm high x 50mm wide wooden battens fixed on the stage floor at 600mm centers in both directions, by using suitable fasteners. Contractor to co-ordinate with AV vendor and decide final height to conceal stage floor boxes.Resiltant air gap between floorand plywoodto be lined by using polyester woolhaving a density of 1000 GSM and 50mm thick19mm thick FR Grade high density BWP grade plywood is then fixed to wooden frame rigidly by using suitable fasteners and ensure proper level of the plywood surface and fixwood flooring having wooden finishof 10mm thick above 19mm ply Flooring to be provided with woodcorner profiles towards the edge of the stage along with 200mm high 15mm thick hard woodenskirting along the perimeterof the floor with 3mm foam underlay |
| 156 | Supplying and fixing of Stage back Black out pollster Curtain fabric of 280 Gsm including rate for material, Labour for fixing and stitch clear lining and transporting etc complete complying with standard specification material should got approved from Executive engineer at site. |
| 157 | Renewing and refixing the damaged broken twisted unserviceable Thermocole false ceiling with new one of "Gyp board false ceiling using 10mm thick Gypboard of approved quality design pattern and drops given by the deptl officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20mc/c on both longtitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longtitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the "GYPBOARD" on the panel provided as per design/pattern given by the deptl officers. And fininshingthe ceiling surface with same plaster of paris materials etc.Necessary openings should be could with Acrylic paint made for providing spot light, floursent tubes in the ceiling by using kit ply 12mm thick and openings should be std specfn and etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 158 | Supply & installation ofWall paneling using Salon Spots MP1 made of pinewood E1 grade fiberboard, with 1mm circluar micro-perforations in 2mm pitch, melamine laminated finish, 5-test fire retardant grade, size 600x1200x16mm, Square edge, volume density of base board 800Kg/m3, weight 12Kgs/m2 installed by using . Strut framework system and . Strut Z bar. . Strut framework system includes . Strut CC25 Cross Channel having thickness 0.55mm, length 3600mm, knurled web 35, depth 20mm and equal flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c.. Strut Z bar having40mm height, thickness 1mm is first fixed behind the panels by using suitable fasteners. Another length of Strut Z bar are then installed over Strut CC25 horizontally at spacing so as to match with Strut Z bar at rear of Spots MP panels. Spots MP panels of size 600x1200x16mm are then slided into the Strut Z bar fixed on Strut CC25. Long edges of panels should be perpendicular to . Strut Z bar and Short edges of the panel are staggered. Panels are backlined with . SynthPF 10x25 held in position with dab spots of . Stick S7 Fire (Class) – 1 & P Acoustics – NRC upto 0.85, Thermal conductivity (W/mk)– na, Climate (°C, RH) – 40, 70, Light reflectance (%) – Colour Dependant,Green (VOC, RC %) – Low, 25 |
| 159 | Supply and installation of Wall paneling using Stretch Dekor Grafix system consisting of FR Grade,customised printed fabric-based membrane with high-performance Polyester core and acoustically printed surface finish size 1.4mx75m, stretched by using combination of . Strut CC50 Cross Channel and . Strut FS15 Tracks, . Strand1 primer, 12mm woodenbase, . SynthPF 10x25 infill with requisite accessories.First framework on wall to be erected by contractor (framework not by .) so as to achieve desired profile and finish level as per arch dwg. Wooden base 12mm is then installed on framework behind along the marking lines with metal fasteners at 300mm centres. FE15 tracks to be installed on wooden base, by first applying Stick S7 adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centres on one/both sides of . Strut Tracks. . Strand1 primer, square edge, magnesite bonded pinewood fiber panels of size 600x1200x20mm having density 400kg/m3, weight 6kg,GreenPro certified, is fixed to framework behind inbetween tracks by using suitable fasteners. SynthPF 10x25mm is adhered.Strand1 primer by using dab spots of . Stick S7 adhesive. This completes the substrate to receive the Stretch Dekor Grafix acoustical fabric.The . Stretch Dekor Grafix acoustical membrane of width 1.4m is stretched and tucked into the . Strut Tracks and secured to the locking jaws with purpose-specific tucking tools to obtain smooth, taut, wrinkle-free finish. Ensure minimum 5mm airgap is maintained inbetween SynthPF and Dekor fabric. Ensure the weft and weave of the fabric along with the surface are all oriented in one direction to achieve uniform shade.Note: Minimum 100mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300mm Note: Adjacency printing for larger images across mid-seam tracks is possible. Alignment of fabric is vital!B14 Technical ParametersFire (Class) – 1& P, Acoustics – NRC Upto 0.75, Thermal conductivity (W/mk)– 0.07, Climate (°C, RH) – 50, 90, Light reflectance (%) – Print dependant,Green (VoC, RC %) – Low, 25 |
| 160 | Supply and Installation ofWall paneling using Strand Ebony, Square edge Magnesite bondedpinewood fibre core tiles of size 600x1200x20mm, density 400 kgs/m3, weight 10kg/m2installed by usingStrut framework system with non-visible fasteners usingStrut H-Spline. The Strut framework systems includesStrut CC50 Cross Channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 50mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c.Strut H-Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 Cross Channel at 600mm centers. The Kerfed edge panels shall be then inserted into the Strut H-spline along their long edges of 2400mm against framework to perfect fit with staggered short edges. The system is backlined with the acoustical infillSynthPF 10x50 . Technical PArameters • Fire (Class) – 1 & P: • Acoustics – NRC 0.87 (For 15mm thk C50 Mounting):• Thermal conductivity (W/mk)– 0.08 • Climate (°C, RH) – 50, 90: • Light reflectance (%) – Low light reflectivity: • Green (VOC, RC %) – Low,30 |
| 161 | Supply and Installation ofFalse Ceiling using Mat Ebony, square edge, Magnesite bonded pinewood microfibre core pigmented ceiling tiles of size 595x595x15mm, volume density 600Kgs/m3, weight 9kg/m2 which is suspended by using 0.3mm thick . Skelet Trelis T24 Ebony metal grid system.. Skelet Trelis T24 Ebonymetal grid system of 600x600mm module includes . Skelet WA24B30 wall angle with equal flanges of 24mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the . SkeletMT24B36 MainT with flange width 24mm, height 38mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. . Skelet CT24B12 CrossT with flange width 24mm, height 32mm and length 1200mm is interlocked into the pre-cut slots in the Main T24 at 600mm centers in the perpendicular direction to the Main T24. Finally . SkeletCT24B06 CrossT with flange width 24mm, height 32mm and length 600mm are interlocked into the precut slots in the CT24B12 CrossT in direction parallel to the Main T24 to result in 600x600mm module. . Mat Ebony of size 595x595x15mm shall be placed into the grid size of 600x600mm. Technical Parameters Fire (Class) – 1 & P, Acoustics – NRC 0.74 (For 15mm E300 Mounting), Thermal conductivity (W/mk)– 0.1, Climate (°C, RH) – 50, 90, Light reflectance (%) – Low Light reflectivity,Green (VoC, RC %) – Low,35 |
| 162 | Supply and Installation of false ceiling Strand Nubby, square burled edge, magnesite-bonded pinewood fibre core, factory laminated texture finish, ceiling tile of size 595x595x15mm, volume density 400kgs/m3, weight 6kg/m2 which is suspended by using 0.3mm thickSkelet Trelis T24 ceiling grid system.Skelet Trelis T24 ceiling grid system, of 600x600mm module includes Skelet WA24W30 wall angle with equal flanges of 24mm, length 3000mm,0.4mm thk, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centres. Then suspend the SkeletMT24W36 MainT with flange width 24mm, height 38mm and length 3600mm, from the soffit slab with help of anchor bolt, soffit cleat and wire rod with leveling clip at 1200mm centres. Skelet CT24W12 CrossT with flange width 24mm, height 32mm and length 1200mm is interlocked into the pre-cut slots in the Main T24 at 600mm centers in the perpendicular direction to the Main T24.Finally SkeletCT24W06 CrossT with flange width 24mm, height 32mm and length 600mm are interlocked into the pre-cut slots in the CT24W12 CrossT in direction parallel to the Main T24 to result in 600x600mm module. Strand Nubby, square burled edge, of size 595x595x15mm shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The System is backlined with synth PF 5X50mm Techncal Parameters Fire (Class) – 1 & P, Acoustics – NRC 0.8 , Thermal (W/mk) – 0.07, Climate (°C, RH) – 50, 95, Light (%) – 85%,Green (VoC, RC %) – Low,30 |
| 163 | Supplying and Installation of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies. (For Rear Curtain) Size: 22Mtr x 7 Mtr. |
| 164 | Supplying and Installationof Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies .(For Frills) Size: 19Mtr x 1.2Mtr. |
| 165 | Supplying and Installationof High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:22Mtr x 7 Mtr. |
| 166 | Supplying and Installation of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing.(For Wing)7Mtr x 1.2Mtr |
| 167 | Supplying and Installation of On Stage Fixed Frill Bar 19Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free |
| 168 | Supplying and Installationof On Stage FixedValance Bar 21Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free |
| 169 | Supplying and Installation of Fixed Wing Structure designed as per site condition for a height approx .7Mtr x 1.2Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. |
| 170 | Supply, Installation & Providing of auditorium tip - up recliner chair of center to center 533mm,1020mm height, Plywood (hardwood) with induction heating and high pressure pressed. ABS moulded housing for seat & back cushions,armrest made of PP/PPCP/ABS or semi rigid PU foam. Polyurethane injection moulded flexible foam seat and back density 50 – 55 kg/m3, Fabric to be 100% polyester synthetic fabric with 4 mm polyurethane foam lamination.Fire retardant standard ISO3795, FMVVSS302, Water repellent -Standard -AATCC193. Torsion spring/spring steel IS:4454 1981 Grade III. HRCA/CRCA Sheet metal IS:1079 1994, Electrostatic epoxy powder coating thickness:70 - 80 microns. Seat numbering at side of the chair with LED lights on sides along with aisles.The chairs should be installed to the flooring with the anchor fasteners 12mmx100mm pin type. Fabric colour to customer choice. |
| 171 | Supply and installation of wooden proscenium in front of stage,Proscenium frames are fabricated by using Aluminum tubular section of50x 25 x thick fixed to form a square grid of size 600 x600mm. Proscenium width shall be minimum 600mm (walls) along the sides and minimum of 3" - 4" drop from the stage false ceiling Frames are grouted to stage floor/wall by using suitable fasteners. Resultant air gap between two panels to be lined by using polyester fibre rolls of size 600mm width having a density of 1000 GSM and 50mm thick . Proscenium frame is then covered with . Anutone Salon Spots MP1 made of pinewood E1 grade fiberboard, with 1mm circluar micro-perforations in 2mm pitch, Finishing from both sides of aluminum section. |
| 172 | Supply and installation of 98mm thick Tufbloc magnesia drywall partition system (having high water & fire resistance) which includes two layers of Anutone Tufbloc Square edge of size 1200x2400x12mm and 1200x2400x12mm having density 1000kgs/m3, weight 12 & 12kg/m2 fixed on the either side of GI strut channel framework.Framework includes Floor/Head (FC50) channels having thickness 0.55mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Noise and fire rated silicon sealant to caulked along the perimeter of the partition frame before fixing channels. Then Stud channel (SC48) having thickness 0.75mm, length 3600mm, unequal flanges of 34/36mm and web of 48mm should be placed into the floor/head channel positioned verticallyat 600mm centers. Extra reinforcement to be provided at openings (doors, windows, etc)Anutone Synth PF having thickness 50mm, width 600mm, density 1000gsm filled between the Studs and held in position by using chicken wire mesh/cross bracings/pasting on one side of the boards. The first layer of Anutone Tufbloc 12mm thick should be fixed on one side of the Stud framework in a staggered (ashlar or brick) patternby using suitable metal fasteners at 300mm centers. Another layer of Anutone Tufbloc 12mm thk should be fixed over it in staggered pattern with suitable metal fasteners. Edges of the two layers of boards must not coincide. Same procedure to be followed on other side of the framework to give 2 layers on either side of framework. 4mm gap should be maintained between boards on all sides. 4mm gap to be filled by using Anutone seam kit as per recommendations.Installed partition system is then sanded, smoothed, primered androller finished by using water based emulsion paint of approved colour, technical Parameters Core - Magnesia Fire – upto 150 minutes Acoustics – STC upto 44-50 Climate (OC RH) – 50, 99 Termite resistance – YesMoisture Absorption - 6.8% after 2hrs and 11.3% after 24hrs soakingWet Expansion - < 0.02% from ambient to saturationDry Contraction - =0.02% from evaporation Moisture Movement - 0.02% Light reflectance – 80 % Green (RC %) – 30 Hygiene (VoC, Clean room) – Low, Class 1 Strength - Antisag Impact - 4kg hammer 175mm |
| 173 | Supply and Installation ofFalse Ceiling Tufbloc HDFR, square edge, magnesia cement core panels of size 1200x2400x10mm, density 1000kgs/m3, weight 10kg/m2, installed by using Strut ceiling framework.TheStrut ceiling framework system shall include Strut WC25 Wall channel, fully knurled, sectional thickness 0.55mm, length 3600mm, unequal flanges of 20 & 30mm and web of 25mm, fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then suspend Anutone Strut MC45 Main channels, fully knurled,sectional thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the soffit at 1200mm centers with Anutone Strut SA25, fully knurled, Suspender angle with sectional thickness 0.55mm, unequal flanges of 25 & 10mm. Anutone Strut CC25 Cross channel, fully knurled, sectional thickness 0.55mm, length 3600mm, web 35mm, depth of 20mmand equal flanges 9.5mm is fastened to the Anutone Strut MC45 perpendicularly at 600mm centers. Tufbloc HDFR, 1200x2400x10mm is installed on the Anutone Strut CC25 with suitable fasteners in a staggered manner. 4mm gap should be maintained between adjacent Tufblocboards on all sides.Technical Parameters Fire (Class) – 1 & P, STC (12mm-41) –34 to 54, Thermal conductivity (W/mk)– 0.118, Climate (°C, RH) – 50, 95, Light reflectance (%) – Paint dependant, Green (VoC, RC %) – Low, 30 finally finishing with painting |
| 174 | Supply & installation of Wall Paneling using Sonator Ranurado made of pinewood E2 grade fiberboard, with slotted perforations, Melamine finish, FR Grade, size 600x1200x16mm, Square edge, volume density of base board 700Kg/m3, weight 9.3Kgs/m2(6R16), installed by using Strut framework system and Strut Z bar. Strut framework system includes Strut CC25 having thickness 0.55mm, length 3600mm, knurled web 35, depth 20mm and equal flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c. Strut Z bar having40mm height, thickness 1mm is first fixed behind the panels by using suitable fasteners. Another length of Strut Z bar are then installed over Strut CC25 horizontally at spacing so as to match with Strut Z bar at rear of Slit panels. Sonator Ranurado panels of size 600x1200x16mm are then slided into the Strut Z bar fixed on CC25. Long edges of panels should be perpendicular to Strut Z bar and Short edges of the panel are staggered. Panels are backlined with SynthPF 10x25 held in position with dab spots of Stick S7 Technical Parameters Fire (Class) – 1 & P (For FR grade) Acoustics – NRC upto 0.85, Thermal conductivity (W/mk)– na, Climate (°C, RH) – 40, 70, Light reflectance (%) – Colour Dependant, Green (VOC, RC %) – Low, 25 |
| 175 | Supplying and Fixing the Coffered False Ceiling with approved designs 8mm thick calcium silicate board designed and perforated for false ceilingof approved quality design pattern and drops given by the departmental officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20mc/c on both longtitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longtitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the 8mm thick calcium silicate board designed and perforated for false ceiling on the panel provided as per design/pattern given by the deptl officers. And fininshingthe ceiling surface with same plaster of paris materials etc.Necessary openings should be could with Acrylic paint made for providing spot light, floursent tubes in the ceiling by using kit ply 12mm thick and openings should be standard Specifications and etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 176 | Supplying and Fixing the8mm thick calcium silicate board designed and perforated for false ceiling with POP approved designs at centre , plain ceiling is done using 8mm thick calcium silicate of approved quality design pattern and drops given by the departmental officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20mc/c on both longtitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longtitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the8mm thick calcium silicate board designed and perforated for false ceilingon the panel provided as per design/pattern given by the deptl officers. And fininshingthe ceiling surface with same plaster of paris materials etc.Necessary openings should be could with Acrylic paint made for providing spot light, floursent tubes in the ceiling by using kit ply 12mm thick and openings should be standard Specifications and etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 177 | Supplying and Fixing of the multi stepped False Ceiling with Coffered pattern of approved designs using 8mm thick calcium silicate board designed and perforated for false ceiling of approved quality design pattern and drops given by the departmental officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20m c/c on both longtitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longtitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the 8mm thick calcium silicate board designed and perforated for false ceilingon the panel provided as per design/pattern given by the deptl officers. And finishingthe ceiling surface with same plaster of paris materials etc.Necessary openings should be could with Acrylic paint made for providing spot light, floursent tubes in the ceiling by using kit ply 12mm thick and openings should be standard Specifications and etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 178 | Providing and fixing 8 mm thick fully designed perforated calcium silicate board2"x2" panel tiled false ceiling (Hilux) includingsupplying and fixing true horizontal level false ceiling with 24mm prelude grid system Using hot dipped galvanised steel section exposed surface chemically cleaned caping prefinished in backed polyester paint wall angle of size 3000x19x19mm used in the periphery of the ceiling fixed to the wall, parttion with the help of screws at 600mm c/c. Mainrunner of size 3000x24mm suspended at a 1200mm c/c by using securely fixed to the structural soffit of RCC slab by using 6mm Nylon Rwl plug at every 1200mm(max) and 1200mm long cross tee of size 1200x24mm to interlocked between mainrunner at 600mm c/c(max) to form a grid of size 1200x600mm. 600mm long cross tee of size 600x24mm is inserted to form a grid of 600x600mm and finally laying classic lite regular edge tiles of size 600x600x15mm |
| 179 | Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. Officials.) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere |
| 180 | Providing and installing of 25mm thick Glass reinforced polymer concrete Jally (GFRC) workincluding wastages, transportation, adhesive/ glue, necessary hardwarde & anchor bolts, handling, stacking, scaffoloding etc., complete and as directed by the departemental officers |
| 181 | Supplying and Fixing Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like HARDWYN "GAZEL" (or) Equivalent (with ISI Monogram) |
| 182 | Preparation of Mock up designs in the Ground Floor Corridor in the two bays which includes of making the false ceiling with Ornamental POP Decorative designs, finishing the inner wall with clacium silicate board and making the ornamental pillars in inner face of corridor which should coincide with outer face of the corridor, sthapathy works in the pillars,painting the walls with two coats of emulsion paint with putty, colour schemes should be done minimum of four colour combination as instructed by the departmental officers,GRP handrails of 2 models in the outer face of the corridor, dismantling the cantilever slab in corridor leaving the length of the projection of slab as 1 feet 4 inch from base of brick pillar in the corridor bays where the mock up designsare being carried out. The designs and colours should be got appproval by the departmental officers. The rate inlcudes of materials cost, scaffolding , labour cost and conveyance charges. The rate for the mock up designs based on the carpet area where the designs executed. |
| 183 | Preparation of Mock -up Designs for Coffered false ceiling in auditorium with POP approved designs at centre , plain ceiling is done using 8mm thick calcium silicate of approved quality design pattern and drops given by the departmental officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20mc/c on both longtitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longtitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the8mm thick calcium silicate board designed and perforated for false ceilingon the panel provided as per design/pattern given by the deptl officers. And fininshingthe ceiling surface with same plaster of paris materials etc.Necessary openings should be could with Acrylic paint made for providing spot light, floursent tubes in the ceiling by using kit ply 12mm thick and openings should be standard Specifications and etc complete complying with standard specification and as directed by the departmental officers at site of work. The rate inlcudes of materials cost,scaffolding , labour cost and conveyance charges. The rate for the mock up designs based on the carpet area where the designs executed. |
| 184 | Preparation of Mock up designs in the Kural Manimadam ( First Floor of Auditorium )which includes of making the false ceiling with Ornamental POP Decorative designs, sthapathy works in the pillars, resizing the window openings, fixing the UPVC Window ( Casement type), MS Grills with approved designs and finished with approved synthetic enamel paint of two coats, making the 75 mm band using cement mortar 1:5 alround the window opening, finishing the flooring with approved vinyl flooring, supplying and fixing the thirukkural display board with approved design pattern of 2 nos ,painting the walls with two coats of emulsion paint with putty, colour schemes should be done minimum of four colour combinationas instructed by the departmental officers. The designs and colours should be got appproval by the departmental officers. The rate inlcudes of materials cost, scaffolding , labour cost and conveyance charges. The rate for the mock up designs based on the carpet area where the designs executed. |
| 185 | Supplying and fixing of manufactured precast concrete lintels using M20 Grade concrete for following specified depth. The rate includes mould, casting charges, steel, aggregate, cement, materials, mixing charges, finishing, curing, labour, conveyance and fixing charges at site etc., complete complying with standard specification and as directed. |
| 186 | 75mm thick lintel |
| 187 | 150mm thick lintel |
| 188 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. |
| 189 | 75mm thick slab (using 20mm HBGS Jelly) |
| 190 | Supplying and fixing of Perforated Rectangular Storm water Drain Precast Cover Slab 600 mm x 400 mm x 50 mm in position as directed by the departmental officers. The Rate inlcudes of the Material, labour, Transport and Fixing Charges. |
| 191 | Providing rain water harvesting pit of 1.50m dia and 1.50m depth with necessary earth work excavation,erecting the five nos of Rcc collar of 1.50m dia,sand filling of 0.60m depth,filling of 40mm HBS Jelly of 0.60m depth and covering with Rcc cover slab of 50mm thick and also connecting 110mm dia PVC pipe of 10m legth including transporting charges,fixing,etc complete. |
| 192 | Supplying and Laying Rubber Moulded paverblock of 60-63mm thick with new one using cement concrete 1:2:4 for manufacturing, finishing,Curing and conveyence to site and laying etc., complete complying with standard specification and as directed by the deparmental officers. |
| 193 | Renewing the damaged paver block with new one of paving and layingthe Special type of Paver Block with new one of 80 mm thick inter locked blocks of approved quality and make over a sand cushion and laying the paver blocks in true and straight alignment with gradient and pointing neatly using quarry dust of fly ash and pointing neatly hire charges for vibrator machine including diesel consumption charges etc., completecomplying with standard specifications and as directed by the departmentalofficers. |
| 194 | Reconstruction of damaged Manhole chamber of following with a base concrete of by new on of a base of concrete of Plain cement concrete 1:5:10, 10cm thick over a 10cm sand cushiion & brick work in CM 1:5 for chamber wall with 20mm thick 1:3 CM plastering for walls flooring including cost of labour charges curing cost of sFRC cover slab of size 600 mm x 600 mm x 600 mm including labour charges for fixing the slab inposition etc., |
| 195 | Inspection chamber of size 600 x 600 x 600mm |
| 196 | Inspection chamber of size 600 x 600 x 900mm |
| 197 | Supplying and fixing of PVC mould CI Steps of approved quality including dismantling masonry wherever necessary and redoing the damaged portion to original condition |
| 198 | Construction of Inspection chamber or manhole of the following size including necessary earth work excavation in all soils to full depth as may be directed with sand filling at bottom of the chamber for 10cm thick, concreting CC 1:5:10 using 40 mm guage HBGs jelly 10 cm thick and sode walls 9" thick brick work in cement mortar 1:5 using Fly ash bricks bricks of 230x110x70mm filling the size of foundation with excavated earth, plastering with cm 1:3 20m thick for inside and bottom and making necessary benching with brick jelly cement concrete to the required slope and finishing neatly etc., complete. |
| 199 | Inspection Chamber of Size 0.60 x 0.60 x 0.60m (average depth) |
| 200 | Inspection Chamber of Size 0.60 x 0.60 x 0.90m (average depth) |
| 201 | Inspection Chamber of Size 0.75 x 0.75 x 1.20m (average depth) |
| 202 | Inspection Chamber of Size 0.75 x 0.75 x 1.50m (average depth) |
| 203 | Supplying and fixing in position of Steel fibre reinforced cement concrete (SFRC)manhole / inspection chamber cover slab with following frame sizes including necessary labour charges for fixing the frame in position over the cement mortar base and finishing the joints etc. complete as directed. |
| 204 | 600x600mm cover slab |
| 205 | 750x750mm cover slab |
| 206 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly,etc.,complete complying with standard specifications and as directed by the Departmental Officers.The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc.,complete. The putty should be got approved by the Executive Engineer before |
| 207 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 208 | Providing the texture finish to the newly plastered wall with ready made texture putty with patterns at all levelsincluding thecost of coating, labour charges and other incidental charges etc., complete as directed by the departmental officers |
| 209 | Painting the wall two coats withExterior Emulsion paint over one primer coat and putty of over cement plastered wall surface etc.,complete complying with standard specification and as directed by the departmental officers. (The colour should be got approved by the Executive Engineer before use) |
| 210 | Painting the new walls with thorough scraping andtwo coats of Interior Emulsion with primer over one coat of putty of approved colour and quality including preparation of surface. through scrapping and finishingneatly etc., complete complying with standard specification and as directed by the departmental officers. (The colour should be got approved by the Executive Engineer before use). |
| 211 | Repainting the old iron work two coats of synthetic enamel paint of approved quality and colour and brand including thorough scrapping preparation of surface and finishing neatly etc complete complying with standard specification and as directed by the departmental officers at site of work.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 212 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 213 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 214 | Repainting the old wood work two coats in all floors with best Synthetic enamel paint of approved quality, colour and brand including thorugh scrapping, sand papering and preparation of surface including cost of bruses, high scaffolding charges neat finishing etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 215 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 216 | Thorough scrapping the existing kalkaram portion above stone car repairing the cracks and damaged designs using chemical grout by permenant filling material whereverfound necesssary. Apply one coat of chemical primer coat for acrylic elestomeric coating as water proofing and decoative which has crack binding properties, vapour permeable fungus resistant etc., over that painting the surface with multicolours (Panchavarnam) using the best quality of polythene chemical paint of approved ISI best quality two coats including artist paint working at various heights including lifting material, cost of brushes complete and as directed by the departmental officers at site of work. |
| 217 | Cleaning the Car stone for gunshot using hydraulic pressure pump with to removal of dust,funge in top surface of stone car etc.., complete and as directed by the departmental officers |
| 218 | Polishing the teak wood shutters / teak wood frame / teak wood vener for doors with two coats of Melamine polish to wood surface as per direction etc., the rate inclusive of cost of materials ,labour charges ,transportion charges, labour for scrapping charges, etc complete complying with standard specification and as directed by the departmental officer |
| 219 | Redoing the Portrait kural oviyam paintings of size 900 mm x 1200 mm and providing Ornamental T.W. beading 50mm and 25mm around the Portait Paintings and hanging in wall in position., providing the hook arrangments etc., completecomplying with standard specifications and as directed by the departmentalofficers. |
| 220 | Drilling of Borewells in Chennai District including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc.By first taking a pilot bore of 150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site shown by the Engineer Incharge including construction of mud pit etc., complete as directed. (Drilling 140/150 mm dia pilot bore) |
| 221 | Reaming 140 / 150 mm dia pilot bore to 300mm dia bore etc complete complying with standard specification and as directed by the departmental officers.Upto 60m depth ending below ground level. |
| 222 | Supplying of PVC casing pipes 160mm assembly (With slot or without slot) in the drilled hole including welding the joints etc., complete supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineers |
| 223 | Slotted pipe 160 mm Dia |
| 224 | Plain pipe 160mm Dia |
| 225 | Slotted pipe 110 mm Dia |
| 226 | Labour charges for inserting casing pipes assembly (with slot or with out slot) n the drilled hole including welding the joint ewtc. Complte and supplying and packing the annular space with pebbles of size and quality as approved by the executive engineer |
| 227 | Charges for developing the Borewell with air compressor of 600 CFH capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWD officers and conducting yield test by V notch method. |
| 228 | Supplying of best and approved quality of HDPE pipe of the following size including laying in the bore well and tying with copper wire it etc complete complying with standard specification. |
| 229 | 40mm dia |
| 230 | 32mm dia |
| 231 | 25mm dia |
| 232 | Supply and delivery of clear water vertical wet type submersible pump (5HP) suitable for 100 / 150 mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS 9283 /1995 and as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % |
| 233 | Supplying and fixing of 3.00 HP of approved brand submersibble Pump with accessories of starter, Main switch, panel board etc. complete to suit the need (The pump set should begot approved by the Executive Engineer before supply) |
| 234 | Supplyingandfixingthemotor2.00 HP Submergible pumpwith DOLstarter10to14AmpswithISImarkincluding labourforfixingthesameinpositionasshownbythedepartmentalofficers.complete. |
| 235 | Supplying and fixing of3 Phase Panel Board including labour charges, complete to suit the need (The pump set should begot approved by the Executive Engineer before supply) |
| 236 | Supplying and fixing of suitable PVC end cap (6Kg/cm2) for 6" dia bore well of best quality with ISI mark. (The PVC end cap should be got approved by the departmental officers before execution) |
| 237 | Supplying and fixing and connecting of 4 core 16 sq.mm Flat Sub mersible cable wire for the sub-mersible motor from panel board to sub-mersible pump. |
| 238 | Supplying and fixing of 63 mm dia stainless steel pipe nipple connecting for motor and HDPE pipe including labour charges etc,complete |
| 239 | Supplying and fixing of 20mmdia Nylon rope for submersible motor of approved quality in etc,complete complying with standard specifications. |
| 240 | Supplying and filling of pebbles of 10mm to 12mm Micron size including labour charges for filling to required depth and etc., complete as directed by the departmental officers. |
| 241 | Supplying and fixing of PVC storage tankincluding labour charges for fixing in position etc., complete complying with standard specification and as directed by the departmental officers. |
| 242 | Renewing and refixing of RO plant 500 LPH servicing of High pressure pump, filter media change, Micron Cartridge filter, Raw water tank flot, provision for Switch box, breaker, Electrical items and Provision for Full automatic sensorincluding Chemical wash cleaning work with labour charges for RO plant Room Shed etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 243 | Supplying and installation of Water Dispenser (Water cooler and heater type) has two taps, both giving cold water, has 150 L of cooling capacity per hour and 150 L of storage capacity and the complete body is made of Food Grade stainless steel with taps as well as internal tanks being made of stainless steel grade 304 having overall capacity of 14.1L and above has UV filtration type and smart indicator etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 244 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve/ Ball Valve with BIS makeof the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 245 | 20mm dia Ball valve |
| 246 | 25mm dia G.M. Gate Valve |
| 247 | 32mm dia G.M. Gate Valve |
| 248 | 40 mm dia G.M. Gate Valve |
| 249 | 50mm dia Ball valve |
| 250 | 65mm dia Ball valve |
| 251 | Supplying and fixing in position 15mm dia following taps (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 252 | 15mm dia Long body Tap |
| 253 | 15mm dia Stop Cock |
| 254 | 15mm dia Swan Neck Tap |
| 255 | Supplying and fixing in position 15mm dia two way bibcock(heavy duty) with Health faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 256 | Supplying and fixing in position best quality approved make Stainless steel sink of size of 600mm x 600mm x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets.[The sink and specials should be got approved by the Executive Engineer before use on works] |
| 257 | Supplying and fixing in position Indian make Special Type Mirror of size 1000 x 780mm with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 258 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 259 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 260 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works). |
| 261 | Supplying and fixing in position best quality and approved make under counter oval type wash hand basin of size 560 x 450mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 262 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm without pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 263 | Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.(The urinal should be got approved by the Executive Engineer before use on works.) |
| 264 | Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The squatting urinal should be got approved by the Executive Engineer before use on works). |
| 265 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware with Twin type PVC flush tank of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works). |
| 266 | Supplying and fixing in position White Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC /12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition,etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works)Floor Fitting |
| 267 | Supplying and fixing position CI Nahani Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 268 | Nahani Trap of size 100 x 75mm |
| 269 | Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap "A" grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works. |
| 270 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 271 | 75mm dia |
| 272 | 110mm dia |
| 273 | 160mm dia |
| 274 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 275 | 110mm dia PVC Elbow |
| 276 | 75mm dia PVC Elbow |
| 277 | 110mm dia PVC Elbow with Door |
| 278 | 75mm dia PVC Elbow with Door |
| 279 | 110mm dia PVC Tee |
| 280 | 75mm dia PVC Tee |
| 281 | 110mm dia PVC Tee with Single Door |
| 282 | 75mm dia PVC Tee with Single Door |
| 283 | 110mm dia PVC Y |
| 284 | 75mm dia PVC Y |
| 285 | 110mm dia PVC bend |
| 286 | 75mm dia PVC bend |
| 287 | 110mm dia PVC "Y" with Single Door |
| 288 | 75mm dia PVC "Y" with Single Door |
| 289 | Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before useon works) |
| 290 | 110mm dia |
| 291 | 75mm dia |
| 292 | Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, SS clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The UPVC pipes shall be got approved by Executive Engineer before use on works. |
| 293 | 20 mm dia |
| 294 | 25 mm dia |
| 295 | 32 mm dia |
| 296 | 40 mm dia |
| 297 | 50 mm dia |
| 298 | 65 mm dia |
| 299 | Supplying UPVC Specialsin water supply arrangements (both in internal and external water supply arrangements |
| 300 | 65 mm dia UPVC Elbow |
| 301 | 50 mm dia UPVC Elbow |
| 302 | 40 mm diaUPVC Elbow |
| 303 | 32mm dia UPVC Elbow |
| 304 | 25 mm diaUPVC Elbow |
| 305 | 20 mm diaUPVC Elbow |
| 306 | 65 mm dia UPVC Tee |
| 307 | 50 mm dia UPVC Tee |
| 308 | 40 mm diaUPVC Tee |
| 309 | 32mm dia UPVC Tee |
| 310 | 25 mm dia UPVC Tee |
| 311 | 20 mm diaUPVC Tee |
| 312 | 65x50mm dia UPVC Reducer |
| 313 | 50x 40 mm dia UPVC Reducer |
| 314 | 40x32mm dia UPVC Reducer |
| 315 | 32x25mm dia UPVC Reducer |
| 316 | 25 x 20 mm diaUPVC Reducer |
| 317 | 20 x 15 mm diaUPVC Reducer |
| 318 | 40x32mm dia UPVC Reducer Elbow |
| 319 | 32x25mm dia UPVC Reducer Elbow |
| 320 | 25 x 20 mm diaUPVC Reducer Elbow |
| 321 | 20 x 15 mm diaUPVC Reducer Elbow |
| 322 | 40x32mm dia UPVC Reducer Tee |
| 323 | 32x25mm dia UPVC Reducer Tee |
| 324 | 25 x 20 mm diaUPVC Reducer Tee |
| 325 | 20 x 15 mm dia UPVC Reducer Tee |
| 326 | 40 mm diaUPVC Hex Nipple |
| 327 | 32mm dia UPVC Hex Nipple |
| 328 | 25 mm diaUPVC Hex Nipple |
| 329 | 20mm dia UPVC Hex Nipple |
| 330 | 40 mm diaUPVC Union |
| 331 | 32mm dia UPVC Union |
| 332 | 25 mm diaUPVC Union |
| 333 | 20 mm diaUPVC Union |
| 334 | 65 mm dia UPVC Coupler |
| 335 | 50 mm dia UPVC Coupler |
| 336 | 40 mm diaUPVC Coupler |
| 337 | 32mm dia UPVC Coupler |
| 338 | 25 mm diaUPVC Coupler |
| 339 | 20 mm dia UPVC Coupler |
| 340 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes havinga pressure of 4 kg/sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3 metre pipe length, etc., complete complying with standard specification. |
| 341 | 160 mm dia |
| 342 | 110 mm dia |
| 343 | Supplyingandfixingof 300 mm diaHume pipe of approved quality and make including labour for fixing in position etc., complete complying with standard specification and as directed by the departmental officers at site of work. |
| 344 | Supplying and fixing of BRAILLE sign boards of size 6" x 9"(ADA) Americans with Disabilities Act or equivalent standards. The Braille signs shall be made out of ADA approved material. It must have non-glare backgrounds and characters. All signs that contain visual characters must have a high dark to light (or vice versa) contrast between characters and their background, preferablyBLUE and WHITE. All signs must have "easy to read" typefaces. Directional and informational signs can use upper and lower case letters and "simple" serif typefaces of a non-decorative nature. Condensed or extended typefaces are not allowed. Strokes are of medium weight, not too bold or too thin. The size of the letters is dictated by the distance of the sign from the expected position of the sign reader. Character size on these signs is to be determined by a chart in the 2010 ADA Standards for Accessible Design that uses a combination of the height of the text above the floor and the distance the reader has to stand from the sign. Tactile signs require uppercase characters in sans-serif typefaces. In terms of materials being used for making the Braille signs, Integrated colour acrylics like Row mark"s ADA Alternative line. KYDEX as per the direction of officers in charge. The material should be approved by the departmental officers. The rate includes cost of material, fixing charges, carpentary charges, manufacturing cost, transportation charges, loading & un-loading charges and fixing machinery charges, necessary of plywood"s etc complete complying with standard specification and as directed by the departmental officer. |
| 345 | Supplying, fabricating and fixing of tactile route map following (ADA) Americans with Disabilities Act or equivalent standards. The Braille signs shall be made out of ADA approved material. It must have non-glare backgrounds and characters. As per above specification of size 4"0" x 4"0" using stainless steel supporting arrangements with main leg of size 40mm x 40mm S.S square tubes and top finished with S.S Plate of 2.00mm thickness 62cm x 79cm in size over the cross stiffener using 12mm x 30mm S.S square tubes. The material should be approved by the departmental officers. The rate includes cost of material, fixing charges, manufacturing cost, transportation charges, loading & un-loading charges and fixing machinery chargesetc complete complying with standard specification and as directed by the departmental officer. |
| 346 | Supplying, fabricating and fixing of Floor Details with (ADA) Americans with Disabilities Act or equivalent standards. The Braille signs shall be made out of ADA approved material. It must have non-glare backgrounds and characters. As per above specification of size 4"0" x 4"0" using stainless steel supporting arrangements with main leg of size 40mm x 40mm S.S square tubes and top finished with S.S Plate of 2.00mm thickness 62cm x 79cm in size over the cross stiffener using 12mm x 30mm S.S square tubes. The material should be approved by the departmental officers. The rate includes cost of material, fixing charges, manufacturing cost, transportation charges, loading & un-loading charges and fixing machinery chargesetc complete complying with standard specification and as directed by the departmental officer. |
| 347 | Supplying, fabricating and fixing of Information Board with (ADA) Americans with Disabilities Act or equivalent standards. The Braille signs shall be made out of ADA approved material. It must have non-glare backgrounds and characters. As per above specification of size 4"0" x 4"0" using stainless steel supporting arrangements with main leg of size 40mm x 40mm S.S square tubes and top finished with S.S Plate of 2.00mm thickness 62cm x 79cm in size over the cross stiffener using 12mm x 30mm S.S square tubes. The material should be approved by the departmental officers. The rate includes cost of material, fixing charges, manufacturing cost, transportation charges, loading & un-loading charges and fixing machinery chargesetc complete complying with standard specification and as directed by the departmental officer. |
| 348 | Supplying and Fixing of Thirukkural Ornamental Display panel at the size of 6 feet height ½ feet width with specifications on two sides of pillars using materials12 mm wood plastic composite board , 304 stainless steel 40 mm x 20 mm x 1.6 mm thick rectangle square tube 24 mm, 12 mm 1.6 mm Round Tube , SS board on the both sides, top and bottom to provide the ornamental design engraved in CNC cutting, Thirukural and explanation of Doctor Muthamizh aringer Kalaignar in sheets as approved design by the departmental officers. The rate includes of Materials, Labour and Transportation. |
| 349 | Supply and Fixing of Braille Thirukkural Boards of Size 600 mm x 750 mm of(ADA) Americans with Disabilities Act or equivalent standards. The Braille signs shall be made out of ADA approved material. It must have non-glare backgrounds and characters. All signs that contain visual characters must have a high dark to light (or vice versa) contrast between characters and their background. All signs must have "easy to read" typefaces. Directional and informational signs can use upper and lower case letters and "simple" serif typefaces of a non-decorative nature. Condensed or extended typefaces are not allowed. Strokes are of medium weight, not too bold or too thin. The size of the letters is dictated by the distance of the sign from the expected position of the sign reader. Character size on these signs is to be determined by a chart in the 2010 ADA Standards for Accessible Design that uses a combination of the height of the text above the floor and the distance the reader has to stand from the sign. Tactile signs require uppercase characters in sans-serif typefaces. In terms of materials being used for making the Braille signs, Integrated colour acrylics like Row mark"s ADA Alternative line. KYDEX as per the direction of officers in charge. The material should be approved by the departmental officers. The rate includes cost of material, fixing charges, carpentary charges, manufacturing cost, transportation charges, loading & un-loading charges and fixing machinery charges, necessary of plywood"s etc complete complying with standard specification and as directed by the departmental officer. |
| 350 | Providing the Ornamental Stand of size 60 cm x 60 cm with Pedestal of height 80 cm made up of brickwork finishes with necessary plastering, finishes with Putty and texture paint of approved paint and colour, the Necessary Ornamental designs for the Pedestal should be provided as per the drawings provided by the departmental officers. The Top of the Stand should be enclosed by the Arcylic for the height of minimum 90 cm from the top of the Pedestal, the Corner should be enclosed with the Necessary Ornamental Teakwood Beadings, the designs for the Ornamental Stand for placing the Artefacts of the World Tamil Research Center in the corridor of Kural Manimadam Should be got approved by the departmental officers. |
| 351 | Supplying and Fixing the Eavesboard made up of WPC material of size 200 mmdepth, thickness 15mm of approved quality as directed by the departmental officers. The rate includes of materilas, labour, transport and conveyance charges. |
| 352 | Supplying and Fixing the UPVC Rainwater Gutter of size 160 mm of depth 100 mm of approved quality, with tensile Strength 955 kg/ m2, color coated, the material should got approved by the departmental officers. The rate includes of materials, labour, transport and conveyance charges |
| 353 | Supplying and placing in position of Special pattern TeakwoodCentre teapoy of 42"X42"X15"size supported by ornamentally carved legs. The wooden members are to be finished best polishing.The top of table is made of MDF board finished neatly.The rate includes cost of all materials, making charges, loading & unloading charges, conveyance charges, placing in position, finishing charges and all other incidental charges etc., but excluding the cost of GST etc., complete complying with standard specification and as directed by the departmental officers. |
| 354 | Supplying and placing in position of Special pattern TeakwoodCorner teapoy of size 20"X20"X20"size supported by ornamentally carved legs. The wooden members are to be finished best polishing.The top of table is made of MDF board finished neatly.The rate includes cost of all materials, making charges, loading & unloading charges, conveyance charges, placing in position, finishing charges and all other incidental charges etc., but excluding the cost of GST etc., complete complying with standard specification and as directed by the departmental officers. |
| 355 | Supplying and placing ofThree seater sofa of white floral pattern as per design (like Featherlite or equivalent). The base and back Coveredwith polyurethane foam lamination of 2 mm is provided, PU Foam for horizontal ribs and finally finished with leather of approved colour. The rate includes cost of all material, fixtures, making charges, loading & unloading charges, conveyance charges, placing in position, finishing charges and all other incidental charges etc., but excluding cost of GSTetc., complete complying with standard specification and as directed by the departmental officers.(The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on work). |
| 356 | Supplying and placing of Two seater sofa of white floral pattern as per design (like Featherlite or equivalent). The base and back Coveredwith polyurethane foam lamination of 2 mm is provided, PU Foam for horizontal ribs and finally finished with leather of approved colour.The rate includes cost of all material, fixtures, making charges, loading & unloading charges, conveyance charges, placing in position, finishing charges and all other incidental charges etc., but excluding cost of GSTetc., complete complying with standard specification and as directed by the departmental officers. (The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on work). |
| 357 | Supplying and placing in position CENTER CARPET with floral OBSESSIONS 240X340cm BELLUCHI 88570-6262as per design. The rate includes of laying, conveyane and all other incidental charges etc.,complete complying with standard specfication and as directed by the departmental officer. (The materials quality,brand, colour should be approved by the Executive Engineer before use on work). |
| 358 | Providing Executive table (Special type) of size 72"x36"x30" and side unit 42"x18"x27" (TWTBL 0080) made out of 18mm commerical plywood with OST melamine polish, Top side and front all roun d teak wood moulding beading and one side a drawer cupboard, side unit key board arrangments of size and box type foot rest with 8mm Glass on top. Complete and as directed by the departmental officers |
| 359 | Supplying and fixing of Computer Table of Size 800mm (W) x 600mm (D) x 750mm (H) : having one drawer and one CPU holder with keyboard tray and heavy duty Ebco make slider.The Table top made out of 25mm thick postformed finish bottom understructure for leg and modesty are 18mm thick pre laminated particle board duly edge baned with PVC edge beeding.etc., complete complying with standard specification and as directed by the departmental officers. |
| 360 | Supplying and fixing of storage unit of overall size 900mm(W) x 450mm (D)2400mm (H) Five shelves making 6 compartment. The unit box made out of 18mm thick and shelves are 25mm pre laminated particle board duly edge banded with 0.5/ 2mm exposed edges thick PVC beeding and swing type shutters with necessary accessories like hinges, handles and locks etc., complete complying with standard specification and as directed by the departmental officers. |
| 361 | Providing and fixing Executive High Back revolving chair with cushion seat and Back with black colour Rexine finish (TSCHR 004) etc., complete complying with standard specification and as directed by the departmental officers. |
| 362 | Supplying and fixing of Mid Back Chair Model Divine The chair are Glass filled nylon base with sturdy 50mm GF Nylon dual wheel castors and 120mm Gaslift for hydraulic height adjustment , T Type adjustable PU armrest .back :ABS with korean upholstery Synchro tilt mechanism with inbuilt lumbar support, The seat portion of the chair PU moulded cushion with good quality approved fabric etc., complete complying with standard specification and as directed by the departmental officers. |
| 363 | Supplying and fixing of Visitor Chair R type : The chairs are frame made of 14 SWG round tubular frame with powder coated The seat and back portion of the chair will be made of foam cushion and good quality approved fabric with PU armrest etc., complete complying with standard specification and as directed by the departmental officers. |
| 364 | Supplying and fixing in position of Wooden Dias of size 6.90mx2.20m, 0.25m depth using 19mm water proof thick plywood best and approved quality over the plywood fixing with Vinyl sheets thick with fevicol best quality and also includes ofnecessary furniture fitings such as screws, nails, handles, moving gear for sliding, hinges, locking magnet etc., complete also labour charges for moving,fixing and transportation etc., complete complying with std. specification and also directed by the departmental officerbefore fixing in the site. |
| 365 | Providing & Fixing of Corian Top Dining Tableof size 4 .0m X 2.5m with 18mm thick waterproof ply with 6mm corian sheet at the top of the plywood all sides covered with corian beeding and leg 2 X 1 SS 304 Grade pipe with floor adjustment bushes at the bottom. The rate includes labour for manufacturing, supply, transportation, etc., |
| 366 | Providing Teakwood Dining Chair made out of teakwood with melamine polish frame with cushion seat. The rate includes labour for manufacturing, supply, transportation, etc., |
| 367 | Supply of Office Table L1200 x D600 x H750mm 25mm thk.Table Top E/B L1200mm X D600mm - 1Nos 25mm thk. Vertical Leg E/B 900mm X 750mm - 2Nos 25mm thk. Vertical Leg E/B 900mm X 750mm - 2Nos Side Storage unit Size : L900 x D450 x H750mm Back Storage Unit Size 1200 X 450 X 75 Mobile Pedestal ( 3 Drawer ). Table Tops and legs made out of made out of 25mm or 18mm thick Commercial Plywood, all exposed edges are Machine pressed Edgebanding finish 3 Draw mobile pedestals of Size 400mm W x 450mm D x 680mm H completely made of 18mm Commercial Plywood finished with 2mm thick PVC machine pressed edge banding. Mobile unit to have central locking system with wheels The rate includes labour for manufacturing supply, transportation, etc., |
| 368 | Supply of Medium Back Revolving Chair (TSCHR 015): made out of steel 5 prongs caster wheel metal base, Medium Back Revolving Chair with cushion seat and back with maroon colour cloth / rexine finish.The rate includes all and as directed by the departmental officers |
| 369 | Supplying and fixing of Acrylic name Board(30"" x 5"") with Necessary Sticking andFixing at the entrace of the roomsin the Existing Surface with necessary screws ,drilli and in neat alignment etc.,the rate is inclusive of cost ,materialsand labour Chardes etc., complte and excluding the Charges for scaffolding and as directed by the departmental officers (the colour of acrylic foam board and letters should be got approved by the executive engineer ) |
| 370 | Supplying and fixing of Notice Board Velvet Cloth with Glass Door finish of size: 6" x 4" x 4" (Non std 287): Notice Board Velvet Cloth with Glass Door Finish of size 6" x 4" x 4" made out 19mm bwp plywood (Green ply or Eq) 1mm lamination sheet (Green ply or sundek), 12mm Soft Board, Maroon Upholstry Cloth, Glass Door with locking arrangements.The rate includes all and as directed by the departmental officers |
| 371 | Making Lawn with shade grass plantingincluding forking the ground the top dressing with sludge mannure (or) fertilzers mixing the same with forked soil warering an maintaining the Lawn etc complete complying with standard specification and as directed by the departmental officers at site of work. |
| 372 | Making the lawn Korean grass truffing grass planting including forking the ground top dressing with sludge manure of fertilizers mixing with the same width forked soil, watering, weeding and maintenance for a period of 180 days or more from the actual date of completion of planting work till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if need etc complete. |
| 373 | Providing and Displaying Acalypha tricolour plant well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge.The maintenance for the plant will be for a period of180 days or more from the actual date of completion of planting work. |
| 374 | Providing and Displaying Acalypha red plant well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.The maintenance for the plant will be for a period of180 days or more from the actual date of completion of planting work. |
| 375 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.The maintenance for the plant will be for a period of180 days or more from the actual date of completion of planting work. |
| 376 | Providing and Displaying Foxtail palm plant well developed with fresh &healthy foliage of ht. 280 to 320 cm as per direction of the officer-in-charge.The maintenance for the palms will be for a period of180 days or more from the actual date of completion of planting work. |
| 377 | Providing and Displaying of Spaider lilly plant of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.The maintenance for the plants/Ground covering will be for the period of180 days or more from the actual date of completion of planting work. |
| 378 | Supply and stacking of Mimusops elengi (Maulsri) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. The maintenance for the tree will be for a period of180 days or more from the actual date of completion of planting work. |
| 379 | Supply and stacking of Plumeria alba dwarf plant dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.The maintenance for the tree will be for a period of180 days or more from the actual date of completion of planting work. |
| 380 | Supply and stacking of plant Ficus blackii (F.vivion) of height 45-60 cm.with 6-8 branches healthy foliage in earthen pots of size 25 cm as per direction of the officer-in-charge.The maintenance for the toll shrubs will be for a period of180 days or more from the actual date of completion of planting work. |
| 381 | Supply and stacking of plant Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. The maintenance for the toll shrubs will be for a period of180 days or more from the actual date of completion of planting work. |
| 382 | Supply and stacking of plant Plumbego capensis well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge.The maintenance for the toll shrubs will be for a period of180 days or more from the actual date of completion of planting work. |
| 383 | Supply and stacking of plant Tabernaemontana coronaria (Chandni single) of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. The maintenance for the toll shrubs will be for a period of180 days or more from the actual date of completion of planting work. |
| 384 | Supply and stacking of plant Tecoma gaudichaudi of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. The maintenance for the toll shrubs will be for a period of180 days or more from the actual date of completion of planting work. |
| 385 | Providing and Displaying Juiperus well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.The maintenance for a period of plant will be of 180 days or more from the actual date of completion of planting work. |
| 386 | Providing and Displaying Areca palm plant well developed with fresh &healthy foliage of ht. 150 cmas per direction of the officer-in-charge.The maintenance for a period of palm will be of 180 days or more from the actual date of completion of planting work. |
| 387 | Providing and Displaying Kentia palm plant well developed with fresh &healthy foliage of ht. 210cm as per direction of the officer-in-charge.The maintenance for a period of palm will be of 180 days or more from the actual date of completion of planting work. |
| 388 | Providing and Displaying Livistona palm plant well developed with fresh &healthy foliage of ht. 210cm as per direction of the officer-in-charge.The maintenance for a period of palm will be of 180 days or more from the actual date of completion of planting work. |
| 389 | Providing and Displaying Rhapis multifida plant well developed with fresh &healthy foliage of ht. 75cm as per direction of the officer-in-charge.The maintenance for a period of palms will be of 180 days or more from the actual date of completion of planting work. |
| 390 | Providing and Displaying Virchamalli gold palm plant well developed with fresh &healthy foliage of ht. 150 cmas per direction of the officer-in-charge.The maintenance for a period of palm will be of 180 days or more from the actual date of completion of planting work. |
| 391 | Providing and Displaying of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.The maintenance for a period of ground covers will be of 180 days or more from the actual date of completion of planting work. |
| 392 | Providing and Displaying of black lilly plant of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.The maintenance for a period of ground covers will be of 180 days or more from the actual date of completion of planting work. |
| 393 | Providing and Displaying of Ficus Panda plant of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.The maintenance for a period of ground covers will be of 180 days or more from the actual date of completion of planting work. |
| 394 | Providing and Displaying of Pentas Carnia plant of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.The maintenance for a period of ground covers will be of 180 days or more from the actual date of completion of planting work. |
| 395 | Providing and Displaying of Red grass plant of height 30 cm to 45 cm, full of leafy branches in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.The maintenance for a period of ground covers will be of 180 days or more from the actual date of completion of planting work. |
| 396 | Supply and stacking of Calophyllum inophyllumplant of height 300 cm.as per direction of the officer-in-charge.The maintenance for a period of trees will be of 180 days or more from the actual date of completion of planting work. |
| 397 | Supply and stacking of Conocarpusplant of height 180 cm. as per direction of the officer-in-charge.The maintenance for a period of trees will be of 180 days or more from the actual date of completion of planting work. |
| 398 | Supply and stacking of Pongamia glabra plant of height 280 cm.as per direction of the officer-in-charge.The maintenance for a period of trees will be of 180 days or more from the actual date of completion of planting work. |
| 399 | Supply and stacking of Swietenia mahagoni plant of height 300 cm. as per direction of the officer-in-charge.The maintenance for a period of trees will be of 180 days or more from the actual date of completion of planting work. |
| 400 | Supply and stacking of Terminalia green plant of height 240 cm.as per direction of the officer-in-charge.The maintenance for a period of trees will be of 180 days or more from the actual date of completion of planting work. |
| 401 | Supply and stacking of Terminalia mantaly plant of height 240 cm.as per direction of the officer-in-charge.The maintenance for a period of trees will be of 180 days or more from the actual date of completion of planting work. |
| 402 | Supply and stacking of Thespesia populnea plant of height 300 cm.as per direction of the officer-in-charge.The maintenance for a period of trees will be of 180 days or more from the actual date of completion of planting work. |
| 403 | Supply and stacking of plant Aralia of height45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 404 | Supply and stacking of plant Caesalpinia of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 405 | Supply and stacking of plant Canna hybrid of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 406 | Supply and stacking of plant Cypress of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 407 | Supply and stacking of plant Eranthemum gold of height 60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 408 | Supply and stacking of plant Eranthemum red of height 60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 409 | Supply and stacking of plant Eugenia oleina of height 60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 410 | Supply and stacking of plant Ficus triangularis variegata of height 23 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 411 | Supply and stacking of plant Galphimia of height 45 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 412 | Supply and stacking of plant Nackiteria of height 45 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 413 | Supply and stacking of plant Spathiphyllum of height 30 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 414 | Supply and stacking of plant Schefflera of height 30 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of toll shrubs will be of 180 days or more from the actual date of completion of planting work. |
| 415 | Supply and stacking of Hedge plant Heliconiaof height 75 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of hedge plant will be of 180 days or more from the actual date of completion of planting work. |
| 416 | Supply and stacking of Hedge plant Ixora singaporensisof height 75 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of hedge plant will be of 180 days or more from the actual date of completion of planting work. |
| 417 | Supply and stacking of Hedge plant Philodendron xanaduof height 60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.The maintenance for a period of hedge plant will be of 180 days or more from the actual date of completion of planting work. |
| 418 | Providing, Fixing, Testing & Commissioning of 16mm x 2.5 kg/cm2Drip Polytube as per IS 12786 Jain / Plastro / Netafm make with all necessary fittings of ISI mark, including all labours, all taxes if any etc.complete. and as directed by the departmental officers.(All the materials should be got approved by the Executive engineer before use on works ) |
| 419 | Providing,Fixing,Testing and commissioning of Pressure compensatingDrippers 4/8 lph as per IS-13487 Jain / Plastro / Netafm make with all necessary materials and labour ,all Taxes etc.complete. and as directed by the departmental officers.(All the materials should be got approved by the Executive engineer before use on works ) |
| 420 | Providing & fixing of Pop up spray headhaving variableadjustable arc and two piece stem ratchet ( 0 to 360 degrees)nozzle capable of covering 4.5-5.4m at 2.0 Bars with a discharge rate of 0.23- 0.33lps.The Spray Head body, stem, nozzle ,ratchet and screen shall be constructed f heavy-duty, ultraviolet resistant plasticand stainless steel with mutifunctional wiper seal withsmall exposed cover and as directed by the departmental officers.(All the materials should be got approved by the Executive engineer before use on works ) |
| 421 | Providing & fixing of Pop up spray headhaving colour coded Rotary nozzle with multiplestream MPRwater spray capable of covering 13 to 24 feet with a discharge rate of0.08 to0.15lps.The Spray Head body, stem, nozzle ,ratchet and screen shall be constructed f heavy-duty, ultraviolet resistant plasticand stainless steel with mutifunctional wiper seal withsmall exposed cover and as directed by the departmental officers. (All the materials should be got approved by the Executive engineer before use on works ) |
| 422 | Providing & fixing of Pop up sprinkler full/part circle having radius of throw 6.7m - 15.2m & flow of 0.09 - 0.61 ltr./sec.at an operative pressure of 2.5 - 4.5 kg/cm.sq. , The sprinkler is gear driven rotary typewithRC technology having 3/4" bottom inlet, withslip clutch mechanism and heavy duty retract spring..The sprinkler shall have multi-function, pressure-activated wiper seal for low pressure opreation a The sprinkler shall have internal Seal - A - Matic device which prevents low head drainage (upto 3.1m) & hence puddling & erosion. Thebody of sprinkler is of non - corrodible, heavy duty, ABS plastic. and as directed by the departmental officers.(All the materials should be got approved by the Executive engineer before use on works ) |
| 423 | Providing & fixing of a double acting Air release valve 3/4" made of high strength aluminium / plastic with fibre glass reinforced . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. and as directed by the departmental officers.(All the materials should be got approved by the Executive engineer before use on works ) |
| 424 | Supplyingandfixingthemotor7.5 HP Submergible pumpwith DOLstarter10to14AmpswithISImarkincluding labourforfixingthesameinpositionasshownbythedepartmentalofficers.complete. |
| 425 | Providing and fixing of control panelsuitable for pumpset having panel boxmade of CRCA sheet of 2 mm thickness and fixed alongwith following accessories DOLstarter (L&T make),start / stop push buttons (L&T make), Ammeter (AE make), Single phase preventor (Minilec make), Voltmeter (AE make) , Indicating lamps (L & T make), MCB (L & T make), Dry level guard sensor (Minilec make) with control cable, etc.and as directed by the departmental officers. (All the materials should be got approved by the Executive engineer before use on works ) |
| 426 | Supplying of Powerful 1600W 38CM Compact Mower , Weight (Kg) : 14.7 Kg, Type of Product : Electric Lawn Mower, Cutting Width : 14 inch, Power : 1600 watts Model No : BEMW471BH-BWith Ergonomic New Handle Design High Performance Blade Design Delivers 80% Better Collection & Improved Overall Cutting Performance Ideal for small to medium sized gardens up to 600 square meters Lightweight compact mower that is easy to use and store away Front and back axle height adjust lever 20-70cm Increase productivity with the 45L collection box allowing more grass to be collected therefore reducing the time spent emptying Intuitive Full Bag Indicator tells you when the bag is full and ready to empty Simple height change lever on wheel axel for the perfect finish every time Integrated handle on deck makes the unit easy to carryetc., The Brand of Compact Mower should be got approved by the departmental officers. |
| 427 | Supplyingof 2HP 2 Stroke Air Cooled Brush Cutter, SBC-252Sameer SBC-252 Brush Cutter, a powerful landscaping tool designed to tackle even the toughest vegetation with ease. Equipped with a robust 52cc engine displacement, this brush cutter delivers exceptional performance for professional and residential use. With a formidable 2HP engine power and a reliable 2-stroke engine, it effortlessly cuts through dense grass, thick weeds, and stubborn undergrowth. The air-cooled system ensures efficient operation, preventing overheating during prolonged use. Plus, the generous fuel tank capacity of up to 0.75 liters allows for extended cutting sessions without frequent refueling. Experience superior cutting capabilities and remarkable durability.The Brandshould be got approved by the departmental officers. |
| 428 | Supplying ofFollowing Gardening Equipments of approved brand and quality as directed by the departmental officers |
| 429 | Mild Steel Wheel barrow with 150 kg load capacity |
| 430 | Metal Rake, 31-64 inch adjustable expanding handle Metal Rake |
| 431 | Hedge Trimmer, 42 cm with Dual action Blade of 420 W |
| 432 | String Trimmer of 18 V , Cordless, 2Ah Lithium Ion Battery |
| 433 | D- Handle Shovel,10 x 10 x 10 cm , Alloy Steel |
| 434 | PVC Water Garden Hose of dia 2", 10 m length |
| 435 | Heavy duty Electric 18 inch Chainsaw ,58CC,3.5 KW, 12500 RPM |
| 436 | Trowel, 28 x 7.5 x 1 CM, 180 grams |
| 437 | Plastic Watering Rosecan of 5 litre |
| 438 | Supplying of Electric Wire Rope Hoist, Capacity - 0-1 ton, Wire Length - 4-6 m, lifting Speed - 8 mtrs/ min, Lifting Height - 11 metres, Speed travel- 20 metres/ min, Wire Row dia- 5.1 nm, radius of beam - 1.5 metre, the hoist frames are made from Heavy duty steel plates & sections. The rate includes of material, transport and fixing charges. |
| 439 | Supplying of Movable Aluminium Scaffolding Tower with stairway of Size : LxW 6.5 feet x 5 feet Platform height 6 meter overall height 7 meter. As per specification : All pipes are made up of Aluminium alloy HE 30 grade T6 temper. JINDAL/ HINDALCO MAKE. Step made up of 50mm OD 2.5mm thickness. H frame Height 2000mm Width 1500mm Cabin Height 1000mm Width 1500mm Platform size 580mm x 1690mm With aluminum chequred sheet Hand rails / Horizontal Bar / Diagonal Bar Dia 50mm x 2.5mm thickness GI “U” Clamp, Nylon wheels with foot brake system, Outer Trigger for four side corners (if necessary) Non slip, extra grip flat corrugated mullion steps. High Quality Leg Grip chequred sheet for top of the platform (Plywood / Aluminium) Maximum Working Load: 300 kg |
| 440 | Supplying and Fixing the Folding Fabric Movable Partition made of up of high quality materials and flow along a horizontal guide attached to the ceiling , the wall panel is constructed with a solid external aluminium frame fitted with our heavy duty rubber gasket at all four sides,the aluminum frame is either concealed or exposed to create a flat and smoth edge and sound isolation with standard specifications. |
| 441 | Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 442 | Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 443 | Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 444 | Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 445 | Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 446 | Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. |
| 447 | Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT. |
| 448 | 200mm dia |
| 449 | 150mm dia |
| 450 | 100mm dia |
| 451 | 80mm dia |
| 452 | 65mm dia |
| 453 | 50mm dia |
| 454 | 40mm dia |
| 455 | 25mm dia |
| 456 | Designing, Fabrication and fixing of Riser Supporting Clamp using 50 x 50 x 6 mm M.S "L" angle, fabrication in line withBuilding Pillers,20 mmincluding the charges of cutting, Grinding, welding, Painting with one coat of Metal Primer and twoc Coats P.O Red Enamel paint, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete and as per standard specification and as directed by the Departmental Officers. |
| 457 | Wrapping and coating anti-corrosive treatment for the following under ground MS pipe having one coat of anti corrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods as per standard specifications and as directed by the Departmental Officers. |
| 458 | 150mm dia Wrapping Coating |
| 459 | 100mm dia Wrapping Coating |
| 460 | 80mm dia Wrapping Coating |
| 461 | Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accesories, such as, MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT |
| 462 | 150mm Dia Foot Valve |
| 463 | 100mm Dia Foot Valve |
| 464 | Supply, erection, testing and commissioning of 80mm dia Heavy Duty Foot Valve including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at end of 80mm dia suction pipeline at sump as per the standard method and as directed by the Departmental Officers. |
| 465 | Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT |
| 466 | 150mm dia Sluice Valve |
| 467 | 100mm dia Sluice Valve |
| 468 | 80mm dia Sluice Valve |
| 469 | Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 470 | 150 mm dia |
| 471 | 100 mm dia |
| 472 | Supply, erection, testing and commissioning of cast iron body and gun metal or stainless steel Internal Non-Return Valve of size of 80mm dia to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 473 | Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT. |
| 474 | Supply, erection, testing and commissioning of Gun Metal Non-Return Valve of size 50mm dia including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT. |
| 475 | Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT |
| 476 | Priming Tank mounted with the supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room, as directed by the Departmental Officers. |
| 477 | Supply and laying of following sizes of Armoured Aluminium / Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. |
| 478 | 3 core 185 sq.mm. armoured aluminium cable |
| 479 | 3 core 95 sq.mm. armoured aluminium cable |
| 480 | 3 core 10 sq.mm. armoured copper cable |
| 481 | 10 core 2.5 sq.mm. armoured copper cable |
| 482 | 2 core 2.5 sq.mm. armoured copper cable |
| 483 | 2 core 1.5 sq.mm armoured multi strand aluminium |
| 484 | Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers. |
| 485 | Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: H- GURU / ISI MAKE / EQUIVALENT. |
| 486 | Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT. |
| 487 | Supply, erection, testing and commissioning of 180 LPM, 70 metres Head Pressurization Pump with 10HP electrical motor of Kirloskar make with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIRLOSKAR / EQUIVALENT. |
| 488 | Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Rated for 2280 LPM at 70 metres head with Electrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories. (Make: Kirloskar or Equivalent). The rate inclusive of necessary vibration, bad mounting etc., as per standard method as directed by the Deparmental Officers. |
| 489 | Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following and complete in all respects as required. a. End suction, top discharge centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg. / sq. cm at highest and farthest outlet at specified flow of 2280 LPM at 70m head conforming to IS 1520. b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dyanamo, solenoid switches etc. c. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre-filter, after filter etc.(Make: Kirloskar / Equivalent). d. Exhaust system having flexible metallic mufler, 100mm dia MS heavy pipe extended upto 1m, outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessory MS support arrangements from wall or ceiling as per site condition. |
| 490 | e. Dash board consisting the instruments like temperature gauge, galvano type DC Ammeter, lubricant oil pressure gauge, ignition switch, emergency stop and all other protection equipment as per specification, stop seleneid for auto stop in the event of fault with audio indications, painted with post office red colour etc., as required.f. 12 V / 24 V storage battery, maintenance free tape, 180 AH rating, MS fabricated common base plate, coupling guard, foundation bolts etc., as required. g. Positioning the diesel engine driven fire pump over cement concrete foundation using suitable size anti-vibration mounting arrangement. All works carried out as per standard methods and as instructed by the manufacturer and as directed by the Departmental Officers.(Make: Kirloskar / Equivalent) |
| 491 | Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent) |
| 492 | Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings. A. Common Panel in Fire Pump House (i). Incomer a. 1 No. 600A TP & N SDFU with HRC fuses b. 1 set of 600A, 4 bar aluminium bus bar, 415 V, 50 HZ AC supply c. 1 No. (0-500A) digital ammeter with selector switch & CTs d. 1 No. (0-500V) digital voltmeter with selector switch and control fuses e. 3 Nos. phase indication lamp LED type with toggle switches with control fuses (ii). Outgoing a. Main Fire Pump 400 A TPN SDFU with HRC fuses with sutable HP fully automatic starter / delta starter with over load protection, digital ammeter with built-in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual / OFF operation 1 No. |
| 493 | b. Jockey Pump 125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual operation - 1 No. c. Diesel Engine Control comprising of: 1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start / stop in manual mode. 2. Indication lamp for high / low lubricant oil pressure, high water temperature and engine ON indication. 3. Battery charger suitable for 12V /24V DC with boost and tickle selector switch, 0-15V / 0-30V DC volt meter, 0-20A DC ammeter. 4. All standard relays and accessories for automatic operation of diesel engine. 5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. |
| 494 | Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX / EQUIVALENT. |
| 495 | Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT. |
| 496 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 497 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 498 | Supply and kept in position of Trolley Mounted Water CO2 Stored Pressure Type 50 litres capacity Fire Extinguisher as per IS13385, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 499 | Supply and kept in position of Trolley Mounted Type 22.5 kg. Carbon-di-Oxide Fire Extinguisher as per IS15683, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT |
| 500 | External Hydrant Ring Main Excavation for laying M.S. Pipe in below ground with 0.60 x 1.20 meters width & depth andbackfilling of soils including redoing of floors to the original condition as directed by the department officers. |
| 501 | Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling. Pipe shall be 16 bar pressure rating and 1500mm long, 25mm dia with union / reducer, collar, clamps, etc. It shall have UL listed and FM approved. |
| 502 | Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling. Pipe shall be 16 bar pressure rating and 1000mm long, 25mm dia with union / reducer, collar, clamps, etc. It shall have UL listed and FM approved. |
| 503 | Supplying installation testing commissioning Rosed plate |
| 504 | Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification. as directed by the department officers. |
| 505 | 200mm dia |
| 506 | 150mm dia |
| 507 | 100mm dia |
| 508 | 80mm dia |
| 509 | 50mm dia |
| 510 | 40mm dia |
| 511 | 25mm dia |
| 512 | Supply and fixing in position of 12 Volt 180 AH Lead Acid, Sealed Maintenance Free (SMF) batteries with connecting leads, lugs terminal post, etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT. |
| 513 | Supply & Installation ofin position the sign board of "EXIT "with arraow to be placed at walking pathways by fixing on walls to direct occupants to outside the buliding in an emergency. The Exit sign board will be autoglow photoluminiscent type which will glow at dark.(Single Side indication) |
| 514 | Supply & Installation of Fire Escape Route Plan Laminated Board Auto Glow Print to be placed at each floor by fixing on walls to direct occupants to outside the buliding in an emergency. TheFire Escape Route Plan will be autoglow photoluminiscent type which will glow at dark.(Single Side indication) |
| 515 | Supplying and fixing of 5.00 HP of approved brand Monoblock Pump with accessories of starter, Main switch, panel board etc. complete to suit the need (The pump set should begot approved by the Executive Engineer before supply) |
| 516 | Clearing the heavy jungles and leveling the site using JCB including hire charges for Fuel, Labour etc., complete complying with standard specification and as directed by the Departmental Officer. The rate inlcusive cost of labours, fuel consumption,JCB Operators and labour charges for clearing the obstacles infront of vehicle wheel. |
| 517 | Labour charges for cutting and removing the fallen trees using power tooles 2 Nos with manual operation for wood cutting including fuel consumption charges removing the tree branches and leaves for labour charges for including stacking same at site as shown by the departmetal officers. |
| 518 | Making the Ornamental Brick Pillar of Size52 cm x 25 cmof height 3.45 m with Pillar Capital of size 38 cm x 52 cm x 52 cm on one side and 38 cm x 25 cm x 52 cm on two sides of the brick pillar with approved design using best quality of Second Class Table Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" in Cement Mortar 1 :5 , Plastering with Cement Mortar 1:5 and applying and finishing the One Coat of lime putty on wall surfaceincluding curing, etc., complete complying with standard specifiction. |
| 519 | Supplying and erection of Ornamental stone pillar of height 3.50m with ornamental base of size 900 mm x 900mm and having capital head of depth 550mm. The sides of the pillar having aSthapathy design in the pillar at top portion - 520 mm x 520 mm, Middle portion - 360 mm x 1040 mm, bottom - 520 mm x 900 mm with approved design in the pillar etc., complete complying with standard specifiction.. The rate includes transport, erection and labour charges. |
| 520 | Making the Ornamental Designs in the Brick Pillarof size 500 mm x 500 mm x 3300mm height in Cement Mortar 1: 5on two sides of the pillar as given in the approved drawings with standard specifications and as directed by the departmental officers. The rate includes materials, labour, transport and conveyance charges. |
| 521 | Providing ornamental sthapathi band in parapet wall top with two layers of band as shown in the sketch to a height of 0.15m & 0.30m to give a aesthetic look using with necessary rich cement mortar 1:2, cement concrete,Skilled labour,curing etc,. |
| 522 | Finishing the ornamental column to a required height as shown in the sketch with ornamental grooves&equal intervals as shown in the sketch using with necessary cement mortar 1:2, Skilled labourers for Sthapathy etc.,including labour cahrges for finishing,curing and for excluding scaffolding charges etc,.Complete complying with standard specifications and as directed by departmental officers. |
| 523 | Providing and finishing the entrance with ornamental bands around the opening(gothics)as shown in the sketch using with necessary cement mortar 1:2,brick work,skilled sthapathi skilled labourers,curing and for excluding scaffolding charges etc, complete complying with standard specification and as directed by departmental officers. |
| 524 | Providing and finishing alround the windows with ornamental bands using with necessary cement mortar 1:3 -20mm thick using with necessary skilled labourers,masons, sthapathi and for excluding scaffolding charges etc, complete complying with standard specification and as directed by departmental officers. |
| 525 | Making an Ornamental designs and finishing for an height of 1.00m using the cement plastering 1:5 from the top of compound wall including brick work finishing, labour charges, material conveyance charges along the coumpound wall etc. complete complying with standard specification and as directed by the departmental officers. |
| 526 | Making an Ornamental Sthapathi work for Pillar crown head of depth 900mm in the compound wallincluding any other brick work, plastering,finishing, labour charges, material conveyance charges along the coumpound wall etc. complete complying with standard specification and as directed by the departmental officers. |
| 527 | Enhancing the top curve portion in the Thorana vayil Entrance of arc length 15.50 m on the both sides of the arch with cement mortar 1:5 with exisitng floral pattern in the structure and other stucco works as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, removing the existing design,preparation of the surface, making the new floral design approved by the departmental officers as per elevationa and finishing the new pattern. |
| 528 | Making the Ornamental window Arch of size 1000 mm x 930 mmwith decorative pillar as support of width 150 mm x 150 mmrests on the the top of the slab of Thorana vayil Entrance ( at the height of the 5.72 m from the Ground level ), stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 529 | Making the Ornamental Pillar Archof size 2330 mm x 2670 mm at roof level with decorative designs, the archrests on the the top of the slab of Thorana vayil Entrance ( at the height of the 5.72m from the Ground level ), stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 530 | Making the Ornamental middle Arch of size 2650 mm x 3980 mm at roof level with decorative designs, the archrests on the the top of the slab of Thoronovoyil Entrance ( at the height of the 5.72m from the Ground level ), supported by the brick pillar 220 mm x 1740 stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 531 | Making the Ornamental Door Arch of size 1260 mm x 2660 mm at roof levelwith decorative designs, the archrests on the the top of the slab of Thorana vayil Entrance ( at the height of the 5.72m from the Ground level ), stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, removing the existing the design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 532 | Making the Ornamental Arch of size 3650 mm x 3700 mm for openings at Ground Floor level with decorative pillar designs of height 2.83m at ends, the archprovided at the bottom of the slab of Thorana vayil Entrance ( at the height of the 2.00 m from the Ground level ), stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 533 | Making the Ornamental pillar of size 230mm x 230mm of height 1230mm including Sudhai and stucco works in the pillarsas specified in the elevation drawingand as directed by the departmental officers. The rate includes ofMoulding, Casting, plastering, sythpathy work, materials, labour and finishing charges with the new pattern designas per approved elevation and finishing the new pattern. |
| 534 | Making the Ornamental broderall around the beams with stucco works as specified in the approved elevation drawing and as directed by the departmental officers. The rate includes, labour, transport and materials charges and finishing the new pattern as per approved elevation. |
| 535 | Redoing, Aligning and Levelling the Exisiting Brick Pillar / RCC Column Surface using the Cement Mortar 1: 5 with 20 mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 536 | Making the Ornamental Designs in the Auditorium Corridor Pillarin Cement Mortar 1: 5 , size of the top portion - 520 mm x 520 mm, Middle portion - 360 mm x 1040 mm, bottom - 520 mm x 900 mm as given in the approved drawings with standard specifications and as directed by the departmental officers. The rate includes, labour, transport and materials charges. |
| 537 | Making the Ornamental Designs in the Corridor Pillarin Cement Mortar 1: 5 , size of the brick pillar - 520 mm x 3300, approved designs should be done on the two sides of the pillaras given in the approved drawings with standard specifications and as directed by the departmental officers. The rate includes, labour, transport and materials charges. |
| 538 | Resizing the window Opening in the 150 mm thickRCC Wall of required size 600 mm x 1350 mm using suitable Machinery ,Plastering the wall surface using the Cement Mortar 1:3 around the window Opening including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 539 | Making the Ornamental window Arch of size 600 mm x 1350 mmwith decorative pillar as support of width 150 mm x 150 mm and stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 540 | Making the Ornamental Designs below the Ground floor Pillar using brickwork in Cement Mortar 1: 5 with necessary sthapathy works, size of the Bottom portion design - 925 mm x 1270mmas given in the approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 541 | Making the Ornamental Designs on the one side of the square pillar of size 620mmx 620mm and heigtht of 8100mm in the VIP entrance porch using Cement Mortar 1: 5 with necessary sthapathy works,given in the approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 542 | Making the Decorative Kalasam Designwith Overall depth of 885 mm on the top of Main entrance door at the VIP entrance porch supported by the ornamental pillarswith necessary sthapathy works,designs should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, RCC Lintel, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 543 | Making the Ornamental brick Handrailing designwith the balustrade 100 mm x 100 mmof height 634 mm is placed at equal intervals at 300 mm centre to centre with top railing of depth 179 mm and bottom railing of depth 134 mm , the designs of the handrailing should be as approved elevation drawings given by the departmental officers.The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 544 | Making Ornamental Pillar design of Size 300mm x 300mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 545 | Making Ornamental Pillar capital head of size 900mm and depth of 300mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 546 | Making Ornamental Beam drop band design with offests pattern alround structure above ornamental pillar of depth 230mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 547 | Making the Decorative button typeOrnamental border Designusing the Cement Mortar 1:5 around the Slab level of depth 124 mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 548 | Providing the ornamental "S" type curve elevation slab withbeambottom of curve three level of ornamental border with total height of 393mm alround with necessary sthapathy works.The Rate includes ofbrickwork, supports for the bottom, ornamental designs, plastering work, materials,labour and conveyance charges. |
| 549 | Making the Top kalasam of size1644mm x 1244mmincluding Band, Button type ornamental border design, "S" type curve elevation design with bands at various level and curves etc., with necessary stucco and sthapathy works as specified in the elevation drawing and as directed by the departmental officers. The rate includes the cost of materials, labour charges for the sthapathy works, conveyance charges and making ornamental design using brickwork and platering. |
| 550 | Making the Ornamental window Arch of size 1405 mm x 2861 mmwith decorative pillar as support of width 110 mm x 110 mm and stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 551 | Making the Ornamental window Arch of size 1405 mm x 3907 mmwith decorative pillar as support of width 110 mm x 110 mm and stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, brickwork, plastering using Cement Mortar 1 : 5, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 552 | Making the Ornamental window Arch of size 1405 mm x 1844 mmwith decorative pillar as support of width 110 mm x 110 mm and stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, materials, brickwork, plastering using Cement Mortar 1 : 5, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 553 | Making the Ornamental window Arch of size 3676 mm x 4714 mmwith decorative pillar as support of width 230 mm x 230 mm and stucco works in the arch as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythpathy work, brickwork, plastering using Cement Mortar 1 : 5, materials, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 554 | Enhancing the Edges and surafce of the Parapet wall of size 460 mm x 1100 mm of top arc length 600 mm with necessary sythapathy work, stucco works, as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythapathy work, materials, brickwork, plastering using Cement Mortar 1 : 5, removing the existing design,preparation of the surface, making the new pattern designas per approved elevation and finishing the new pattern. |
| 555 | Making the Sythapathy designs in the Lift wall with dimensions of1591 mmx 4697 mm with necessary sythapathy work, stucco works, as specified in the elevation drawingand as directed by the departmental officers. The rate includes of sythapathy work, materials,brickwork, plastering using Cement Mortar 1 : 5,making the new pattern designas per approved elevation and finishing the new pattern. |
| 556 | Making the Ornamental Designs alround the window with size of 1560 mm x 1850 mm with side pillar of height 960 mm with sythapathy works, stucco worksas specified in the elevation drawing and as directed by the departmental officers. The Rate includes of sythapathy work , materials , plastering, necessary brick work, making the new pattern designs as per elevation approved by the departmental officers. |
| 557 | Making the Ornamental Pedestal of size 640 mm x 1640 mm includes the capital head of 840 mm heightwith sythapathy works, stucco worksas specified in the elevation drawing and as directed by the departmental officers. The Rate includes of sythapathy work , materials , plastering, necessary brick work, making the new pattern designs as per elevation approved by the departmental officers. |
| 558 | Making the Ornamental Pedestal of size 450 mm x 1580 mm includes the capital head of 640 mm heightwith sythapathy works, stucco worksas specified in the elevation drawing and as directed by the departmental officers. The Rate includes of sythapathy work , materials , plastering, necessary brick work, making the new pattern designs as per elevation approved by the departmental officers. |
| 559 | Making the Ornamental Pillar of Size 300 mm x 300 mm with Overall height 3730mm , Ornamental base size of 710 mm x 1730 mm and ornamental captial pillar head width of 540 mm x 300 mm as specified in the elevation drawing and as directed by the departmental officers. The Rate includes of sythapathy work, materials, brick work, Plastering ,making the specified design pattern as approved in the elevation by the departmental officers. |
| 560 | Making Ornamental Beam drop band design with offests pattern alround structure above ornamental pillar of depth 330mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges. |
| 561 | Providing the ornamental "S" type curve elevationwithornamental border design curve with total height of 450 mm with necessary sythapathy works. The Rate includes ofbrickwork, supports for the bottom, ornamental designs, plastering work, materials,labour and conveyance charges. |
| 562 | Providing the series of kalasam design on the top of the arc head with ornamental band type design at the bottom ofnecessary sythapathy designs of height 600 mm , design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, necessary anchoring reinforcements,ornamental sthapathy works, materials charges and conveyance charges. |
| 563 | Refining the Kural Mani madam entrance wings ofarc length 6.00 m and wide of 1.27 m at center with ornamental designs, shades and shapes as per the approved drawings and as directed by the departmental officers. The rate includes ofpreparation of the exisiting surface,Ornamental designs, brickwork, plastering, painting with multi- colours with emulsion paint of approved brand and quality, sthapathy works, materials charges and conveyance charges. |
| 564 | Revamping the panjamugavoyil arch entrance of wide 5480 mm with arc length 11500 mm having thickness 750 mm with multi-layer of the ornamental stucco art work of requried shapes, shades, curves, geometry designs and elevation as per the approved drawings directed by the departmental officers. The rate includes ofpreparation of the exisiting surface,Ornamental designs,brickwork, plastering, painting with multi- colours with emulsion paint of approved brand and quality, sthapathy works, materials charges and conveyance charges. |
| 565 | Making the Ornamental designs of wide 390 mm with minimum thickness of 40 mm in the existing wall surface / RCC Surface for the sizeas per the approved designs in the elevation drawings and directed by the departmental officers. The rate includes ofpreparation of the exisiting surface, Ornamental designs,brickwork,plastering, painting with multi- colours with emulsion paint of approved brand and quality, sthapathy works, materials charges and conveyance charges. |
| 566 | Making the Ornamental Pillar of Size 330 mm x 330 mm with Overall height 3350 mm ,ornamental captial pillar head width of 750 mm with step down design with depth 200 mm as specified in the elevation drawing and as directed by the departmental officers. The Rate includes of sythapathy work, materials, brick work, Plastering ,making the specified design pattern as approved in the elevation by the departmental officers. |
| 567 | Making the Ornamental Pillar of Size 150 mm x 1500 mm with Overall height 2850mm ,ornamental captial pillar head width of 750 mm with step down design with depth 200 mm as specified in the elevation drawing and as directed by the departmental officers. The Rate includes of sythapathy work, materials, brick work, Plastering ,making the specified design pattern as approved in the elevation by the departmental officers. |
| 568 | Making Ornamental Beam alround bands and projection for the entrance arch with offests pattern alround structure above ornamental pillar of depth 900mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges. |
| 569 | Making Ornamental Pillar design for the entrance arch of Size 600mm x 600mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 570 | Making Ornamental Pillar capital head for the entrance arch ofdepth 1000mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 571 | Making Ornamental Pillar design for the main entrance arch of Size 450mm x 450mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 572 | Making Ornamental Pillar capital head for the entrance arch and depth of 680mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 573 | Making Ornamental Pillar design of Size 400mm x 400mm with necessary sthapathy works, brick works wherever necessary and the design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 574 | Making Ornamental Pillar capital head of depth 900mm with necessary sthapathy works, brick works wherever necessary and the design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 575 | Making Ornamental Beam drop band designfor Side entrance arch with offests pattern alround structure above ornamental pillar of depth 450mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using brickwork, plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 576 | Making the Decorative button typeOrnamental border Designfor Side entrance arch using the Cement Mortar 1:5 around the Slab level of depth 400 mm with necessary sthapathy works, design should be done as per approved drawings and as directed by the departmental officers. The rate includes making ornamental design using plastering, ornamental sthapathy works, materials charges and conveyance charges |
| 577 | Providing the ornamental "S" type curve elevation slab withbeambottom of curve three level of ornamental border with total height of 700mm alround with necessary sthapathy works.The Rate includes ofbrickwork, supports for the bottom, ornamental designs, plastering work, materials,labour and conveyance charges. |
| 578 | Making the Top kalasam of depth 850 mmincluding Band, Button type ornamental border design, "S" type curve elevation design with bands at various level and curves etc., with necessary stucco and sthapathy works as specified in the elevation drawing and as directed by the departmental officers. The rate includes the cost of materials, labour charges for the sthapathy works, conveyance charges and making ornamental design using brickwork and platering. |
| 579 | Supplying and erection of Stone Statue with circular base of dia 1"-7" with Overall height of 5"-2" of approved model shown by the departmental officers.The rate includes of Material, Labour, Erection Charges and Conveyance Charges. |
| 580 | Supplying and erection of Elephant Stone Statue of size 1800mm x 680mm with an average height of 1320 mmof approved model shown by the departmental officers.The rate includes of Material, Labour, Erection Charges and Conveyance Charges. |
| 581 | Clearing the Branches, leaves and wastage materials conveying and dumped in low places out side the campus to tipper loary load including loading and unloading chrages for etc., complete complying with std. Specification and as directed by the departmental officers. |
| 582 | Collecting the earth debris using tipper machinery from workspot and dumping the same into low area to a distance of 3 km away from the site etc., complete complying with standard specification and as directed by the Departmental officers. |
| 583 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) |
| 584 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (5 points / Coil) |
| 585 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire with painting of Suitable colourfor PVC Light point / fan point (for electronic regulator) (3 points / Coil) |
| 586 | LED lights Supply and Fixing of 1 x 18W / 22W 4 Feet LED Fitting with20W LED Tube Light for T8 Fitting (Single side) on wall / Ceilingwith PVC unsheathed copper leads from terminals with suitable necessary connections. (Service & Stair case) |
| 587 | Supply and fixing of 1x1 LED fitting on ceiling with necessary connections. |
| 588 | Supply & Fixing ofFull Glow G6 RC380B LED 36S - 6500 G6 L60W60 PSU OD 2x2 LED false ceiling fitting with suitable necessary connections. (Philips / Havells / Jaquar / Equivalent) |
| 589 | Supply and fixing of Green perform Sleek round LED 12W false ceiling fitting with necessary connections. (Philips / Havells / Jaquar / Equivalent) |
| 590 | Supply and fixing of surface mounted Dome ceiling light 32watts with necessary connections.(Philips / Havells / Jaquar / Equivalent) (Hall) |
| 591 | Supply and fixing of Green perform Sleek LED 32 watts round / Dome LED surface mounted ceiling fitting with necessary connections.(Philips / Havells / Jaquar / Equivalent)(Corridors) |
| 592 | Supply and fixing of surface mounted mini chandelier with necessary connections.(Philips / Havells / Jaquar / Equivalent) |
| 593 | Supply and Fixing ofLancia Gold CHL-GLD-AS8051B model Decorative light Ceiling area Fitting with PVC unsheathed leads from terminals to the fittings with necessary connections.(Jaquar/ Equivalent Make) |
| 594 | Supply & Fixing of 7W COB Tilt LED Spot light (WW) LED fitting for metric false ceilingfitting. (Philips/Havells/Jaquar/Equivalent) |
| 595 | Supply & Fixing of 7W Sky COB Tilt LED Spot light (WW) LED fitting for metric false ceilingfitting. (Philips / Havells / Jaquar / Equivalent) |
| 596 | Supply and Fixing of Jaquar/ Equivalent Make CHL-GLD-AS4031A model Honey comb chandelier with asfour almaaza crystal light on wall / Ceilingwith PVC unsheathed copper leads from terminals with suitable necessary connections.(Hall) |
| 597 | Supply and Fixing of CHL-SKG-ASCARL0095436C model Carina chandelier with asfour almaaza crystal & sk gold finish light on wall / Ceilingwith PVC unsheathed copper leads from terminals with suitable necessary connections. (Hall)(Jaquar/ Equivalent Make) |
| 598 | Supply, erection painting and finishing of base frame with 50x50 aluminum channel as a supporter to ceiling and base plate suitable to stretch ceiling fitting by using 19mm plywood.(Stage) |
| 599 | Supply, erection, testing and commissioning of dimmable type stretch ceiling fitting with premium translucent PVC membrane with aluminum channels and high quality PVC harpoon strengthening the periphery PVC membrane adhering to EN 14716 standards, Made in Germany customized at state of the art ISO 9001:2015 certified manufacturingfacility in India with following test certificates: 1) UL Classified. 2) Fire : b-s 1-d0. 3) No Heavy Metals* A+ Emission code: EC2-TR-015. (Stage) |
| 600 | Supply of R7 Tunable remote.(Stage) |
| 601 | Supply and Fixing of Ranger 70W 3000K 30deg x 60deg LHEPBOU5PS7 J070 with IP 66 junction box with suitable necessary connections.(Stage)(Havells Make/ Equivalent) |
| 602 | Supply & Fixing of Cove lights Flex cove IP20 L5000 per Mtr (WW) with Modern square aluminium profile with diffuser, end cable, back clip, driver and necessary accessories with suitable necessary connections.(Philips / Havells / Jaquar / Equivalent) . |
| 603 | Supply & Fixing ofmake SKY PRO LED Strip Sky pro LED / 5 Mtr without driver (WW) strip LED fitting with dirver for false ceiling fitting with suitable necessary connections. (Philips/ Equivalent make) |
| 604 | Supply & Fixing ofsurface mounted bulk head fittingHEXAFT10WLED85 7SSYMBOPCfor lift shaft. (Havells/ Equivalent make) |
| 605 | Supply & Fixing of Luker / Equivalent Make HELIOS - MIRROR LIGHTS LMR9 on wall.(Luker / Equivalent Make) |
| 606 | Supply and fixing ofSmartbright BRPO62 LED 68CWSLC S1 PSU With 32mm dia GI Pipe Complete on the Existing Post/Wall with Synthetic Moulded Compound Box for street Light with necessary Connection. (Philips/ Equivalent make) |
| 607 | Garden and External lights Supply and fixing of Disc type Bollard with 10watts warm white LED bollard fitting with Foundation Bolt and Nuts and Earth work for Civil Masonry work with suitable necessary connections. (Jaquar / K lite / Philips / Havells / Equivalent) |
| 608 | Supply and Fixing of K Lite/ Equivalent Make 45W watts single side post top light with ornamental lighting size Circular lighting pole - 89 series Ht. 4270mm - Arm - Pole size : 88.9 - Pole type : P7 with post top light Genesis [Dimension : 480 x 417 x 850mm] 45W LED, Integral, Translucent Acrylic with Foundation Bolt and Nuts & Earth work for Civil Masonry work with suitable necessary connections. |
| 609 | Supply and Fixing of45W watts double side post top light with ornamental lighting Pole size Empire Florus Lighting Pole Ht.4270mm - Double Arm - Pole Size : Ø88.9 - Pole Type : P18 with post top light Genesis [Dimension : 480 x 417 x 850mm] 45W LED, Integral, Translucent Acrylic with Foundation Bolt and Nuts & Earth work for Civil Masonry work with suitable necessary connections. Foundation Bolt and Nuts & Earth work for Civil Masonry work with suitable necessary connections. (K Lite/ Equivalent Make) |
| 610 | Supply and Fixing ofMini MAST AREA LIGHTING POLESModel SPORT KING ID KP-4724 Dual Sport King Lighting Pole Ht. 10000mm - Double, Arm - Pole Size : Ø114.3 / Ø139.7 - Pole Type : P8 mounting on floor level with Foundation Bolt and Nuts and Earth work for Civil Masonry work with suitable necessary connections. (K Lite/ Equivalent Make) |
| 611 | Supply and fixing of Realm surafce light 2LS E14 CRM 250mm surface mounted mini chandelier with necessary connections. (Philips / Havells/Jaquar/Equivalent) (VIP Lobby). |
| 612 | Supply and Fixing ofCHL-SKG-14844x15C model Ursa chandelier with SK gold finish light on wall / Ceilingwith PVC unsheathed copper leads from terminals with suitable necessary connections. (VIP Lobby).(Jaquar/ Equivalent Make) |
| 613 | Supply and fixing of Bema 7 round LED 22W on surface mounted fitting with necessary connections. (Thorana Vail)(K Lite/ Equivalent Make) |
| 614 | Supply & Fixing of 12W COB 60° Tilt LED Spot light (WW) LED fitting for metric false ceilingfitting. (Philips / Havells / Jaquar / Equivalent)(Auditorium Pillars) |
| 615 | Supply & Fixing of20 watts LED focus light with narrow beam angle LED fitting in ground with necessary connections. (Statues) (Futura/ Equivalent Make) |
| 616 | Supply and Fixing of 50w Flood LED light fitting on wall / Exisiting post with PVC unsheathed copper leads from terminals with suitable necessary connections. (Philips / Havells / Jaquar / Equivalent) (Terrace) |
| 617 | Supply and Fixing ofFlexilineled 7.2W / M 3000K with IP67 female connector, LED dirver with IP 66 junction box andfitting mounted on ceiling with suitable necessary connections. (Havells/ Equivalent make) |
| 618 | Supply and Fixing of 25W LED Gate light fitting with PVC unsheathed copper leads from terminals with suitable necessary connections. (Philips / Havells / Jaquar / Equivalent). |
| 619 | Supply and fixing of6 watts LED wall washer with built in control gear 300mm wall washer LED fittings with necessary connections. (Compound Wall)(Futura/ Equivalent Make) |
| 620 | Supply and fixing ofPRO TELE FPE086 / 7W / GR APHITE GRAY/3000K/spot light with necessary connections. (Futura/ Equivalent Make) |
| 621 | Supply and Fixing ofJNL - BRS - SLPEA020BE27 PENDANT fixture with 9W LED bulb on wall / Ceiling with PVC unsheathed copper leads from terminals with suitable necessary connections. (Terrace & Cafeteria) (Jaquar/ Equivalent Make) |
| 622 | Supply & Fixing ofHi-speed 1200 mm (48”) AC ceilingfan complete with fan step regulator with 1.5mtr down rod. (Crompton/ Equivalent make) |
| 623 | Supply & Fixing of 16” Oscillating typeWall mounted fan on the wall. (Havells/ Equivalent make) |
| 624 | Supply and fixing of 375mm (12") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making of the wall. |
| 625 | Supply and fixing of 375mm (15") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making of the wall. |
| 626 | Supply and fixing of 1 no.6A two module 5 pin socket, 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. |
| 627 | Supply and fixing of 1 no.6A two module socket, 1no. 6/16A two module socket, 1 no. 6A one module switch, 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. |
| 628 | Supply and fixing of 1no.6A two module socket, 1 no. 6/16A two module socket, 1 no. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. |
| 629 | Supply and fixing of 3nos.6A two module socket, 1 no. 6/16A two module socket, 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. |
| 630 | Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. |
| 631 | Supply and Fixing of 25A DP Mini MCB "C" Series DCVNCDPA025 Crabtree with Suitable 2 Nos 2M Modular metal box with suitable front cover plates 25A 3 Pin Modular Socket& 25A Top flush with wall with necessary earth connection (Crabtree/ Equivalent) |
| 632 | Supply and fixing of 100A FP MCB (legrand Make) with suitable Sheet steel enclosure box on wall with earth connection. (legrand/ Equivalent Make) |
| 633 | Supply and fixing of 6 - 32A DP MCBwith suitable Sheet steel enclosure box on wall with earth connection.(legrand/ Equivalent Make) |
| 634 | Supply and fixing of 6 - 32A DP MCBwith Suitable Synthetic Moulded Compound Box on wall with earth connection. (legrand/ Equivalent Make) |
| 635 | Supply and fixing of 125A TPN Switch Disconnector Fuse Units in Sheet Steel Enclosure with HRC fuses Double Break on suitable angle iron frame work on wall with MS cable entry boxes with PWD earthing. |
| 636 | Supply and fixing of 125A Change Over switch with size II enclousure for DU 250C / DU250 / DN1 (CM91003OOOO) on wallwith necessary earth connection. (L&T/ Equivalent make) |
| 637 | Supply and fixing of 250A Change Over switch withsize II enclousure for DU 250C / DU250 / DN1 (CM91003OOOO) on wallwith necessary earth connection.(L&T/ Equivalent make) |
| 638 | Supply and fixing of 8 way TPN vertical MCCB DB with 125A 4pole DU MCCB as incoming and 8 Nos 63A TPMCB as outgoing on wall with bushes with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Like Legrand / Hager / MDS / L&T make). |
| 639 | Supply and fixing of 6 way TPN vertical MCCB DB with 125A 4pole DU MCCB as incoming and 6 Nos 63A TPMCB as outgoing on wall with bushes with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Like Legrand / Hager / MDS / L&T make). |
| 640 | Supply and fixing of Vertical type 4 way MCCB DB enclosure Double door with IP 43 protection with four Pole 125 Amps MCCB as incoming and 4 Nos Triple pole MCB 63A, 10KA as outgoing on wall and making good with earth connection. The MCBDB and MCB"s should be with the ISI mark. |
| 641 | Supply and fixing of Verticaltype 8 way MCB DB enclosure metal door with IP 42 protection with Triple Pole 125 Amps MCB as incoming and 8 Nos Triple pole MCB 63A, 10KA as outgoingin flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB"s should be with the ISI mark. (DATA - 49). |
| 642 | Supply and fixing of Vertical type 6 way MCB DB enclosure acrylic door with IP 42 protection with Four Pole 100 Amps MCB as incoming and 6 Nos Triple pole MCB 6A to 32A, 10KA as outgoing on wall and making good with earth connection. The MCBDB and MCB"s should be with the ISI mark. |
| 643 | Supply and fixing of Verticaltype 6 way MCB DB enclosure metal door with IP 43 protection with four Pole 63 Amps MCB as incoming and 4 Nos Triple pole MCB 6A to 32A, 10KA as outgoing on suitable angle iron frame on wall with earth connection. The MCBDB and MCB"s should be with the ISI mark. |
| 644 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 4 nos. 6A to 32A 3P MCB as outgoing in flush with wall with earth connection. |
| 645 | Supply and fixing of 4way TPN vertical DB with 63A 4pole MCB as incoming and 4Nos 6A - 32A TPMCB as outgoing on wall with bushes with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Like Legrand / Hager / MDS / L&T make). |
| 646 | Supply and fixing of Verticaltype 4 way MCB DB enclosure metal door with IP 42 protection with Triple Pole 100 Amps MCB as incoming and 4 Nos Triple pole MCB 6A to 32A, 10KA as outgoingin flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB"s should be with the ISI mark. |
| 647 | Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. |
| 648 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. |
| 649 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. |
| 650 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. |
| 651 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. |
| 652 | Supply and fixing of Pillar box as enclosure of Vertical type 4 way MCB DB enclosure metal door with IP 42 protection with four Pole 100 Amps MCB isolator as incoming and 4 Nos Triple pole MCB 6A to 32A, 10KA as outgoing on wall with earth connection. (The MCCB DB, MCB"s & Isolators should beof Legrand/Hager / Equivalent make) |
| 653 | Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. |
| 654 | Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. |
| 655 | Supply and run 2 of 4 sq.mm (56/0.3) PVC insulated sc unsheathed cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitablecolour |
| 656 | Supply and run 2 of 4 sq.mm (56/0.3) PVC insulated sc unsheathed cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour |
| 657 | Supply and run 2 of 6 sq.mm (84/0.3) PVC insulated sc unsheathed cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitablecolour |
| 658 | Supply and run of 4 core of 4 sq.mm (56/0.30) PVC unsheathed Flexible Cable copper conductor of 1100V grade on wall and ceiling with continuous earth wire connection. |
| 659 | Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. |
| 660 | Supply and Run of 4 of 16 sq.mm. (101/0.45) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. |
| 661 | Supply and providing cable end termination of 4 x 16 sq.mm. PVC insulated SC unsheathed copper conductor with necessary copper cable sockets by crimping etc with electrical connection complete. |
| 662 | Supply and run of 4 of 16 sq.mm (101/0.45) PVC insulated sc unsheathed cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. |
| 663 | Supply and run of 4 of 25 sq.mm (168 / 0.25) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. |
| 664 | Supply and providing cable end termination of 4 x 25 sq.mm. PVC insulated SC unsheathed copper conductor with necessary copper cable sockets by crimping etc with electrical connection complete. |
| 665 | Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (External Lighting Poles) |
| 666 | Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. |
| 667 | Supply and providing cable end termination of 4x16 sq.mm. PVC insulated SC unsheathed copper conductor with necessary copper cable sockets by crimping etc with electrical connection complete. |
| 668 | Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 669 | Supply and clarnping of 3 1/2 x 25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. |
| 670 | Supply and fixing of brass cable gland for 3 1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection. |
| 671 | Supply and providing cable end termination of 3 1/2 x 25 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable socket by crimping etc., with electrical connection complete. |
| 672 | Supply and Laying of 3 1/2 x 50 sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 673 | Supply and clarnping of 3 1/2 x 50 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps. |
| 674 | Supply and fixing of brass cable gland for 3 1/2 x 50 sq.mm PVC armoured LTUG cable with earth connection. |
| 675 | Supply and providing cable end termination of 3 1/2 x 50 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable socket by crimping etc., with electrical connection complete. |
| 676 | Supply and clarnping of 3 1/2 x 95 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (Pillar Box) |
| 677 | Supply and Laying of 3 1/2 x 95 sq.mm PVC armoured LTUG Cable in trench to be excavated at a depth of 0.75 metre and covering the cable completely with 2 1/2" G.I pipe and refilling the earth to make good and necessary concrete work etc., (Pillar Box) |
| 678 | Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (Pillar Box) |
| 679 | Supply and fixing of brass cable gland for3 1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection. |
| 680 | Supply and providing cable end termination of 3 1/2 x 95 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable socket by crimping etc., with electrical connection complete. |
| 681 | Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 682 | Supply and clarnping of 3 1/2 x 120 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps. |
| 683 | Supply and fixing of brass cable gland for 3 1/2 x 120 sq.mm PVC armoured LTUG cable with earth connection. |
| 684 | Supply and providing cable end termination of 3 1/2 x 120 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable socket by crimping etc., with electrical connection complete. |
| 685 | Supply and laying of 11KV 3 core 300 sq.mm XLPE HT UG cable in a trench to be excavated at 1.0 Mtr. and covering the cables completely with RCC. Truff and refilling the earth to make good. (RMG to VCB, VCB to Tranformer). |
| 686 | Supply and clamping of 11KV 3 core 300 sq.mm XLPE HT UG cable in Wall or the existing trench in HT Room.(RMG to VCB, VCB to Tranformer). |
| 687 | Supply and providing cable end termination suitable for 11KV 3 core 300 sq.mm XLPE HTUG cable with necessary indoor type heat / cold shrinkable joint kit and accessories (Make : Ray Chem. / M Seal) |
| 688 | Supply and laying of 3 runs 3 ½x 400 Sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 meterputting 0.15mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.(Transformer 1&2 to ACB panel 1&2) |
| 689 | Supply and clamping of 3 runs 3 1/2 x 400 Sqmm PVC LTUG armoured LTUG cable with earth connection. |
| 690 | Supply and fixing of brass cable gland for 3 1/2 x 400 sq.mm. PVC armoured LTUG cable with earth connection. |
| 691 | Supply and providing cable end termination of 3 ½ x 400 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete |
| 692 | Supply and laying of 2runs 3 ½x 240 Sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 meterputting 0.15mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.(MV Panel to Essiential Panel) |
| 693 | Supply and clamping of 2 runs 31/2 x 240 Sqmm PVC LTUG armoured LTUG cable with earth connection. |
| 694 | Supply and clarnping of 3 1/2 x 240 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (MV panel to AC panels & lighting & power panels) |
| 695 | Supply and Laying of 3 1/2 x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 696 | Supply and fixing of brass cable gland for 3 1/2 x 240 sqmm PVC armoured LTUG cable with earth connection. |
| 697 | Supply and providing cable end termination of 3 1/2 x 240 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. |
| 698 | Supply and Laying of 2 runs of 3 1/2 x 185 sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 699 | Supply and clarnping of 2 runs of 31/2 x 185 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. |
| 700 | Supply and laying of 3 ½x 185 Sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 meterputting 0.15mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (Generator to lighting panel) |
| 701 | Supply and clamping of 31/2 x 185 Sqmm PVC LTUG armoured LTUG cablewith earth connection. |
| 702 | Supply and fixing of brass cable gland for 3 ½x 185 Sqmm PVC armoured LTUG cable with earth connection. |
| 703 | Supply and providing cable end termination of 3 ½ x 185 Sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete |
| 704 | Supply and fixing of Cable Management Box Size 100mmx50mm including Labour charges for neatly arranging the cables & wires. |
| 705 | Supply and fixing of Cable Management Box Size 100mm x 50mm End Cap and Joint Cover including Labour charges. |
| 706 | HT Supply Supply, Erection, testing and commissioning of 11KV 25 KA 630Amps 3 Panel HT indoor RING MAIN GEAR Switch board suitable for indoor installation comprising two incomer panels with Air Break/ load Breaks switches and one outgoing panel with Vacuum Circuit Breaker completeconfirming to TANGEDCO standard specificationand as per the following specificationwith Mechanical inter lock between incomers 1. Supply and Erection of draw out type 11KV 25 KA 630 Amps Horizontal draw out./Horizontal Isolation VACCUM CIRCUIT BREAKER fitted with motor (230V AC) operated spring charged Mechanism, with ON and Off mechanical indicator Anti pumping Device, 110V DC shunt trip and closing coils ( DC source of supply to be derived from a power pack suitable for three Tripping and two closing operations incorporated on Incoming panel only) Mechanical Operation counter, 4 No + NC spare Aux contact with contact multiplication contractor for customer use. Automatic safety shitter, Mechanical close/Trip Knob, Mechanical ON/OFF Indication, operating Handle, 230V AC to 110V DC power pack operating handle |
| 707 | 2. Supply and Erection of 11KV 630 Amps 25 KA HT Air Break/Load Break switch with mechanically inter locked each switch, front operated spring assisted manual closing mechanism 2NO + 2NC Aux contact. 3. 11 KV /Root 3/110V Root 3-Three phase 3 Limb 50 VA class 0.2 Resin cast Draw out type potential Transformer complete with HT and LT HRC fuses with sealing arrangement – 3Nos 4. Current Transformer of suitable Ratio/5-5A Dual core ( Core1-5VA clas 0.2 for metering & crore 2-15 VA 5 P 20 for protection – 3Nos 5. Meters: Analog Ammeter with 5 position selector switch-1no Analog Voltmeter with selector switch-1No cut out provision to receive digital Tri Vector Meter L & T or secure to be provided. 6. Protection: IDMT two over current and one earth fault Relay with high set Inst. Elements 1.3 seconds-1No Master Trip relay Megawin MVAJH 13 equivalent – 1No 7. Breaker ON/OFF indication LED type-2Nos Auto Trip/Healthy Trip and spring charged indication LED type – 3Nos phase indicating Lamps 8. TNC Breaker control switch-1No Local Remote selector switch -1No push button for trip Healthy -1No 9. Panel Mounting Surge Arrester 9KV,10KA -3Nos 10. 630Amps copper bus bar PVC sleeved & required panel earthing 11. Submission of RMG Drawings to TANGEDCO, arranging CT/PT Inspection and obtaining TANGEDCOapproval. |
| 708 | Indoor Three Panel Consumer VCB: Supply, erection, testing, commissioning and of 11KV 25KA HT Three panel Vacuum Circuit Breaker Switch, Indoortype forinstallation, board comprising one Incomer VCB and 2 Nos Outgoing 630A 500MVA VCB.1.Draw out type 11KV 500MVA 630A Horizontal Draw out/ Horizontal Isolation VCB operated with spring charged mechanism.Anti Pumping device ,110V DC Shunt Trip and closing Coils (DC source of supply to be derived from a Power pack suitable for 3 Tripping and Two closing operation counter, 4NO + 4NC spare Aux. Contact for customer use, Automatic safety D109shutter, Mechanical Close/ Trip knob, Mechanical ON/OFF indication, Operating Handle, 110V AC-D109110V DC Power Pack etc. (Incom-1 & Outgoing-2Nos)Core(Core 1-15VA class 1 for metering and core 2-15VA 5P 10 for Protection) Incoming 1 No, Current Transformers of 30/5-5 Amps Dual Core (Core 1-15VA Class 1 for Metering and Core 2-15VA 5P 10 for Protection) (Outgoing-1)4.Meters: 2.11KV/Root 3/ 110V/ Root3- Three Phase, 3 Limb 200VA Class 1 Resin Cast Draw out type Potential transformers complete with HT and LT HRC fuses (Incoming-1 No). |
| 709 | Digital Voltmeter with selector switch (Incoming 1 No) Digital Trivector of L&T/Secure make (Incom-1No) Digital Power Factor Meter (Incom-1 No) Digital Frquency Meter (Incom-1 No) 5. Protection: TP ND IDMT 2OC + 1EF Relay with Highest inst.Elements similar like Megawin type MCDG 61 (Incom-1No)6. TP ND IDMT 2OC + 1 EF Relay similar like Megawin type MCDG 31 Master trip Relay Megawin MVAJH 13 (Incom-1No & Out-1 No)7. Breaker ON/OFF/Auto Trip/Healthy/Spring Charged Indication Lamp LED Type 8. Phase Indication Lamps R,Y,B (Incomings 3Nos)9. Control Wiring 10. 800Amps Copper Bus bar PVC Sleeved and required panel copper earthing.11. Control switch TNC (Incoming-1 No, Outgoing -1No) |
| 710 | Supply, erection, testing and commissioning of 500KVA / 11KV / 433V off load tap changing copper wound Outdoor type distribution transformer conforming to relevant IS1180 Level-2 standard and fitted with the following : a) HV cable end box suitable for connecting 3 core 185 sqmm 11 KV, XLPE HT cable b) LT cable end box suitable for connecting 3 runs of 3 ½ x 400 sqmm LTUG cable c) Conservator with shut off valve d) Conservator drain plug valve e) Dehydration silicagel breather f) Expansion vent |
| 711 | g) 4 Nos. plain rollers h) Thermometer pocket with dial type thermometer with capillary tubing with maximum reading position i) Drain plug / valve) Filter valve k) Oil filling hole and cap l) Oil level gauge m) Two body earthing terminals n) Rating and terminal marketing plate. o) Lifting hooks / lifting eyes, jacking pad to facilitate movement of transformer and easy handling. p) OFF load hand operated tap changing switch at standing height from ground level. q) Tapping on primary widing for voltage and vaiation 5% to + 5% r) Neutral on LV side to be available for 4 wire supply and brought out through busing for earthing. s) Air release device t) The transformer should be supplied with first filling of oil. u) All removable covers shall be provided with weather proof hot oil resistant, resistant gaskets to prevent leakage of water into core oil from the tank (CREL/ Row son’s / Voltech / IPL ) |
| 712 | Design, Supply, erection, testing andcommissioning of 1600A draw out type floor mounted MV cubical bus bar chamber dust and vermin proof and accommodating the following switch and 2 Nos. ACB as Incomer units with the following items of work complete to satisfy the latest IS rules and CEIG guidelines. Supply and fixing of suitable size bus bar chamber made up of 16 SWG MS sheet steel with 4 Nos. of 2 runs off 2” X 1/2” tinned copper bus bar for 3phases and neutral and 2 Nos. of earthing bus of size 1” X 1/8tinned copper bus on suitable bus bar insulator (Epoxy insulator) with maximum creepage distance and supported on MS Base channel frame work of size 4” X 2” X ¼” – 1 Set. Incoming:- 1)Supply and fixing of 2 Nos. 800A basic rating 4 pole 433V LT ACB confirming to IS 13947 – 2 IEC 60947 – 2 with making capacity of 50 KA and breaking capacity of 50KA at 600V AC with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with micro processor SR 18 G relay, over current |
| 713 | device adjustable to LTD, STD and release for over current protection UV release with time delay, EF release short circuit protection, Mains CTs for 3 phases lockout, features, separate mould base for each pole for easy maintenance all relevant protection safety accessories as per CEIG, IE rules in force with inter connection and terminations as required inspecification. 2) Supply and fixing of 1No 1600A basic rating 4 pole 433V LT ACBBus Coupler confirming to IS 13947 – 2 IEC 60947 – 2 with making capacity of 50 KA and breaking capacity of 50KA at 600V AC with all accessories for standard horizontal manual draw out type ACB equipped with auxiliary contacts and all accessories for closing and opening operation with micro processor SR 18 G ( without protection) |
| 714 | Outgoing:- 1) Supply and fixing of 630A TP MCCB– 2 Nos. 2) Supply and fixing of 400A TP MCCB– 6 Nos. 3) Supply and fixing of 250A TP MCCB – 4 Nos. 4) Supply and fixing of 125A TP MCCB – 2 Nos. 1600Amps 4 pole bus couplerinter connecting all the LT ACB and MCCB’s to bus bar with suitable insulated tinned copper flats and painting of phases and neutral indication. Double Earth connection of the switches and ACB’s to earth bus using suitable tinned copper flats Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments with in the cubicle by CEIG rules with, 2 sets, of supply and fixingElectronic multifunctional meter class 1.0 flush mounting L&T make 1 No of supplying and fixing of earth fault relay with necessary CT arrangement ( L&T) make supply and fixing of danger board with spray painting the entire panel with 1 coat of red oxide primer and 2 cost of super synthetics enamel metallic paint with super scribing the direction of cables etc., erection of panel board complete with suitable foundation bolts and nuts including commissioning ( All switches and ACB s are of L&T / C+S/ ABB/ Siemens/GE make/Equivalent. |
| 715 | Design, supply, erection testing commissioning and handling over of 150 KVARcapacity automatic power factor control panel with 150KVARcapacitors with the following specifications. L&T eta sys –MU contactor switched standard APFC panel / equivalent capacitors – LT XL ultra heavy duty capacitors. Incomer – 400 A MCCB Branch protection – MCCB Switching – Auto + manual |
| 716 | 1) Automatic power factor controller: Power factor controller for 150 KVAR capacitor bank indigenously designed , micro controller based programmable controller, works designed, micro controller based programmable controller, works three phase and switching on the suitable capacitor banks and maintaining the PF to the Optimum. The controller is to have a scrollingLCD display which shows instantaneous voltage and current of all the three phases KW, KVA, RKVA and PF indication for the number of banks ON/ OFF load imbalance and protection for low / High voltage, single phasing and phase sequence. |
| 717 | 2) Supply and fixing of suitable power supply unit for the power factor controller. 3) Supply and fixing of current voltage Transducers of ratio 400 : 1 to measure current and voltage in all the three phases. 4) Supply and fixing of suitable current limiters to cater the inrush current. 5) Supply and fixing of 400A MCCB as incoming to the panel. 6) Supply and fixing of suitable MCCBs for switching ON and OFF of I to VI stage wise capacitors of the capacitor. 7) Supply and fixing of contactors of suitable rating for switching ON& OFF of the capacitors in various stage of L & T make/ equivalent. 8) Supply and fixing of 150 KVAR capacitor 440V ,50 HZ Delta connected L&T LT/L ultra heavy duty capacitors make/ equivalent in 6 stages in steps.Stage wise details: I stage:1Kvar, II stage: 2Kvar, III stage: 4.2Kvar, IV stage: 5Kvar, V stage: 7.5Kvar, VI stage: 10Kvar, VII stage: 20Kvar, VIII stage: 20Kvar, IX stage: 20Kvar, X stage: 20Kvar, XI stage: 20Kvar, XII stage: 20Kvar. Supply and fixing of a power coated cabinet of 18 SWG / CRCA sheet steel to enclose all the above items. |
| 718 | Supply andErection of 630A capacity dust and vermin proofcubical panel board size of (6’x7’x2) made up of 16 SWG CRCA sheet steel with supply and fixing of the following MCCB switch arrangement in vertical rows Two for switches with a bus bar chamber andcable chamber and cable alloy confirming to IE rules INCOMER 630A 3 Pole MCCB - 1NoOUTGOING 1) 400A MCCB - 2 Nos 2) 250A MCCB - 3 Nos 3) 125A MCCB - 2 Nos (All theMCCB"s shouldbe Siemens/L&T) The bus bar chamber with consist of 4Nos 2” x 5/8” tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans 2Nos 1/8” tinned copper flats should be provided all round the panel of earth bus. The fuse switches should be connected with the phase and neutral buses with suitable size of rigid copper flat/rod with suitable lugs phase and neutral tinned buses should be tinned properly. |
| 719 | The panel should be powder coat paint of approved colourapproved by the site officer and also the danger board. The capacity of the switches size of incoming and out going cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mmx 50mmx MS channel provided all around the bottom of the panel. The whole arrangement should be erection of a angle iron frame pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with necessary earth connection. |
| 720 | Supply andErection of 400A capacity dust and vermin proofcubical panel board size of (6’x7’x2) made up of 16 SWG CRCA sheet steel with supply and fixing of the following MCCB switch arrangement in vertical rows Two for switches with a bus bar chamber andcable chamber and cable alloy confirming to IE rules INCOMER 400A 3 Pole MCCB -1NoOUTGOING 1) 250A MCCB - 2 Nos 2) 125A MCCB - 4 Nos 3) 63A MCCB-4 Nos (All theMCCB"s shouldbe Siemens/L&T) The bus bar chamber with consist of 4Nos 2” x 1/4” tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans 2 Nos 1/8” tinned copper flats should be provided all round the panel of earth bus. The fuse switches should be connected with the phase and neutral buses with suitable size of rigid copper flat/rod with suitable lugs phase and neutral tinned buses should be tinned properly. |
| 721 | The panel should be powder coat paint of approved colourapproved by the site officer and also the danger board. The capacity of the switches size of incoming and out going cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mmx 50mmx MS channel provided all around the bottom of the panel. The whole arrangement should be erection of a angle iron frame pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with necessary earth connection. |
| 722 | Supply andErection of 400A capacity dust and vermin proofcubical panel board size of (6’x7’x2) made up of 16 SWG CRCA sheet steel with supply and fixing of the following MCCB switch arrangement in vertical rows Two for switches with a bus bar chamber andcable chamber and cable alloy confirming to IE rules INCOMER 400A 3 Pole MCCB -1NoOUTGOING 1) 125A MCCB - 2 Nos2) 63A MCCB - 4 Nos (All theMCCB"s shouldbe Siemens/L&T/ Equivalent) The bus bar chamber with consist of 4Nos 2” x 1/4” tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partisans 2 Nos 1/8” tinned copper flats should be provided all round the panel of earth bus. The fuse switches should be connected with the phase and neutral buses with suitable size of rigid copper flat/rod with suitable lugs phase and neutral tinned buses should be tinned properly. |
| 723 | The panel should be powder coat paint of approved colourapproved by the site officer and also the danger board. The capacity of the switches size of incoming and out going cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mmx 50mmx MS channel provided all around the bottom of the panel. The whole arrangement should be erection of a angle iron frame pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with necessary earth connection. |
| 724 | Supply and Erection of 250A capacity dust and vermin proof cubical panel board size of6’x5’x2’ made up of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting switcheswith centre bus chamber andvertical covers, cable chamber on both side of the bus bar chamber at the extreme ends on both side and confirming in I.S specifications. INCOMER 250A, 4pole, MCCBs L&T / Equvlt make - 1NoOUTGOING 1) 125A,3pole, MCCBs L&T / Equvlt - 4Nos 2)63A,3pole, MCCBsL&T / Equvlt - 2Nos |
| 725 | A separate on top of the one side should be built with (0-500V) voltmeter (0-250A) Ammeter C.T selector switches with one set of LED pilot lamps set with fuse base top with 10A HRC link for 3phases (Siemens) the bus will have 3Nos of 25x3mmbus for 3Phase and 1No neutral by 25x3mm copper flat and 2Nos by 25mmx3mm copper flat for earth bus all round the panel to provide double earth connections to the cubical switches cable glands cable adopter box etc, bus should be mounted on synthetic enamel compound bus supports at equal interval as IS specifications. |
| 726 | The incoming 250A MCCB should be connected to the bus with same size 3x25x6mm fixed copper flat and125A MCCB should be connected to the bus by3x25x3mm fixed copper flat. The switch should be separated by 6mm thick hylem sheet separators and properly double earthed as per IE rules. CEIG specifications. The panel should be powder coat paint of approved colour approved by the site officer and also the danger board. The capacity of the MCCB size of incoming and outgoing cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mmx 50mmx MS channel provided all around the bottom of the panel. The whole arrangement should be erection of an angle iron frame pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with necessary earth connection. |
| 727 | Supply, Erection, Testing and Commissioning of 5KVA UPS system for the following configuration. 1) True ON line - UPS Systems with pulse width modulation (PWM) Technology using IGBT inverter. 2) INPUT Voltage Range : 170v - 270v. 3) Output Voltage : 230v + or - 1%. 4) DC Volt: 120v. 5)INPUT Frequency : 50 Hz + or - 5%. 6) OUTPUT Frequency : 50 Hz + or - 2%. 7) OUTPUT Waveform : Pure Sine Wave. 8) Load Power Factor : 0.8 to Unity. 9) Harmonic Distoration : Less than 5%. |
| 728 | 10) Over Load : 125% for 10minutes.11) Inverter Operation : PWM - IGBT. 12) Inverter Efficience : Better than 90%. 13) OPERATING TEMPERATURE : 0 to 50 deg centigrade"s on Full Load.14) Digital Panel Meter : To Read output A/C volts, Out[ut D/C volts frequency.15) By Pass : Manual 16) Protection (INBUILT):a) Output Under Voltageb) Output Over Volatge c) Output Overloadd) OutputShort circuite) HRC Fuses, Output & Battery f) Battery Low trip g) Battery Charging Current Limit. |
| 729 | 17) INDICATIONS: a) Main ON b) Inverter ON c) Load on UPS d) Battery Low e) Overload f) Inverter Trip. |
| 730 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class "B" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. |
| 731 | Supply and Providing of maintenance free earthing electrode dual pipe flat technology model maintenance free earth 502 consist of 2mtr long 47mm dia outer pipe with 3.2mm thick 25mm dia inner pipe 2.6mm thick terminal flat of 30x10 / 12x12mm, the entire construction processed with hot tip galvanizing outer surfcae upto 100 microns all inner annular space filled with highly conductive and non - corrosive nature crystalline material along with electrode moisture booster compound of 1x25 kg bags will be supplied to fill surround the pipe at the time of installation. (Mositure retention, Conduction and non-corrosive nature) (Galaxy/Ashlok/equivalent) For Transformer Neutral earth. |
| 732 | Provision of Plate Earthing on with an earth electrode of 2.1mtr class ‘B” GI pipe of dia not less than 40mm with copper earth plate of size 2ft x 2 ft 3mm thickness with necessary funnelling arrangement with necessary masonry work with 38 mm RCC cover slab for brick masonry works. |
| 733 | Supply and run of25mm x 6mm tinned copper flat with necessary clamps/support on wall / floor/ground for earth connection. |
| 734 | supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. |
| 735 | Supply and run of 1 of No.8 SWG GI wire for earth connection. |
| 736 | Towards safety accessories, measuring instruments and tools in the permanent sub-station building First Aid Box-1set Fire Bucket with stand-2nos Rubber Mat 12mm X 1m X 2m – 6 Nos. Fire Extinguisher-DCP- 5 Kgs – 4 Nos. Hand Gloves-1pair First Aid Chart TAMIL & ENGLISH Earth Discharge Rod Danger Board Megger – 500V Digital Multi meter. |
| 737 | Preparation of Electrical schematic diagram, site plans, physical layout 5 copies and payment of CEIG fees, submission of completion report, rectification report, obtaining drawing approval, Permanent safety certification etc., complete including Schematic diagram lamination copy fixed at HT substation. |
| 738 | Renewal by Supply of 40Ft Ladder for high Ceiling for maintenance purpose. |
| 739 | Wireless Fire Alarm System Supply and Installation of 500 Devices Addressable Wireless Fire Alarm Panel with LCD display for type of alarm, zone and time of activation, large LCD display. History of upto 100 logs can be stored. Battery backup and inbuilt charger available for 12 V 7 AH batteries. All wireless zones should be able to arm/disarm from the panel. Normal open/close PFC output shall be available. Shall operate on 230 VAC single-phase supply. Make: - Karassn, Fyresys/ Equivalent |
| 740 | Supply and installation of Wireless addressable smoke detector photoelectric type with base and led to operate on 9V dc supply. Make: Karassn, Fyresys / Equivalent |
| 741 | Supply and installation of addressable electronic sounders 5 watts with inbuilt Transmitter, wall mounting type to operate on 230 V AC supply.Make: Karassn, Fyresys. / Equivalent |
| 742 | Supply and Installation of wireless manual call points press type, Make: Karassn, Fyresys / Equivalent |
| 743 | Supply and installation of wireless signal transmitter repeater wall mounted for wireless smoke detector and panel connectivity. |
| 744 | Supply and installation of CAT 6 cable with heavy 1 inch conduit and fittings. |
| 745 | Supply and Installation of ABC dry chemical powder type automatic modular ceiling mounted Fire extinguishers ISI marked with initial charge and automatic sprinkler to operate at 56 deg centigrade. 5 Kgs Capacity. |
| 746 | Supply & installation of ABC powder type wall mounted fire extinguishers with initial charge, discharge nozzle, squeeze grip lever, pressure gauge ISI marked and capacity 6 Kgs. |
| 747 | Supply & installation of CO2 type fire extinguishers with initial charge, discharge horn, on/off regulator, seamless MS cylindrical body iSI marked, capacity 4.5 Kgsm. |
| 748 | Public Address system Supply, Installation,Testing and commissioningof Compact Line array element having 2x 6.5 Inches LF ,2 x 1.4 Inches(2.5VC) HFdriverswithFrequency Response(+/-3 dB ):80Hz-18000 Hz,horizontal coverage angle of 110 degrees nominal and vertical coverage 12 degree ,Maximum Peak SPL 129 dB @ 1m Dual Input 8 Ohms +8 Ohms , Power capacity 950 Watts Programme Enclosure 15mm Phenolic birch plywood , captive compresive system rigging,583 mm (W)X244 mm (H) X481 mm (D), Constant curvature array Elements Textured paint,Seamless transistion waveguide (STW) Maintained down to 950 HZ for perfect Aucoustic between the enclosurefrom the array and shap to SPL. off axix rejection used to avoid reflection in the enclosure coupling plane and POWERLINK perfect adjust the acoustic coverage. Make: AXIOM / L - ACOUSTIC/Eq. (MR) |
| 749 | Supply, Installation,Testing and commissioning of Aluminium Coupling bar. Make: AXIOM / L - ACOUSTIC / Equivalent |
| 750 | Supply, Installation,Testing and commissioning of Vertical quick release pin. Make:AXIOM/ L - ACOUSTIC / Equivalent |
| 751 | Supply, Installation, Testing and commissioning of Horizontal Rigging fly bar Kit. Make:AIXOM/L- ACOUSTIC / Equivalent |
| 752 | Supply, Installation, Testing and commissioning of stage MonitorBlack Color flying, Line arrayble Full Size 12 Inches, Active coaxial 2 Way bi-ampable Element . The speaker cabinet must have frequency rangeof 70Hz-18kHz(+/ -3dB), sensitivity (1W/1m) 131 dB SPL @1m or more, power handling 1200 W class D Amplifier, Coverage angle 80 Degree Horizondal and 80 Degree vertical, Dimension 507mm(W) X 316mm(H) X 403mm (D), weight max 16Kgs, contain 2) XLR/TRS Combo 3.5mmInput,and (1) XLR link Output. 15mm Phenolic birch plywood, Black textured paint and POWERCON main 4 pole for signal and power, network connector.Make :AXIOM / L-ACOUSTIC / Equivalent |
| 753 | Supply, Installation, Testing and commissioning of Master Amplifier, Digital sound processor, In and Out Main sharebased digital signal processor, RTA, SPLM, PRONET remote control,power capacity of 2 x 2000 watts stereo amplifier rack., Class I, stereo power Amplifier with In built DSP, Class one Complete with FIR Filters, Audio Limiters, Output delay per channel, GEQ per channel, PEQ per channel, Load impedance and having PC remote control option. Make:AXIOM / L-ACOUSTIC / Equivalent |
| 754 | Supply, Installation, Testing and commissioning ofDigital signal processor, 2 In and 6 Out, 40 bit floating point resolution CORE DSP, 24 bit AD/DA converter, 110dB dynamic range, 5 bands of parametric equilizer on each in and out, 28 bands graphic equilizer, Limiter / compressor, upto 600ms delaytime on each input and output, Grouping function, SPL management and PRONET remote control thru USB and network capability. Make: AXIOM/ Equivalent |
| 755 | Supply, Installation,Testing and commissioning of 32 channel Digital Mixing console Up to 40 inputchannel XLR and 10 master output , Aux output, USB input, sonarlee Audio software for record and editwith 17 motor 100mm fader Digital audio,8 DCA and 6 mute group,32x32 Channel USB interface mixing console with LED Display independent 48 volt phantom power supply for microphone. Make : Allen Heath / Equivalent |
| 756 | Supply,Installation,Testing and commissioning of UHF Antenna with Power distribution system with provision for 4 nos UHF wireless Receiver and 4 Nos Power supply output,casecade method and loop. Make : EIKON / Equivalent |
| 757 | Supply, Installation, Testing and Commissioning ofDynamic Super-Cardioid professional Microphone Polar pattern Super-Cardioid Frequency response 50 – 19.000 hz Sensitivity -74 ±3dBv/µbar Dimensions 54,9 Ø x 182 mm Frequency response tailored for vocals, with brightened midrange and bass roll-off to control proximity effect Padded bag and microphone holder included MAKE : EIKON/ Equivalent |
| 758 | Supply, Installation, Testing and commissioning of Digital Wireless Dynamic Handheld microphone inbuilt transmitter, Transparent 24 bit digital audio, 120dB dynamic, 32 channelband, tansmitter and receiver over IR scan and sync, 44MHZ tuning band width compatible. Make : EIKON./ Equivalent |
| 759 | Supply,Installation,Testing and commissioning of Miniature condenser lapel microphone Belt - pack transmitter, Transparent 24 bit digital audio, 120dB dynamic, 32 channelband, tansmitter and receiver over IR scan and sync, 44MHZ tuning band width, Polar Pattern CardioidFrequency Response 20 - 20000 Hz Make : EIKON/ Equivalent |
| 760 | Supply, Installation, Testing and commissioning of Log Periodic Active directional Antenna, 450 - 900MHz with 10" coax cable and mounting. hardware. Make : EIKON/ Equivalent) |
| 761 | Supply, Installation, Testing and commissioning of Hydraulic Microphone floor Stand with base. |
| 762 | Supply, Installation, Testing and commissioning Professional stereo Headphone with volume control. Make : EIKON / Equivalent |
| 763 | Supply, Installation, Testing and commissioning Loudspeaker Cable : 2 Core 2.5 Sqmm PVC insulated OFC Copper conductor with PVC pipe and accessories. Make : PROEL / Equivalent |
| 764 | Supply, Installation, Testing and commissioning Micrphone Cable: 2 Core shield PVC insulated OFC Copper Conductor microphone cable with PVC pipe and accessories. Make : PROEL / Equivalent |
| 765 | Supply, Installation, Testing and commissioning Connector: UL Listed connector and patch cords. |
| 766 | Supply, Installation,Testing and commissioning of face plate cable cubby including 2xXLR faceplate-2 X Speakon Connect with face plate. Make : CUSTOM BUILT/ Equivalent |
| 767 | Supply, Installation,Testing and commissioning of 5 Mtrs Microphoe Extenson cable with both end connector. Make : PROEL/ Equivalent |
| 768 | Supply, Installation, Testing and commissioning of 10 Mtrs Microphoe Extenson cable with both end connector. Make : PROEL/ Equivalent |
| 769 | Supply, Installation,Testing and commissioning of 2 Mtrs Signal patch cable with both end connector Approved. Make : PROEL./ Equivalent |
| 770 | Supply, Installation, Testing and commissioning of 3 Pin XLR, cable / Panel type Connector with accessories. Approved Make : PROEL/ Equivalent |
| 771 | Supply, Installation, Testing and commissioning of 4 pole Speakon Connector, cable / panel type connector. Make : PROEL/ Equivalent |
| 772 | Supply, Installation, Testing and commissioning of 19 "" Rack Electric Distribution 2U Wired module in 6Nos 16A, 2 Pole+Grand socket with IP4. Make : PROEL/ Equivalent |
| 773 | Supply, Installation, Testing and commissioning of 12/18Inches heavy Duty spring with XLR Connectors. Make:SHURE / Equivalent |
| 774 | Supply and installation of 5”ICT Surface-Mount Loudspeaker for Installation Applications, 32W@ 16 Ohms, 70 V/100V: 32 W / 16 W / 8 W, IP65 rating bracket included (White). Make : Ahuja .Model :PS500T/ Equivalent |
| 775 | Supply and Installation of PA Mixing AmplifierWhich operates on AC & DC power, 7 – Mic & 2 – Aux inputs, Output 4 & 8 ohm, 70V & 100V, Frequency Response: 50-15000 Hz, Make : Ahuja , Model : SSA-250DP/ Equivalent) |
| 776 | Supply and installation of 6 channel audio mixing console. Make : soundcraft, Model: EPM 6/ Equivalent |
| 777 | Supply and Installation ofDynamic Hand held microphone. Frequency response: 50-16KHz, Connection : 3-pin XLR. Make: Shure, Model : Beta58A/ Equivalent |
| 778 | Supply and Installation of USP Recorder/ player Make: Ahuja, Model: ADP-30R/ Equivalent |
| 779 | Renewal by Supply & Laying of 2 Core Shielded Dual Track Professional Audio Cable. (Make : Kholight; Model : Dual Track)/ Equivalent |
| 780 | Renewal by Supply & Laying of 25mm PVC Conduits with required Accessories.(Make : Avonplast Orient / Equivalent) |
| 781 | Supply and laying of sheathedshielded mic cable. Make: Belton/ Equivalent |
| 782 | Towards Charges for Programming, Tunning, Alligment of the entire system/ Equivalent speaker, Amplifier,audio mixing console and XLR M/F connector etc. |
| 783 | VRF AC units Outdoor unit:Supply and installation of 30HP VRF outdoor units equipped with hightly efficient invertor scroll compressors, special acrylic precoated heat exchanger, low noise condensor fan, auto check function for connection error, auto address setting, with multiple outdoor units,including providinggas charging, pressure testing, leak testing, complete including cartage etc. as required. Refrigerant shall be R410A and all compressors shall be of inverter type only for better efficiency. The part load under normal operating conditions. |
| 784 | Design, supply, installation, commissioning and testing of 43±2 mm thick PUF insulated double skinned AHU of sectionalised sheet steel construction Air handling unit of minimum capacity as indicated and suitable for pumping air against a minimum static head as indicated and complete with fan section with DIDW backward curved centrifugal fan, coil section with cooling coil, suitable for pumping air against a minimum static head of 65 mm wg,30000 cfm, Maximum face velocity across the coil : 500 fpm, Minimum number of rows6 row,volume control damper provided in supply air outlet. |
| 785 | Outdoor unit:Supply and installation of 24HP VRF outdoor units equipped with hightly efficient invertor scroll compressors, special acrylic precoated heat exchanger, low noise condensor fan, auto check function for connection error, auto address setting, with multiple outdoor units,including providinggas charging, pressure testing, leak testing, complete including cartage etc. as required. Refrigerant shall be R410A and all compressors shall be of inverter type only for better efficiency. The part load under normal operating conditions. |
| 786 | Indoor unit:Supply and installation of 11TR Floor mounted Ductable type Indoor Unit, compact cooling coil,electronic expansion valve, Multi speed fan motors, dynamically balanced blowers, provision for Fresh Air Intake, syntheticwashable media filter including insulation andsuitable for operation on single phase 230volts AC supply & remote control operation. |
| 787 | Supply and Installation of 7/8 copper refrigerent piping with all fittings for suction and liquid line insulated with 19mm/13mm thick class "O" closed cell nitrile rubber insulation. |
| 788 | Supply and Installation of 5/8 copper refrigerent piping with all fittings for suction and liquid line insulated with 19mm/13mm thick class "O" closed cell nitrile rubber insulation. |
| 789 | Supply and laying of 4C X 1.5sq.mm flexible cable with earthing from ODU to IDU, with fittings, gland, lugs, clamp, etc., |
| 790 | Supply and Installation of 120GSM GI Fabrication Ducting, supports, like anchor fastner, angel, Therede rod, Bolt and nuts, etc for the following guages. |
| 791 | 24G |
| 792 | 22G |
| 793 | 20G |
| 794 | Supply and Installation of 9 mm thick thermal insulation with Al.foil, adhesive, etc., for duct. |
| 795 | Supply and Installation of 12 mm thick Accosticinsulation with Al.foil, adhesive, etc., for duct. |
| 796 | Supply and Installation of Extruded Aluminium powder coated Supply Air Grills / Diffusers with VCD. |
| 797 | Supply and Installation of Extruded Aluminium powder coated Return Air Grills / Diffuserswithout VCD. |
| 798 | Supply and Installation of GI Fusible link Fire damper for both Supply Air Duct. |
| 799 | Supply and Installation of GI Volume Control damper for Both Supply Air Damper. |
| 800 | Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable clamp and insulation as required. |
| 801 | Supply and Instllation of Fire Retardant Canvas connection for AHU to Duct, etc., |
| 802 | Supply, Fabrication and installation of MS channel for ODU Unit mounting. |
| 803 | Supply and Charging of R407C Refrigerant Gas for the required system. |
| 804 | Supply and Erection of Return Air Boxing for the supply duct to the Return Air Collection. |
| 805 | Supply and Fixing of Sound Attenuator in Supply air duct to control the noise level for the AC system. |
| 806 | Supply and Fixing of Wall Acoustic for AHU Room / Boxing. |
| 807 | Supply and Fixing of the AHU Kit for the AHU Unit. |
| 808 | Supports for hanging Supports forthe 11tr indoor unit . |
| 809 | Supply and Fixing of Refnut and Remote for the unit control. |
| 810 | Supply and Installation of cable tray for copper pipe with cables. |
| 811 | Supply and Fixing of Starter panel for AHU. |
| 812 | Supply and Fixing the rating of 4 Pole 63A MCB for VRF ODU and Ductable unit. |
| 813 | Supply and Fixing of AHU PCB. |
| 814 | Supply and fixing of ODU Joint. |
| 815 | Split type AC units Supply and installation of 2TR capacity 3star rated energy efficient high wall mounting split type Air conditioner unit consisting of outdoor copper condensing unit complete with hermetically sealed compressor with R-22 refrigerant air cooled condenser, fan etc and 1No indoor Hi - wall, wall mounted below capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc with 3 meter copper refrigerant piping and chord wire connecting Indoor and Outdoor unit with drain pipe suitable for operation on 230V + 10%, 50Hz, single phase A/C supply. (Make Carrier / Blue star / Voltas / Equivalent). |
| 816 | Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay (V-Gurad / Equivalent). |
| 817 | Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3metres supplied with AC unit) |
| 818 | Supply and fixing of MS stand for fixing outdoor unit . |
| 819 | Supply and fixing of water drain pipe line (1”PVC Pipe). |
| 820 | GENERATOR Supply, Testing, Commissioning and Handing over of 1No 250 KVA Diesel Generator set of 0.8 P.F. Three Phase 415/420 Volts, 50 C/S, 1500 RPM CPCB Approved capacity compressing of Engine BHP/ suitable BHP of water cooled clock wise rotating feed pump with 110KW/250KVA operating capacity brush less alternator close coupled underneath fuel tank standard, safeties, LLOP with stop solenoid, battery with lead, Electric start and vibration fitting & accessories and AMF control panel as detailed below including transporting of unloading changes.(A). ENGINE : Water cooled diesel engine suitable for Generator application with a shaft output suitable at 1500 RPM under NTP conditions. The Engine shall comprise the following standard fitting flexible coupling, fly wheel air cleaner ,fan blower, radiator, water pump, fuel pump, fuel filter lubricating oil filter etc., (B) Complete with starter motor, dynamo, standard batteries with cable, flexible exhaust piping of 50 cms length (C) ENGINE INSTRUMENT PANEL / MOUNTED: Starting push button/ staring key, lubricating oil temperature gauge, lubricating oil pressure gauge, water temperature gauge, safety |
| 821 | control for low lubricating oil pressure, safety control for high water temperature, safety control for over speed, hour meter (mechanical) and RPM indicator, battery charging ammeter. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous at full load. (D). Alternator: 250 KVA/110 KV capacity ofbrush less alternator AC, Three phase 50 c/s, 415/420V,0.8PF, 1500 RPM under NTP conditions conforming to IS 13364 (Part – II) 1992 to be means of coupling STANDARD MANUAL CONTROL PANEL (MCP): Integral type totally enclosed sheet metal cubical type Control Panel suitable for the above D G Set with the fallowing components. VAF Digital Meter ( Volts, Amps and Hertz with selecting options ), 3 no.s of CT’s of suitable rating, Indicating Lamps for ‘Load On’, ‘Set Running’, MCB up to 45 KVA (MCCB for rating above 63 KVA), KW cum KWH Digital Meter for 250 and above KVA DG Sets). The control panel will be complete with internal control wiring cables, Power cabling from alternator to control panel but without connecting cables form Panel to your load. AMF Panel supply is optional in-lieu of MCP. (E). FUEL TANK : |
| 822 | Fuel tank of 400 liters capacity and with inlet and outlet connections level indicator with scale etc., (F).BASE FRAME : The Base frame should be fabricated MS channel frame of rigidly welded construction for mounting of generator set. The engine and alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame with proper alignment. The supply of Generator set includes loading. |
| 823 | ACOUSTIC ENCLOSURE: The Acoustic enclosure be free standing floor mounting type with modular construction with the provision to assemble and dismantle easily and designed to suit all weather conditions. Erection of Acoustic enclosure suitable for 250 KVA Diesel generator complete with all accessories as above with required concreting and suitable supports etc., (i) Supply of manualsfor operation & maintenance of DG set with warranty card etc.,AMF PANEL:Supply, Testing, Commissioning ofAMF Control Panel. The AMF control panel (Cubicle)should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with |
| 824 | enamel painted and incorporating the following with suitable provision for connecting incoming and outgoing leads having been made on the control panel. (1) AC Ammeter and Selector switch (2) Voltmeter and Selector switch (3) 3Nos Current transformers with suitable ratio (4)Frequency meter (5) KWH meter (6) 1No Power factor Meter (7) Battery charging set comprising of the following for charging the battery from mains. a. Transformer/Rectifier b. DC Ammeter c. DC Voltmeter d.ON/OFF Switch e. Charging rate selector switch f. Push button start g. Push button stop h. Push button reset (8) 1 SetAir break contactor with auxiliary neutral contactor for main supply (9) 1 Set Low voltage HRC fuse for the short circuit protection of the main supply. (10) 1 Set Alternator contactor with auxiliary neutral contactor (11) 1 Set three pole bimetal release for over load protection of alternator. (12) 1 Set low voltage HRC fuse for the short circuit protection of the alternator. (13) 1 Set DC Control relays incorporating engine start stop and failure to start/lockout. (14) 1 Set Selector switch auto /manual (15) 1No Push button “Start’ (16) 1No Push button “Stop’ (17) 1No Push button “Reset’ |
| 825 | (18) 1No Signal lamp for indicating ‘Set running’ (19) 1No Signal lamp for indicating ‘Batterycharger ON’ (20) 1SetPilot lamps of 3Nos (21) MCCB of 400A capacity with magnetic thermal over lead release, instant start circuit trip and under voltage release switch. (22)Rectangular copper bus bars (1No for each phase, neutral and earthing terminal) of adequate capacity duty colour coded with head shrinkable PVC sleeves. (23) 1No Mains Voltage monitor. (24) Hooter/Audio Alarm for indicating set fails to start and forDG O/L. (25) 1 Set Timers. (26) Audio and visual indication arrangementsa. Low lubricating Oil pressure b. High water temperature c. Over speed. (27) 1No Earth fault relay (28) Isolator to Isolate the neutral. 2 .The engine should trip for the following a. Low lubricating Oil pressureb. High water temperature c. Over speed. |
| 826 | Supply and Installation of Exhaust Piping of Sufficient length with suitable MS pipes so as to extend outside the generator room with necessary thermal insulations. |
| 827 | Supply of lubricating oil and first filling with charging of starting battery and supply of 380 liters diesel for 250KVA to run the geneset for minimum of 8 hours. |
| 828 | Providing suitable PCC concrete foundation depth not below 400mm with cement concrete 1: 2: 4 with sand cushion all around the foundation erection of 250 KVA Generator set not less than 2 Feet height over the existing foundation to suit 250 KVA Gen set. |
| 829 | Supply and Installation of 5MP IP outdoor bulletCamera ,WDR 3.6 mm Fixed lens , OE, Starlight, 0.002Lux, 5MP 2560*1920)@20fps, 4MP(2560×1440) @25fps, 50m IR,IP67,4mm lens, Built In Mic, Micro SD Card Slot (512GB Capacity), VCA : Tripwire and Perimeter and Starligh Make: NEOS/NT-IBS15 / Equivalent |
| 830 | Supply and Installation ofIP PTZ Camera with 1080P,WDR 25XZOOM, IRH. 265/H.264 PoE standard, PoE+, 1/2.8" CMOS Sensor, 1080P@30fps, 150m IR, Speed 0.05°~400°/s,TVS 6000V protection, IP66 waterproof Low Illumination:0.002Lux Starlight, Audio In/ Out, Alerts, Built in Heater Make:NEOS/NT-IPS12/ Equivalent |
| 831 | Supply and installation of 40 channel Network Video recorder , 40ch IP Camera Input, resolution up to 12MP, 16ch Sync playback; Bandwidth : 400Mbps, Support Camera Smart VCA, Dual RJ45 port, 4SATA (up to 10TB), 1 HDMI&VGA, 2USB, RAID Make : NEOS/NT-IN20440 / Equivalent |
| 832 | Supply and Installation of 24-port poE2 Gigabit managed switch which supports 2 fiber optical output. Make: D-link/ Equivalent |
| 833 | Supply and Installationof 6U wall rack, with front glass door with lock and key facilities. Make: D –link/ Equivalent |
| 834 | Supply and Installation of8TB built inHard Disc Drive.Make:WD/ Equivalent |
| 835 | Supply and laying of CAT6 cable in existing 1” PVC pipe. Make:D-link/ Equivalent |
| 836 | Renewal by Supply and laying of 25mm dia PVC rigid pipe with PVC accessories on wall / ceiling / floor. |
| 837 | Supply of 55inches LED TV with following features : 1. USB Input 2.HDMI Port 3.Clear audio + 4.Motion flow XR 200 5.Full HD 1080. Make : SONY / X75K / Equivalent |
| 838 | Supply and Installation of0.6 KVA UPS with suitable 12V,7.2Ah, batteries. Make : APC / Equivalent |
| 839 | Supply and laying of 6 core outdoor OFC Cable. |
| 840 | Supply and erection of 4”inch dia and 6-meter height Heavy duty GI post with 6 feet depth concrete work with 16 mm J-Bolt fixing and Necessary masonry work. |
| 841 | Supply and laying of 50mm Dia HDPE black hose pipein ground at a depth of 0.75 meter and refilling the earth to make good. |
| 842 | Supply and Installation ofwall mount bracket for PTZcamera. |
| 843 | Supply and Installation of3 Mtr SC/LC fiber patch Cord. |
| 844 | Supply and Laying of 20Mtrs HDMI cable with HDMI connectors with PVC pipe and accessories. Make : MX / Equivalent |
| 845 | Supply and Installation of 10/100/1000 media converter for connecting OFC and cat6 cable. |
| 846 | Supply and installation of HDMI To optical convertor Extender. Make:Mailstone. |
| 847 | Supply and Installation of 2 KVA Online UPS, 2KVA/1200W, inbuilt Batteriers Efficiency at Full Load: 92.0 % ; Transfer Time: 8ms typical : 12ms maximum; Cord. Make: APC / SRC2000XLI-CC. |
| 848 | Testing, Programming and commissioning of software for the Cameras, Alignment of Cameras, Naming of Cameras, Setting of NVR, TV Monitor with HDMI cable , Video cable, BNC Connectors and Power adopter for Cameras RF Modulators, I/Os etc. |
| 849 | LIFT Supply, Erection, Testing, Commissioning and Handing over of 1No 13 Persons Passenger Lift as per following technical specifications including all taxes and duties Technical Specifications: 1. Location: Valluvar Kottam, Chennai, 2. No of Lift: One No. 3. Type of Lift: Gearless without Machine Room. 4. Capacity of Lift : 13 Persons (884Kgs) 5. Speed: 1.25 mps, 6. Type of Drive: Microprocessor based specific variable voltage variable frequency V3F Drive. 7. No of floor: Ground + 2 floor. 8. Total Travel:8 mtrs approximate 9. Leveling Accuracy: High level accuracy with smooth & Jerk free stopping. 10. Construction of car: Special car made of Stainless Steel hairlinefinish with rear side Glass panel. |
| 850 | 11. Position of Machine: Directly above the lift well shaft gearless. 12. No. of Landing Entrance:One in front - 3 Nos only. 13. No. of Car Entrance: One in front only. 14. Car Entrance Door: Centre opening automatic power door with stainless steel with Glass door. 15. Landing Entrance Door: Centre opening automatic power door with stainless steel with Glass door. Door with provision for emergency key opening at all landing. 16. Car size : 1500mm wide x 1400mm deep, 17. Car clear Height : 2200mm, 18. Car Door Type center / side : power operated centre opening sliding door, No. of. Door Panels : 2 Panel, Type of Door Drive : Linear Door Drive system, 19. Car Door (W x H) : 900 x 2000mm, 20.Shaft Type : RCCRB - Reinforced cement concrete with Red brick, 21. Shaft width & Depth : 2500mm x 1900mm, Overhead : 4500mm, 22. Pit Depth : 1600mm with Pit ladder. |
| 851 | 23. Car ceiling : Sleek small circular - JLFC 03 with LED lights and circular fans. 24. Car operating panle : JLCP 01 stainless steel - Hair line finish 1s4 - Bas 128 (Round) orange square dot - Matrix scrolling display vertical, 25. Power supply : 415V,400/440v, 3 phase, 50 cy / Sec A.C supply for power and230V, 50 Hz single phase AC supply for light. 26. Control: Microprocessor Computer based - simplex collective full collective logic systemwith or without attendant mode. 27. Lift Well : RCC construction with Brick masonry existing. 28. Induction : Up / Down Digital Direction scroll type and position indicator for all landing and in car. 29. Emergency Alarm Bell : Battery Operated Alarm Bell to be provided with automatic charging device. 30. Emergency Light : Battery operated Light to be provided with automatic charging device, Fireman"s switch : To be provided at ground floor. 31. Minor Builders Work: To be provided by lift contractor. |
| 852 | 32. Scaffolding: To be provided by lift Contractor. 33.Stainless Steel still angles and facia Plates: To be provided by lift contractor. 34. Steel for lift Machinery: To be Provided by lift contractor. 35. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by lift contractor during the guarntee period of one year. 36. Provision of intercom with phone to be provided inside the Lift by the lift contractor. 37.Lift License: Preparation of drawing , payment of charges to CEIGand insurance policy if any and obtaining CEIG safety certificate and lift license as per lift act should be done by the lift contractor. 38. Automatic rescue device: To facilitate the landing of the nearest floor at the time ofpower failure. This shall consist of suitable type battery system with charger inverter under voltage protection system etc.(Johnson / Kone). |
| 853 | SWIRLING BIRDS Supply, Installation, Testing and Commissioning of Swirling Birds made up of stainless steel 304 grade with necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D 2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete as per standard specifications. |
| 854 | RUNNING JETS Supply, Installation, Testing and Commissioning of Running Jets consists of 12 feet dia circular spray ring made up of 1½” stainless steel 304 grade pipe with required angle adjustable smooth stream ring nozzles 18 Nos. made up of brass with nickel plating, necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D 2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete as per standard specifications. |
| 855 | FINGER JETS Supply, Installation, Testing and Commissioning of Finger Jets made up of stainless steel 304 grade pipes with required angle adjustable smooth stream nozzles made up of brass with nickel plating, necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete. |
| 856 | HIGH VERTICAL JETS Supply, Installation, Testing and Commissioning of High Vertical Centre Jet made up of brass with nickel plating including necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D 2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete as per standard specifications. |
| 857 | DANCING DOMES Supply, Installation, Testing and Commissioning of Circular Ring Dancing Domes consists of 3 feet dia Circular Spray Ring made up of 1½” stainless steel 304 grade pipes with required angle adjustable smooth stream ring nozzles made up of brass with nickel plating, necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D 2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete as per standard specifications. |
| 858 | REVOLVING JETS Supply, Installation, Testing and Commissioning of Revolving Jets made up of stainless steel 304 grade with necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D 2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete as per standard specifications. |
| 859 | VERTICAL JETS Supply, Installation, Testing and Commissioning of Vertical Jets made up of brass with nickel plating, necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D 2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete as per standard specifications. |
| 860 | SNAKE JETS Supply, Installation, Testing and Commissioning of Snake Jets made up of stainless steel 304 grade pipe with required angle adjustable smooth stream nozzles made up of brass with nickel plating, necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D 2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete as per standard specifications. |
| 861 | ASCENDING JETS Supply, Installation, Testing and Commissioning of Ascending Jets made up of stainless steel 304 grade pipes with necessary angle adjustable smooth stream nozzles with nickel plating, necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete. |
| 862 | MIST FOUNTAINS Supply, Installation, Testing and Commissioning of Misting Unit for fog effects with necessary mist nozzles including necessary Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D 2467 SCH 80 UPVC fittings & control valves mounted on Stainless steel 304 grade fabricated framework with stainless steel bolts and nuts including cost and conveyance of all materials etc., complete as per standard specifications. |
| 863 | CYLINDER Supply, Installation, Testing and Commissioning of 6” dia Cylinder made up of Stainless steel 304 grade pipes with necessary stainless steel barrel nipples welded and necessary support legs to fix the cylinder on the floor etc complete as per standard specifications. |
| 864 | SOLENOID VALVES Supply, Installation, Testing and Commissioning of Solenoid Valves (Pressure – 0.5- 12 bar, Body Material – Aluminium, ASTM A351 Grade CF8 / CF8M – 240 volts – Diaphragm - Nitrite, Epoxy Moulded Square Coil, Metallic Round Enclosure, IP-67 Flame Proof Enclosure, IP-68 Weather Proof Enclosure) etc, complete as per standard specifications. |
| 865 | PANEL BOARD Supply, Installation, Testing and Commissioning of Programmable Dancing Fountain Pannel Board: 1) Made of 2 mm thick sheet steel enclosure, foot mounted cubicle type, epoxy powder coated (Siemens grey). Front doors are hinge able & lockable with the body. 2) Degree of protection – IP 54. 3) All cable entry from bottom. 4) All doors and gland plates have spongy rubber gasket. 5)Music Synchronization & Programming Console -1 No. with following a) Code Base Technology b) Filter Base Technology (auto sensing) c) Synchronized with MusicTechnology. d) Power by Online support e) 3 nos of VDF should be controlled digitally using Modbus (not analog signal) 6) Controller & Driverfor LED Lights. |
| 866 | PUMP Supply, Installation, Testing and Commissioning of 7.5 H.P Openwell water cooled Submersible Pump (Three Phase – 440 volts – 2880 RPM - Texmo / C.R.I / Kirloskar make) with required Supreme make ASTM D1785 SCH 40 UPVC pipes, ASTM D2467 SCH 80 UPVC fittings & control valves including cost and conveyance of all materials etc. complete as per standard specifications. |
| 867 | MULTICOLOUR LED LIGHTS Supply, Installation, Testing and Commissioning of Multi Colour 18 Watts Water Proof LED RGB lights made out of die cast stainless steel suitable 304 Grade suitable to be fitted with emitter type power LEDs with all in one optical lens of 85% efficiency step tempered glass 8 mm with protection class of IP-68 I/C connection & water proof jointing etc as required (6x3 watt) sealed with heat resistant, toughened glass provided with mounting cradle, necessary 1.0 Sq.mm 4 core Havels / Polygon / Finolex make electric cables for lights including cost and conveyance of all materials etc. complete as per standard specifications. |
| 868 | Supply, Installation, Testing and Commissioning of Main LCR Speaker:- Two Way Coaxialweatherised Line Array speaker designed to meet IP56 standards with 1 x 15" LF Driver (3" VC) , 1.4" Exit HF Driver (3"VC),Power Handling min. 1000W. Dispersion - Array defined. Sensitivity 103db, Max SPL 136db, Fully Weatherised Outdoor UV resistant cabinet withaluminium/ Stainless steel grille and OEM Array frames. VAL Audio, Martin Audio, D&B Audiotechnique |
| 869 | Supply, Installation, Testing and Commissioning of Subwoofer:- Dual 18" Subwoofer with min 2800W RMS, Frequency response : 30Hz - 800KHz, Sensitvity : 100dB , Max SPL : 141dB peak complete with weather resistance enclosre with Aluminium / Stainless steel grill.VAL Audio, Martin Audio, D&B Audiotechnique |
| 870 | Supply, Installation, Testing and Commissioning of Surround Speaker:- Two Way Coaxialweatherised speaker, 1 x 8" LF Driver (2" VC) , 1" Exit HF Driver (1.4" VC),Power Handling min. 400W , Dispersion - min. 80x80 deg, Sensitivity 96db, Max SPL 125db, built-in 70/100V Transformer taps, Fully Weatherised UV resistant Outdoor cabinet with aluminium/ Stainless steel grille Complete with OEM mounting bracket. VAL Audio, Martin Audio, D&B Audiotechnique |
| 871 | Supply, Installation, Testing and Commissioning of Amplifier:- Professional Dual channel Power amplifier, Class H topology with toroidal transformer, Power 2x 750W @ 8 ohms, 2 x 1100W @ 4 ohms, Frequency Responce - 20- 20000Hz,Sensitivity - 0.775Vrms Input Impedence - 20K, Crosstalk - >65dB, S/ N ratio - > 108dB, Damping Factor - 500, THD - < 0.3% .VAL Audio, Martin Audio, D&B Audiotechnique |
| 872 | Supply, Installation, Testing and Commissioning of Amplifier:- Professional Dual channel Power amplifier, Class H topology with toroidal transformer, Power 2x 1200W @ 8 ohms, 2 x 2000W @ 4 ohms, Frequency Responce - 20- 20000Hz,Sensitivity - 0.775Vrms Input Impedence - 20K, Crosstalk - >65dB, S/ N ratio - > 110dB, Damping Factor - 500, THD - < 0.3%.VAL Audio, Martin Audio, D&B Audiotechnique |
| 873 | Supply, Installation, Testing and Commissioning of Amplifier:- Professional Dual channel Power amplifier, Class H topology with toroidal transformer, Power 2x 400W @ 8 ohms, 2 x 600W @ 4 ohms, Frequency Responce - 20- 20000Hz,Sensitivity - 0.775Vrms Input Impedence - 20K, Crosstalk - >65dB, S/ N ratio - > 110dB, Damping Factor - 500, THD - < 0.3% . VAL Audio, Martin Audio, D&B Audiotechnique |
| 874 | Supply, Installation, Testing and Commissioning of DIGITAL CONTROLLER:-4 In x 8 Out Networkable Loudspeaker Management System ,High precision 32-bit floating point Top of the line SHARC DSP (96kHz sampling rate), Each output: Routing, Delay, Gain, HPF and LPF filters (up to 48dB/oct), 16 filters (PEQ, Notch and Shelving), 2 Dynmic EQ per chanel and 1024 tap FIR filters, Peak Stop and TureRMS Compressor / Limiter (Threshold, Attack, Release, Ratio).Celto Acoustique; Bi Amp, BSS |
| 875 | SHOW CONTROL SOFTWARE Supply, Installation, Testing and Commissioning of Show Control software complete with necessary software and hardware interface including lifetime license and accessories. Dataton/ 7th Sense/ Vioso / Equivalent. |
| 876 | CUSTOM COMPUTER Supply, Installation, Testing and Commissioning of Production PC with Intel i74.80 GHz Processor with 32GB RAM DDR4 3200mHz, with minimum2TB M2 SSD Drive, 16GB Graphic card process. The PC should have aFlat Panel LED Monitor with HDMI or equivalent display port with keyboardmouse.Dell/ Asus/ HP /Equivalent |
| 877 | SERVER Supply, Installation, Testing and Commissioning of Media Server with associated software license and hardware media. The control server should have 4 DP 1.4v outputs with each channel supporting 4k . The hardware should have 8GB RAM System memory, min. 1TB High Performance SSD Drive Storage. The hardware should have dedicated 6GB GPU and 1GBP/S ethernet port with 2 USB3 ports,3.5 mm stereo output jack and should support genlock, geometry correction, edge blending, color correction and 2D/3D mapping.The OS for the server should be Windows 10 enterprise embedded with quick OS recovery built-in, should follow BIS Certification. The Show control software and hardware should be from the same OEM.Dataton/ 7th Sense/ Vioso / Equivalent. |
| 878 | Light & Sound Content Design - 10 mins Supply, Installation, Testing and Commissioning of Content Development (1 Nos video content approx 10 min each and 2 pieces copyright free music approx 4 min each) (Excluding 3D Graphics). |
| 879 | Supply, Installation, Testing and Commissioning ofDLP Laser Light Source 23000 ISO higher brightness Projector ,IP60 rated, WUXGA(1920 x 1200) Display resolutions, colour boost, sealed optics, multi axis orientation, red laser technology, Contrast Ratio: 10,000:1 (Dynamic Contrast), Aspect Ratio:16x10, 24/7 operation, Filterless operation with liquid cooled technology, Typical illumination Life: 20,000 hours or better. Inputs: 1 x Display port, , 2 x HDMI , 1 x HDBaseT, 3G-SDI in/out Controls: 3D sync in/out, RS232,Control: Crestron RoomView, along with Suitable Lens as per site.Digital Projection/NEC/ Panasonic/ Equivalent |
| 880 | Supply, Installation, Testing and Commissioning of Smart light weight outdoor projector enclosure suitable for Marine environment made of Aluminum with Aluminum wielding. Complete with: 1. Build to meet min. IP64 weatherization standards. 2. Anti-reflecting tempered glass window with 94% transparency provided for an uninterrupted projection. 3. Hydrophobic filter for salt fog filtering. 4. Powerful AC fan for efficient cooling with positive pressure for ultimate projector protection. 5. Fan circulation to automatically start even during day time if inside temperature goes above 35 deg Cel. 6. Sensor based Humidity and temperature control automation to provides complete climate control inside the enclosure automatically. 7. Enclorure unit to be Insulated with non sfibrous, non toxic Cross linked polyethylene sheets with min. 19mm thickness 7. Complete unit to be powder coated and insulated for heat protection. 8. Power distribution sockets 16/6 Amps and industrial plug 32A. (MR) DMI/ Tarm/ASL/ custome built/ Equivalent |
| 881 | Supply, Installation, Testing and Commissioning of Animation Laser : Source - Laser Diode : 5w RGB/RGBY, Power Consumption = 800w, Scanner - 40kpps, Scan Angle - ±30°, Linearity Distotion <2%, Beam Diameter And Divergence : 9x6.5mm, 1.2mrad, Control modes - Integrated Hardware to Support Animation Software Over ILDA or CAT6, Ingress Protection - IP65.Lpro / Equivalent |
| 882 | Supply, Installation, Testing and Commissioning of 350W Outdoor IP67 beam moving head light. Voltage: wide voltage 110V-240V 50-60HzLight source: Customized 350W Osram Japan Phoenix bulb Total power: 380W original Osram 371 light source,Color: color plate: 13+1+colorful rainbow effect+atomization function. Gobo: gobo wheel: 13 fixed gobos + 1 white light. Focus: Electronic linear high-definition dynamic focus, using high-density glass optical lens. Linear dimming curve: 0%-100% linear dimming. Beam Angle: 2°. Channels: 16/20 international standard DMX512 channels. Lens diameter: 150mm, XY motor: three electric drives, powerful, faster, more stable and quieter. Appearance: High temperature resistant die-casting aluminum shell, light in size, adopts wind direction drainage and intelligent temperature monitoring technology, fast heat dissipation. Control mode: DMX 512, self-propelled, master-slave self-propelled. Prism: 48 prisms (24+16+8) superimposed and rotatable, macro function. Display: LCD display adapts to different installation positions. Horizontal/Vertical: 350/380 waterproof lamps can scan 540° horizontally or 270° vertically, fast and stable, cooling system: Use CFD software to analyze and calculate the heat flow of lamps, and design a low-noise heat dissipation system. The fan drive has excellent performance and extremely low noise. Light body size: 37*30*68cm Net weight: 23KG, Package size: 55*44*68cm Gross weight: 27KG, One flight case: 42*37*91cm Weight: 37KG, One flight case with two: 92*41*91cm Weight: 70kg. |
| 883 | Supply, Installation, Testing and Commissioning of Equipment Rack - 19 " standard Rack with all required accessories. Earthing community kit, mounting bracket, cable manager, support angle, equipment shelf, mounting hardware, fan housing units etc, Ventilated top and bottom covers with attractive styling. It has Removable side panels with slam latches for easy access. Netrack/ APW/ MTS/ Maxcom/ Equivalent |
| 884 | Supply, Installation, Testing and Commissioning of Show Control software complete with necessary software and hardware interface including lifetime license and accessories with remote access control subscription SaaS module.Dataton / 7th Sense/ Vioso/ Equivalent |
| 885 | Supply, Installation, Testing and Commissioning of Video Transmitter and Receiver Set Max Data Rate 10.2 Gbps, Resolution Range Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, Low power comsumption, compliances CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES.Kramer/ Extron/ Lightware / Equivalent |
| 886 | Supply, Installation, Testing and Commissioning of Small Business24 port Gigabit switch and 2 x Mini GBIC fiber uplinks.Standards:-IEEE 802.3, 802.3u, 802.3x, 802.3ab. Cabling Type:-Category 5 and multi-mode fiber. Power:-100-127VAC/200-240VAC, 1.0A/0.5A, 50-60 Hz. Operating Temperature:-32 to 104ºF (0 to 40ºC). D"Link/ Cisco/ Netgear / Equivalent |
| 887 | Supply, Installation, Testing and Commissioning OF COMPACT COMMAND WING FOR CONTROLLING THE LIGHTS AS THE PROGRAMMER AND DESIGNER INTEND : PLAY BACK FADERS -10 Playbacks, ENCODERS -8 Attribute Encoders, OUTPUT - 2 Direct DMX Outputs supporting RDM,, PLAYBACKS BACKLIGHT - Illuminated Playbacks, SOFTWARE COMPATIBILITY - Connects to Free MagicQ Software / ANY OPEN SOURCE LIGHT CONTROLLING, SOFTWARE VIA PC, Mac or Linux, COMPATIBILTY -64 Universes via Artnet/sACN, AUDIO INPUT - Audio Input VIA INTERFACE, PRESET SCENES - 10 Scene Input. |
| 888 | Supply, Installation, Testing and Commissioning of Creation of 10 miutes immersive projection content for Chariot Stone Car projection area: concept design, story board, narration, Tamil Hisptorian Curator,Development of 3d model, characters, patterns designs, rigiging, rendering, processing, Studio works - VO artists, Audio & music composition, DoP, DoS, Full HD output. Pre-production: Research: Detailed study and understanding of the life and accomplishments of Thiruvalluvar to accurately represent them in the multimedia content. Creative Scripting: Creating a captivating narrative that intertwines the elements of the Thiruvalluvar"s works. Screenplay: Writing a dynamic script that will be used as a blueprint for the projection movie, including scene descriptions, character actions, and dialogue. Direction: Planning and overseeing the entire production process to ensure the final product aligns with the envisioned concept. |
| 889 | Production: Drone mapping of the stone chariot for precision of contours and textures VO recording HQ modelling and texturing of desired content as per the approved scripts HQ theme model creation for projcetion on the structure HQ modelling and texturing of desired content as per the approved scripts Integration Animations & transition themes Cloth, particle effect, pixies Creation of cotent for Thiruvalluvar Silhoutte, gold effect Advance photo real lighitng and rendering |
| 890 | Post Production: Editing: Refining the content for clarity, pacing, and visual appeal along with Post-Vfx, advanced transitions, compositing and title effects. Stereo-3D Depth grading: Fine-tuning and adjusting the depth perception in the 3D content for an immersive visual projection experience. Optimising the Depth-Scripts & Depth-Budgets allocations while considering various Psychological/Physiological Human-Factors. Colour grading: Enhancing and adjusting the colours of the content to achieve a desired visual aesthetic and mood. Sound Design: Creating and incorporating sound effects, music, and dialogues to enhance the audience experience. Quality Assurance: Thoroughly checking and validating the multimedia content to ensure it meets the set quality standards. Rendering final HQ HD output to blend with the projection surface |
| 891 | Supply, Installation, Testing and Commissioning of of Development of projection 3D mapping area, edge blending, axis and tilt corrections, warping simulation, Mesh grid creation, content warping, contour detailing, light spread simulations, 3D mapping software licenses, 3d Content Designing Software licenses3d Mapping Artist as required. |
| 892 | Supply, Installation, Testing and Commissioning of 1 mtr Media Facade Linear Fixture with following Specs : Max Power - 12W per meter, Input Voltage - 24VDC, Fixture Length - 1000mm, LED Source - SMD3535 (Or Better) RGB/RGBW, Led Qty - 60Unit per Meter, Optics - 120° (Clear Lens), Control Protocol - DMX512, Pixel Options - 1/5/10/20 pixe per Meter, Addressing options - Auto Addressing, Housing Material - Die-cast Aluminium, Mount type - Surface mount, Housing Colour - Black / WHite / Silver, Operating Temperature - -30° - 60°, Ingress Protection level - IP66, Indeginious Approvals - BIS (The package of this Line Item must Include all the necessary cable , t-cables, connectors and power supply i.e. 1set for each 8unit of Media Facade linear fixture).MQ / BV / LBT / Equivalent / Indegeneous BIS (Charriot Lower 100 nos, Upper 300 nos) |
| 893 | Supply, Installation, Testing and Commissioning of 0.5 mtr Media Facade Linear Fixture with following Specs : Max Power - 12W per meter, Input Voltage - 24VDC, Fixture Length - 500mm, LED Source - SMD3535 (Or Better) RGB/RGBW, Led Qty - 60Unit per Meter, Optics - 120° (Clear Lens), Control Protocol - DMX512, Pixel Options - 1/5/10/20 pixel per Meter, Addressing options - Auto Addressing, Housing Material - Die-cast Aluminium, Mount type - Surface mount, Housing Colour - Black / WHite / Silver, Operating Temperature - -30° - 60°, Ingress Protection level - IP66, Indeginious Approvals - BIS (The package of this Line Item must Include all the necessary cable , t-cables, connectors and power supply i.e. 1set for each 8unit of Media Facade linear fixture).MQ / BV / LBT / Equivalent / Indegeneous BIS (Charriot Lower section) |
| 894 | Supply, Installation, Testing and Commissioning oF LED WASH WITH THE FOLLOWING MINIMUM SPECS:Max.power - 100W, Input voltage - AC100-277V, LED Qty - 6pcs 4 in 1 RGBA (with minimum 50,000+ burning hours at L80), CCT - 1800K to 8000K, Preset colours - 24 colours , Colour, CRI>90, Optics - 6°,10°,15°,20°,30°,36°, Lumen output > 3349lm, Peak Intensity > 134412cd @ 6°, Dimming rate - 16 bit dimming, Cooling system - Forced Convection, Control protocol - DMX/DMX512/RDM, Operating Temperature - -20?-45?, Ingress protection - IP67, Corrosive protection - C5-M,Mechanical Impact Protection - IK10, Housing - Die-cast aluminium or better, Indiginious approvals - BIS. |
| 895 | Supply, Installation, Testing and Commissioning OF LED WASH WITH THE FOLLOWING MINIMUM SPECS:Max.power - 180W, Input voltage - AC100-277V, LED Qty - 9pcs 4 in 1 RGBA (with minimum 50,000+ burning hours at L80), CCT - 1800K to 8000K, Preset colours - 24 colours , Colour, CRI>90, Optics - 6°,10°,15°,20°,30°,36°, Lumen output > 5606lm, Peak Intensity > 279616cd @ 6°, Dimming rate - 16 bit dimming, Cooling system - Forced Convection , Control protocol - DMX/DMX512/RDM, Operating Temperature - -20?-45?, Ingress protection - IP67, Corrosive protection - C5-M,Mechanical Impact Protection - IK10, Housing - Die-cast aluminium or better, Indiginious approvals - BIS.MQ / BV / LBT / Equivalent / Indegeneous BIS (Charriot Lower 20 nos & Upper 12 nos). |
| 896 | Supply, Installation, Testing and Commissioning of LED WASH WITH THE FOLLOWING MINIMUM SPECS:Max.power - 280W, Input voltage - AC100-277V, LED Qty - 9pcs 4 in 1 RGBA (with minimum 50,000+ burning hours at L80), CCT - 1800K to 8000K, Preset colours - 24 colours , Colour, CRI>90, Optics - 6°,10°,15°,20°,30°,36°, Lumen output > 5606lm, Peak Intensity > 279616cd @ 6°, Dimming rate - 16 bit dimming, Cooling system - Forced Convection , Control protocol - DMX/DMX512/RDM, Operating Temperature - -20?-45?, Ingress protection - IP67, Corrosive protection - C5-M,Mechanical Impact Protection - IK10, Housing - Die-cast aluminium or better, Indiginious approvals - BIS. MQ / BV / LBT / Equivalent / Indegeneous BIS (Charriot Upper section) |
| 897 | Supply, Installation, Testing and Commissioning of LED FAÇADE COIN LIGHT : MA POWER - 1.5W PER COIN, OPERATNG VOLTAGE - 24VDC, LED - SMDLED (6PCS IN A SINGLE DOT), BEAM ANGLE - 120°, PROTOCOL - DMX512, DISTNCE BETWEEN DOTS - 150-250MM, HOUSING - PC (POLYCARBONATE), IP RATING - IP67, OPERATING TEM- -30°-60°C, INDEGINIOUS APPROVAL - BIS. Indegeneous BIS (Charriot Top Section) |
| 898 | Supply, Installation, Testing and Commissioning of Signal Amplifier and Splitter : 8 Channel , Supports RDM and DMX 512, IP20, Tray Mounting Available.(Projections 2 nos & Lightings 10 nos). |
| 899 | Supply, Installation, Testing and Commissioning of CAT6 To DMX Converter Or Artnet : 16 Universe , Supports RDM and DMX 512, IP20, DIN RAIL Mounting Available. (Projections 2 nos & Lightings 8 nos). |
| 900 | Supply, Installation, Testing and Commissioning of Stand Alone DMX Recorder with the Following Specifications Covered : Network Protocols : Art-Net (I, II, 3, 4, incl. ArtSync), Streaming ACN (sACN / ANSI E1.31), Inbuild RDM Responder, Output 8x512 DMX channels output over Ethernet network, Recording Input 8x512 DMX channels input over Ethernet network, Remote-Control Input 8x 512 DMX channels received over Ethernet network, Supports SD, SDHC, and SDXC cards,Ethernet 2x RJ45, Auto MDI-X, daisy-chain support, 100 MBit/s, 4096 unicast MAC addresses, Case Non-conductive, V-0 flammability rating (UL94 test method), Temperature Range -10 °C to 70 °C (Operating) ,Relative Humidity 5 % to 80 %, IP Rating IP20, Certificates CE, EAC, FCC, RoHS. |
| 901 | Supply, Installation, Testing and Commissioning of True on-line 40 kVA or higher UPS with 3 Ph double Conversion - 3 ph input/3 ph output with 20/25/30 kVA hot swappable modules withsuitable capacity sealed maintenance free 12 Vbatteries, with a 30 mins backup time on full load with MS open MS Battery rack and Nyvin cable. |
| 902 | Supply and Run of 3 of 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe with painting of suitable colour. |
| 903 | Supply and Run of 3 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe with painting of suitable colour. |
| 904 | Supply and Run of 3 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe with painting of suitable colour. |
| 905 | Supply and Run of 1 of 16 sq.mm. (101/0.45) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe with painting of suitable colour. |
| 906 | Supply, Installation, Testing and Commissioning of HDMI Patch Cords 1.8MM. |
| 907 | Supply and Run of Armoured CAT 6 Cable in suitable PVC rigid pipe with painting of suitable colour. |
| 908 | GST @ 18% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
