Tender For Providing Furniture And Work Stations For New Paediatric Super Speciality Hospital In The Premises Of Svims, Tirupati, Tirupati-Andhra Pradesh

Providing Furniture And Work Stations For New Paediatric Super Speciality Hospital In The Premises Of Svims, Tirupati , Supplying And Placing Bench. The Seat And Back Shall Be Made Up Of High Quality Cold Rolled Ms Perforated Sheet Of 1.2Mm Thick, Pressed And Welded To Form The Shape. The Seat And Back Electrostatically Coated And Curved With Epoxy Powder And Then Cured Under Heat To Allow It To Form A Skin. The Armrest Shall Be Made Up Of Mild Steel Powder Coated Tube With 1.2Mm Thick. The Base Structure Shall Be Supported By Ms Powder Coated / Chrome Finish . There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. Overall Length For Three Seater In Mm : 1800 Mm, Overall Length For Two Seater In Mm : 1200 Mm, Overall Depth In Mm: 650Mm, Overall Height In Mm: 760 Mm, Seat Height From Floor In Mm: 450 Mm, Waiting Chair As Approved By Engineer In-Charge / Employer. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Two Seater, Supplying And Placing Bench. The Seat And Back Shall Be Made Up Of High Quality Cold Rolled Ms Perforated Sheet Of 1.2Mm Thick, Pressed And Welded To Form The Shape. The Seat And Back Electrostatically Coated And Curved With Epoxy Powder And Then Cured Under Heat To Allow It To Form A Skin. The Armrest Shall Be Made Up Of Mild Steel Powder Coated Tube With 1.2Mm Thick. The Base Structure Shall Be Supported By Ms Powder Coated / Chrome Finish. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. Overall Length For Three Seater In Mm: 1800 Mm, Overall Length For Two Seater In Mm : 1200 Mm, Overall Depth In Mm: 650Mm, Overall Height In Mm: 760 Mm, Seat Height From Floor In Mm: 450 Mm, Waiting Chair As Approved By Engineer In-Charge / Employer. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Three Seater, Providing And Placing Reception Table Reception Work Surface Top 25 Mm Thick In Bwp Grade Plywood At 750 Mm Ht. Side Gable End 25 Mm Thick In Bwp Grade Plywood. Reception Table Modesty 25 Mm Thick In Bwp Grade Plywood Of 1100 Mm Ht, Working Table Top Have Wire Manager Hole Cut For Passing The Wires. Ledge Top ( White ) Of 200 Mm ( D ) And Below The Ledge Top 200 Mm ( D ) 25 Mm Thick In Bwp Grade Plywood Supported With Studs. Front White Panel In 25 Mm Bwp Grade Plywood. Led Light To Be Placed Behind Front Panel. All Exposed Edges Sealed With 2 Mm Thick Pvc Edge Banding Tape. Table Shall Have 2 Plus 1 Filling Fixed Drawer Made Of 18 Mm Bwp Grade Plywood. Size Of The Drawer Is 400X450x725 Mm ( Ht ) . Drawers Should Be On The Levellers. Table Should Have Metal Cable Tray Duly Powder Coated Below Table Top For Electrical Points ( Without Switch And Socket Plates ) . Metal Wire Riser For Carrying Wires. .Size 1800 ( W ) X 600 ( D ) X1100 ( Ht ) Mm. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Supplying A Mid Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 48Kg / M3 And The Back Shall Be Made Of Moulded Plywood Padded With High Resilience Polyurethane Foam Having Density 32Kg / M3. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.7Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminium Die Cast With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Multi Angle Synchro Tilt Mechanism With 360 Degree Revolving And Tilt Tension Adjustment Which Provides Back Strength For The Chair., Providing And Placing A Sofa That Shall Be Constructed From Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 48 Kg / M3 In Seat And Having Density 32 Kg / M3 In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Density 32 Kg / M3. The Structure Shall Be Upholstered With Fabric Tapestry And. The Sofa Shall Be Supported On Wooden Leg .There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. Two Seater Sofa: Dimensions Length 120 Cm-180 Cm, Depth 90 Cm -100 Cm, Seat Height 30 Cm-40 Cm.Three Seater Sofa : Dimensions Length 180 Cm -250 Cm, Depth 90 Cm -100 Cm, Seat Height 30 Cm -40 Cm. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) .Two Seater, Providing And Placing A Sofa That Shall Be Constructed From Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 48 Kg / M3 In Seat And Having Density 32 Kg / M3 In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Density 32 Kg / M3. The Structure Shall Be Upholstered With Fabric Tapestry And. The Sofa Shall Be Supported On Wooden Leg .There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. Two Seater Sofa: Dimensions Length 120 Cm-180 Cm, Depth 90 Cm-100 Cm, Seat Height 30 Cm -40 Cm.Three Seater Sofa: Dimensions Length 180 Cm-250 Cm, Depth 90 Cm-100 Cm, Seat Height 30 Cm-40 Cm. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Three Seater, Providing And Placing Center Table. Table Of Size - 900 ( D ) X 900 ( L ) X 450 ( Ht ) .The Table Top Shall Be Made Out Of Solid Seasoned Wood, Finished With Semi Matt Polished Of Approved Shade, Design And Colour. The Table Having Same Size Of Plain And Clear Glass In The Table Top. Table Having Buffer For On The Bottom For Avoid The Scratches On The Floor. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Fowler Bed Delux ( Abs Panel ) Fowler Bed Should Be Of Following Minimum Dimension: 2030 Mm L X 900 Mm W X 600 Mm H ( Without Mattress ) .*Bed Frame Must Be Sturdy And Stable To Support Weight Of At Least 135 Kg. The Frame Structure Should Be Made Up Of At Least 16 G Crc, Rectangular Pipe Of 60Mm X30mm / Circular Pipe Of Size 30Mm*Bed Frame Mounted On Round / Rectangular Tube, Fitted With 125 Mm Castors, 2 With Breaks And Having Rustproof Body.*All Adjustments For Fowler Position Must Be Obtained From Crank Shaft, Manually Operated With Stainless Steel Foldable Handle On Both The Shaft.* The Finished Bed Must Be Rust Proof, Pre-Treated And Treated With Epoxy Polyester Antimicrobial Powder Coated To Increase The Bacteriostatic Property As Per Tender Document As An Attachment, Providing And Placing Bed Side Locker Deluxe Of Overall Sizes 400 ( W ) X 400 ( D ) X 800 ( H ) Mm. Crca Sheet Constructions. Having One Box And One Drawer. S.S Top With Three Sides Raise Edges. Epoxy Powder Coated. Drawer Having Recessed Type Of Handle For Opening Of The Drawer. Mounted On The Castors. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing Revolving Stool With Ms Tubular Four Leg Construction With Ms Foot Rest Ring Duly Epoxy Powder Coated. Top Size- 400 Mm And 650 Mm Ht. Top Made Up Of Ss Finish. Adjustable Revolving Top With Height Adjustment With Ms Screw Mechanism. The Stool Having Rubber Stumps. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing Examination Table Of Size: 1800 ( L ) X 500 ( D ) X 750 ( Ht ) Mm. Bed Is Made Up Of Ms Duly Finished With Epoxy Powder Coated. Bed Top Is In Two Part, Head Rest Is Adjustable. Under Structure In Ms Tubular Legs Duly Powder Coated With Rubber Stumps. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing Stretcher Trolley As Per Photograph Of Size 2130 ( W ) X 560 ( D ) X 810 ( Ht ) Mm. M.S Tubular Construction With Ms Removable Stretcher. Mounted On 150Mm Dia. Castors ( Two With Brakes And Two Nos Of Non Brakes ) . Epoxy Powder Coated.The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Supplying And Placing Of Single Bed For Structure Metal Frame Duly Powder Coated Is Used And Plywood Is Used In Bed Seat As Per The Design. Overall Size 900X1980x800 / 500 Ht. Bed Plinth Height 420Mm. Inner Frame 50 X 25Mm With 25X 25 Cross Members At Min. Bed Seat Is Made Up Of 12Mm Plywood With White Laminate Lipping On All Edges. Complete With All Necessary Hardware ( Without Matterss ) Of Approved Make. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing Table With Side Storage .The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. The Side Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. And Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Storage Is Having Openable Shutter With Locking Arrangement .The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves. Table Size: 1200 ( W ) X 600 ( D ) X 750 ( H ) Mm. Side Storage Size:- 900 ( W ) X 400 ( D ) X 750 ( H ) Mm, Providing And Placing Table With Side Storage .The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. The Side Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. And Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Storage Is Having Openable Shutter With Locking Arrangement .The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves.Table Size: 1350 ( W ) X 750 ( D ) X 750 ( H ) Mm. Side Storage Size:- 900 ( W ) X 400 ( D ) X 750 ( H ) Mm, Providing And Placing Table With Side Storage .The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. The Side Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. And Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Storage Is Having Openable Shutter With Locking Arrangement .The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves.Table Size: 1400 ( W ) X 600 ( D ) X 750 ( H ) Mm. Side Storage Size:- 900 ( W ) X 400 ( D ) X 750 ( H ) Mm, Providing And Placing Table With Side Storage .The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. The Side Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. And Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Storage Is Having Openable Shutter With Locking Arrangement .The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves.Table Size: 1500 ( W ) X 750 ( D ) X 750 ( H ) Mm. Side Storage Size:- 900 ( W ) X 400 ( D ) X 750 ( H ) Mm, Providing And Placing Table With Side Storage .The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. The Side Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. And Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Storage Is Having Openable Shutter With Locking Arrangement .The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves.Table Size: 1700 ( W ) X 750 ( D ) X 750 ( H ) Mm. Side Storage Size:- 1050 ( W ) X 400 ( D ) X 750 ( H ) Mm, Providing And Placing Table With Side Storage .The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. The Side Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. And Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Storage Is Having Openable Shutter With Locking Arrangement .The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves.Table Size: 1950 ( W ) X 750 ( D ) X 750 ( H ) Mm. Side Storage Size:- 900 ( W ) X 400 ( D ) X 750 ( H ) Mm, Providing And Placing Cabinet .The Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding Tape Pressed At 200 Degree C With Hot Melt Glue On Special Machines. The Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood. The Storage Is Having Openable Shutter With Locking Arrangement. The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Size: 1650 ( W ) X 450 ( D ) X 750 ( Ht ) Mm, Providing And Placing Cabinet .The Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding Tape Pressed At 200 Degree C With Hot Melt Glue On Special Machines. The Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood. The Storage Is Having Openable Shutter With Locking Arrangement. The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Size: 1700 ( W ) X 450 ( D ) X 750 ( Ht ) Mm., Providing And Placing Ergonomically Designed, Comfortable And Aesthetically Appealing High Back Chair. The Seat Shall Be Made Of 12Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Polyurethane Foam Having Density 48 Kg / M3. The Seat Shall Be Upholstered With Fabric Tapestry 0.8Mm Thick And 300 Gsm And The Back Shall Be Made Of Polypropylene Net Cover With Breathable Mesh Tapestry. The Backrest Shall Be Made By Keeping Contoured Lumbar Support Which Helps To Provide Full Back Support And Maintain The Natural Curvature Of The Spine. The Chair Shall Be Supplied With Pu Adjustable Arms. The Chair Shall Have Synchro Tilt Mechanism With 360 Degree Revolving With Upright Position Locking. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Upto 100Mm With Bifma Standard Class-3 Gas Lift To Suit Them Using The Lever Under The Seat. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing Table And Mobile Pedestal As Per Photograph. The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. Pedestal Are Made Of 18Mm Thick Bwp Grade Plywood With 2 Drawer Plus 1Filing .The Drawer Are Made Mobile With Use Of Castors. The Drawer Units Are Provided With Center Locking Arrangement. No Sharp Edges All Corners And Edges. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Table Size: 1200 ( W ) X 600 ( D ) X 750 ( Ht ) Mm., Providing And Placing Table And Mobile Pedestal As Per Photograph. The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. Pedestal Are Made Of 18Mm Thick Bwp Grade Plywood With 2 Drawer Plus 1Filing .The Drawer Are Made Mobile With Use Of Castors. The Drawer Units Are Provided With Center Locking Arrangement. No Sharp Edges All Corners And Edges. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Table Size: 1400 ( W ) X 750 ( D ) X 750 ( Ht ) Mm., Providing And Placing Table And Mobile Pedestal As Per Photograph. The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Gable End Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Modesty Panel Of The Table Shall Be 600Mm Height Made Of 18Mm Thick Bwp Grade Plywood. Pedestal Are Made Of 18Mm Thick Bwp Grade Plywood With 2 Drawer Plus 1Filing .The Drawer Are Made Mobile With Use Of Castors. The Drawer Units Are Provided With Center Locking Arrangement. No Sharp Edges All Corners And Edges. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Table Size: 2400 ( W ) X 750 ( D ) X 750 ( Ht ) Mm., Supplying And Placing Of Executive Table. Size Of The Main Table 2400 Mm X 750 Mm X 750 Mm. Side Storage Size:- 1650 ( W ) X450 ( D ) X650 ( Ht ) .Work Surface Made Of 50 Mm Thick Bwp Grade Plywood. Modesty Panel Made Of 18 Mm Thick Bwp Grade Plywood. Under Structure Made Of 50 Mm Thick Bwp Grade Plywood. Side Unit Shall Belong To The Same Family And Shall Have Overall Dimensions Of 1650 Mm X 450 Mmx 600 Mm. The Side Storage Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. And Under Structure Shall Be Made Out Of 18 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. The Storage Is Having Openable Shutter With Locking Arrangement. The Storage Is Having 18Mm Thk. Bwp Grade Plywood Shelves. Pedestal Size 400 ( W ) X 450 ( D ) X 600 ( Ht ) Mm. Pedestal Are Made Of 18Mm Thick Bwp Grade Plywood With 2 Drawer Plus 1Filing.The Drawer Are Use Of Castors. The Drawer Units Are Provided With Center Locking Arrangement. No Sharp Edges All Corners And Edges. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Supplying And Placing A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 48Kg / M3 And The Back Shall Be Made Of Moulded Plywood Padded With High Resilience Polyurethane Foam Having Density 32Kg / M3. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.7Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminium Die Cast With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability Of The Chair Shall Have Multi Angle Synchro Tilt Mechanism With 360 Degree Revolving Mechanism And Tilt Tension Adjustment Which Provides Back Strength For The Chair., Providing And Placing A Three Seater Sofa That Shall Be Constructed From Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 48Kg / M3 In Seat And Having Density 32Kg / M3 In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Density 32Kg / M3. The Structure Shall Be Upholstered With Leatherite Tapestry. The Sofa Shall Be Supported On Wooden Leg . There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. Three Seater Sofa : Dimensions Length 180 Cm -250 Cm, Depth 90Cm -100 Cm, Seat Height 30Cm -40Cm. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing A Single Seater Sofa That Shall Be Constructed From Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 48Kg / M3 In Seat And Having Density 32Kg / M3 In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Density 32Kg / M3.The Structure Shall Be Upholstered With Leatherite Tapestry. The Sofa Shall Be Supported On Wooden Leg. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. Single Seater Sofa : Dimensions Length 75 Cm-100Cm, Depth 90Cm-100Cm, Seat Height 30Cm-40Cm. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Fixing Centre Table Size 1200 ( W ) X 600 ( D ) X 425 ( Ht. ) Mm. The Table Top Shall Be Made Out Of Wooden Frame With Glass Top. Under Structure In Wooden With Polish.The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Fixing Side Table. Size 600 ( W ) X 600 ( D ) X 425 ( Ht. ) Mm. The Table Top Shall Be Made Out Of Wooden Frame With Glass Top. Under Structure In Wooden With Polish. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Supplying And Placing Of Conference Table Of Size:- 2250 Mm ( W ) X 1100 Mm ( D ) X 750 ( Ht ) . The Table Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood Of Approved Shade, Design And Colour. All Exposed Edges Are Sealed With 2Mm Thick Pvc Edge Banding Tape Pressed At 200 Degree C With Hot Melt Glue On Special Machines. The Under Structure Loop Legs Shall Be Made Of Crca Pipe Section Of Size 60X30mm Of Thickness 1.2Mm. The Leg Shall Be Connected With Beam Of Thickness 1.2 Mm. All These Legs And Beams Shall Be Fitted To Each Other By Connectors And Necessary Hardwares. The Legs Shall Be Having Adjustable Leveller Shoe. This Leveller Shoe Shall Be Provided At Bottom Of Leg Which Allow 10-20Mm Adjustment For Floor Unevenness. The All Legs And Beams Shall Be Duly Finished With Powder Coating In Desired Shade / Colour. Powder Coating Shall Be 40-60Microns Thickness. The Beam Shall Be Made Of Crca Pipe Of Thickness 1.2 Mm. The Metal Flipper Is Fixed On Worktop Of Size 400 X 120Mm Switch Socket With Metal Cable Tray Below Table Top For Electrical Points With Centre Leg For Carrying Wires. No Sharp Edges All Corners And Edges. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing Of Cafe Table . Size:- 1600 Mm ( W ) X 650 ( D ) X 750 ( Ht ) .The Top Shall Be Made Out Of 25 Mm Thick Bwp Grade Plywood. The Under Structure Shall Be Made Out Of Ms Chrome Frame. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing In Position Chair . Chair Seat And Back Made Up Of Hi-Quality Polished Ply. The Chair Shall Be Supplied With Metal Frame And The Under Structure Shall Be Supported On Four Legs Made Up Of Round Chromed 18 Gauge Steel Tube Frame . There Shall Be Ppcp Shoe Provided At Bottom To Avoid Scratches On The Floor. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Supplying Auditorium Chair Push Back Of Standard Size As Per Design. Seat Inner Frame Injection Moulded Ppcp Inner Seat Frame With 4 Fly Nuts Embedded Cushion 45 Plus Density Polyurethane Foam Cushion 100 Percent Polyester Fr Fabric. Seat. Fabric 100 Percent Polyester Fr Fabric. Back Inner Frame 25Mm X 5Mm X 3Mm Ms Flat Made Back Inner Frame With Threading Holes Cushion 45 Plus Density Polyurethane Foam Cushion Seat. Fabric 100 Percent Polyester Fr Fabric. Quillting Laminated With 5Mm Foam Underlay With Polyester Lining Underneath. Back Cover Back Side Of The Back Covered With Injection Moulded Ppcp Cover. Push Back Total Weight 8.25 Kg, Providing And Placing A Personal Locker In Perfectly Upright And Straight Position. The Overall Size Of The Personal Locker Is 380 ( W ) X 450 ( D ) X 1830 ( Ht ) Mm. The Personal Locker Shall Have 6 Nos. Of Doors. It Shall Be ( Like Top, Side, Back, Door, Shelf Etc. ) Made Of 0.8Mm Thickness High Yield Strength Crca Sheet Of Grade D Confirming To Is 513. The Main Frame And Base Shall Be Semi Welded And Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Of Each Shelf Shall Be 40 Kg. The Door Shall Be Operated With Aesthetically Appealing Snap Fit Abs Plastic Handle And Concealed Crank Hinge. Adjustable Leveller Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level And Support Structure. The Structure Shall Be Supplied Duly Powder Coated With 40-50 Microns With 7 Tank Pre Treatment Process. Locker Shall Have Individual Locking Arrangement. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Providing And Placing Class Room Chair Ergonomically Designed For User Comfort And Shall Have Aesthetically Appealing Design. The Seat Shall Be Made Of 12 Mm Thick Hot Pressed Plywood Upholstered With High Resilience Polyurethane Foam Having Density 48Kg / M3 With Fabric Tapestry Of 300 Gsm And The Back Shall Be Made Of Polypropylene. The Arm Shall Be Provided Ms Chrome Plated Having Dia. 25.4 Mm With Pp On Top For Comfort. The Frame Structure Shall Be Four Legged Support Type Made Up Of Chrome Plate Round Pipe. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. Seat Width ( W ) 490Mm, Seat Depth ( D ) 490 Mm, Seat Height 450 Mm. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Supplying And Placing A Sofa That Shall Be Constructed From Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately.The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 48 Kg / M3 In Seat And Having Density 32 Kg / M3 In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 32 Kg / M3. The Complete Structure Shall Be Fully Upholstered With Leatherite Tapestry 0.7Mm Thick And 535 Gsm. The Under Structure Shall Have Ms Leg. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. Single Seater Sofa: Dimensions Length 75 Cm-100 Cm, Depth 90 Cm100 Cm, Seat Height 30 Cm-40 Cm.Three Seater Sofa: Dimensions Length 180 Cm-250 Cm, Depth 90 Cm-100 Cm, Seat Height 30 Cm-40 Cm. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Single Seater Sofa, Supplying And Placing A Sofa That Shall Be Constructed From Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately.The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 48 Kg / M3 In Seat And Having Density 32 Kg / M3 In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 32 Kg / M3. The Complete Structure Shall Be Fully Upholstered With Leatherite Tapestry 0.7Mm Thick And 535 Gsm. The Under Structure Shall Have Ms Leg. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. Single Seater Sofa: Dimensions Length 75 Cm-100 Cm, Depth 90 Cm100 Cm, Seat Height 30 Cm-40 Cm.Three Seater Sofa: Dimensions Length 180 Cm-250 Cm, Depth 90 Cm-100 Cm, Seat Height 30 Cm-40 Cm. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) . Three Seater Sofa, Providing And Placing Of Single Bed As Per Photograph Without Box Made Of Best Quality Bwp Grade Plywood For Structure And Plywood Is Used In Bed Seat As Per The Design. Overall Size 900 X1800 Mm. Bed Height 420 Mm. Inner Frame 50 X 25 Mm With 20 X 20 Cross Members At Min. Bed Seat Is Made Up Of 12 Mm Plywood Lipping On All Edges. Complete With All Necessary Hardware ( Without Matterss ) Of Approved Make. The Rate Is Inclusive Of All Taxes And Other Incidental Charges Etc., Complete. ( Excluding Gst ) ., Panel Based Partition Of 60 Mm Thickness With Framework Made Of Aluminium Alloy Extrusions. All Aluminium Parts Are Duly Finished With Powder Coating In Desired Shade / Colour. Powder Coating Shall Be 40-60Microns Thickness And Shall Be Pre-Treated For Seven Stage Anti-Corrosion Treatment Followed By Epoxy Powder Coating. Middle Member In Aluminium Alloy Extrusion Of Size 60 X 30 Mm Having Thickness Of 1.2 Mm Duly Epoxy Polyester Powder Coated. Bottom Raceway / Skirting In Aluminium Alloy Extrusion Of Size 100Mm Ht. Having Thickness Of 1.5 Mm Duly Epoxy Polyester Powder Coated. Intermediate Raceway ( Optional ) Wherever Is Required Above / Below Worktop, In Aluminium Alloy Extrusion Of Size 100 Mm Ht. Linear Workstation Size: 1200 ( W ) X 600 ( D ) X 750 ( H ) Mm With Mobile Drawer, Panel Based Partition Of 60 Mm Thickness With Framework Made Of Aluminium Alloy Extrusions. All Aluminium Parts Are Duly Finished With Powder Coating In Desired Shade / Colour. Powder Coating Shall Be 40-60Microns Thickness And Shall Be Pre-Treated For Seven Stage Anti-Corrosion Treatment Followed By Epoxy Powder Coating. Middle Member In Aluminium Alloy Extrusion Of Size 60 X 30 Mm Having Thickness Of 1.2 Mm Duly Epoxy Polyester Powder Coated. Bottom Raceway / Skirting In Aluminium Alloy Extrusion Of Size 100Mm Ht. Having Thickness Of 1.5 Mm Duly Epoxy Polyester Powder Coated. Intermediate Raceway ( Optional ) Wherever Is Required Above / Below Worktop, In Aluminium Alloy Extrusion Of Size 100 Mm Ht. Linear Workstation Size: 1400 ( W ) X 750 ( D ) X 750 ( H ) Mm With Side Unit 900 X 450 X750 ( Ht ) , Providing And Placing Ergonomically Designed, Comfortable And Aesthetically Appealing Mid Back Chair. The Seat Shall Be Made Of 12Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Polyurethane Foam Having Density 48 Kg / M3. The Seat Shall Be Upholstered With Fabric Tapestry 0.8Mm Thick And 300 Gsm And The Back Shall Be Made Of Polypropylene Net Cover With Breathable Mesh Tapestry. The Backrest Shall Be Made By Keeping Contoured Lumbar Support Which Helps To Provide Full Back Support And Maintain The Natural Curvature Of The Spine. The Chair Shall Be Supplied With Pu Adjustable Arms. The Chair Shall Have Synchro Tilt Mechanism With 360 Degree Revolving With Upright Position Locking. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Upto 100Mm With Bifma Standard Class-3 Gas Lift To Suit Them Using The Lever Under The Seat.

Refer document

INR 424000.0 /-

Refer document

Sl. No.	Item Name
1	Supplying and Placing bench. The seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape. The seat and back electrostatically coated and curved with epoxy powder and then cured under heat to allow it to form a skin. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated/chrome finish . There shall be PPCP shoe provided at the base to avoid scratches on the floor. Overall Length for three seater in mm : 1800 mm, Overall Length for two seater in mm : 1200 mm, Overall Depth in mm: 650mm, Overall Height in mm: 760 mm, Seat Height from Floor in mm: 450 mm, waiting chair as approved by engineer in-charge/employer. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Two seater
2	Supplying and Placing bench. The seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape. The seat and back electrostatically coated and curved with epoxy powder and then cured under heat to allow it to form a skin. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated/chrome finish. There shall be PPCP shoe provided at the base to avoid scratches on the floor. Overall Length for three seater in mm: 1800 mm, Overall Length for two seater in mm : 1200 mm, Overall Depth in mm: 650mm, Overall Height in mm: 760 mm, Seat Height from Floor in mm: 450 mm, waiting chair as approved by engineer in-charge/employer. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Three seater
3	Providing and Placing Reception Table Reception work surface top 25 mm thick in BWP grade plywood at 750 mm ht. Side Gable end 25 mm thick in BWP grade plywood. Reception table modesty 25 mm thick in BWP grade plywood of 1100 mm ht, working Table top have wire manager hole cut for passing the wires. Ledge top(white)of 200 mm(d)and below the ledge top 200 mm(d) 25 mm thick in BWP grade plywood supported with studs. Front white panel in 25 mm BWP grade plywood. LED light to be placed behind front panel. All exposed edges sealed with 2 mm thick pvc edge banding tape. Table shall have 2 PLUS 1 filling fixed drawer made of 18 mm BWP grade plywood. Size of the drawer is 400x450x725 mm(ht). Drawers should be on the levellers. Table should have metal cable tray duly powder coated below table top for electrical points (without switch and socket plates). Metal wire riser for carrying wires. .Size 1800 (w) x 600(d) x1100(ht) mm. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
4	Providing and supplying a Mid back chair with ergonomic design, comfortable and aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg/m3 and the back shall be made of moulded plywood padded with high resilience polyurethane foam having density 32kg/m3. The seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. The chair shall be supplied with aluminium die cast with cushion arm having leatherite top completely joint with seat. For seating durability the chair shall have Multi Angle Synchro tilt mechanism with 360 degree revolving and tilt tension adjustment which provides back strength for the chair.
5	Providing and Placing a sofa that shall be constructed from wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 48 Kg/m3 in seat and having density 32 Kg/m3 in back. There shall be cushion arm provided padded with high resilience polyurethane foam density 32 Kg/m3. The structure shall be upholstered with Fabric tapestry and. The sofa shall be supported on Wooden leg .There shall be shoe provided at the bottom to avoid scratches on the floor. Two seater sofa: Dimensions Length 120 cm-180 cm, Depth 90 cm -100 cm, seat height 30 cm-40 cm.Three seater sofa : Dimensions Length 180 cm -250 cm, Depth 90 cm -100 cm, seat height 30 cm -40 cm. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).Two seater
6	Providing and Placing a sofa that shall be constructed from wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 48 Kg/m3 in seat and having density 32 Kg/m3 in back. There shall be cushion arm provided padded with high resilience polyurethane foam density 32 Kg/m3. The structure shall be upholstered with Fabric tapestry and. The sofa shall be supported on Wooden leg .There shall be shoe provided at the bottom to avoid scratches on the floor. Two seater sofa: Dimensions Length 120 cm-180 cm, Depth 90 cm-100 cm, seat height 30 cm -40 cm.Three seater sofa: Dimensions Length 180 cm-250 cm, Depth 90 cm-100 cm, seat height 30 cm-40 cm. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Three seater
7	Providing and Placing Center table. Table of Size - 900(D) x 900(L) x 450(ht) .The table top shall be made out of solid seasoned wood, Finished with semi matt polished of approved shade, design and colour. The table having same size of plain and clear glass in the table top. Table having buffer for on the bottom for avoid the scratches on the floor. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
8	FOWLER BED DELUX ( ABS PANEL) Fowler bed should be of following minimum dimension: 2030 mm L x 900 mm W x 600 mm H (without mattress).*Bed frame must be sturdy and stable to support weight of at least 135 kg. The frame structure should be made up of at least 16 G CRC, rectangular pipe of 60mm x30mm / circular pipe of size 30mm*Bed frame mounted on round / rectangular tube, fitted with 125 mm castors, 2 with breaks and having rustproof body.*All adjustments for fowler position must be obtained from crank shaft, manually operated with stainless steel foldable handle on both the shaft.* The finished bed must be rust proof, pre-treated and treated with epoxy polyester antimicrobial powder coated to increase the bacteriostatic property AS PER TENDER DOCUMENT AS AN ATTACHMENT
9	Providing and placing Bed Side Locker Deluxe of overall sizes 400 (W) x 400(D) x 800 (H) mm. CRCA Sheet Constructions. Having one Box and one drawer. S.S Top with Three Sides raise edges. Epoxy Powder Coated. Drawer having recessed type of handle for opening of the drawer. Mounted on the castors. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
10	Providing and Placing Revolving Stool with MS Tubular four leg construction with MS foot rest ring duly epoxy powder coated. Top Size- 400 mm and 650 mm ht. Top made up of SS finish. Adjustable Revolving top with height adjustment with MS screw mechanism. The stool having rubber stumps. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
11	Providing and placing Examination Table of Size: 1800(L) x 500(D) x 750(HT) mm. Bed is made up of MS duly finished with epoxy powder coated. Bed Top is in two part, head rest is adjustable. Under structure in MS tubular legs duly powder coated with rubber stumps. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
12	Providing and placing Stretcher Trolley as per photograph of size 2130 (W) x 560(d) x 810 (ht)mm. M.S Tubular construction with MS removable stretcher. Mounted on 150mm Dia. Castors(Two with brakes and two nos of non brakes). Epoxy Powder coated.The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
13	Supplying and placing of Single Bed For structure metal frame duly powder coated is used and plywood is used in bed seat as per the design. Overall size 900x1980x800/500 ht. Bed plinth Height 420mm. Inner Frame 50 x 25mm with 25x 25 cross members at min. Bed seat is made up of 12mm plywood with white laminate lipping on all edges. complete with all necessary hardware (WITHOUT MATTERSS) of approved make. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
14	Providing and Placing Table with Side Storage .The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. The Side Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick BWP grade plywood of approved shade, design and colour. The storage is having openable shutter with locking arrangement .The storage is having 18mm thk. BWP grade plywood shelves. Table Size: 1200 (w) x 600 (D) x 750 (H) mm. Side Storage Size:- 900 (w) x 400 (D) x 750 (H) mm
15	Providing and Placing Table with Side Storage .The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. The Side Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick BWP grade plywood of approved shade, design and colour. The storage is having openable shutter with locking arrangement .The storage is having 18mm thk. BWP grade plywood shelves.Table Size: 1350 (w) x 750 (D) x 750 (H) mm. Side Storage Size:- 900 (w) x 400 (D) x 750 (H) mm
16	Providing and Placing Table with Side Storage .The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. The Side Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick BWP grade plywood of approved shade, design and colour. The storage is having openable shutter with locking arrangement .The storage is having 18mm thk. BWP grade plywood shelves.Table Size: 1400 (w) x 600 (D) x 750 (H) mm. Side Storage Size:- 900 (w) x 400 (D) x 750 (H) mm
17	Providing and Placing Table with Side Storage .The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. The Side Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick BWP grade plywood of approved shade, design and colour. The storage is having openable shutter with locking arrangement .The storage is having 18mm thk. BWP grade plywood shelves.Table Size: 1500 (w) x 750 (D) x 750 (H) mm. Side Storage Size:- 900 (w) x 400 (D) x 750 (H) mm
18	Providing and Placing Table with Side Storage .The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. The Side Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick BWP grade plywood of approved shade, design and colour. The storage is having openable shutter with locking arrangement .The storage is having 18mm thk. BWP grade plywood shelves.Table Size: 1700 (w) x 750 (D) x 750 (H) mm. Side Storage Size:- 1050 (w) x 400 (D) x 750 (H) mm
19	Providing and Placing Table with Side Storage .The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. The Side Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick BWP grade plywood of approved shade, design and colour. The storage is having openable shutter with locking arrangement .The storage is having 18mm thk. BWP grade plywood shelves.Table Size: 1950 (w) x 750 (D) x 750 (H) mm. Side Storage Size:- 900 (w) x 400 (D) x 750 (H) mm
20	Providing and Placing Cabinet .The Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines. The under structure shall be made out of 18 mm thick BWP grade plywood. The storage is having openable shutter with locking arrangement. The storage is having 18mm thk. BWP grade plywood shelves. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Size: 1650(w) x 450(D) x 750(Ht)mm
21	Providing and Placing Cabinet .The Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines. The under structure shall be made out of 18 mm thick BWP grade plywood. The storage is having openable shutter with locking arrangement. The storage is having 18mm thk. BWP grade plywood shelves. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Size: 1700(w) x 450(D) x 750(Ht)mm.
22	Providing and Placing ergonomically designed, comfortable and aesthetically appealing High back chair. The seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam having density 48 kg/m3. The seat shall be upholstered with fabric tapestry 0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover with breathable mesh tapestry. The backrest shall be made by keeping contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. The chair shall be supplied with PU adjustable arms. The chair shall have synchro tilt mechanism with 360 degree revolving with upright position locking. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with BIFMA standard class-3 gas lift to suit them using the lever under the seat. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
23	Providing and Placing Table and Mobile Pedestal as per photograph. The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. Pedestal are made of 18mm thick BWP grade plywood with 2 drawer PLUS 1Filing .The drawer are made mobile with use of castors. The Drawer units are provided with center locking arrangement. No sharp edges all corners and edges. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Table Size: 1200(w) x 600(D) x 750(Ht)mm.
24	Providing and Placing Table and Mobile Pedestal as per photograph. The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. Pedestal are made of 18mm thick BWP grade plywood with 2 drawer PLUS 1Filing .The drawer are made mobile with use of castors. The Drawer units are provided with center locking arrangement. No sharp edges all corners and edges. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Table Size: 1400(w) x 750(D) x 750(Ht)mm.
25	Providing and Placing Table and Mobile Pedestal as per photograph. The Table Top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The Gable end shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. The modesty panel of the table shall be 600mm height made of 18mm thick BWP grade plywood. Pedestal are made of 18mm thick BWP grade plywood with 2 drawer PLUS 1Filing .The drawer are made mobile with use of castors. The Drawer units are provided with center locking arrangement. No sharp edges all corners and edges. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Table Size: 2400(w) x 750(D) x 750(Ht)mm.
26	Supplying and Placing of Executive Table. Size of the MAIN TABLE 2400 mm x 750 mm x 750 mm. Side Storage Size:- 1650(w)x450(d)x650(ht).Work Surface Made of 50 mm thick BWP grade plywood. Modesty Panel Made of 18 mm thick BWP grade plywood. Under structure Made of 50 mm Thick BWP grade plywood. Side Unit shall Belong to the same family and shall have overall dimensions of 1650 mm x 450 mmx 600 mm. The Side Storage top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick BWP Grade plywood of approved shade, design and colour. The storage is having openable shutter with locking arrangement. The storage is having 18mm thk. BWP grade plywood shelves. Pedestal Size 400(w) x 450(d) x 600(ht)mm. Pedestal are made of 18mm thick BWP grade plywood with 2 drawer PLUS 1Filing.The drawer are use of castors. The Drawer units are provided with center locking arrangement. No sharp edges all corners and edges. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
27	Supplying and Placing a High back chair with ergonomic design, comfortable and aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg/m3 and the back shall be made of moulded plywood padded with high resilience polyurethane foam having density 32kg/m3. The seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. The chair shall be supplied with aluminium die cast with cushion arm having leatherite top completely joint with seat. For seating durability of the chair shall have Multi Angle Synchro tilt mechanism with 360 degree revolving mechanism and tilt tension adjustment which provides back strength for the chair.
28	Providing and Placing a Three seater sofa that shall be constructed from wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 48Kg/m3 in seat and having density 32Kg/m3 in back. There shall be cushion arm provided padded with high resilience polyurethane foam density 32Kg/m3. The structure shall be upholstered with Leatherite tapestry. The sofa shall be supported on Wooden leg . There shall be shoe provided at the bottom to avoid scratches on the floor. Three seater sofa : Dimensions Length 180 cm -250 cm, Depth 90cm -100 cm, seat height 30cm -40cm. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
29	Providing and Placing a Single seater sofa that shall be constructed from wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 48Kg/m3 in seat and having density 32Kg/m3 in back. There shall be cushion arm provided padded with high resilience polyurethane foam density 32Kg/m3.The structure shall be upholstered with leatherite tapestry. The sofa shall be supported on Wooden leg. There shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa : Dimensions Length 75 cm-100cm, Depth 90cm-100cm, seat height 30cm-40cm. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
30	Providing and fixing Centre table Size 1200(W) x 600 (d) x 425(ht.)mm. The Table Top shall be made out of Wooden Frame with glass top. Under structure in wooden with polish.The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
31	Providing and fixing Side table. Size 600(W) x 600 (d) x 425(ht.)mm. The Table Top shall be made out of Wooden Frame with glass top. Under structure in wooden with polish. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
32	Supplying and Placing of Conference table of size:- 2250 mm (w) X 1100 mm (d) x 750(HT). The table top shall be made out of 25 mm thick BWP grade plywood of approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines. The under structure Loop legs shall be made of CRCA pipe section of size 60x30mm of thickness 1.2mm. The leg shall be connected with beam of thickness 1.2 mm. All these legs and beams shall be fitted to each other by connectors and necessary hardwares. The legs shall be having adjustable leveller shoe. This leveller shoe shall be provided at bottom of leg which allow 10-20mm adjustment for floor unevenness. The all legs and beams shall be duly finished with powder coating in desired shade/colour. Powder coating shall be 40-60microns thickness. The beam shall be made of CRCA pipe of thickness 1.2 mm. The Metal Flipper is fixed on worktop of size 400 x 120mm switch socket with metal cable tray below Table top for Electrical points with Centre leg for carrying wires. No sharp edges all corners and edges. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
33	Providing and Placing of Cafe table . Size:- 1600 mm (w) x 650(d) x 750(HT).The top shall be made out of 25 mm thick BWP grade plywood. The under structure shall be made out of MS Chrome Frame. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
34	Providing and placing in position Chair . Chair seat and back made up of hi-quality Polished Ply. The chair shall be supplied with metal frame and the under structure shall be supported on four legs made up of round chromed 18 gauge steel tube frame . There shall be PPCP shoe provided at bottom to avoid scratches on the floor. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
35	Providing and Supplying auditorium chair PUSH BACK of standard size as per design. SEAT Inner Frame Injection Moulded PPCP Inner Seat frame with 4 Fly nuts embedded cushion 45 PLUS Density Polyurethane Foam Cushion 100 PERCENT Polyester FR Fabric. Seat. Fabric 100 PERCENT Polyester FR Fabric. BACK Inner Frame 25mm x 5mm x 3mm MS Flat Made Back Inner Frame with threading holes cushion 45 PLUS Density Polyurethane Foam Cushion Seat. Fabric 100 PERCENT Polyester FR Fabric. Quillting Laminated with 5mm Foam underlay with polyester lining underneath. Back Cover Back Side of the Back Covered with Injection moulded PPCP Cover. Push Back Total Weight 8.25 Kg
36	Providing and placing a personal locker in perfectly upright and straight position. The overall size of the personal locker is 380(w) x 450 (d) x 1830(ht)mm. The personal locker shall have 6 nos. of doors. It shall be (like top, side, back, door, shelf etc.) made of 0.8mm thickness high yield strength CRCA sheet of grade D confirming to IS 513. The main frame and base shall be semi welded and folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg. The door shall be operated with aesthetically appealing snap fit ABS plastic handle and concealed crank hinge. Adjustable leveller shall be provided with metal insert to resist scratches on the floor and also level and support structure. The structure shall be supplied duly powder coated with 40-50 microns with 7 tank pre treatment process. Locker shall have individual locking arrangement. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
37	Providing and Placing Class room Chair ergonomically designed for user comfort and shall have aesthetically appealing design. The seat shall be made of 12 mm thick hot pressed plywood upholstered with high resilience polyurethane foam having density 48kg/m3 with fabric tapestry of 300 GSM and the back shall be made of polypropylene. The arm shall be provided MS chrome plated having Dia. 25.4 mm with PP on top for comfort. The frame structure shall be four legged support type made up of chrome plate round pipe. There shall be PPCP shoe provided at the base to avoid scratches on the floor. seat width (w) 490mm, seat depth (D) 490 mm, seat height 450 mm. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
38	Supplying and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately.The frame shall be padded with high resilience polyurethane foam having density 48 Kg/m3 in seat and having density 32 Kg/m3 in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32 Kg/m3. The complete structure shall be fully upholstered with leatherite tapestry 0.7mm thick and 535 GSM. The under structure shall have MS leg. There shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa: Dimensions Length 75 cm-100 cm, Depth 90 cm100 cm, seat height 30 cm-40 cm.Three seater sofa: Dimensions Length 180 cm-250 cm, Depth 90 cm-100 cm, seat height 30 cm-40 cm. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Single seater sofa
39	Supplying and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately.The frame shall be padded with high resilience polyurethane foam having density 48 Kg/m3 in seat and having density 32 Kg/m3 in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32 Kg/m3. The complete structure shall be fully upholstered with leatherite tapestry 0.7mm thick and 535 GSM. The under structure shall have MS leg. There shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa: Dimensions Length 75 cm-100 cm, Depth 90 cm100 cm, seat height 30 cm-40 cm.Three seater sofa: Dimensions Length 180 cm-250 cm, Depth 90 cm-100 cm, seat height 30 cm-40 cm. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST). Three seater sofa
40	Providing and Placing of Single Bed as per photograph without box made of best quality BWP grade plywood for structure and plywood is used in bed seat as per the design. Overall size 900 x1800 mm. Bed Height 420 mm. Inner Frame 50 x 25 mm with 20 x 20 cross members at min. Bed seat is made up of 12 mm plywood lipping on all edges. complete with all necessary hardware (WITHOUT MATTERSS) of approved make. The rate is inclusive of all taxes and other incidental charges etc., complete. (Excluding GST).
41	Panel based partition of 60 mm thickness with framework made of aluminium alloy extrusions. All Aluminium parts are duly finished with powder coating in desired shade/colour. powder coating shall be 40-60microns thickness and shall be pre-treated for seven stage anti-corrosion treatment followed by epoxy powder coating. Middle Member in aluminium alloy extrusion of size 60 x 30 mm having thickness of 1.2 mm duly epoxy polyester powder coated. Bottom Raceway/Skirting in aluminium alloy extrusion of size 100mm ht. having thickness of 1.5 mm duly epoxy polyester powder coated. Intermediate Raceway(optional) wherever is required above / below worktop, in aluminium alloy extrusion of size 100 mm ht. Linear workstation Size: 1200 (w) x 600 (D) x 750 (H) mm with Mobile Drawer
42	Panel based partition of 60 mm thickness with framework made of aluminium alloy extrusions. All Aluminium parts are duly finished with powder coating in desired shade/colour. powder coating shall be 40-60microns thickness and shall be pre-treated for seven stage anti-corrosion treatment followed by epoxy powder coating. Middle Member in aluminium alloy extrusion of size 60 x 30 mm having thickness of 1.2 mm duly epoxy polyester powder coated. Bottom Raceway/Skirting in aluminium alloy extrusion of size 100mm ht. having thickness of 1.5 mm duly epoxy polyester powder coated. Intermediate Raceway(optional) wherever is required above / below worktop, in aluminium alloy extrusion of size 100 mm ht. Linear workstation Size: 1400 (w) x 750 (D) x 750 (H) mm with side unit 900 x 450 x750(ht)
43	Providing and Placing ergonomically designed, comfortable and aesthetically appealing Mid back chair. The seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam having density 48 kg/m3. The seat shall be upholstered with fabric tapestry 0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover with breathable mesh tapestry. The backrest shall be made by keeping contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. The chair shall be supplied with PU adjustable arms. The chair shall have synchro tilt mechanism with 360 degree revolving with upright position locking. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with BIFMA standard class-3 gas lift to suit them using the lever under the seat.